1# SPDX-License-Identifier: GPL-2.0 2config PPC_PS3 3 bool "Sony PS3" 4 depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN 5 select PPC_CELL 6 select USB_OHCI_LITTLE_ENDIAN 7 select USB_OHCI_BIG_ENDIAN_MMIO 8 select USB_EHCI_BIG_ENDIAN_MMIO 9 select PPC_PCI_CHOICE 10 help 11 This option enables support for the Sony PS3 game console 12 and other platforms using the PS3 hypervisor. Enabling this 13 option will allow building otheros.bld, a kernel image suitable 14 for programming into flash memory, and vmlinux, a kernel image 15 suitable for loading via kexec. 16 17menu "PS3 Platform Options" 18 depends on PPC_PS3 19 20config PS3_ADVANCED 21 depends on PPC_PS3 22 bool "PS3 Advanced configuration options" 23 help 24 This gives you access to some advanced options for the PS3. The 25 defaults should be fine for most users, but these options may make 26 it possible to better control the kernel configuration if you know 27 what you are doing. 28 29 Note that the answer to this question won't directly affect the 30 kernel: saying N will just cause the configurator to skip all 31 the questions about these options. 32 33 Most users should say N to this question. 34 35config PS3_HTAB_SIZE 36 depends on PPC_PS3 37 int "PS3 Platform pagetable size" if PS3_ADVANCED 38 range 18 20 39 default 20 40 help 41 This option is only for experts who may have the desire to fine 42 tune the pagetable size on their system. The value here is 43 expressed as the log2 of the page table size. Valid values are 44 18, 19, and 20, corresponding to 256KB, 512KB and 1MB respectively. 45 46 If unsure, choose the default (20) with the confidence that your 47 system will have optimal runtime performance. 48 49config PS3_DYNAMIC_DMA 50 depends on PPC_PS3 51 bool "PS3 Platform dynamic DMA page table management" 52 help 53 This option will enable kernel support to take advantage of the 54 per device dynamic DMA page table management provided by the Cell 55 processor's IO Controller. This support incurs some runtime 56 overhead and also slightly increases kernel memory usage. The 57 current implementation should be considered experimental. 58 59 This support is mainly for Linux kernel development. If unsure, 60 say N. 61 62config PS3_VUART 63 depends on PPC_PS3 64 tristate 65 66config PS3_PS3AV 67 depends on PPC_PS3 68 tristate "PS3 AV settings driver" if PS3_ADVANCED 69 select PS3_VUART 70 default y 71 help 72 Include support for the PS3 AV Settings driver. 73 74 This support is required for PS3 graphics and sound. In 75 general, all users will say Y or M. 76 77config PS3_SYS_MANAGER 78 depends on PPC_PS3 79 tristate "PS3 System Manager driver" if PS3_ADVANCED 80 select PS3_VUART 81 default y 82 help 83 Include support for the PS3 System Manager. 84 85 This support is required for PS3 system control. In 86 general, all users will say Y or M. 87 88config PS3_REPOSITORY_WRITE 89 bool "PS3 Repository write support" if PS3_ADVANCED 90 depends on PPC_PS3 91 help 92 Enables support for writing to the PS3 System Repository. 93 94 This support is intended for bootloaders that need to store data 95 in the repository for later boot stages. 96 97 If in doubt, say N here and reduce the size of the kernel by a 98 small amount. 99 100config PS3_STORAGE 101 depends on PPC_PS3 102 tristate 103 104config PS3_DISK 105 tristate "PS3 Disk Storage Driver" 106 depends on PPC_PS3 && BLOCK 107 select PS3_STORAGE 108 help 109 Include support for the PS3 Disk Storage. 110 111 This support is required to access the PS3 hard disk. 112 In general, all users will say Y or M. 113 114config PS3_ROM 115 tristate "PS3 BD/DVD/CD-ROM Storage Driver" 116 depends on PPC_PS3 && SCSI 117 select PS3_STORAGE 118 help 119 Include support for the PS3 ROM Storage. 120 121 This support is required to access the PS3 BD/DVD/CD-ROM drive. 122 In general, all users will say Y or M. 123 Also make sure to say Y or M to "SCSI CDROM support" later. 124 125config PS3_FLASH 126 tristate "PS3 FLASH ROM Storage Driver" 127 depends on PPC_PS3 128 select PS3_STORAGE 129 help 130 Include support for the PS3 FLASH ROM Storage. 131 132 This support is required to access the PS3 FLASH ROM, which 133 contains the boot loader and some boot options. 134 In general, PS3 OtherOS users will say Y or M. 135 136 As this driver needs a fixed buffer of 256 KiB of memory, it can 137 be disabled on the kernel command line using "ps3flash=off", to 138 not allocate this fixed buffer. 139 140config PS3_VRAM 141 tristate "PS3 Video RAM Storage Driver" 142 depends on FB_PS3=y && BLOCK && m 143 help 144 This driver allows you to use excess PS3 video RAM as volatile 145 storage or system swap. 146 147config PS3_LPM 148 tristate "PS3 Logical Performance Monitor support" 149 depends on PPC_PS3 150 help 151 Include support for the PS3 Logical Performance Monitor. 152 153 This support is required to use the logical performance monitor 154 of the PS3's LV1 hypervisor. 155 156 If you intend to use the advanced performance monitoring and 157 profiling support of the Cell processor with programs like 158 oprofile and perfmon2, then say Y or M, otherwise say N. 159 160config PS3GELIC_UDBG 161 bool "PS3 udbg output via UDP broadcasts on Ethernet" 162 depends on PPC_PS3 163 help 164 Enables udbg early debugging output by sending broadcast UDP 165 via the Ethernet port (UDP port number 18194). 166 167 This driver uses a trivial implementation and is independent 168 from the main PS3 gelic network driver. 169 170 If in doubt, say N here. 171 172endmenu 173