1 /*
2  * Support PCI/PCIe on PowerNV platforms
3  *
4  * Currently supports only P5IOC2
5  *
6  * Copyright 2011 Benjamin Herrenschmidt, IBM Corp.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License
10  * as published by the Free Software Foundation; either version
11  * 2 of the License, or (at your option) any later version.
12  */
13 
14 #include <linux/kernel.h>
15 #include <linux/pci.h>
16 #include <linux/delay.h>
17 #include <linux/string.h>
18 #include <linux/init.h>
19 #include <linux/bootmem.h>
20 #include <linux/irq.h>
21 #include <linux/io.h>
22 #include <linux/msi.h>
23 #include <linux/iommu.h>
24 
25 #include <asm/sections.h>
26 #include <asm/io.h>
27 #include <asm/prom.h>
28 #include <asm/pci-bridge.h>
29 #include <asm/machdep.h>
30 #include <asm/msi_bitmap.h>
31 #include <asm/ppc-pci.h>
32 #include <asm/opal.h>
33 #include <asm/iommu.h>
34 #include <asm/tce.h>
35 #include <asm/firmware.h>
36 #include <asm/eeh_event.h>
37 #include <asm/eeh.h>
38 
39 #include "powernv.h"
40 #include "pci.h"
41 
42 /* Delay in usec */
43 #define PCI_RESET_DELAY_US	3000000
44 
45 #define cfg_dbg(fmt...)	do { } while(0)
46 //#define cfg_dbg(fmt...)	printk(fmt)
47 
48 #ifdef CONFIG_PCI_MSI
49 static int pnv_msi_check_device(struct pci_dev* pdev, int nvec, int type)
50 {
51 	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
52 	struct pnv_phb *phb = hose->private_data;
53 	struct pci_dn *pdn = pci_get_pdn(pdev);
54 
55 	if (pdn && pdn->force_32bit_msi && !phb->msi32_support)
56 		return -ENODEV;
57 
58 	return (phb && phb->msi_bmp.bitmap) ? 0 : -ENODEV;
59 }
60 
61 static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
62 {
63 	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
64 	struct pnv_phb *phb = hose->private_data;
65 	struct msi_desc *entry;
66 	struct msi_msg msg;
67 	int hwirq;
68 	unsigned int virq;
69 	int rc;
70 
71 	if (WARN_ON(!phb))
72 		return -ENODEV;
73 
74 	list_for_each_entry(entry, &pdev->msi_list, list) {
75 		if (!entry->msi_attrib.is_64 && !phb->msi32_support) {
76 			pr_warn("%s: Supports only 64-bit MSIs\n",
77 				pci_name(pdev));
78 			return -ENXIO;
79 		}
80 		hwirq = msi_bitmap_alloc_hwirqs(&phb->msi_bmp, 1);
81 		if (hwirq < 0) {
82 			pr_warn("%s: Failed to find a free MSI\n",
83 				pci_name(pdev));
84 			return -ENOSPC;
85 		}
86 		virq = irq_create_mapping(NULL, phb->msi_base + hwirq);
87 		if (virq == NO_IRQ) {
88 			pr_warn("%s: Failed to map MSI to linux irq\n",
89 				pci_name(pdev));
90 			msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq, 1);
91 			return -ENOMEM;
92 		}
93 		rc = phb->msi_setup(phb, pdev, phb->msi_base + hwirq,
94 				    virq, entry->msi_attrib.is_64, &msg);
95 		if (rc) {
96 			pr_warn("%s: Failed to setup MSI\n", pci_name(pdev));
97 			irq_dispose_mapping(virq);
98 			msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq, 1);
99 			return rc;
100 		}
101 		irq_set_msi_desc(virq, entry);
102 		write_msi_msg(virq, &msg);
103 	}
104 	return 0;
105 }
106 
107 static void pnv_teardown_msi_irqs(struct pci_dev *pdev)
108 {
109 	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
110 	struct pnv_phb *phb = hose->private_data;
111 	struct msi_desc *entry;
112 
113 	if (WARN_ON(!phb))
114 		return;
115 
116 	list_for_each_entry(entry, &pdev->msi_list, list) {
117 		if (entry->irq == NO_IRQ)
118 			continue;
119 		irq_set_msi_desc(entry->irq, NULL);
120 		msi_bitmap_free_hwirqs(&phb->msi_bmp,
121 			virq_to_hw(entry->irq) - phb->msi_base, 1);
122 		irq_dispose_mapping(entry->irq);
123 	}
124 }
125 #endif /* CONFIG_PCI_MSI */
126 
127 static void pnv_pci_dump_p7ioc_diag_data(struct pnv_phb *phb)
128 {
129 	struct OpalIoP7IOCPhbErrorData *data = &phb->diag.p7ioc;
130 	int i;
131 
132 	pr_info("PHB %d diagnostic data:\n", phb->hose->global_number);
133 
134 	pr_info("  brdgCtl              = 0x%08x\n", data->brdgCtl);
135 
136 	pr_info("  portStatusReg        = 0x%08x\n", data->portStatusReg);
137 	pr_info("  rootCmplxStatus      = 0x%08x\n", data->rootCmplxStatus);
138 	pr_info("  busAgentStatus       = 0x%08x\n", data->busAgentStatus);
139 
140 	pr_info("  deviceStatus         = 0x%08x\n", data->deviceStatus);
141 	pr_info("  slotStatus           = 0x%08x\n", data->slotStatus);
142 	pr_info("  linkStatus           = 0x%08x\n", data->linkStatus);
143 	pr_info("  devCmdStatus         = 0x%08x\n", data->devCmdStatus);
144 	pr_info("  devSecStatus         = 0x%08x\n", data->devSecStatus);
145 
146 	pr_info("  rootErrorStatus      = 0x%08x\n", data->rootErrorStatus);
147 	pr_info("  uncorrErrorStatus    = 0x%08x\n", data->uncorrErrorStatus);
148 	pr_info("  corrErrorStatus      = 0x%08x\n", data->corrErrorStatus);
149 	pr_info("  tlpHdr1              = 0x%08x\n", data->tlpHdr1);
150 	pr_info("  tlpHdr2              = 0x%08x\n", data->tlpHdr2);
151 	pr_info("  tlpHdr3              = 0x%08x\n", data->tlpHdr3);
152 	pr_info("  tlpHdr4              = 0x%08x\n", data->tlpHdr4);
153 	pr_info("  sourceId             = 0x%08x\n", data->sourceId);
154 
155 	pr_info("  errorClass           = 0x%016llx\n", data->errorClass);
156 	pr_info("  correlator           = 0x%016llx\n", data->correlator);
157 
158 	pr_info("  p7iocPlssr           = 0x%016llx\n", data->p7iocPlssr);
159 	pr_info("  p7iocCsr             = 0x%016llx\n", data->p7iocCsr);
160 	pr_info("  lemFir               = 0x%016llx\n", data->lemFir);
161 	pr_info("  lemErrorMask         = 0x%016llx\n", data->lemErrorMask);
162 	pr_info("  lemWOF               = 0x%016llx\n", data->lemWOF);
163 	pr_info("  phbErrorStatus       = 0x%016llx\n", data->phbErrorStatus);
164 	pr_info("  phbFirstErrorStatus  = 0x%016llx\n", data->phbFirstErrorStatus);
165 	pr_info("  phbErrorLog0         = 0x%016llx\n", data->phbErrorLog0);
166 	pr_info("  phbErrorLog1         = 0x%016llx\n", data->phbErrorLog1);
167 	pr_info("  mmioErrorStatus      = 0x%016llx\n", data->mmioErrorStatus);
168 	pr_info("  mmioFirstErrorStatus = 0x%016llx\n", data->mmioFirstErrorStatus);
169 	pr_info("  mmioErrorLog0        = 0x%016llx\n", data->mmioErrorLog0);
170 	pr_info("  mmioErrorLog1        = 0x%016llx\n", data->mmioErrorLog1);
171 	pr_info("  dma0ErrorStatus      = 0x%016llx\n", data->dma0ErrorStatus);
172 	pr_info("  dma0FirstErrorStatus = 0x%016llx\n", data->dma0FirstErrorStatus);
173 	pr_info("  dma0ErrorLog0        = 0x%016llx\n", data->dma0ErrorLog0);
174 	pr_info("  dma0ErrorLog1        = 0x%016llx\n", data->dma0ErrorLog1);
175 	pr_info("  dma1ErrorStatus      = 0x%016llx\n", data->dma1ErrorStatus);
176 	pr_info("  dma1FirstErrorStatus = 0x%016llx\n", data->dma1FirstErrorStatus);
177 	pr_info("  dma1ErrorLog0        = 0x%016llx\n", data->dma1ErrorLog0);
178 	pr_info("  dma1ErrorLog1        = 0x%016llx\n", data->dma1ErrorLog1);
179 
180 	for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) {
181 		if ((data->pestA[i] >> 63) == 0 &&
182 		    (data->pestB[i] >> 63) == 0)
183 			continue;
184 		pr_info("  PE[%3d] PESTA        = 0x%016llx\n", i, data->pestA[i]);
185 		pr_info("          PESTB        = 0x%016llx\n", data->pestB[i]);
186 	}
187 }
188 
189 static void pnv_pci_dump_phb_diag_data(struct pnv_phb *phb)
190 {
191 	switch(phb->model) {
192 	case PNV_PHB_MODEL_P7IOC:
193 		pnv_pci_dump_p7ioc_diag_data(phb);
194 		break;
195 	default:
196 		pr_warning("PCI %d: Can't decode this PHB diag data\n",
197 			   phb->hose->global_number);
198 	}
199 }
200 
201 static void pnv_pci_handle_eeh_config(struct pnv_phb *phb, u32 pe_no)
202 {
203 	unsigned long flags, rc;
204 	int has_diag;
205 
206 	spin_lock_irqsave(&phb->lock, flags);
207 
208 	rc = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag.blob,
209 					 PNV_PCI_DIAG_BUF_SIZE);
210 	has_diag = (rc == OPAL_SUCCESS);
211 
212 	rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
213 				       OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
214 	if (rc) {
215 		pr_warning("PCI %d: Failed to clear EEH freeze state"
216 			   " for PE#%d, err %ld\n",
217 			   phb->hose->global_number, pe_no, rc);
218 
219 		/* For now, let's only display the diag buffer when we fail to clear
220 		 * the EEH status. We'll do more sensible things later when we have
221 		 * proper EEH support. We need to make sure we don't pollute ourselves
222 		 * with the normal errors generated when probing empty slots
223 		 */
224 		if (has_diag)
225 			pnv_pci_dump_phb_diag_data(phb);
226 		else
227 			pr_warning("PCI %d: No diag data available\n",
228 				   phb->hose->global_number);
229 	}
230 
231 	spin_unlock_irqrestore(&phb->lock, flags);
232 }
233 
234 static void pnv_pci_config_check_eeh(struct pnv_phb *phb,
235 				     struct device_node *dn)
236 {
237 	s64	rc;
238 	u8	fstate;
239 	__be16	pcierr;
240 	u32	pe_no;
241 
242 	/*
243 	 * Get the PE#. During the PCI probe stage, we might not
244 	 * setup that yet. So all ER errors should be mapped to
245 	 * reserved PE.
246 	 */
247 	pe_no = PCI_DN(dn)->pe_number;
248 	if (pe_no == IODA_INVALID_PE) {
249 		if (phb->type == PNV_PHB_P5IOC2)
250 			pe_no = 0;
251 		else
252 			pe_no = phb->ioda.reserved_pe;
253 	}
254 
255 	/* Read freeze status */
256 	rc = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, &fstate, &pcierr,
257 					NULL);
258 	if (rc) {
259 		pr_warning("%s: Can't read EEH status (PE#%d) for "
260 			   "%s, err %lld\n",
261 			   __func__, pe_no, dn->full_name, rc);
262 		return;
263 	}
264 	cfg_dbg(" -> EEH check, bdfn=%04x PE#%d fstate=%x\n",
265 		(PCI_DN(dn)->busno << 8) | (PCI_DN(dn)->devfn),
266 		pe_no, fstate);
267 	if (fstate != 0)
268 		pnv_pci_handle_eeh_config(phb, pe_no);
269 }
270 
271 int pnv_pci_cfg_read(struct device_node *dn,
272 		     int where, int size, u32 *val)
273 {
274 	struct pci_dn *pdn = PCI_DN(dn);
275 	struct pnv_phb *phb = pdn->phb->private_data;
276 	u32 bdfn = (pdn->busno << 8) | pdn->devfn;
277 #ifdef CONFIG_EEH
278 	struct eeh_pe *phb_pe = NULL;
279 #endif
280 	s64 rc;
281 
282 	switch (size) {
283 	case 1: {
284 		u8 v8;
285 		rc = opal_pci_config_read_byte(phb->opal_id, bdfn, where, &v8);
286 		*val = (rc == OPAL_SUCCESS) ? v8 : 0xff;
287 		break;
288 	}
289 	case 2: {
290 		__be16 v16;
291 		rc = opal_pci_config_read_half_word(phb->opal_id, bdfn, where,
292 						   &v16);
293 		*val = (rc == OPAL_SUCCESS) ? be16_to_cpu(v16) : 0xffff;
294 		break;
295 	}
296 	case 4: {
297 		__be32 v32;
298 		rc = opal_pci_config_read_word(phb->opal_id, bdfn, where, &v32);
299 		*val = (rc == OPAL_SUCCESS) ? be32_to_cpu(v32) : 0xffffffff;
300 		break;
301 	}
302 	default:
303 		return PCIBIOS_FUNC_NOT_SUPPORTED;
304 	}
305 	cfg_dbg("%s: bus: %x devfn: %x +%x/%x -> %08x\n",
306 		__func__, pdn->busno, pdn->devfn, where, size, *val);
307 
308 	/*
309 	 * Check if the specified PE has been put into frozen
310 	 * state. On the other hand, we needn't do that while
311 	 * the PHB has been put into frozen state because of
312 	 * PHB-fatal errors.
313 	 */
314 #ifdef CONFIG_EEH
315 	phb_pe = eeh_phb_pe_get(pdn->phb);
316 	if (phb_pe && (phb_pe->state & EEH_PE_ISOLATED))
317 		return PCIBIOS_SUCCESSFUL;
318 
319 	if (phb->eeh_state & PNV_EEH_STATE_ENABLED) {
320 		if (*val == EEH_IO_ERROR_VALUE(size) &&
321 		    eeh_dev_check_failure(of_node_to_eeh_dev(dn)))
322 			return PCIBIOS_DEVICE_NOT_FOUND;
323 	} else {
324 		pnv_pci_config_check_eeh(phb, dn);
325 	}
326 #else
327 	pnv_pci_config_check_eeh(phb, dn);
328 #endif
329 
330 	return PCIBIOS_SUCCESSFUL;
331 }
332 
333 int pnv_pci_cfg_write(struct device_node *dn,
334 		      int where, int size, u32 val)
335 {
336 	struct pci_dn *pdn = PCI_DN(dn);
337 	struct pnv_phb *phb = pdn->phb->private_data;
338 	u32 bdfn = (pdn->busno << 8) | pdn->devfn;
339 
340 	cfg_dbg("%s: bus: %x devfn: %x +%x/%x -> %08x\n",
341 		pdn->busno, pdn->devfn, where, size, val);
342 	switch (size) {
343 	case 1:
344 		opal_pci_config_write_byte(phb->opal_id, bdfn, where, val);
345 		break;
346 	case 2:
347 		opal_pci_config_write_half_word(phb->opal_id, bdfn, where, val);
348 		break;
349 	case 4:
350 		opal_pci_config_write_word(phb->opal_id, bdfn, where, val);
351 		break;
352 	default:
353 		return PCIBIOS_FUNC_NOT_SUPPORTED;
354 	}
355 
356 	/* Check if the PHB got frozen due to an error (no response) */
357 #ifdef CONFIG_EEH
358 	if (!(phb->eeh_state & PNV_EEH_STATE_ENABLED))
359 		pnv_pci_config_check_eeh(phb, dn);
360 #else
361 	pnv_pci_config_check_eeh(phb, dn);
362 #endif
363 
364 	return PCIBIOS_SUCCESSFUL;
365 }
366 
367 static int pnv_pci_read_config(struct pci_bus *bus,
368 			       unsigned int devfn,
369 			       int where, int size, u32 *val)
370 {
371 	struct device_node *dn, *busdn = pci_bus_to_OF_node(bus);
372 	struct pci_dn *pdn;
373 
374 	for (dn = busdn->child; dn; dn = dn->sibling) {
375 		pdn = PCI_DN(dn);
376 		if (pdn && pdn->devfn == devfn)
377 			return pnv_pci_cfg_read(dn, where, size, val);
378 	}
379 
380 	*val = 0xFFFFFFFF;
381 	return PCIBIOS_DEVICE_NOT_FOUND;
382 
383 }
384 
385 static int pnv_pci_write_config(struct pci_bus *bus,
386 				unsigned int devfn,
387 				int where, int size, u32 val)
388 {
389 	struct device_node *dn, *busdn = pci_bus_to_OF_node(bus);
390 	struct pci_dn *pdn;
391 
392 	for (dn = busdn->child; dn; dn = dn->sibling) {
393 		pdn = PCI_DN(dn);
394 		if (pdn && pdn->devfn == devfn)
395 			return pnv_pci_cfg_write(dn, where, size, val);
396 	}
397 
398 	return PCIBIOS_DEVICE_NOT_FOUND;
399 }
400 
401 struct pci_ops pnv_pci_ops = {
402 	.read  = pnv_pci_read_config,
403 	.write = pnv_pci_write_config,
404 };
405 
406 static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
407 			 unsigned long uaddr, enum dma_data_direction direction,
408 			 struct dma_attrs *attrs, bool rm)
409 {
410 	u64 proto_tce;
411 	__be64 *tcep, *tces;
412 	u64 rpn;
413 
414 	proto_tce = TCE_PCI_READ; // Read allowed
415 
416 	if (direction != DMA_TO_DEVICE)
417 		proto_tce |= TCE_PCI_WRITE;
418 
419 	tces = tcep = ((__be64 *)tbl->it_base) + index - tbl->it_offset;
420 	rpn = __pa(uaddr) >> TCE_SHIFT;
421 
422 	while (npages--)
423 		*(tcep++) = cpu_to_be64(proto_tce | (rpn++ << TCE_RPN_SHIFT));
424 
425 	/* Some implementations won't cache invalid TCEs and thus may not
426 	 * need that flush. We'll probably turn it_type into a bit mask
427 	 * of flags if that becomes the case
428 	 */
429 	if (tbl->it_type & TCE_PCI_SWINV_CREATE)
430 		pnv_pci_ioda_tce_invalidate(tbl, tces, tcep - 1, rm);
431 
432 	return 0;
433 }
434 
435 static int pnv_tce_build_vm(struct iommu_table *tbl, long index, long npages,
436 			    unsigned long uaddr,
437 			    enum dma_data_direction direction,
438 			    struct dma_attrs *attrs)
439 {
440 	return pnv_tce_build(tbl, index, npages, uaddr, direction, attrs,
441 			false);
442 }
443 
444 static void pnv_tce_free(struct iommu_table *tbl, long index, long npages,
445 		bool rm)
446 {
447 	__be64 *tcep, *tces;
448 
449 	tces = tcep = ((__be64 *)tbl->it_base) + index - tbl->it_offset;
450 
451 	while (npages--)
452 		*(tcep++) = cpu_to_be64(0);
453 
454 	if (tbl->it_type & TCE_PCI_SWINV_FREE)
455 		pnv_pci_ioda_tce_invalidate(tbl, tces, tcep - 1, rm);
456 }
457 
458 static void pnv_tce_free_vm(struct iommu_table *tbl, long index, long npages)
459 {
460 	pnv_tce_free(tbl, index, npages, false);
461 }
462 
463 static unsigned long pnv_tce_get(struct iommu_table *tbl, long index)
464 {
465 	return ((u64 *)tbl->it_base)[index - tbl->it_offset];
466 }
467 
468 static int pnv_tce_build_rm(struct iommu_table *tbl, long index, long npages,
469 			    unsigned long uaddr,
470 			    enum dma_data_direction direction,
471 			    struct dma_attrs *attrs)
472 {
473 	return pnv_tce_build(tbl, index, npages, uaddr, direction, attrs, true);
474 }
475 
476 static void pnv_tce_free_rm(struct iommu_table *tbl, long index, long npages)
477 {
478 	pnv_tce_free(tbl, index, npages, true);
479 }
480 
481 void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
482 			       void *tce_mem, u64 tce_size,
483 			       u64 dma_offset)
484 {
485 	tbl->it_blocksize = 16;
486 	tbl->it_base = (unsigned long)tce_mem;
487 	tbl->it_offset = dma_offset >> IOMMU_PAGE_SHIFT;
488 	tbl->it_index = 0;
489 	tbl->it_size = tce_size >> 3;
490 	tbl->it_busno = 0;
491 	tbl->it_type = TCE_PCI;
492 }
493 
494 static struct iommu_table *pnv_pci_setup_bml_iommu(struct pci_controller *hose)
495 {
496 	struct iommu_table *tbl;
497 	const __be64 *basep, *swinvp;
498 	const __be32 *sizep;
499 
500 	basep = of_get_property(hose->dn, "linux,tce-base", NULL);
501 	sizep = of_get_property(hose->dn, "linux,tce-size", NULL);
502 	if (basep == NULL || sizep == NULL) {
503 		pr_err("PCI: %s has missing tce entries !\n",
504 		       hose->dn->full_name);
505 		return NULL;
506 	}
507 	tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, hose->node);
508 	if (WARN_ON(!tbl))
509 		return NULL;
510 	pnv_pci_setup_iommu_table(tbl, __va(be64_to_cpup(basep)),
511 				  be32_to_cpup(sizep), 0);
512 	iommu_init_table(tbl, hose->node);
513 	iommu_register_group(tbl, pci_domain_nr(hose->bus), 0);
514 
515 	/* Deal with SW invalidated TCEs when needed (BML way) */
516 	swinvp = of_get_property(hose->dn, "linux,tce-sw-invalidate-info",
517 				 NULL);
518 	if (swinvp) {
519 		tbl->it_busno = be64_to_cpu(swinvp[1]);
520 		tbl->it_index = (unsigned long)ioremap(be64_to_cpup(swinvp), 8);
521 		tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
522 	}
523 	return tbl;
524 }
525 
526 static void pnv_pci_dma_fallback_setup(struct pci_controller *hose,
527 				       struct pci_dev *pdev)
528 {
529 	struct device_node *np = pci_bus_to_OF_node(hose->bus);
530 	struct pci_dn *pdn;
531 
532 	if (np == NULL)
533 		return;
534 	pdn = PCI_DN(np);
535 	if (!pdn->iommu_table)
536 		pdn->iommu_table = pnv_pci_setup_bml_iommu(hose);
537 	if (!pdn->iommu_table)
538 		return;
539 	set_iommu_table_base(&pdev->dev, pdn->iommu_table);
540 }
541 
542 static void pnv_pci_dma_dev_setup(struct pci_dev *pdev)
543 {
544 	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
545 	struct pnv_phb *phb = hose->private_data;
546 
547 	/* If we have no phb structure, try to setup a fallback based on
548 	 * the device-tree (RTAS PCI for example)
549 	 */
550 	if (phb && phb->dma_dev_setup)
551 		phb->dma_dev_setup(phb, pdev);
552 	else
553 		pnv_pci_dma_fallback_setup(hose, pdev);
554 }
555 
556 void pnv_pci_shutdown(void)
557 {
558 	struct pci_controller *hose;
559 
560 	list_for_each_entry(hose, &hose_list, list_node) {
561 		struct pnv_phb *phb = hose->private_data;
562 
563 		if (phb && phb->shutdown)
564 			phb->shutdown(phb);
565 	}
566 }
567 
568 /* Fixup wrong class code in p7ioc and p8 root complex */
569 static void pnv_p7ioc_rc_quirk(struct pci_dev *dev)
570 {
571 	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
572 }
573 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IBM, 0x3b9, pnv_p7ioc_rc_quirk);
574 
575 static int pnv_pci_probe_mode(struct pci_bus *bus)
576 {
577 	struct pci_controller *hose = pci_bus_to_host(bus);
578 	const __be64 *tstamp;
579 	u64 now, target;
580 
581 
582 	/* We hijack this as a way to ensure we have waited long
583 	 * enough since the reset was lifted on the PCI bus
584 	 */
585 	if (bus != hose->bus)
586 		return PCI_PROBE_NORMAL;
587 	tstamp = of_get_property(hose->dn, "reset-clear-timestamp", NULL);
588 	if (!tstamp || !*tstamp)
589 		return PCI_PROBE_NORMAL;
590 
591 	now = mftb() / tb_ticks_per_usec;
592 	target = (be64_to_cpup(tstamp) / tb_ticks_per_usec)
593 		+ PCI_RESET_DELAY_US;
594 
595 	pr_devel("pci %04d: Reset target: 0x%llx now: 0x%llx\n",
596 		 hose->global_number, target, now);
597 
598 	if (now < target)
599 		msleep((target - now + 999) / 1000);
600 
601 	return PCI_PROBE_NORMAL;
602 }
603 
604 void __init pnv_pci_init(void)
605 {
606 	struct device_node *np;
607 
608 	pci_add_flags(PCI_CAN_SKIP_ISA_ALIGN);
609 
610 	/* OPAL absent, try POPAL first then RTAS detection of PHBs */
611 	if (!firmware_has_feature(FW_FEATURE_OPAL)) {
612 #ifdef CONFIG_PPC_POWERNV_RTAS
613 		init_pci_config_tokens();
614 		find_and_init_phbs();
615 #endif /* CONFIG_PPC_POWERNV_RTAS */
616 	}
617 	/* OPAL is here, do our normal stuff */
618 	else {
619 		int found_ioda = 0;
620 
621 		/* Look for IODA IO-Hubs. We don't support mixing IODA
622 		 * and p5ioc2 due to the need to change some global
623 		 * probing flags
624 		 */
625 		for_each_compatible_node(np, NULL, "ibm,ioda-hub") {
626 			pnv_pci_init_ioda_hub(np);
627 			found_ioda = 1;
628 		}
629 
630 		/* Look for p5ioc2 IO-Hubs */
631 		if (!found_ioda)
632 			for_each_compatible_node(np, NULL, "ibm,p5ioc2")
633 				pnv_pci_init_p5ioc2_hub(np);
634 
635 		/* Look for ioda2 built-in PHB3's */
636 		for_each_compatible_node(np, NULL, "ibm,ioda2-phb")
637 			pnv_pci_init_ioda2_phb(np);
638 	}
639 
640 	/* Setup the linkage between OF nodes and PHBs */
641 	pci_devs_phb_init();
642 
643 	/* Configure IOMMU DMA hooks */
644 	ppc_md.pci_dma_dev_setup = pnv_pci_dma_dev_setup;
645 	ppc_md.tce_build = pnv_tce_build_vm;
646 	ppc_md.tce_free = pnv_tce_free_vm;
647 	ppc_md.tce_build_rm = pnv_tce_build_rm;
648 	ppc_md.tce_free_rm = pnv_tce_free_rm;
649 	ppc_md.tce_get = pnv_tce_get;
650 	ppc_md.pci_probe_mode = pnv_pci_probe_mode;
651 	set_pci_dma_ops(&dma_iommu_ops);
652 
653 	/* Configure MSIs */
654 #ifdef CONFIG_PCI_MSI
655 	ppc_md.msi_check_device = pnv_msi_check_device;
656 	ppc_md.setup_msi_irqs = pnv_setup_msi_irqs;
657 	ppc_md.teardown_msi_irqs = pnv_teardown_msi_irqs;
658 #endif
659 }
660