1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Board setup routines for the IBM 750GX/CL platform w/ TSI10x bridge
4  *
5  * Copyright 2007 IBM Corporation
6  *
7  * Stephen Winiecki <stevewin@us.ibm.com>
8  * Josh Boyer <jwboyer@linux.vnet.ibm.com>
9  *
10  * Based on code from mpc7448_hpc2.c
11  */
12 
13 #include <linux/stddef.h>
14 #include <linux/kernel.h>
15 #include <linux/pci.h>
16 #include <linux/kdev_t.h>
17 #include <linux/console.h>
18 #include <linux/delay.h>
19 #include <linux/irq.h>
20 #include <linux/seq_file.h>
21 #include <linux/root_dev.h>
22 #include <linux/serial.h>
23 #include <linux/tty.h>
24 #include <linux/serial_core.h>
25 #include <linux/of_platform.h>
26 #include <linux/extable.h>
27 
28 #include <asm/time.h>
29 #include <asm/machdep.h>
30 #include <asm/prom.h>
31 #include <asm/udbg.h>
32 #include <asm/tsi108.h>
33 #include <asm/pci-bridge.h>
34 #include <asm/reg.h>
35 #include <mm/mmu_decl.h>
36 #include <asm/tsi108_irq.h>
37 #include <asm/tsi108_pci.h>
38 #include <asm/mpic.h>
39 
40 #undef DEBUG
41 
42 #define HOLLY_PCI_CFG_PHYS 0x7c000000
43 
44 static int holly_exclude_device(struct pci_controller *hose, u_char bus,
45 				u_char devfn)
46 {
47 	if (bus == 0 && PCI_SLOT(devfn) == 0)
48 		return PCIBIOS_DEVICE_NOT_FOUND;
49 	else
50 		return PCIBIOS_SUCCESSFUL;
51 }
52 
53 static void holly_remap_bridge(void)
54 {
55 	u32 lut_val, lut_addr;
56 	int i;
57 
58 	printk(KERN_INFO "Remapping PCI bridge\n");
59 
60 	/* Re-init the PCI bridge and LUT registers to have mappings that don't
61 	 * rely on PIBS
62 	 */
63 	lut_addr = 0x900;
64 	for (i = 0; i < 31; i++) {
65 		tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x00000201);
66 		lut_addr += 4;
67 		tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x0);
68 		lut_addr += 4;
69 	}
70 
71 	/* Reserve the last LUT entry for PCI I/O space */
72 	tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x00000241);
73 	lut_addr += 4;
74 	tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x0);
75 
76 	/* Map PCI I/O space */
77 	tsi108_write_reg(TSI108_PCI_PFAB_IO_UPPER, 0x0);
78 	tsi108_write_reg(TSI108_PCI_PFAB_IO, 0x1);
79 
80 	/* Map PCI CFG space */
81 	tsi108_write_reg(TSI108_PCI_PFAB_BAR0_UPPER, 0x0);
82 	tsi108_write_reg(TSI108_PCI_PFAB_BAR0, 0x7c000000 | 0x01);
83 
84 	/* We don't need MEM32 and PRM remapping so disable them */
85 	tsi108_write_reg(TSI108_PCI_PFAB_MEM32, 0x0);
86 	tsi108_write_reg(TSI108_PCI_PFAB_PFM3, 0x0);
87 	tsi108_write_reg(TSI108_PCI_PFAB_PFM4, 0x0);
88 
89 	/* Set P2O_BAR0 */
90 	tsi108_write_reg(TSI108_PCI_P2O_BAR0_UPPER, 0x0);
91 	tsi108_write_reg(TSI108_PCI_P2O_BAR0, 0xc0000000);
92 
93 	/* Init the PCI LUTs to do no remapping */
94 	lut_addr = 0x500;
95 	lut_val = 0x00000002;
96 
97 	for (i = 0; i < 32; i++) {
98 		tsi108_write_reg(TSI108_PCI_OFFSET + lut_addr, lut_val);
99 		lut_addr += 4;
100 		tsi108_write_reg(TSI108_PCI_OFFSET + lut_addr, 0x40000000);
101 		lut_addr += 4;
102 		lut_val += 0x02000000;
103 	}
104 	tsi108_write_reg(TSI108_PCI_P2O_PAGE_SIZES, 0x00007900);
105 
106 	/* Set 64-bit PCI bus address for system memory */
107 	tsi108_write_reg(TSI108_PCI_P2O_BAR2_UPPER, 0x0);
108 	tsi108_write_reg(TSI108_PCI_P2O_BAR2, 0x0);
109 }
110 
111 static void __init holly_init_pci(void)
112 {
113 	struct device_node *np;
114 
115 	if (ppc_md.progress)
116 		ppc_md.progress("holly_setup_arch():set_bridge", 0);
117 
118 	/* setup PCI host bridge */
119 	holly_remap_bridge();
120 
121 	np = of_find_node_by_type(NULL, "pci");
122 	if (np)
123 		tsi108_setup_pci(np, HOLLY_PCI_CFG_PHYS, 1);
124 
125 	ppc_md.pci_exclude_device = holly_exclude_device;
126 	if (ppc_md.progress)
127 		ppc_md.progress("tsi108: resources set", 0x100);
128 }
129 
130 static void __init holly_setup_arch(void)
131 {
132 	tsi108_csr_vir_base = get_vir_csrbase();
133 
134 	printk(KERN_INFO "PPC750GX/CL Platform\n");
135 }
136 
137 /*
138  * Interrupt setup and service.  Interrupts on the holly come
139  * from the four external INT pins, PCI interrupts are routed via
140  * PCI interrupt control registers, it generates internal IRQ23
141  *
142  * Interrupt routing on the Holly Board:
143  * TSI108:PB_INT[0] -> CPU0:INT#
144  * TSI108:PB_INT[1] -> CPU0:MCP#
145  * TSI108:PB_INT[2] -> N/C
146  * TSI108:PB_INT[3] -> N/C
147  */
148 static void __init holly_init_IRQ(void)
149 {
150 	struct mpic *mpic;
151 #ifdef CONFIG_PCI
152 	unsigned int cascade_pci_irq;
153 	struct device_node *tsi_pci;
154 	struct device_node *cascade_node = NULL;
155 #endif
156 
157 	mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
158 			MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
159 			24, 0,
160 			"Tsi108_PIC");
161 
162 	BUG_ON(mpic == NULL);
163 
164 	mpic_assign_isu(mpic, 0, mpic->paddr + 0x100);
165 
166 	mpic_init(mpic);
167 
168 #ifdef CONFIG_PCI
169 	tsi_pci = of_find_node_by_type(NULL, "pci");
170 	if (tsi_pci == NULL) {
171 		printk(KERN_ERR "%s: No tsi108 pci node found !\n", __func__);
172 		return;
173 	}
174 
175 	cascade_node = of_find_node_by_type(NULL, "pic-router");
176 	if (cascade_node == NULL) {
177 		printk(KERN_ERR "%s: No tsi108 pci cascade node found !\n", __func__);
178 		return;
179 	}
180 
181 	cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
182 	pr_debug("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__, (u32) cascade_pci_irq);
183 	tsi108_pci_int_init(cascade_node);
184 	irq_set_handler_data(cascade_pci_irq, mpic);
185 	irq_set_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
186 #endif
187 	/* Configure MPIC outputs to CPU0 */
188 	tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
189 }
190 
191 static void holly_show_cpuinfo(struct seq_file *m)
192 {
193 	seq_printf(m, "vendor\t\t: IBM\n");
194 	seq_printf(m, "machine\t\t: PPC750 GX/CL\n");
195 }
196 
197 static void __noreturn holly_restart(char *cmd)
198 {
199 	__be32 __iomem *ocn_bar1 = NULL;
200 	unsigned long bar;
201 	struct device_node *bridge = NULL;
202 	const void *prop;
203 	int size;
204 	phys_addr_t addr = 0xc0000000;
205 
206 	local_irq_disable();
207 
208 	bridge = of_find_node_by_type(NULL, "tsi-bridge");
209 	if (bridge) {
210 		prop = of_get_property(bridge, "reg", &size);
211 		addr = of_translate_address(bridge, prop);
212 	}
213 	addr += (TSI108_PB_OFFSET + 0x414);
214 
215 	ocn_bar1 = ioremap(addr, 0x4);
216 
217 	/* Turn on the BOOT bit so the addresses are correctly
218 	 * routed to the HLP interface */
219 	bar = ioread32be(ocn_bar1);
220 	bar |= 2;
221 	iowrite32be(bar, ocn_bar1);
222 	iosync();
223 
224 	/* Set SRR0 to the reset vector and turn on MSR_IP */
225 	mtspr(SPRN_SRR0, 0xfff00100);
226 	mtspr(SPRN_SRR1, MSR_IP);
227 
228 	/* Do an rfi to jump back to firmware.  Somewhat evil,
229 	 * but it works
230 	 */
231 	__asm__ __volatile__("rfi" : : : "memory");
232 
233 	/* Spin until reset happens.  Shouldn't really get here */
234 	for (;;) ;
235 }
236 
237 /*
238  * Called very early, device-tree isn't unflattened
239  */
240 static int __init holly_probe(void)
241 {
242 	if (!of_machine_is_compatible("ibm,holly"))
243 		return 0;
244 	return 1;
245 }
246 
247 static int ppc750_machine_check_exception(struct pt_regs *regs)
248 {
249 	const struct exception_table_entry *entry;
250 
251 	/* Are we prepared to handle this fault */
252 	if ((entry = search_exception_tables(regs->nip)) != NULL) {
253 		tsi108_clear_pci_cfg_error();
254 		regs_set_recoverable(regs);
255 		regs_set_return_ip(regs, extable_fixup(entry));
256 		return 1;
257 	}
258 	return 0;
259 }
260 
261 define_machine(holly){
262 	.name                   	= "PPC750 GX/CL TSI",
263 	.probe                  	= holly_probe,
264 	.setup_arch             	= holly_setup_arch,
265 	.discover_phbs			= holly_init_pci,
266 	.init_IRQ               	= holly_init_IRQ,
267 	.show_cpuinfo           	= holly_show_cpuinfo,
268 	.get_irq                	= mpic_get_irq,
269 	.restart                	= holly_restart,
270 	.calibrate_decr         	= generic_calibrate_decr,
271 	.machine_check_exception	= ppc750_machine_check_exception,
272 	.progress               	= udbg_progress,
273 };
274