1 /* 2 * Board setup routines for the IBM 750GX/CL platform w/ TSI10x bridge 3 * 4 * Copyright 2007 IBM Corporation 5 * 6 * Stephen Winiecki <stevewin@us.ibm.com> 7 * Josh Boyer <jwboyer@linux.vnet.ibm.com> 8 * 9 * Based on code from mpc7448_hpc2.c 10 * 11 * This program is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License 13 * version 2 as published by the Free Software Foundation. 14 */ 15 16 #include <linux/stddef.h> 17 #include <linux/kernel.h> 18 #include <linux/pci.h> 19 #include <linux/kdev_t.h> 20 #include <linux/console.h> 21 #include <linux/delay.h> 22 #include <linux/irq.h> 23 #include <linux/seq_file.h> 24 #include <linux/root_dev.h> 25 #include <linux/serial.h> 26 #include <linux/tty.h> 27 #include <linux/serial_core.h> 28 #include <linux/of_platform.h> 29 #include <linux/extable.h> 30 31 #include <asm/time.h> 32 #include <asm/machdep.h> 33 #include <asm/prom.h> 34 #include <asm/udbg.h> 35 #include <asm/tsi108.h> 36 #include <asm/pci-bridge.h> 37 #include <asm/reg.h> 38 #include <mm/mmu_decl.h> 39 #include <asm/tsi108_irq.h> 40 #include <asm/tsi108_pci.h> 41 #include <asm/mpic.h> 42 43 #undef DEBUG 44 45 #define HOLLY_PCI_CFG_PHYS 0x7c000000 46 47 int holly_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn) 48 { 49 if (bus == 0 && PCI_SLOT(devfn) == 0) 50 return PCIBIOS_DEVICE_NOT_FOUND; 51 else 52 return PCIBIOS_SUCCESSFUL; 53 } 54 55 static void holly_remap_bridge(void) 56 { 57 u32 lut_val, lut_addr; 58 int i; 59 60 printk(KERN_INFO "Remapping PCI bridge\n"); 61 62 /* Re-init the PCI bridge and LUT registers to have mappings that don't 63 * rely on PIBS 64 */ 65 lut_addr = 0x900; 66 for (i = 0; i < 31; i++) { 67 tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x00000201); 68 lut_addr += 4; 69 tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x0); 70 lut_addr += 4; 71 } 72 73 /* Reserve the last LUT entry for PCI I/O space */ 74 tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x00000241); 75 lut_addr += 4; 76 tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x0); 77 78 /* Map PCI I/O space */ 79 tsi108_write_reg(TSI108_PCI_PFAB_IO_UPPER, 0x0); 80 tsi108_write_reg(TSI108_PCI_PFAB_IO, 0x1); 81 82 /* Map PCI CFG space */ 83 tsi108_write_reg(TSI108_PCI_PFAB_BAR0_UPPER, 0x0); 84 tsi108_write_reg(TSI108_PCI_PFAB_BAR0, 0x7c000000 | 0x01); 85 86 /* We don't need MEM32 and PRM remapping so disable them */ 87 tsi108_write_reg(TSI108_PCI_PFAB_MEM32, 0x0); 88 tsi108_write_reg(TSI108_PCI_PFAB_PFM3, 0x0); 89 tsi108_write_reg(TSI108_PCI_PFAB_PFM4, 0x0); 90 91 /* Set P2O_BAR0 */ 92 tsi108_write_reg(TSI108_PCI_P2O_BAR0_UPPER, 0x0); 93 tsi108_write_reg(TSI108_PCI_P2O_BAR0, 0xc0000000); 94 95 /* Init the PCI LUTs to do no remapping */ 96 lut_addr = 0x500; 97 lut_val = 0x00000002; 98 99 for (i = 0; i < 32; i++) { 100 tsi108_write_reg(TSI108_PCI_OFFSET + lut_addr, lut_val); 101 lut_addr += 4; 102 tsi108_write_reg(TSI108_PCI_OFFSET + lut_addr, 0x40000000); 103 lut_addr += 4; 104 lut_val += 0x02000000; 105 } 106 tsi108_write_reg(TSI108_PCI_P2O_PAGE_SIZES, 0x00007900); 107 108 /* Set 64-bit PCI bus address for system memory */ 109 tsi108_write_reg(TSI108_PCI_P2O_BAR2_UPPER, 0x0); 110 tsi108_write_reg(TSI108_PCI_P2O_BAR2, 0x0); 111 } 112 113 static void __init holly_setup_arch(void) 114 { 115 struct device_node *np; 116 117 if (ppc_md.progress) 118 ppc_md.progress("holly_setup_arch():set_bridge", 0); 119 120 tsi108_csr_vir_base = get_vir_csrbase(); 121 122 /* setup PCI host bridge */ 123 holly_remap_bridge(); 124 125 np = of_find_node_by_type(NULL, "pci"); 126 if (np) 127 tsi108_setup_pci(np, HOLLY_PCI_CFG_PHYS, 1); 128 129 ppc_md.pci_exclude_device = holly_exclude_device; 130 if (ppc_md.progress) 131 ppc_md.progress("tsi108: resources set", 0x100); 132 133 printk(KERN_INFO "PPC750GX/CL Platform\n"); 134 } 135 136 /* 137 * Interrupt setup and service. Interrupts on the holly come 138 * from the four external INT pins, PCI interrupts are routed via 139 * PCI interrupt control registers, it generates internal IRQ23 140 * 141 * Interrupt routing on the Holly Board: 142 * TSI108:PB_INT[0] -> CPU0:INT# 143 * TSI108:PB_INT[1] -> CPU0:MCP# 144 * TSI108:PB_INT[2] -> N/C 145 * TSI108:PB_INT[3] -> N/C 146 */ 147 static void __init holly_init_IRQ(void) 148 { 149 struct mpic *mpic; 150 #ifdef CONFIG_PCI 151 unsigned int cascade_pci_irq; 152 struct device_node *tsi_pci; 153 struct device_node *cascade_node = NULL; 154 #endif 155 156 mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | 157 MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108, 158 24, 0, 159 "Tsi108_PIC"); 160 161 BUG_ON(mpic == NULL); 162 163 mpic_assign_isu(mpic, 0, mpic->paddr + 0x100); 164 165 mpic_init(mpic); 166 167 #ifdef CONFIG_PCI 168 tsi_pci = of_find_node_by_type(NULL, "pci"); 169 if (tsi_pci == NULL) { 170 printk(KERN_ERR "%s: No tsi108 pci node found !\n", __func__); 171 return; 172 } 173 174 cascade_node = of_find_node_by_type(NULL, "pic-router"); 175 if (cascade_node == NULL) { 176 printk(KERN_ERR "%s: No tsi108 pci cascade node found !\n", __func__); 177 return; 178 } 179 180 cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0); 181 pr_debug("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__, (u32) cascade_pci_irq); 182 tsi108_pci_int_init(cascade_node); 183 irq_set_handler_data(cascade_pci_irq, mpic); 184 irq_set_chained_handler(cascade_pci_irq, tsi108_irq_cascade); 185 #endif 186 /* Configure MPIC outputs to CPU0 */ 187 tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); 188 } 189 190 void holly_show_cpuinfo(struct seq_file *m) 191 { 192 seq_printf(m, "vendor\t\t: IBM\n"); 193 seq_printf(m, "machine\t\t: PPC750 GX/CL\n"); 194 } 195 196 void __noreturn holly_restart(char *cmd) 197 { 198 __be32 __iomem *ocn_bar1 = NULL; 199 unsigned long bar; 200 struct device_node *bridge = NULL; 201 const void *prop; 202 int size; 203 phys_addr_t addr = 0xc0000000; 204 205 local_irq_disable(); 206 207 bridge = of_find_node_by_type(NULL, "tsi-bridge"); 208 if (bridge) { 209 prop = of_get_property(bridge, "reg", &size); 210 addr = of_translate_address(bridge, prop); 211 } 212 addr += (TSI108_PB_OFFSET + 0x414); 213 214 ocn_bar1 = ioremap(addr, 0x4); 215 216 /* Turn on the BOOT bit so the addresses are correctly 217 * routed to the HLP interface */ 218 bar = ioread32be(ocn_bar1); 219 bar |= 2; 220 iowrite32be(bar, ocn_bar1); 221 iosync(); 222 223 /* Set SRR0 to the reset vector and turn on MSR_IP */ 224 mtspr(SPRN_SRR0, 0xfff00100); 225 mtspr(SPRN_SRR1, MSR_IP); 226 227 /* Do an rfi to jump back to firmware. Somewhat evil, 228 * but it works 229 */ 230 __asm__ __volatile__("rfi" : : : "memory"); 231 232 /* Spin until reset happens. Shouldn't really get here */ 233 for (;;) ; 234 } 235 236 void holly_power_off(void) 237 { 238 local_irq_disable(); 239 /* No way to shut power off with software */ 240 for (;;) ; 241 } 242 243 void holly_halt(void) 244 { 245 holly_power_off(); 246 } 247 248 /* 249 * Called very early, device-tree isn't unflattened 250 */ 251 static int __init holly_probe(void) 252 { 253 if (!of_machine_is_compatible("ibm,holly")) 254 return 0; 255 return 1; 256 } 257 258 static int ppc750_machine_check_exception(struct pt_regs *regs) 259 { 260 const struct exception_table_entry *entry; 261 262 /* Are we prepared to handle this fault */ 263 if ((entry = search_exception_tables(regs->nip)) != NULL) { 264 tsi108_clear_pci_cfg_error(); 265 regs->msr |= MSR_RI; 266 regs->nip = extable_fixup(entry); 267 return 1; 268 } 269 return 0; 270 } 271 272 define_machine(holly){ 273 .name = "PPC750 GX/CL TSI", 274 .probe = holly_probe, 275 .setup_arch = holly_setup_arch, 276 .init_IRQ = holly_init_IRQ, 277 .show_cpuinfo = holly_show_cpuinfo, 278 .get_irq = mpic_get_irq, 279 .restart = holly_restart, 280 .calibrate_decr = generic_calibrate_decr, 281 .machine_check_exception = ppc750_machine_check_exception, 282 .progress = udbg_progress, 283 }; 284