1 /* 2 * PowerNV OPAL high level interfaces 3 * 4 * Copyright 2011 IBM Corp. 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License 8 * as published by the Free Software Foundation; either version 9 * 2 of the License, or (at your option) any later version. 10 */ 11 12 #define pr_fmt(fmt) "opal: " fmt 13 14 #include <linux/printk.h> 15 #include <linux/types.h> 16 #include <linux/of.h> 17 #include <linux/of_fdt.h> 18 #include <linux/of_platform.h> 19 #include <linux/interrupt.h> 20 #include <linux/notifier.h> 21 #include <linux/slab.h> 22 #include <linux/sched.h> 23 #include <linux/kobject.h> 24 #include <linux/delay.h> 25 #include <linux/memblock.h> 26 #include <linux/kthread.h> 27 #include <linux/freezer.h> 28 29 #include <asm/machdep.h> 30 #include <asm/opal.h> 31 #include <asm/firmware.h> 32 #include <asm/mce.h> 33 34 #include "powernv.h" 35 36 /* /sys/firmware/opal */ 37 struct kobject *opal_kobj; 38 39 struct opal { 40 u64 base; 41 u64 entry; 42 u64 size; 43 } opal; 44 45 struct mcheck_recoverable_range { 46 u64 start_addr; 47 u64 end_addr; 48 u64 recover_addr; 49 }; 50 51 static struct mcheck_recoverable_range *mc_recoverable_range; 52 static int mc_recoverable_range_len; 53 54 struct device_node *opal_node; 55 static DEFINE_SPINLOCK(opal_write_lock); 56 static struct atomic_notifier_head opal_msg_notifier_head[OPAL_MSG_TYPE_MAX]; 57 static uint32_t opal_heartbeat; 58 static struct task_struct *kopald_tsk; 59 60 void opal_configure_cores(void) 61 { 62 /* Do the actual re-init, This will clobber all FPRs, VRs, etc... 63 * 64 * It will preserve non volatile GPRs and HSPRG0/1. It will 65 * also restore HIDs and other SPRs to their original value 66 * but it might clobber a bunch. 67 */ 68 #ifdef __BIG_ENDIAN__ 69 opal_reinit_cpus(OPAL_REINIT_CPUS_HILE_BE); 70 #else 71 opal_reinit_cpus(OPAL_REINIT_CPUS_HILE_LE); 72 #endif 73 74 /* Restore some bits */ 75 if (cur_cpu_spec->cpu_restore) 76 cur_cpu_spec->cpu_restore(); 77 } 78 79 int __init early_init_dt_scan_opal(unsigned long node, 80 const char *uname, int depth, void *data) 81 { 82 const void *basep, *entryp, *sizep; 83 int basesz, entrysz, runtimesz; 84 85 if (depth != 1 || strcmp(uname, "ibm,opal") != 0) 86 return 0; 87 88 basep = of_get_flat_dt_prop(node, "opal-base-address", &basesz); 89 entryp = of_get_flat_dt_prop(node, "opal-entry-address", &entrysz); 90 sizep = of_get_flat_dt_prop(node, "opal-runtime-size", &runtimesz); 91 92 if (!basep || !entryp || !sizep) 93 return 1; 94 95 opal.base = of_read_number(basep, basesz/4); 96 opal.entry = of_read_number(entryp, entrysz/4); 97 opal.size = of_read_number(sizep, runtimesz/4); 98 99 pr_debug("OPAL Base = 0x%llx (basep=%p basesz=%d)\n", 100 opal.base, basep, basesz); 101 pr_debug("OPAL Entry = 0x%llx (entryp=%p basesz=%d)\n", 102 opal.entry, entryp, entrysz); 103 pr_debug("OPAL Entry = 0x%llx (sizep=%p runtimesz=%d)\n", 104 opal.size, sizep, runtimesz); 105 106 if (of_flat_dt_is_compatible(node, "ibm,opal-v3")) { 107 powerpc_firmware_features |= FW_FEATURE_OPAL; 108 pr_info("OPAL detected !\n"); 109 } else { 110 panic("OPAL != V3 detected, no longer supported.\n"); 111 } 112 113 return 1; 114 } 115 116 int __init early_init_dt_scan_recoverable_ranges(unsigned long node, 117 const char *uname, int depth, void *data) 118 { 119 int i, psize, size; 120 const __be32 *prop; 121 122 if (depth != 1 || strcmp(uname, "ibm,opal") != 0) 123 return 0; 124 125 prop = of_get_flat_dt_prop(node, "mcheck-recoverable-ranges", &psize); 126 127 if (!prop) 128 return 1; 129 130 pr_debug("Found machine check recoverable ranges.\n"); 131 132 /* 133 * Calculate number of available entries. 134 * 135 * Each recoverable address range entry is (start address, len, 136 * recovery address), 2 cells each for start and recovery address, 137 * 1 cell for len, totalling 5 cells per entry. 138 */ 139 mc_recoverable_range_len = psize / (sizeof(*prop) * 5); 140 141 /* Sanity check */ 142 if (!mc_recoverable_range_len) 143 return 1; 144 145 /* Size required to hold all the entries. */ 146 size = mc_recoverable_range_len * 147 sizeof(struct mcheck_recoverable_range); 148 149 /* 150 * Allocate a buffer to hold the MC recoverable ranges. We would be 151 * accessing them in real mode, hence it needs to be within 152 * RMO region. 153 */ 154 mc_recoverable_range =__va(memblock_alloc_base(size, __alignof__(u64), 155 ppc64_rma_size)); 156 memset(mc_recoverable_range, 0, size); 157 158 for (i = 0; i < mc_recoverable_range_len; i++) { 159 mc_recoverable_range[i].start_addr = 160 of_read_number(prop + (i * 5) + 0, 2); 161 mc_recoverable_range[i].end_addr = 162 mc_recoverable_range[i].start_addr + 163 of_read_number(prop + (i * 5) + 2, 1); 164 mc_recoverable_range[i].recover_addr = 165 of_read_number(prop + (i * 5) + 3, 2); 166 167 pr_debug("Machine check recoverable range: %llx..%llx: %llx\n", 168 mc_recoverable_range[i].start_addr, 169 mc_recoverable_range[i].end_addr, 170 mc_recoverable_range[i].recover_addr); 171 } 172 return 1; 173 } 174 175 static int __init opal_register_exception_handlers(void) 176 { 177 #ifdef __BIG_ENDIAN__ 178 u64 glue; 179 180 if (!(powerpc_firmware_features & FW_FEATURE_OPAL)) 181 return -ENODEV; 182 183 /* Hookup some exception handlers except machine check. We use the 184 * fwnmi area at 0x7000 to provide the glue space to OPAL 185 */ 186 glue = 0x7000; 187 188 /* 189 * Check if we are running on newer firmware that exports 190 * OPAL_HANDLE_HMI token. If yes, then don't ask OPAL to patch 191 * the HMI interrupt and we catch it directly in Linux. 192 * 193 * For older firmware (i.e currently released POWER8 System Firmware 194 * as of today <= SV810_087), we fallback to old behavior and let OPAL 195 * patch the HMI vector and handle it inside OPAL firmware. 196 * 197 * For newer firmware (in development/yet to be released) we will 198 * start catching/handling HMI directly in Linux. 199 */ 200 if (!opal_check_token(OPAL_HANDLE_HMI)) { 201 pr_info("Old firmware detected, OPAL handles HMIs.\n"); 202 opal_register_exception_handler( 203 OPAL_HYPERVISOR_MAINTENANCE_HANDLER, 204 0, glue); 205 glue += 128; 206 } 207 208 opal_register_exception_handler(OPAL_SOFTPATCH_HANDLER, 0, glue); 209 #endif 210 211 return 0; 212 } 213 machine_early_initcall(powernv, opal_register_exception_handlers); 214 215 /* 216 * Opal message notifier based on message type. Allow subscribers to get 217 * notified for specific messgae type. 218 */ 219 int opal_message_notifier_register(enum opal_msg_type msg_type, 220 struct notifier_block *nb) 221 { 222 if (!nb || msg_type >= OPAL_MSG_TYPE_MAX) { 223 pr_warning("%s: Invalid arguments, msg_type:%d\n", 224 __func__, msg_type); 225 return -EINVAL; 226 } 227 228 return atomic_notifier_chain_register( 229 &opal_msg_notifier_head[msg_type], nb); 230 } 231 EXPORT_SYMBOL_GPL(opal_message_notifier_register); 232 233 int opal_message_notifier_unregister(enum opal_msg_type msg_type, 234 struct notifier_block *nb) 235 { 236 return atomic_notifier_chain_unregister( 237 &opal_msg_notifier_head[msg_type], nb); 238 } 239 EXPORT_SYMBOL_GPL(opal_message_notifier_unregister); 240 241 static void opal_message_do_notify(uint32_t msg_type, void *msg) 242 { 243 /* notify subscribers */ 244 atomic_notifier_call_chain(&opal_msg_notifier_head[msg_type], 245 msg_type, msg); 246 } 247 248 static void opal_handle_message(void) 249 { 250 s64 ret; 251 /* 252 * TODO: pre-allocate a message buffer depending on opal-msg-size 253 * value in /proc/device-tree. 254 */ 255 static struct opal_msg msg; 256 u32 type; 257 258 ret = opal_get_msg(__pa(&msg), sizeof(msg)); 259 /* No opal message pending. */ 260 if (ret == OPAL_RESOURCE) 261 return; 262 263 /* check for errors. */ 264 if (ret) { 265 pr_warning("%s: Failed to retrieve opal message, err=%lld\n", 266 __func__, ret); 267 return; 268 } 269 270 type = be32_to_cpu(msg.msg_type); 271 272 /* Sanity check */ 273 if (type >= OPAL_MSG_TYPE_MAX) { 274 pr_warn_once("%s: Unknown message type: %u\n", __func__, type); 275 return; 276 } 277 opal_message_do_notify(type, (void *)&msg); 278 } 279 280 static irqreturn_t opal_message_notify(int irq, void *data) 281 { 282 opal_handle_message(); 283 return IRQ_HANDLED; 284 } 285 286 static int __init opal_message_init(void) 287 { 288 int ret, i, irq; 289 290 for (i = 0; i < OPAL_MSG_TYPE_MAX; i++) 291 ATOMIC_INIT_NOTIFIER_HEAD(&opal_msg_notifier_head[i]); 292 293 irq = opal_event_request(ilog2(OPAL_EVENT_MSG_PENDING)); 294 if (!irq) { 295 pr_err("%s: Can't register OPAL event irq (%d)\n", 296 __func__, irq); 297 return irq; 298 } 299 300 ret = request_irq(irq, opal_message_notify, 301 IRQ_TYPE_LEVEL_HIGH, "opal-msg", NULL); 302 if (ret) { 303 pr_err("%s: Can't request OPAL event irq (%d)\n", 304 __func__, ret); 305 return ret; 306 } 307 308 return 0; 309 } 310 311 int opal_get_chars(uint32_t vtermno, char *buf, int count) 312 { 313 s64 rc; 314 __be64 evt, len; 315 316 if (!opal.entry) 317 return -ENODEV; 318 opal_poll_events(&evt); 319 if ((be64_to_cpu(evt) & OPAL_EVENT_CONSOLE_INPUT) == 0) 320 return 0; 321 len = cpu_to_be64(count); 322 rc = opal_console_read(vtermno, &len, buf); 323 if (rc == OPAL_SUCCESS) 324 return be64_to_cpu(len); 325 return 0; 326 } 327 328 int opal_put_chars(uint32_t vtermno, const char *data, int total_len) 329 { 330 int written = 0; 331 __be64 olen; 332 s64 len, rc; 333 unsigned long flags; 334 __be64 evt; 335 336 if (!opal.entry) 337 return -ENODEV; 338 339 /* We want put_chars to be atomic to avoid mangling of hvsi 340 * packets. To do that, we first test for room and return 341 * -EAGAIN if there isn't enough. 342 * 343 * Unfortunately, opal_console_write_buffer_space() doesn't 344 * appear to work on opal v1, so we just assume there is 345 * enough room and be done with it 346 */ 347 spin_lock_irqsave(&opal_write_lock, flags); 348 rc = opal_console_write_buffer_space(vtermno, &olen); 349 len = be64_to_cpu(olen); 350 if (rc || len < total_len) { 351 spin_unlock_irqrestore(&opal_write_lock, flags); 352 /* Closed -> drop characters */ 353 if (rc) 354 return total_len; 355 opal_poll_events(NULL); 356 return -EAGAIN; 357 } 358 359 /* We still try to handle partial completions, though they 360 * should no longer happen. 361 */ 362 rc = OPAL_BUSY; 363 while(total_len > 0 && (rc == OPAL_BUSY || 364 rc == OPAL_BUSY_EVENT || rc == OPAL_SUCCESS)) { 365 olen = cpu_to_be64(total_len); 366 rc = opal_console_write(vtermno, &olen, data); 367 len = be64_to_cpu(olen); 368 369 /* Closed or other error drop */ 370 if (rc != OPAL_SUCCESS && rc != OPAL_BUSY && 371 rc != OPAL_BUSY_EVENT) { 372 written = total_len; 373 break; 374 } 375 if (rc == OPAL_SUCCESS) { 376 total_len -= len; 377 data += len; 378 written += len; 379 } 380 /* This is a bit nasty but we need that for the console to 381 * flush when there aren't any interrupts. We will clean 382 * things a bit later to limit that to synchronous path 383 * such as the kernel console and xmon/udbg 384 */ 385 do 386 opal_poll_events(&evt); 387 while(rc == OPAL_SUCCESS && 388 (be64_to_cpu(evt) & OPAL_EVENT_CONSOLE_OUTPUT)); 389 } 390 spin_unlock_irqrestore(&opal_write_lock, flags); 391 return written; 392 } 393 394 static int opal_recover_mce(struct pt_regs *regs, 395 struct machine_check_event *evt) 396 { 397 int recovered = 0; 398 399 if (!(regs->msr & MSR_RI)) { 400 /* If MSR_RI isn't set, we cannot recover */ 401 pr_err("Machine check interrupt unrecoverable: MSR(RI=0)\n"); 402 recovered = 0; 403 } else if (evt->disposition == MCE_DISPOSITION_RECOVERED) { 404 /* Platform corrected itself */ 405 recovered = 1; 406 } else if (evt->severity == MCE_SEV_FATAL) { 407 /* Fatal machine check */ 408 pr_err("Machine check interrupt is fatal\n"); 409 recovered = 0; 410 } else if ((evt->severity == MCE_SEV_ERROR_SYNC) && 411 (user_mode(regs) && !is_global_init(current))) { 412 /* 413 * For now, kill the task if we have received exception when 414 * in userspace. 415 * 416 * TODO: Queue up this address for hwpoisioning later. 417 */ 418 _exception(SIGBUS, regs, BUS_MCEERR_AR, regs->nip); 419 recovered = 1; 420 } 421 return recovered; 422 } 423 424 int opal_machine_check(struct pt_regs *regs) 425 { 426 struct machine_check_event evt; 427 int ret; 428 429 if (!get_mce_event(&evt, MCE_EVENT_RELEASE)) 430 return 0; 431 432 /* Print things out */ 433 if (evt.version != MCE_V1) { 434 pr_err("Machine Check Exception, Unknown event version %d !\n", 435 evt.version); 436 return 0; 437 } 438 machine_check_print_event_info(&evt); 439 440 if (opal_recover_mce(regs, &evt)) 441 return 1; 442 443 /* 444 * Unrecovered machine check, we are heading to panic path. 445 * 446 * We may have hit this MCE in very early stage of kernel 447 * initialization even before opal-prd has started running. If 448 * this is the case then this MCE error may go un-noticed or 449 * un-analyzed if we go down panic path. We need to inform 450 * BMC/OCC about this error so that they can collect relevant 451 * data for error analysis before rebooting. 452 * Use opal_cec_reboot2(OPAL_REBOOT_PLATFORM_ERROR) to do so. 453 * This function may not return on BMC based system. 454 */ 455 ret = opal_cec_reboot2(OPAL_REBOOT_PLATFORM_ERROR, 456 "Unrecoverable Machine Check exception"); 457 if (ret == OPAL_UNSUPPORTED) { 458 pr_emerg("Reboot type %d not supported\n", 459 OPAL_REBOOT_PLATFORM_ERROR); 460 } 461 462 /* 463 * We reached here. There can be three possibilities: 464 * 1. We are running on a firmware level that do not support 465 * opal_cec_reboot2() 466 * 2. We are running on a firmware level that do not support 467 * OPAL_REBOOT_PLATFORM_ERROR reboot type. 468 * 3. We are running on FSP based system that does not need opal 469 * to trigger checkstop explicitly for error analysis. The FSP 470 * PRD component would have already got notified about this 471 * error through other channels. 472 * 473 * If hardware marked this as an unrecoverable MCE, we are 474 * going to panic anyway. Even if it didn't, it's not safe to 475 * continue at this point, so we should explicitly panic. 476 */ 477 478 panic("PowerNV Unrecovered Machine Check"); 479 return 0; 480 } 481 482 /* Early hmi handler called in real mode. */ 483 int opal_hmi_exception_early(struct pt_regs *regs) 484 { 485 s64 rc; 486 487 /* 488 * call opal hmi handler. Pass paca address as token. 489 * The return value OPAL_SUCCESS is an indication that there is 490 * an HMI event generated waiting to pull by Linux. 491 */ 492 rc = opal_handle_hmi(); 493 if (rc == OPAL_SUCCESS) { 494 local_paca->hmi_event_available = 1; 495 return 1; 496 } 497 return 0; 498 } 499 500 /* HMI exception handler called in virtual mode during check_irq_replay. */ 501 int opal_handle_hmi_exception(struct pt_regs *regs) 502 { 503 s64 rc; 504 __be64 evt = 0; 505 506 /* 507 * Check if HMI event is available. 508 * if Yes, then call opal_poll_events to pull opal messages and 509 * process them. 510 */ 511 if (!local_paca->hmi_event_available) 512 return 0; 513 514 local_paca->hmi_event_available = 0; 515 rc = opal_poll_events(&evt); 516 if (rc == OPAL_SUCCESS && evt) 517 opal_handle_events(be64_to_cpu(evt)); 518 519 return 1; 520 } 521 522 static uint64_t find_recovery_address(uint64_t nip) 523 { 524 int i; 525 526 for (i = 0; i < mc_recoverable_range_len; i++) 527 if ((nip >= mc_recoverable_range[i].start_addr) && 528 (nip < mc_recoverable_range[i].end_addr)) 529 return mc_recoverable_range[i].recover_addr; 530 return 0; 531 } 532 533 bool opal_mce_check_early_recovery(struct pt_regs *regs) 534 { 535 uint64_t recover_addr = 0; 536 537 if (!opal.base || !opal.size) 538 goto out; 539 540 if ((regs->nip >= opal.base) && 541 (regs->nip < (opal.base + opal.size))) 542 recover_addr = find_recovery_address(regs->nip); 543 544 /* 545 * Setup regs->nip to rfi into fixup address. 546 */ 547 if (recover_addr) 548 regs->nip = recover_addr; 549 550 out: 551 return !!recover_addr; 552 } 553 554 static int opal_sysfs_init(void) 555 { 556 opal_kobj = kobject_create_and_add("opal", firmware_kobj); 557 if (!opal_kobj) { 558 pr_warn("kobject_create_and_add opal failed\n"); 559 return -ENOMEM; 560 } 561 562 return 0; 563 } 564 565 static ssize_t symbol_map_read(struct file *fp, struct kobject *kobj, 566 struct bin_attribute *bin_attr, 567 char *buf, loff_t off, size_t count) 568 { 569 return memory_read_from_buffer(buf, count, &off, bin_attr->private, 570 bin_attr->size); 571 } 572 573 static BIN_ATTR_RO(symbol_map, 0); 574 575 static void opal_export_symmap(void) 576 { 577 const __be64 *syms; 578 unsigned int size; 579 struct device_node *fw; 580 int rc; 581 582 fw = of_find_node_by_path("/ibm,opal/firmware"); 583 if (!fw) 584 return; 585 syms = of_get_property(fw, "symbol-map", &size); 586 if (!syms || size != 2 * sizeof(__be64)) 587 return; 588 589 /* Setup attributes */ 590 bin_attr_symbol_map.private = __va(be64_to_cpu(syms[0])); 591 bin_attr_symbol_map.size = be64_to_cpu(syms[1]); 592 593 rc = sysfs_create_bin_file(opal_kobj, &bin_attr_symbol_map); 594 if (rc) 595 pr_warn("Error %d creating OPAL symbols file\n", rc); 596 } 597 598 static void __init opal_dump_region_init(void) 599 { 600 void *addr; 601 uint64_t size; 602 int rc; 603 604 if (!opal_check_token(OPAL_REGISTER_DUMP_REGION)) 605 return; 606 607 /* Register kernel log buffer */ 608 addr = log_buf_addr_get(); 609 if (addr == NULL) 610 return; 611 612 size = log_buf_len_get(); 613 if (size == 0) 614 return; 615 616 rc = opal_register_dump_region(OPAL_DUMP_REGION_LOG_BUF, 617 __pa(addr), size); 618 /* Don't warn if this is just an older OPAL that doesn't 619 * know about that call 620 */ 621 if (rc && rc != OPAL_UNSUPPORTED) 622 pr_warn("DUMP: Failed to register kernel log buffer. " 623 "rc = %d\n", rc); 624 } 625 626 static void opal_pdev_init(const char *compatible) 627 { 628 struct device_node *np; 629 630 for_each_compatible_node(np, NULL, compatible) 631 of_platform_device_create(np, NULL, NULL); 632 } 633 634 static int kopald(void *unused) 635 { 636 unsigned long timeout = msecs_to_jiffies(opal_heartbeat) + 1; 637 __be64 events; 638 639 set_freezable(); 640 do { 641 try_to_freeze(); 642 opal_poll_events(&events); 643 opal_handle_events(be64_to_cpu(events)); 644 schedule_timeout_interruptible(timeout); 645 } while (!kthread_should_stop()); 646 647 return 0; 648 } 649 650 void opal_wake_poller(void) 651 { 652 if (kopald_tsk) 653 wake_up_process(kopald_tsk); 654 } 655 656 static void opal_init_heartbeat(void) 657 { 658 /* Old firwmware, we assume the HVC heartbeat is sufficient */ 659 if (of_property_read_u32(opal_node, "ibm,heartbeat-ms", 660 &opal_heartbeat) != 0) 661 opal_heartbeat = 0; 662 663 if (opal_heartbeat) 664 kopald_tsk = kthread_run(kopald, NULL, "kopald"); 665 } 666 667 static int __init opal_init(void) 668 { 669 struct device_node *np, *consoles, *leds; 670 int rc; 671 672 opal_node = of_find_node_by_path("/ibm,opal"); 673 if (!opal_node) { 674 pr_warn("Device node not found\n"); 675 return -ENODEV; 676 } 677 678 /* Register OPAL consoles if any ports */ 679 consoles = of_find_node_by_path("/ibm,opal/consoles"); 680 if (consoles) { 681 for_each_child_of_node(consoles, np) { 682 if (strcmp(np->name, "serial")) 683 continue; 684 of_platform_device_create(np, NULL, NULL); 685 } 686 of_node_put(consoles); 687 } 688 689 /* Initialise OPAL messaging system */ 690 opal_message_init(); 691 692 /* Initialise OPAL asynchronous completion interface */ 693 opal_async_comp_init(); 694 695 /* Initialise OPAL sensor interface */ 696 opal_sensor_init(); 697 698 /* Initialise OPAL hypervisor maintainence interrupt handling */ 699 opal_hmi_handler_init(); 700 701 /* Create i2c platform devices */ 702 opal_pdev_init("ibm,opal-i2c"); 703 704 /* Setup a heatbeat thread if requested by OPAL */ 705 opal_init_heartbeat(); 706 707 /* Create leds platform devices */ 708 leds = of_find_node_by_path("/ibm,opal/leds"); 709 if (leds) { 710 of_platform_device_create(leds, "opal_leds", NULL); 711 of_node_put(leds); 712 } 713 714 /* Initialise OPAL message log interface */ 715 opal_msglog_init(); 716 717 /* Create "opal" kobject under /sys/firmware */ 718 rc = opal_sysfs_init(); 719 if (rc == 0) { 720 /* Export symbol map to userspace */ 721 opal_export_symmap(); 722 /* Setup dump region interface */ 723 opal_dump_region_init(); 724 /* Setup error log interface */ 725 rc = opal_elog_init(); 726 /* Setup code update interface */ 727 opal_flash_update_init(); 728 /* Setup platform dump extract interface */ 729 opal_platform_dump_init(); 730 /* Setup system parameters interface */ 731 opal_sys_param_init(); 732 /* Setup message log sysfs interface. */ 733 opal_msglog_sysfs_init(); 734 } 735 736 /* Initialize platform devices: IPMI backend, PRD & flash interface */ 737 opal_pdev_init("ibm,opal-ipmi"); 738 opal_pdev_init("ibm,opal-flash"); 739 opal_pdev_init("ibm,opal-prd"); 740 741 /* Initialise platform device: oppanel interface */ 742 opal_pdev_init("ibm,opal-oppanel"); 743 744 /* Initialise OPAL kmsg dumper for flushing console on panic */ 745 opal_kmsg_init(); 746 747 return 0; 748 } 749 machine_subsys_initcall(powernv, opal_init); 750 751 void opal_shutdown(void) 752 { 753 long rc = OPAL_BUSY; 754 755 opal_event_shutdown(); 756 757 /* 758 * Then sync with OPAL which ensure anything that can 759 * potentially write to our memory has completed such 760 * as an ongoing dump retrieval 761 */ 762 while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { 763 rc = opal_sync_host_reboot(); 764 if (rc == OPAL_BUSY) 765 opal_poll_events(NULL); 766 else 767 mdelay(10); 768 } 769 770 /* Unregister memory dump region */ 771 if (opal_check_token(OPAL_UNREGISTER_DUMP_REGION)) 772 opal_unregister_dump_region(OPAL_DUMP_REGION_LOG_BUF); 773 } 774 775 /* Export this so that test modules can use it */ 776 EXPORT_SYMBOL_GPL(opal_invalid_call); 777 EXPORT_SYMBOL_GPL(opal_xscom_read); 778 EXPORT_SYMBOL_GPL(opal_xscom_write); 779 EXPORT_SYMBOL_GPL(opal_ipmi_send); 780 EXPORT_SYMBOL_GPL(opal_ipmi_recv); 781 EXPORT_SYMBOL_GPL(opal_flash_read); 782 EXPORT_SYMBOL_GPL(opal_flash_write); 783 EXPORT_SYMBOL_GPL(opal_flash_erase); 784 EXPORT_SYMBOL_GPL(opal_prd_msg); 785 786 /* Convert a region of vmalloc memory to an opal sg list */ 787 struct opal_sg_list *opal_vmalloc_to_sg_list(void *vmalloc_addr, 788 unsigned long vmalloc_size) 789 { 790 struct opal_sg_list *sg, *first = NULL; 791 unsigned long i = 0; 792 793 sg = kzalloc(PAGE_SIZE, GFP_KERNEL); 794 if (!sg) 795 goto nomem; 796 797 first = sg; 798 799 while (vmalloc_size > 0) { 800 uint64_t data = vmalloc_to_pfn(vmalloc_addr) << PAGE_SHIFT; 801 uint64_t length = min(vmalloc_size, PAGE_SIZE); 802 803 sg->entry[i].data = cpu_to_be64(data); 804 sg->entry[i].length = cpu_to_be64(length); 805 i++; 806 807 if (i >= SG_ENTRIES_PER_NODE) { 808 struct opal_sg_list *next; 809 810 next = kzalloc(PAGE_SIZE, GFP_KERNEL); 811 if (!next) 812 goto nomem; 813 814 sg->length = cpu_to_be64( 815 i * sizeof(struct opal_sg_entry) + 16); 816 i = 0; 817 sg->next = cpu_to_be64(__pa(next)); 818 sg = next; 819 } 820 821 vmalloc_addr += length; 822 vmalloc_size -= length; 823 } 824 825 sg->length = cpu_to_be64(i * sizeof(struct opal_sg_entry) + 16); 826 827 return first; 828 829 nomem: 830 pr_err("%s : Failed to allocate memory\n", __func__); 831 opal_free_sg_list(first); 832 return NULL; 833 } 834 835 void opal_free_sg_list(struct opal_sg_list *sg) 836 { 837 while (sg) { 838 uint64_t next = be64_to_cpu(sg->next); 839 840 kfree(sg); 841 842 if (next) 843 sg = __va(next); 844 else 845 sg = NULL; 846 } 847 } 848 849 int opal_error_code(int rc) 850 { 851 switch (rc) { 852 case OPAL_SUCCESS: return 0; 853 854 case OPAL_PARAMETER: return -EINVAL; 855 case OPAL_ASYNC_COMPLETION: return -EINPROGRESS; 856 case OPAL_BUSY_EVENT: return -EBUSY; 857 case OPAL_NO_MEM: return -ENOMEM; 858 case OPAL_PERMISSION: return -EPERM; 859 860 case OPAL_UNSUPPORTED: return -EIO; 861 case OPAL_HARDWARE: return -EIO; 862 case OPAL_INTERNAL_ERROR: return -EIO; 863 default: 864 pr_err("%s: unexpected OPAL error %d\n", __func__, rc); 865 return -EIO; 866 } 867 } 868 869 void powernv_set_nmmu_ptcr(unsigned long ptcr) 870 { 871 int rc; 872 873 if (firmware_has_feature(FW_FEATURE_OPAL)) { 874 rc = opal_nmmu_set_ptcr(-1UL, ptcr); 875 if (rc != OPAL_SUCCESS && rc != OPAL_UNSUPPORTED) 876 pr_warn("%s: Unable to set nest mmu ptcr\n", __func__); 877 } 878 } 879 880 EXPORT_SYMBOL_GPL(opal_poll_events); 881 EXPORT_SYMBOL_GPL(opal_rtc_read); 882 EXPORT_SYMBOL_GPL(opal_rtc_write); 883 EXPORT_SYMBOL_GPL(opal_tpo_read); 884 EXPORT_SYMBOL_GPL(opal_tpo_write); 885 EXPORT_SYMBOL_GPL(opal_i2c_request); 886 /* Export these symbols for PowerNV LED class driver */ 887 EXPORT_SYMBOL_GPL(opal_leds_get_ind); 888 EXPORT_SYMBOL_GPL(opal_leds_set_ind); 889 /* Export this symbol for PowerNV Operator Panel class driver */ 890 EXPORT_SYMBOL_GPL(opal_write_oppanel_async); 891 /* Export this for KVM */ 892 EXPORT_SYMBOL_GPL(opal_int_set_mfrr); 893 EXPORT_SYMBOL_GPL(opal_int_eoi); 894