1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * This file implements an irqchip for OPAL events. Whenever there is 4 * an interrupt that is handled by OPAL we get passed a list of events 5 * that Linux needs to do something about. These basically look like 6 * interrupts to Linux so we implement an irqchip to handle them. 7 * 8 * Copyright Alistair Popple, IBM Corporation 2014. 9 */ 10 #include <linux/bitops.h> 11 #include <linux/irq.h> 12 #include <linux/irqchip.h> 13 #include <linux/irqdomain.h> 14 #include <linux/interrupt.h> 15 #include <linux/module.h> 16 #include <linux/of.h> 17 #include <linux/platform_device.h> 18 #include <linux/kthread.h> 19 #include <linux/delay.h> 20 #include <linux/slab.h> 21 #include <linux/of_irq.h> 22 23 #include <asm/machdep.h> 24 #include <asm/opal.h> 25 26 #include "powernv.h" 27 28 /* Maximum number of events supported by OPAL firmware */ 29 #define MAX_NUM_EVENTS 64 30 31 struct opal_event_irqchip { 32 struct irq_chip irqchip; 33 struct irq_domain *domain; 34 unsigned long mask; 35 }; 36 static struct opal_event_irqchip opal_event_irqchip; 37 static u64 last_outstanding_events; 38 static int opal_irq_count; 39 static struct resource *opal_irqs; 40 41 void opal_handle_events(void) 42 { 43 __be64 events = 0; 44 u64 e; 45 46 e = READ_ONCE(last_outstanding_events) & opal_event_irqchip.mask; 47 again: 48 while (e) { 49 int hwirq; 50 51 hwirq = fls64(e) - 1; 52 e &= ~BIT_ULL(hwirq); 53 54 local_irq_disable(); 55 irq_enter(); 56 generic_handle_domain_irq(opal_event_irqchip.domain, hwirq); 57 irq_exit(); 58 local_irq_enable(); 59 60 cond_resched(); 61 } 62 WRITE_ONCE(last_outstanding_events, 0); 63 if (opal_poll_events(&events) != OPAL_SUCCESS) 64 return; 65 e = be64_to_cpu(events) & opal_event_irqchip.mask; 66 if (e) 67 goto again; 68 } 69 70 bool opal_have_pending_events(void) 71 { 72 if (READ_ONCE(last_outstanding_events) & opal_event_irqchip.mask) 73 return true; 74 return false; 75 } 76 77 static void opal_event_mask(struct irq_data *d) 78 { 79 clear_bit(d->hwirq, &opal_event_irqchip.mask); 80 } 81 82 static void opal_event_unmask(struct irq_data *d) 83 { 84 set_bit(d->hwirq, &opal_event_irqchip.mask); 85 if (opal_have_pending_events()) 86 opal_wake_poller(); 87 } 88 89 static int opal_event_set_type(struct irq_data *d, unsigned int flow_type) 90 { 91 /* 92 * For now we only support level triggered events. The irq 93 * handler will be called continuously until the event has 94 * been cleared in OPAL. 95 */ 96 if (flow_type != IRQ_TYPE_LEVEL_HIGH) 97 return -EINVAL; 98 99 return 0; 100 } 101 102 static struct opal_event_irqchip opal_event_irqchip = { 103 .irqchip = { 104 .name = "OPAL EVT", 105 .irq_mask = opal_event_mask, 106 .irq_unmask = opal_event_unmask, 107 .irq_set_type = opal_event_set_type, 108 }, 109 .mask = 0, 110 }; 111 112 static int opal_event_map(struct irq_domain *d, unsigned int irq, 113 irq_hw_number_t hwirq) 114 { 115 irq_set_chip_data(irq, &opal_event_irqchip); 116 irq_set_chip_and_handler(irq, &opal_event_irqchip.irqchip, 117 handle_level_irq); 118 119 return 0; 120 } 121 122 static irqreturn_t opal_interrupt(int irq, void *data) 123 { 124 __be64 events; 125 126 opal_handle_interrupt(virq_to_hw(irq), &events); 127 WRITE_ONCE(last_outstanding_events, be64_to_cpu(events)); 128 if (opal_have_pending_events()) 129 opal_wake_poller(); 130 131 return IRQ_HANDLED; 132 } 133 134 static int opal_event_match(struct irq_domain *h, struct device_node *node, 135 enum irq_domain_bus_token bus_token) 136 { 137 return irq_domain_get_of_node(h) == node; 138 } 139 140 static int opal_event_xlate(struct irq_domain *h, struct device_node *np, 141 const u32 *intspec, unsigned int intsize, 142 irq_hw_number_t *out_hwirq, unsigned int *out_flags) 143 { 144 *out_hwirq = intspec[0]; 145 *out_flags = IRQ_TYPE_LEVEL_HIGH; 146 147 return 0; 148 } 149 150 static const struct irq_domain_ops opal_event_domain_ops = { 151 .match = opal_event_match, 152 .map = opal_event_map, 153 .xlate = opal_event_xlate, 154 }; 155 156 void opal_event_shutdown(void) 157 { 158 unsigned int i; 159 160 /* First free interrupts, which will also mask them */ 161 for (i = 0; i < opal_irq_count; i++) { 162 if (!opal_irqs || !opal_irqs[i].start) 163 continue; 164 165 if (in_interrupt() || irqs_disabled()) 166 disable_irq_nosync(opal_irqs[i].start); 167 else 168 free_irq(opal_irqs[i].start, NULL); 169 170 opal_irqs[i].start = 0; 171 } 172 } 173 174 int __init opal_event_init(void) 175 { 176 struct device_node *dn, *opal_node; 177 bool old_style = false; 178 int i, rc = 0; 179 180 opal_node = of_find_node_by_path("/ibm,opal"); 181 if (!opal_node) { 182 pr_warn("opal: Node not found\n"); 183 return -ENODEV; 184 } 185 186 /* If dn is NULL it means the domain won't be linked to a DT 187 * node so therefore irq_of_parse_and_map(...) wont work. But 188 * that shouldn't be problem because if we're running a 189 * version of skiboot that doesn't have the dn then the 190 * devices won't have the correct properties and will have to 191 * fall back to the legacy method (opal_event_request(...)) 192 * anyway. */ 193 dn = of_find_compatible_node(NULL, NULL, "ibm,opal-event"); 194 opal_event_irqchip.domain = irq_domain_add_linear(dn, MAX_NUM_EVENTS, 195 &opal_event_domain_ops, &opal_event_irqchip); 196 of_node_put(dn); 197 if (!opal_event_irqchip.domain) { 198 pr_warn("opal: Unable to create irq domain\n"); 199 rc = -ENOMEM; 200 goto out; 201 } 202 203 /* Look for new-style (standard) "interrupts" property */ 204 opal_irq_count = of_irq_count(opal_node); 205 206 /* Absent ? Look for the old one */ 207 if (opal_irq_count < 1) { 208 /* Get opal-interrupts property and names if present */ 209 rc = of_property_count_u32_elems(opal_node, "opal-interrupts"); 210 if (rc > 0) 211 opal_irq_count = rc; 212 old_style = true; 213 } 214 215 /* No interrupts ? Bail out */ 216 if (!opal_irq_count) 217 goto out; 218 219 pr_debug("OPAL: Found %d interrupts reserved for OPAL using %s scheme\n", 220 opal_irq_count, old_style ? "old" : "new"); 221 222 /* Allocate an IRQ resources array */ 223 opal_irqs = kcalloc(opal_irq_count, sizeof(struct resource), GFP_KERNEL); 224 if (WARN_ON(!opal_irqs)) { 225 rc = -ENOMEM; 226 goto out; 227 } 228 229 /* Build the resources array */ 230 if (old_style) { 231 /* Old style "opal-interrupts" property */ 232 for (i = 0; i < opal_irq_count; i++) { 233 struct resource *r = &opal_irqs[i]; 234 const char *name = NULL; 235 u32 hw_irq; 236 int virq; 237 238 rc = of_property_read_u32_index(opal_node, "opal-interrupts", 239 i, &hw_irq); 240 if (WARN_ON(rc < 0)) { 241 opal_irq_count = i; 242 break; 243 } 244 of_property_read_string_index(opal_node, "opal-interrupts-names", 245 i, &name); 246 virq = irq_create_mapping(NULL, hw_irq); 247 if (!virq) { 248 pr_warn("Failed to map OPAL irq 0x%x\n", hw_irq); 249 continue; 250 } 251 r->start = r->end = virq; 252 r->flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW; 253 r->name = name; 254 } 255 } else { 256 /* new style standard "interrupts" property */ 257 rc = of_irq_to_resource_table(opal_node, opal_irqs, opal_irq_count); 258 if (WARN_ON(rc < 0)) { 259 opal_irq_count = 0; 260 kfree(opal_irqs); 261 goto out; 262 } 263 if (WARN_ON(rc < opal_irq_count)) 264 opal_irq_count = rc; 265 } 266 267 /* Install interrupt handlers */ 268 for (i = 0; i < opal_irq_count; i++) { 269 struct resource *r = &opal_irqs[i]; 270 const char *name; 271 272 /* Prefix name */ 273 if (r->name && strlen(r->name)) 274 name = kasprintf(GFP_KERNEL, "opal-%s", r->name); 275 else 276 name = kasprintf(GFP_KERNEL, "opal"); 277 278 if (!name) 279 continue; 280 /* Install interrupt handler */ 281 rc = request_irq(r->start, opal_interrupt, r->flags & IRQD_TRIGGER_MASK, 282 name, NULL); 283 if (rc) { 284 pr_warn("Error %d requesting OPAL irq %d\n", rc, (int)r->start); 285 kfree(name); 286 continue; 287 } 288 } 289 rc = 0; 290 out: 291 of_node_put(opal_node); 292 return rc; 293 } 294 machine_arch_initcall(powernv, opal_event_init); 295 296 /** 297 * opal_event_request(unsigned int opal_event_nr) - Request an event 298 * @opal_event_nr: the opal event number to request 299 * 300 * This routine can be used to find the linux virq number which can 301 * then be passed to request_irq to assign a handler for a particular 302 * opal event. This should only be used by legacy devices which don't 303 * have proper device tree bindings. Most devices should use 304 * irq_of_parse_and_map() instead. 305 */ 306 int opal_event_request(unsigned int opal_event_nr) 307 { 308 if (WARN_ON_ONCE(!opal_event_irqchip.domain)) 309 return 0; 310 311 return irq_create_mapping(opal_event_irqchip.domain, opal_event_nr); 312 } 313 EXPORT_SYMBOL(opal_event_request); 314