1# SPDX-License-Identifier: GPL-2.0 2config PPC_PS3 3 bool "Sony PS3" 4 depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN 5 select PPC_CELL 6 select USB_OHCI_LITTLE_ENDIAN 7 select USB_OHCI_BIG_ENDIAN_MMIO 8 select USB_EHCI_BIG_ENDIAN_MMIO 9 select PPC_PCI_CHOICE 10 help 11 This option enables support for the Sony PS3 game console 12 and other platforms using the PS3 hypervisor. Enabling this 13 option will allow building otheros.bld, a kernel image suitable 14 for programming into flash memory, and vmlinux, a kernel image 15 suitable for loading via kexec. 16 17menu "PS3 Platform Options" 18 depends on PPC_PS3 19 20config PS3_ADVANCED 21 depends on PPC_PS3 22 bool "PS3 Advanced configuration options" 23 help 24 This gives you access to some advanced options for the PS3. The 25 defaults should be fine for most users, but these options may make 26 it possible to better control the kernel configuration if you know 27 what you are doing. 28 29 Note that the answer to this question won't directly affect the 30 kernel: saying N will just cause the configurator to skip all 31 the questions about these options. 32 33 Most users should say N to this question. 34 35config PS3_HTAB_SIZE 36 depends on PPC_PS3 37 int "PS3 Platform pagetable size" if PS3_ADVANCED 38 range 18 20 39 default 20 40 help 41 This option is only for experts who may have the desire to fine 42 tune the pagetable size on their system. The value here is 43 expressed as the log2 of the page table size. Valid values are 44 18, 19, and 20, corresponding to 256KB, 512KB and 1MB respectively. 45 46 If unsure, choose the default (20) with the confidence that your 47 system will have optimal runtime performance. 48 49config PS3_DYNAMIC_DMA 50 depends on PPC_PS3 51 bool "PS3 Platform dynamic DMA page table management" 52 default n 53 help 54 This option will enable kernel support to take advantage of the 55 per device dynamic DMA page table management provided by the Cell 56 processor's IO Controller. This support incurs some runtime 57 overhead and also slightly increases kernel memory usage. The 58 current implementation should be considered experimental. 59 60 This support is mainly for Linux kernel development. If unsure, 61 say N. 62 63config PS3_VUART 64 depends on PPC_PS3 65 tristate 66 67config PS3_PS3AV 68 depends on PPC_PS3 69 tristate "PS3 AV settings driver" if PS3_ADVANCED 70 select PS3_VUART 71 default y 72 help 73 Include support for the PS3 AV Settings driver. 74 75 This support is required for PS3 graphics and sound. In 76 general, all users will say Y or M. 77 78config PS3_SYS_MANAGER 79 depends on PPC_PS3 80 tristate "PS3 System Manager driver" if PS3_ADVANCED 81 select PS3_VUART 82 default y 83 help 84 Include support for the PS3 System Manager. 85 86 This support is required for PS3 system control. In 87 general, all users will say Y or M. 88 89config PS3_REPOSITORY_WRITE 90 bool "PS3 Repository write support" if PS3_ADVANCED 91 depends on PPC_PS3 92 default n 93 help 94 Enables support for writing to the PS3 System Repository. 95 96 This support is intended for bootloaders that need to store data 97 in the repository for later boot stages. 98 99 If in doubt, say N here and reduce the size of the kernel by a 100 small amount. 101 102config PS3_STORAGE 103 depends on PPC_PS3 104 tristate 105 106config PS3_DISK 107 tristate "PS3 Disk Storage Driver" 108 depends on PPC_PS3 && BLOCK 109 select PS3_STORAGE 110 help 111 Include support for the PS3 Disk Storage. 112 113 This support is required to access the PS3 hard disk. 114 In general, all users will say Y or M. 115 116config PS3_ROM 117 tristate "PS3 BD/DVD/CD-ROM Storage Driver" 118 depends on PPC_PS3 && SCSI 119 select PS3_STORAGE 120 help 121 Include support for the PS3 ROM Storage. 122 123 This support is required to access the PS3 BD/DVD/CD-ROM drive. 124 In general, all users will say Y or M. 125 Also make sure to say Y or M to "SCSI CDROM support" later. 126 127config PS3_FLASH 128 tristate "PS3 FLASH ROM Storage Driver" 129 depends on PPC_PS3 130 select PS3_STORAGE 131 help 132 Include support for the PS3 FLASH ROM Storage. 133 134 This support is required to access the PS3 FLASH ROM, which 135 contains the boot loader and some boot options. 136 In general, PS3 OtherOS users will say Y or M. 137 138 As this driver needs a fixed buffer of 256 KiB of memory, it can 139 be disabled on the kernel command line using "ps3flash=off", to 140 not allocate this fixed buffer. 141 142config PS3_VRAM 143 tristate "PS3 Video RAM Storage Driver" 144 depends on FB_PS3=y && BLOCK && m 145 help 146 This driver allows you to use excess PS3 video RAM as volatile 147 storage or system swap. 148 149config PS3_LPM 150 tristate "PS3 Logical Performance Monitor support" 151 depends on PPC_PS3 152 help 153 Include support for the PS3 Logical Performance Monitor. 154 155 This support is required to use the logical performance monitor 156 of the PS3's LV1 hypervisor. 157 158 If you intend to use the advanced performance monitoring and 159 profiling support of the Cell processor with programs like 160 oprofile and perfmon2, then say Y or M, otherwise say N. 161 162config PS3GELIC_UDBG 163 bool "PS3 udbg output via UDP broadcasts on Ethernet" 164 depends on PPC_PS3 165 help 166 Enables udbg early debugging output by sending broadcast UDP 167 via the Ethernet port (UDP port number 18194). 168 169 This driver uses a trivial implementation and is independent 170 from the main PS3 gelic network driver. 171 172 If in doubt, say N here. 173 174endmenu 175