1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (C) 1995 Linus Torvalds 4 * Adapted from 'alpha' version by Gary Thomas 5 * Modified by Cort Dougan (cort@cs.nmt.edu) 6 */ 7 8 /* 9 * bootup setup stuff.. 10 */ 11 12 #include <linux/errno.h> 13 #include <linux/sched.h> 14 #include <linux/kernel.h> 15 #include <linux/mm.h> 16 #include <linux/stddef.h> 17 #include <linux/unistd.h> 18 #include <linux/ptrace.h> 19 #include <linux/user.h> 20 #include <linux/tty.h> 21 #include <linux/major.h> 22 #include <linux/interrupt.h> 23 #include <linux/reboot.h> 24 #include <linux/init.h> 25 #include <linux/pci.h> 26 #include <generated/utsrelease.h> 27 #include <linux/adb.h> 28 #include <linux/module.h> 29 #include <linux/delay.h> 30 #include <linux/console.h> 31 #include <linux/seq_file.h> 32 #include <linux/root_dev.h> 33 #include <linux/initrd.h> 34 #include <linux/timer.h> 35 36 #include <asm/io.h> 37 #include <asm/pgtable.h> 38 #include <asm/prom.h> 39 #include <asm/pci-bridge.h> 40 #include <asm/dma.h> 41 #include <asm/machdep.h> 42 #include <asm/irq.h> 43 #include <asm/hydra.h> 44 #include <asm/sections.h> 45 #include <asm/time.h> 46 #include <asm/i8259.h> 47 #include <asm/mpic.h> 48 #include <asm/rtas.h> 49 #include <asm/xmon.h> 50 51 #include "chrp.h" 52 #include "gg2.h" 53 54 void rtas_indicator_progress(char *, unsigned short); 55 56 int _chrp_type; 57 EXPORT_SYMBOL(_chrp_type); 58 59 static struct mpic *chrp_mpic; 60 61 /* Used for doing CHRP event-scans */ 62 DEFINE_PER_CPU(struct timer_list, heartbeat_timer); 63 unsigned long event_scan_interval; 64 65 extern unsigned long loops_per_jiffy; 66 67 /* To be replaced by RTAS when available */ 68 static unsigned int __iomem *briq_SPOR; 69 70 #ifdef CONFIG_SMP 71 extern struct smp_ops_t chrp_smp_ops; 72 #endif 73 74 static const char *gg2_memtypes[4] = { 75 "FPM", "SDRAM", "EDO", "BEDO" 76 }; 77 static const char *gg2_cachesizes[4] = { 78 "256 KB", "512 KB", "1 MB", "Reserved" 79 }; 80 static const char *gg2_cachetypes[4] = { 81 "Asynchronous", "Reserved", "Flow-Through Synchronous", 82 "Pipelined Synchronous" 83 }; 84 static const char *gg2_cachemodes[4] = { 85 "Disabled", "Write-Through", "Copy-Back", "Transparent Mode" 86 }; 87 88 static const char *chrp_names[] = { 89 "Unknown", 90 "","","", 91 "Motorola", 92 "IBM or Longtrail", 93 "Genesi Pegasos", 94 "Total Impact Briq" 95 }; 96 97 static void chrp_show_cpuinfo(struct seq_file *m) 98 { 99 int i, sdramen; 100 unsigned int t; 101 struct device_node *root; 102 const char *model = ""; 103 104 root = of_find_node_by_path("/"); 105 if (root) 106 model = of_get_property(root, "model", NULL); 107 seq_printf(m, "machine\t\t: CHRP %s\n", model); 108 109 /* longtrail (goldengate) stuff */ 110 if (model && !strncmp(model, "IBM,LongTrail", 13)) { 111 /* VLSI VAS96011/12 `Golden Gate 2' */ 112 /* Memory banks */ 113 sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL) 114 >>31) & 1; 115 for (i = 0; i < (sdramen ? 4 : 6); i++) { 116 t = in_le32(gg2_pci_config_base+ 117 GG2_PCI_DRAM_BANK0+ 118 i*4); 119 if (!(t & 1)) 120 continue; 121 switch ((t>>8) & 0x1f) { 122 case 0x1f: 123 model = "4 MB"; 124 break; 125 case 0x1e: 126 model = "8 MB"; 127 break; 128 case 0x1c: 129 model = "16 MB"; 130 break; 131 case 0x18: 132 model = "32 MB"; 133 break; 134 case 0x10: 135 model = "64 MB"; 136 break; 137 case 0x00: 138 model = "128 MB"; 139 break; 140 default: 141 model = "Reserved"; 142 break; 143 } 144 seq_printf(m, "memory bank %d\t: %s %s\n", i, model, 145 gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]); 146 } 147 /* L2 cache */ 148 t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL); 149 seq_printf(m, "board l2\t: %s %s (%s)\n", 150 gg2_cachesizes[(t>>7) & 3], 151 gg2_cachetypes[(t>>2) & 3], 152 gg2_cachemodes[t & 3]); 153 } 154 of_node_put(root); 155 } 156 157 /* 158 * Fixes for the National Semiconductor PC78308VUL SuperI/O 159 * 160 * Some versions of Open Firmware incorrectly initialize the IRQ settings 161 * for keyboard and mouse 162 */ 163 static inline void __init sio_write(u8 val, u8 index) 164 { 165 outb(index, 0x15c); 166 outb(val, 0x15d); 167 } 168 169 static inline u8 __init sio_read(u8 index) 170 { 171 outb(index, 0x15c); 172 return inb(0x15d); 173 } 174 175 static void __init sio_fixup_irq(const char *name, u8 device, u8 level, 176 u8 type) 177 { 178 u8 level0, type0, active; 179 180 /* select logical device */ 181 sio_write(device, 0x07); 182 active = sio_read(0x30); 183 level0 = sio_read(0x70); 184 type0 = sio_read(0x71); 185 if (level0 != level || type0 != type || !active) { 186 printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: " 187 "remapping to level %d, type %d, active\n", 188 name, level0, type0, !active ? "in" : "", level, type); 189 sio_write(0x01, 0x30); 190 sio_write(level, 0x70); 191 sio_write(type, 0x71); 192 } 193 } 194 195 static void __init sio_init(void) 196 { 197 struct device_node *root; 198 const char *model; 199 200 root = of_find_node_by_path("/"); 201 if (!root) 202 return; 203 204 model = of_get_property(root, "model", NULL); 205 if (model && !strncmp(model, "IBM,LongTrail", 13)) { 206 /* logical device 0 (KBC/Keyboard) */ 207 sio_fixup_irq("keyboard", 0, 1, 2); 208 /* select logical device 1 (KBC/Mouse) */ 209 sio_fixup_irq("mouse", 1, 12, 2); 210 } 211 212 of_node_put(root); 213 } 214 215 216 static void __init pegasos_set_l2cr(void) 217 { 218 struct device_node *np; 219 220 /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */ 221 if (_chrp_type != _CHRP_Pegasos) 222 return; 223 224 /* Enable L2 cache if needed */ 225 np = of_find_node_by_type(NULL, "cpu"); 226 if (np != NULL) { 227 const unsigned int *l2cr = of_get_property(np, "l2cr", NULL); 228 if (l2cr == NULL) { 229 printk ("Pegasos l2cr : no cpu l2cr property found\n"); 230 goto out; 231 } 232 if (!((*l2cr) & 0x80000000)) { 233 printk ("Pegasos l2cr : L2 cache was not active, " 234 "activating\n"); 235 _set_L2CR(0); 236 _set_L2CR((*l2cr) | 0x80000000); 237 } 238 } 239 out: 240 of_node_put(np); 241 } 242 243 static void __noreturn briq_restart(char *cmd) 244 { 245 local_irq_disable(); 246 if (briq_SPOR) 247 out_be32(briq_SPOR, 0); 248 for(;;); 249 } 250 251 /* 252 * Per default, input/output-device points to the keyboard/screen 253 * If no card is installed, the built-in serial port is used as a fallback. 254 * But unfortunately, the firmware does not connect /chosen/{stdin,stdout} 255 * the the built-in serial node. Instead, a /failsafe node is created. 256 */ 257 static __init void chrp_init(void) 258 { 259 struct device_node *node; 260 const char *property; 261 262 if (strstr(boot_command_line, "console=")) 263 return; 264 /* find the boot console from /chosen/stdout */ 265 if (!of_chosen) 266 return; 267 node = of_find_node_by_path("/"); 268 if (!node) 269 return; 270 property = of_get_property(node, "model", NULL); 271 if (!property) 272 goto out_put; 273 if (strcmp(property, "Pegasos2")) 274 goto out_put; 275 /* this is a Pegasos2 */ 276 property = of_get_property(of_chosen, "linux,stdout-path", NULL); 277 if (!property) 278 goto out_put; 279 of_node_put(node); 280 node = of_find_node_by_path(property); 281 if (!node) 282 return; 283 if (!of_node_is_type(node, "serial")) 284 goto out_put; 285 /* 286 * The 9pin connector is either /failsafe 287 * or /pci@80000000/isa@C/serial@i2F8 288 * The optional graphics card has also type 'serial' in VGA mode. 289 */ 290 if (of_node_name_eq(node, "failsafe") || of_node_name_eq(node, "serial")) 291 add_preferred_console("ttyS", 0, NULL); 292 out_put: 293 of_node_put(node); 294 } 295 296 static void __init chrp_setup_arch(void) 297 { 298 struct device_node *root = of_find_node_by_path("/"); 299 const char *machine = NULL; 300 301 /* init to some ~sane value until calibrate_delay() runs */ 302 loops_per_jiffy = 50000000/HZ; 303 304 if (root) 305 machine = of_get_property(root, "model", NULL); 306 if (machine && strncmp(machine, "Pegasos", 7) == 0) { 307 _chrp_type = _CHRP_Pegasos; 308 } else if (machine && strncmp(machine, "IBM", 3) == 0) { 309 _chrp_type = _CHRP_IBM; 310 } else if (machine && strncmp(machine, "MOT", 3) == 0) { 311 _chrp_type = _CHRP_Motorola; 312 } else if (machine && strncmp(machine, "TotalImpact,BRIQ-1", 18) == 0) { 313 _chrp_type = _CHRP_briq; 314 /* Map the SPOR register on briq and change the restart hook */ 315 briq_SPOR = ioremap(0xff0000e8, 4); 316 ppc_md.restart = briq_restart; 317 } else { 318 /* Let's assume it is an IBM chrp if all else fails */ 319 _chrp_type = _CHRP_IBM; 320 } 321 of_node_put(root); 322 printk("chrp type = %x [%s]\n", _chrp_type, chrp_names[_chrp_type]); 323 324 rtas_initialize(); 325 if (rtas_token("display-character") >= 0) 326 ppc_md.progress = rtas_progress; 327 328 /* use RTAS time-of-day routines if available */ 329 if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) { 330 ppc_md.get_boot_time = rtas_get_boot_time; 331 ppc_md.get_rtc_time = rtas_get_rtc_time; 332 ppc_md.set_rtc_time = rtas_set_rtc_time; 333 } 334 335 /* On pegasos, enable the L2 cache if not already done by OF */ 336 pegasos_set_l2cr(); 337 338 /* Lookup PCI host bridges */ 339 chrp_find_bridges(); 340 341 /* 342 * Temporary fixes for PCI devices. 343 * -- Geert 344 */ 345 hydra_init(); /* Mac I/O */ 346 347 /* 348 * Fix the Super I/O configuration 349 */ 350 sio_init(); 351 352 pci_create_OF_bus_map(); 353 354 /* 355 * Print the banner, then scroll down so boot progress 356 * can be printed. -- Cort 357 */ 358 if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0); 359 } 360 361 static void chrp_8259_cascade(struct irq_desc *desc) 362 { 363 struct irq_chip *chip = irq_desc_get_chip(desc); 364 unsigned int cascade_irq = i8259_irq(); 365 366 if (cascade_irq) 367 generic_handle_irq(cascade_irq); 368 369 chip->irq_eoi(&desc->irq_data); 370 } 371 372 /* 373 * Finds the open-pic node and sets up the mpic driver. 374 */ 375 static void __init chrp_find_openpic(void) 376 { 377 struct device_node *np, *root; 378 int len, i, j; 379 int isu_size; 380 const unsigned int *iranges, *opprop = NULL; 381 int oplen = 0; 382 unsigned long opaddr; 383 int na = 1; 384 385 np = of_find_node_by_type(NULL, "open-pic"); 386 if (np == NULL) 387 return; 388 root = of_find_node_by_path("/"); 389 if (root) { 390 opprop = of_get_property(root, "platform-open-pic", &oplen); 391 na = of_n_addr_cells(root); 392 } 393 if (opprop && oplen >= na * sizeof(unsigned int)) { 394 opaddr = opprop[na-1]; /* assume 32-bit */ 395 oplen /= na * sizeof(unsigned int); 396 } else { 397 struct resource r; 398 if (of_address_to_resource(np, 0, &r)) { 399 goto bail; 400 } 401 opaddr = r.start; 402 oplen = 0; 403 } 404 405 printk(KERN_INFO "OpenPIC at %lx\n", opaddr); 406 407 iranges = of_get_property(np, "interrupt-ranges", &len); 408 if (iranges == NULL) 409 len = 0; /* non-distributed mpic */ 410 else 411 len /= 2 * sizeof(unsigned int); 412 413 /* 414 * The first pair of cells in interrupt-ranges refers to the 415 * IDU; subsequent pairs refer to the ISUs. 416 */ 417 if (oplen < len) { 418 printk(KERN_ERR "Insufficient addresses for distributed" 419 " OpenPIC (%d < %d)\n", oplen, len); 420 len = oplen; 421 } 422 423 isu_size = 0; 424 if (len > 0 && iranges[1] != 0) { 425 printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n", 426 iranges[0], iranges[0] + iranges[1] - 1); 427 } 428 if (len > 1) 429 isu_size = iranges[3]; 430 431 chrp_mpic = mpic_alloc(np, opaddr, MPIC_NO_RESET, 432 isu_size, 0, " MPIC "); 433 if (chrp_mpic == NULL) { 434 printk(KERN_ERR "Failed to allocate MPIC structure\n"); 435 goto bail; 436 } 437 j = na - 1; 438 for (i = 1; i < len; ++i) { 439 iranges += 2; 440 j += na; 441 printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x\n", 442 iranges[0], iranges[0] + iranges[1] - 1, 443 opprop[j]); 444 mpic_assign_isu(chrp_mpic, i - 1, opprop[j]); 445 } 446 447 mpic_init(chrp_mpic); 448 ppc_md.get_irq = mpic_get_irq; 449 bail: 450 of_node_put(root); 451 of_node_put(np); 452 } 453 454 #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON) 455 static struct irqaction xmon_irqaction = { 456 .handler = xmon_irq, 457 .name = "XMON break", 458 }; 459 #endif 460 461 static void __init chrp_find_8259(void) 462 { 463 struct device_node *np, *pic = NULL; 464 unsigned long chrp_int_ack = 0; 465 unsigned int cascade_irq; 466 467 /* Look for cascade */ 468 for_each_node_by_type(np, "interrupt-controller") 469 if (of_device_is_compatible(np, "chrp,iic")) { 470 pic = np; 471 break; 472 } 473 /* Ok, 8259 wasn't found. We need to handle the case where 474 * we have a pegasos that claims to be chrp but doesn't have 475 * a proper interrupt tree 476 */ 477 if (pic == NULL && chrp_mpic != NULL) { 478 printk(KERN_ERR "i8259: Not found in device-tree" 479 " assuming no legacy interrupts\n"); 480 return; 481 } 482 483 /* Look for intack. In a perfect world, we would look for it on 484 * the ISA bus that holds the 8259 but heh... Works that way. If 485 * we ever see a problem, we can try to re-use the pSeries code here. 486 * Also, Pegasos-type platforms don't have a proper node to start 487 * from anyway 488 */ 489 for_each_node_by_name(np, "pci") { 490 const unsigned int *addrp = of_get_property(np, 491 "8259-interrupt-acknowledge", NULL); 492 493 if (addrp == NULL) 494 continue; 495 chrp_int_ack = addrp[of_n_addr_cells(np)-1]; 496 break; 497 } 498 of_node_put(np); 499 if (np == NULL) 500 printk(KERN_WARNING "Cannot find PCI interrupt acknowledge" 501 " address, polling\n"); 502 503 i8259_init(pic, chrp_int_ack); 504 if (ppc_md.get_irq == NULL) { 505 ppc_md.get_irq = i8259_irq; 506 irq_set_default_host(i8259_get_host()); 507 } 508 if (chrp_mpic != NULL) { 509 cascade_irq = irq_of_parse_and_map(pic, 0); 510 if (!cascade_irq) 511 printk(KERN_ERR "i8259: failed to map cascade irq\n"); 512 else 513 irq_set_chained_handler(cascade_irq, 514 chrp_8259_cascade); 515 } 516 } 517 518 static void __init chrp_init_IRQ(void) 519 { 520 #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON) 521 struct device_node *kbd; 522 #endif 523 chrp_find_openpic(); 524 chrp_find_8259(); 525 526 #ifdef CONFIG_SMP 527 /* Pegasos has no MPIC, those ops would make it crash. It might be an 528 * option to move setting them to after we probe the PIC though 529 */ 530 if (chrp_mpic != NULL) 531 smp_ops = &chrp_smp_ops; 532 #endif /* CONFIG_SMP */ 533 534 if (_chrp_type == _CHRP_Pegasos) 535 ppc_md.get_irq = i8259_irq; 536 537 #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON) 538 /* see if there is a keyboard in the device tree 539 with a parent of type "adb" */ 540 for_each_node_by_name(kbd, "keyboard") 541 if (kbd->parent && kbd->parent->type 542 && strcmp(kbd->parent->type, "adb") == 0) 543 break; 544 of_node_put(kbd); 545 if (kbd) 546 setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction); 547 #endif 548 } 549 550 static void __init 551 chrp_init2(void) 552 { 553 #ifdef CONFIG_NVRAM 554 chrp_nvram_init(); 555 #endif 556 557 request_region(0x20,0x20,"pic1"); 558 request_region(0xa0,0x20,"pic2"); 559 request_region(0x00,0x20,"dma1"); 560 request_region(0x40,0x20,"timer"); 561 request_region(0x80,0x10,"dma page reg"); 562 request_region(0xc0,0x20,"dma2"); 563 564 if (ppc_md.progress) 565 ppc_md.progress(" Have fun! ", 0x7777); 566 } 567 568 static int __init chrp_probe(void) 569 { 570 const char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(), 571 "device_type", NULL); 572 if (dtype == NULL) 573 return 0; 574 if (strcmp(dtype, "chrp")) 575 return 0; 576 577 ISA_DMA_THRESHOLD = ~0L; 578 DMA_MODE_READ = 0x44; 579 DMA_MODE_WRITE = 0x48; 580 581 pm_power_off = rtas_power_off; 582 583 chrp_init(); 584 585 return 1; 586 } 587 588 define_machine(chrp) { 589 .name = "CHRP", 590 .probe = chrp_probe, 591 .setup_arch = chrp_setup_arch, 592 .init = chrp_init2, 593 .show_cpuinfo = chrp_show_cpuinfo, 594 .init_IRQ = chrp_init_IRQ, 595 .restart = rtas_restart, 596 .halt = rtas_halt, 597 .time_init = chrp_time_init, 598 .set_rtc_time = chrp_set_rtc_time, 599 .get_rtc_time = chrp_get_rtc_time, 600 .calibrate_decr = generic_calibrate_decr, 601 .phys_mem_access_prot = pci_phys_mem_access_prot, 602 }; 603