1 /* 2 * Copyright (C) 1995 Linus Torvalds 3 * Adapted from 'alpha' version by Gary Thomas 4 * Modified by Cort Dougan (cort@cs.nmt.edu) 5 */ 6 7 /* 8 * bootup setup stuff.. 9 */ 10 11 #include <linux/errno.h> 12 #include <linux/sched.h> 13 #include <linux/kernel.h> 14 #include <linux/mm.h> 15 #include <linux/stddef.h> 16 #include <linux/unistd.h> 17 #include <linux/ptrace.h> 18 #include <linux/slab.h> 19 #include <linux/user.h> 20 #include <linux/tty.h> 21 #include <linux/major.h> 22 #include <linux/interrupt.h> 23 #include <linux/reboot.h> 24 #include <linux/init.h> 25 #include <linux/pci.h> 26 #include <generated/utsrelease.h> 27 #include <linux/adb.h> 28 #include <linux/module.h> 29 #include <linux/delay.h> 30 #include <linux/console.h> 31 #include <linux/seq_file.h> 32 #include <linux/root_dev.h> 33 #include <linux/initrd.h> 34 #include <linux/timer.h> 35 36 #include <asm/io.h> 37 #include <asm/pgtable.h> 38 #include <asm/prom.h> 39 #include <asm/pci-bridge.h> 40 #include <asm/dma.h> 41 #include <asm/machdep.h> 42 #include <asm/irq.h> 43 #include <asm/hydra.h> 44 #include <asm/sections.h> 45 #include <asm/time.h> 46 #include <asm/i8259.h> 47 #include <asm/mpic.h> 48 #include <asm/rtas.h> 49 #include <asm/xmon.h> 50 51 #include "chrp.h" 52 #include "gg2.h" 53 54 void rtas_indicator_progress(char *, unsigned short); 55 56 int _chrp_type; 57 EXPORT_SYMBOL(_chrp_type); 58 59 static struct mpic *chrp_mpic; 60 61 /* Used for doing CHRP event-scans */ 62 DEFINE_PER_CPU(struct timer_list, heartbeat_timer); 63 unsigned long event_scan_interval; 64 65 extern unsigned long loops_per_jiffy; 66 67 /* To be replaced by RTAS when available */ 68 static unsigned int __iomem *briq_SPOR; 69 70 #ifdef CONFIG_SMP 71 extern struct smp_ops_t chrp_smp_ops; 72 #endif 73 74 static const char *gg2_memtypes[4] = { 75 "FPM", "SDRAM", "EDO", "BEDO" 76 }; 77 static const char *gg2_cachesizes[4] = { 78 "256 KB", "512 KB", "1 MB", "Reserved" 79 }; 80 static const char *gg2_cachetypes[4] = { 81 "Asynchronous", "Reserved", "Flow-Through Synchronous", 82 "Pipelined Synchronous" 83 }; 84 static const char *gg2_cachemodes[4] = { 85 "Disabled", "Write-Through", "Copy-Back", "Transparent Mode" 86 }; 87 88 static const char *chrp_names[] = { 89 "Unknown", 90 "","","", 91 "Motorola", 92 "IBM or Longtrail", 93 "Genesi Pegasos", 94 "Total Impact Briq" 95 }; 96 97 void chrp_show_cpuinfo(struct seq_file *m) 98 { 99 int i, sdramen; 100 unsigned int t; 101 struct device_node *root; 102 const char *model = ""; 103 104 root = of_find_node_by_path("/"); 105 if (root) 106 model = of_get_property(root, "model", NULL); 107 seq_printf(m, "machine\t\t: CHRP %s\n", model); 108 109 /* longtrail (goldengate) stuff */ 110 if (model && !strncmp(model, "IBM,LongTrail", 13)) { 111 /* VLSI VAS96011/12 `Golden Gate 2' */ 112 /* Memory banks */ 113 sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL) 114 >>31) & 1; 115 for (i = 0; i < (sdramen ? 4 : 6); i++) { 116 t = in_le32(gg2_pci_config_base+ 117 GG2_PCI_DRAM_BANK0+ 118 i*4); 119 if (!(t & 1)) 120 continue; 121 switch ((t>>8) & 0x1f) { 122 case 0x1f: 123 model = "4 MB"; 124 break; 125 case 0x1e: 126 model = "8 MB"; 127 break; 128 case 0x1c: 129 model = "16 MB"; 130 break; 131 case 0x18: 132 model = "32 MB"; 133 break; 134 case 0x10: 135 model = "64 MB"; 136 break; 137 case 0x00: 138 model = "128 MB"; 139 break; 140 default: 141 model = "Reserved"; 142 break; 143 } 144 seq_printf(m, "memory bank %d\t: %s %s\n", i, model, 145 gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]); 146 } 147 /* L2 cache */ 148 t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL); 149 seq_printf(m, "board l2\t: %s %s (%s)\n", 150 gg2_cachesizes[(t>>7) & 3], 151 gg2_cachetypes[(t>>2) & 3], 152 gg2_cachemodes[t & 3]); 153 } 154 of_node_put(root); 155 } 156 157 /* 158 * Fixes for the National Semiconductor PC78308VUL SuperI/O 159 * 160 * Some versions of Open Firmware incorrectly initialize the IRQ settings 161 * for keyboard and mouse 162 */ 163 static inline void __init sio_write(u8 val, u8 index) 164 { 165 outb(index, 0x15c); 166 outb(val, 0x15d); 167 } 168 169 static inline u8 __init sio_read(u8 index) 170 { 171 outb(index, 0x15c); 172 return inb(0x15d); 173 } 174 175 static void __init sio_fixup_irq(const char *name, u8 device, u8 level, 176 u8 type) 177 { 178 u8 level0, type0, active; 179 180 /* select logical device */ 181 sio_write(device, 0x07); 182 active = sio_read(0x30); 183 level0 = sio_read(0x70); 184 type0 = sio_read(0x71); 185 if (level0 != level || type0 != type || !active) { 186 printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: " 187 "remapping to level %d, type %d, active\n", 188 name, level0, type0, !active ? "in" : "", level, type); 189 sio_write(0x01, 0x30); 190 sio_write(level, 0x70); 191 sio_write(type, 0x71); 192 } 193 } 194 195 static void __init sio_init(void) 196 { 197 struct device_node *root; 198 const char *model; 199 200 root = of_find_node_by_path("/"); 201 if (!root) 202 return; 203 204 model = of_get_property(root, "model", NULL); 205 if (model && !strncmp(model, "IBM,LongTrail", 13)) { 206 /* logical device 0 (KBC/Keyboard) */ 207 sio_fixup_irq("keyboard", 0, 1, 2); 208 /* select logical device 1 (KBC/Mouse) */ 209 sio_fixup_irq("mouse", 1, 12, 2); 210 } 211 212 of_node_put(root); 213 } 214 215 216 static void __init pegasos_set_l2cr(void) 217 { 218 struct device_node *np; 219 220 /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */ 221 if (_chrp_type != _CHRP_Pegasos) 222 return; 223 224 /* Enable L2 cache if needed */ 225 np = of_find_node_by_type(NULL, "cpu"); 226 if (np != NULL) { 227 const unsigned int *l2cr = of_get_property(np, "l2cr", NULL); 228 if (l2cr == NULL) { 229 printk ("Pegasos l2cr : no cpu l2cr property found\n"); 230 goto out; 231 } 232 if (!((*l2cr) & 0x80000000)) { 233 printk ("Pegasos l2cr : L2 cache was not active, " 234 "activating\n"); 235 _set_L2CR(0); 236 _set_L2CR((*l2cr) | 0x80000000); 237 } 238 } 239 out: 240 of_node_put(np); 241 } 242 243 static void briq_restart(char *cmd) 244 { 245 local_irq_disable(); 246 if (briq_SPOR) 247 out_be32(briq_SPOR, 0); 248 for(;;); 249 } 250 251 /* 252 * Per default, input/output-device points to the keyboard/screen 253 * If no card is installed, the built-in serial port is used as a fallback. 254 * But unfortunately, the firmware does not connect /chosen/{stdin,stdout} 255 * the the built-in serial node. Instead, a /failsafe node is created. 256 */ 257 static void chrp_init_early(void) 258 { 259 struct device_node *node; 260 const char *property; 261 262 if (strstr(cmd_line, "console=")) 263 return; 264 /* find the boot console from /chosen/stdout */ 265 if (!of_chosen) 266 return; 267 node = of_find_node_by_path("/"); 268 if (!node) 269 return; 270 property = of_get_property(node, "model", NULL); 271 if (!property) 272 goto out_put; 273 if (strcmp(property, "Pegasos2")) 274 goto out_put; 275 /* this is a Pegasos2 */ 276 property = of_get_property(of_chosen, "linux,stdout-path", NULL); 277 if (!property) 278 goto out_put; 279 of_node_put(node); 280 node = of_find_node_by_path(property); 281 if (!node) 282 return; 283 property = of_get_property(node, "device_type", NULL); 284 if (!property) 285 goto out_put; 286 if (strcmp(property, "serial")) 287 goto out_put; 288 /* 289 * The 9pin connector is either /failsafe 290 * or /pci@80000000/isa@C/serial@i2F8 291 * The optional graphics card has also type 'serial' in VGA mode. 292 */ 293 property = of_get_property(node, "name", NULL); 294 if (!property) 295 goto out_put; 296 if (!strcmp(property, "failsafe") || !strcmp(property, "serial")) 297 add_preferred_console("ttyS", 0, NULL); 298 out_put: 299 of_node_put(node); 300 } 301 302 void __init chrp_setup_arch(void) 303 { 304 struct device_node *root = of_find_node_by_path("/"); 305 const char *machine = NULL; 306 307 /* init to some ~sane value until calibrate_delay() runs */ 308 loops_per_jiffy = 50000000/HZ; 309 310 if (root) 311 machine = of_get_property(root, "model", NULL); 312 if (machine && strncmp(machine, "Pegasos", 7) == 0) { 313 _chrp_type = _CHRP_Pegasos; 314 } else if (machine && strncmp(machine, "IBM", 3) == 0) { 315 _chrp_type = _CHRP_IBM; 316 } else if (machine && strncmp(machine, "MOT", 3) == 0) { 317 _chrp_type = _CHRP_Motorola; 318 } else if (machine && strncmp(machine, "TotalImpact,BRIQ-1", 18) == 0) { 319 _chrp_type = _CHRP_briq; 320 /* Map the SPOR register on briq and change the restart hook */ 321 briq_SPOR = ioremap(0xff0000e8, 4); 322 ppc_md.restart = briq_restart; 323 } else { 324 /* Let's assume it is an IBM chrp if all else fails */ 325 _chrp_type = _CHRP_IBM; 326 } 327 of_node_put(root); 328 printk("chrp type = %x [%s]\n", _chrp_type, chrp_names[_chrp_type]); 329 330 rtas_initialize(); 331 if (rtas_token("display-character") >= 0) 332 ppc_md.progress = rtas_progress; 333 334 /* use RTAS time-of-day routines if available */ 335 if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) { 336 ppc_md.get_boot_time = rtas_get_boot_time; 337 ppc_md.get_rtc_time = rtas_get_rtc_time; 338 ppc_md.set_rtc_time = rtas_set_rtc_time; 339 } 340 341 /* On pegasos, enable the L2 cache if not already done by OF */ 342 pegasos_set_l2cr(); 343 344 /* Lookup PCI host bridges */ 345 chrp_find_bridges(); 346 347 /* 348 * Temporary fixes for PCI devices. 349 * -- Geert 350 */ 351 hydra_init(); /* Mac I/O */ 352 353 /* 354 * Fix the Super I/O configuration 355 */ 356 sio_init(); 357 358 pci_create_OF_bus_map(); 359 360 /* 361 * Print the banner, then scroll down so boot progress 362 * can be printed. -- Cort 363 */ 364 if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0); 365 } 366 367 static void chrp_8259_cascade(unsigned int irq, struct irq_desc *desc) 368 { 369 unsigned int cascade_irq = i8259_irq(); 370 if (cascade_irq != NO_IRQ) 371 generic_handle_irq(cascade_irq); 372 desc->chip->eoi(irq); 373 } 374 375 /* 376 * Finds the open-pic node and sets up the mpic driver. 377 */ 378 static void __init chrp_find_openpic(void) 379 { 380 struct device_node *np, *root; 381 int len, i, j; 382 int isu_size, idu_size; 383 const unsigned int *iranges, *opprop = NULL; 384 int oplen = 0; 385 unsigned long opaddr; 386 int na = 1; 387 388 np = of_find_node_by_type(NULL, "open-pic"); 389 if (np == NULL) 390 return; 391 root = of_find_node_by_path("/"); 392 if (root) { 393 opprop = of_get_property(root, "platform-open-pic", &oplen); 394 na = of_n_addr_cells(root); 395 } 396 if (opprop && oplen >= na * sizeof(unsigned int)) { 397 opaddr = opprop[na-1]; /* assume 32-bit */ 398 oplen /= na * sizeof(unsigned int); 399 } else { 400 struct resource r; 401 if (of_address_to_resource(np, 0, &r)) { 402 goto bail; 403 } 404 opaddr = r.start; 405 oplen = 0; 406 } 407 408 printk(KERN_INFO "OpenPIC at %lx\n", opaddr); 409 410 iranges = of_get_property(np, "interrupt-ranges", &len); 411 if (iranges == NULL) 412 len = 0; /* non-distributed mpic */ 413 else 414 len /= 2 * sizeof(unsigned int); 415 416 /* 417 * The first pair of cells in interrupt-ranges refers to the 418 * IDU; subsequent pairs refer to the ISUs. 419 */ 420 if (oplen < len) { 421 printk(KERN_ERR "Insufficient addresses for distributed" 422 " OpenPIC (%d < %d)\n", oplen, len); 423 len = oplen; 424 } 425 426 isu_size = 0; 427 idu_size = 0; 428 if (len > 0 && iranges[1] != 0) { 429 printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n", 430 iranges[0], iranges[0] + iranges[1] - 1); 431 idu_size = iranges[1]; 432 } 433 if (len > 1) 434 isu_size = iranges[3]; 435 436 chrp_mpic = mpic_alloc(np, opaddr, MPIC_PRIMARY, 437 isu_size, 0, " MPIC "); 438 if (chrp_mpic == NULL) { 439 printk(KERN_ERR "Failed to allocate MPIC structure\n"); 440 goto bail; 441 } 442 j = na - 1; 443 for (i = 1; i < len; ++i) { 444 iranges += 2; 445 j += na; 446 printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x\n", 447 iranges[0], iranges[0] + iranges[1] - 1, 448 opprop[j]); 449 mpic_assign_isu(chrp_mpic, i - 1, opprop[j]); 450 } 451 452 mpic_init(chrp_mpic); 453 ppc_md.get_irq = mpic_get_irq; 454 bail: 455 of_node_put(root); 456 of_node_put(np); 457 } 458 459 #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON) 460 static struct irqaction xmon_irqaction = { 461 .handler = xmon_irq, 462 .name = "XMON break", 463 }; 464 #endif 465 466 static void __init chrp_find_8259(void) 467 { 468 struct device_node *np, *pic = NULL; 469 unsigned long chrp_int_ack = 0; 470 unsigned int cascade_irq; 471 472 /* Look for cascade */ 473 for_each_node_by_type(np, "interrupt-controller") 474 if (of_device_is_compatible(np, "chrp,iic")) { 475 pic = np; 476 break; 477 } 478 /* Ok, 8259 wasn't found. We need to handle the case where 479 * we have a pegasos that claims to be chrp but doesn't have 480 * a proper interrupt tree 481 */ 482 if (pic == NULL && chrp_mpic != NULL) { 483 printk(KERN_ERR "i8259: Not found in device-tree" 484 " assuming no legacy interrupts\n"); 485 return; 486 } 487 488 /* Look for intack. In a perfect world, we would look for it on 489 * the ISA bus that holds the 8259 but heh... Works that way. If 490 * we ever see a problem, we can try to re-use the pSeries code here. 491 * Also, Pegasos-type platforms don't have a proper node to start 492 * from anyway 493 */ 494 for_each_node_by_name(np, "pci") { 495 const unsigned int *addrp = of_get_property(np, 496 "8259-interrupt-acknowledge", NULL); 497 498 if (addrp == NULL) 499 continue; 500 chrp_int_ack = addrp[of_n_addr_cells(np)-1]; 501 break; 502 } 503 of_node_put(np); 504 if (np == NULL) 505 printk(KERN_WARNING "Cannot find PCI interrupt acknowledge" 506 " address, polling\n"); 507 508 i8259_init(pic, chrp_int_ack); 509 if (ppc_md.get_irq == NULL) { 510 ppc_md.get_irq = i8259_irq; 511 irq_set_default_host(i8259_get_host()); 512 } 513 if (chrp_mpic != NULL) { 514 cascade_irq = irq_of_parse_and_map(pic, 0); 515 if (cascade_irq == NO_IRQ) 516 printk(KERN_ERR "i8259: failed to map cascade irq\n"); 517 else 518 set_irq_chained_handler(cascade_irq, 519 chrp_8259_cascade); 520 } 521 } 522 523 void __init chrp_init_IRQ(void) 524 { 525 #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON) 526 struct device_node *kbd; 527 #endif 528 chrp_find_openpic(); 529 chrp_find_8259(); 530 531 #ifdef CONFIG_SMP 532 /* Pegasos has no MPIC, those ops would make it crash. It might be an 533 * option to move setting them to after we probe the PIC though 534 */ 535 if (chrp_mpic != NULL) 536 smp_ops = &chrp_smp_ops; 537 #endif /* CONFIG_SMP */ 538 539 if (_chrp_type == _CHRP_Pegasos) 540 ppc_md.get_irq = i8259_irq; 541 542 #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON) 543 /* see if there is a keyboard in the device tree 544 with a parent of type "adb" */ 545 for_each_node_by_name(kbd, "keyboard") 546 if (kbd->parent && kbd->parent->type 547 && strcmp(kbd->parent->type, "adb") == 0) 548 break; 549 of_node_put(kbd); 550 if (kbd) 551 setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction); 552 #endif 553 } 554 555 void __init 556 chrp_init2(void) 557 { 558 #ifdef CONFIG_NVRAM 559 chrp_nvram_init(); 560 #endif 561 562 request_region(0x20,0x20,"pic1"); 563 request_region(0xa0,0x20,"pic2"); 564 request_region(0x00,0x20,"dma1"); 565 request_region(0x40,0x20,"timer"); 566 request_region(0x80,0x10,"dma page reg"); 567 request_region(0xc0,0x20,"dma2"); 568 569 if (ppc_md.progress) 570 ppc_md.progress(" Have fun! ", 0x7777); 571 } 572 573 static int __init chrp_probe(void) 574 { 575 char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(), 576 "device_type", NULL); 577 if (dtype == NULL) 578 return 0; 579 if (strcmp(dtype, "chrp")) 580 return 0; 581 582 ISA_DMA_THRESHOLD = ~0L; 583 DMA_MODE_READ = 0x44; 584 DMA_MODE_WRITE = 0x48; 585 586 return 1; 587 } 588 589 define_machine(chrp) { 590 .name = "CHRP", 591 .probe = chrp_probe, 592 .setup_arch = chrp_setup_arch, 593 .init = chrp_init2, 594 .init_early = chrp_init_early, 595 .show_cpuinfo = chrp_show_cpuinfo, 596 .init_IRQ = chrp_init_IRQ, 597 .restart = rtas_restart, 598 .power_off = rtas_power_off, 599 .halt = rtas_halt, 600 .time_init = chrp_time_init, 601 .set_rtc_time = chrp_set_rtc_time, 602 .get_rtc_time = chrp_get_rtc_time, 603 .calibrate_decr = generic_calibrate_decr, 604 .phys_mem_access_prot = pci_phys_mem_access_prot, 605 }; 606