1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  *  Copyright (C) 1995  Linus Torvalds
4  *  Adapted from 'alpha' version by Gary Thomas
5  *  Modified by Cort Dougan (cort@cs.nmt.edu)
6  */
7 
8 /*
9  * bootup setup stuff..
10  */
11 
12 #include <linux/errno.h>
13 #include <linux/sched.h>
14 #include <linux/kernel.h>
15 #include <linux/mm.h>
16 #include <linux/stddef.h>
17 #include <linux/unistd.h>
18 #include <linux/ptrace.h>
19 #include <linux/user.h>
20 #include <linux/tty.h>
21 #include <linux/major.h>
22 #include <linux/interrupt.h>
23 #include <linux/reboot.h>
24 #include <linux/init.h>
25 #include <linux/pci.h>
26 #include <generated/utsrelease.h>
27 #include <linux/adb.h>
28 #include <linux/module.h>
29 #include <linux/delay.h>
30 #include <linux/console.h>
31 #include <linux/seq_file.h>
32 #include <linux/root_dev.h>
33 #include <linux/initrd.h>
34 #include <linux/timer.h>
35 #include <linux/of_address.h>
36 #include <linux/of_fdt.h>
37 #include <linux/of_irq.h>
38 
39 #include <asm/io.h>
40 #include <asm/pci-bridge.h>
41 #include <asm/dma.h>
42 #include <asm/machdep.h>
43 #include <asm/irq.h>
44 #include <asm/hydra.h>
45 #include <asm/sections.h>
46 #include <asm/time.h>
47 #include <asm/i8259.h>
48 #include <asm/mpic.h>
49 #include <asm/rtas.h>
50 #include <asm/xmon.h>
51 
52 #include "chrp.h"
53 #include "gg2.h"
54 
55 void rtas_indicator_progress(char *, unsigned short);
56 
57 int _chrp_type;
58 EXPORT_SYMBOL(_chrp_type);
59 
60 static struct mpic *chrp_mpic;
61 
62 /* Used for doing CHRP event-scans */
63 DEFINE_PER_CPU(struct timer_list, heartbeat_timer);
64 unsigned long event_scan_interval;
65 
66 extern unsigned long loops_per_jiffy;
67 
68 /* To be replaced by RTAS when available */
69 static unsigned int __iomem *briq_SPOR;
70 
71 #ifdef CONFIG_SMP
72 extern struct smp_ops_t chrp_smp_ops;
73 #endif
74 
75 static const char *gg2_memtypes[4] = {
76 	"FPM", "SDRAM", "EDO", "BEDO"
77 };
78 static const char *gg2_cachesizes[4] = {
79 	"256 KB", "512 KB", "1 MB", "Reserved"
80 };
81 static const char *gg2_cachetypes[4] = {
82 	"Asynchronous", "Reserved", "Flow-Through Synchronous",
83 	"Pipelined Synchronous"
84 };
85 static const char *gg2_cachemodes[4] = {
86 	"Disabled", "Write-Through", "Copy-Back", "Transparent Mode"
87 };
88 
89 static const char *chrp_names[] = {
90 	"Unknown",
91 	"","","",
92 	"Motorola",
93 	"IBM or Longtrail",
94 	"Genesi Pegasos",
95 	"Total Impact Briq"
96 };
97 
98 static void chrp_show_cpuinfo(struct seq_file *m)
99 {
100 	int i, sdramen;
101 	unsigned int t;
102 	struct device_node *root;
103 	const char *model = "";
104 
105 	root = of_find_node_by_path("/");
106 	if (root)
107 		model = of_get_property(root, "model", NULL);
108 	seq_printf(m, "machine\t\t: CHRP %s\n", model);
109 
110 	/* longtrail (goldengate) stuff */
111 	if (model && !strncmp(model, "IBM,LongTrail", 13)) {
112 		/* VLSI VAS96011/12 `Golden Gate 2' */
113 		/* Memory banks */
114 		sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL)
115 			   >>31) & 1;
116 		for (i = 0; i < (sdramen ? 4 : 6); i++) {
117 			t = in_le32(gg2_pci_config_base+
118 						 GG2_PCI_DRAM_BANK0+
119 						 i*4);
120 			if (!(t & 1))
121 				continue;
122 			switch ((t>>8) & 0x1f) {
123 			case 0x1f:
124 				model = "4 MB";
125 				break;
126 			case 0x1e:
127 				model = "8 MB";
128 				break;
129 			case 0x1c:
130 				model = "16 MB";
131 				break;
132 			case 0x18:
133 				model = "32 MB";
134 				break;
135 			case 0x10:
136 				model = "64 MB";
137 				break;
138 			case 0x00:
139 				model = "128 MB";
140 				break;
141 			default:
142 				model = "Reserved";
143 				break;
144 			}
145 			seq_printf(m, "memory bank %d\t: %s %s\n", i, model,
146 				   gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]);
147 		}
148 		/* L2 cache */
149 		t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL);
150 		seq_printf(m, "board l2\t: %s %s (%s)\n",
151 			   gg2_cachesizes[(t>>7) & 3],
152 			   gg2_cachetypes[(t>>2) & 3],
153 			   gg2_cachemodes[t & 3]);
154 	}
155 	of_node_put(root);
156 }
157 
158 /*
159  *  Fixes for the National Semiconductor PC78308VUL SuperI/O
160  *
161  *  Some versions of Open Firmware incorrectly initialize the IRQ settings
162  *  for keyboard and mouse
163  */
164 static inline void __init sio_write(u8 val, u8 index)
165 {
166 	outb(index, 0x15c);
167 	outb(val, 0x15d);
168 }
169 
170 static inline u8 __init sio_read(u8 index)
171 {
172 	outb(index, 0x15c);
173 	return inb(0x15d);
174 }
175 
176 static void __init sio_fixup_irq(const char *name, u8 device, u8 level,
177 				     u8 type)
178 {
179 	u8 level0, type0, active;
180 
181 	/* select logical device */
182 	sio_write(device, 0x07);
183 	active = sio_read(0x30);
184 	level0 = sio_read(0x70);
185 	type0 = sio_read(0x71);
186 	if (level0 != level || type0 != type || !active) {
187 		printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: "
188 		       "remapping to level %d, type %d, active\n",
189 		       name, level0, type0, !active ? "in" : "", level, type);
190 		sio_write(0x01, 0x30);
191 		sio_write(level, 0x70);
192 		sio_write(type, 0x71);
193 	}
194 }
195 
196 static void __init sio_init(void)
197 {
198 	struct device_node *root;
199 	const char *model;
200 
201 	root = of_find_node_by_path("/");
202 	if (!root)
203 		return;
204 
205 	model = of_get_property(root, "model", NULL);
206 	if (model && !strncmp(model, "IBM,LongTrail", 13)) {
207 		/* logical device 0 (KBC/Keyboard) */
208 		sio_fixup_irq("keyboard", 0, 1, 2);
209 		/* select logical device 1 (KBC/Mouse) */
210 		sio_fixup_irq("mouse", 1, 12, 2);
211 	}
212 
213 	of_node_put(root);
214 }
215 
216 
217 static void __init pegasos_set_l2cr(void)
218 {
219 	struct device_node *np;
220 
221 	/* On Pegasos, enable the l2 cache if needed, as the OF forgets it */
222 	if (_chrp_type != _CHRP_Pegasos)
223 		return;
224 
225 	/* Enable L2 cache if needed */
226 	np = of_find_node_by_type(NULL, "cpu");
227 	if (np != NULL) {
228 		const unsigned int *l2cr = of_get_property(np, "l2cr", NULL);
229 		if (l2cr == NULL) {
230 			printk ("Pegasos l2cr : no cpu l2cr property found\n");
231 			goto out;
232 		}
233 		if (!((*l2cr) & 0x80000000)) {
234 			printk ("Pegasos l2cr : L2 cache was not active, "
235 				"activating\n");
236 			_set_L2CR(0);
237 			_set_L2CR((*l2cr) | 0x80000000);
238 		}
239 	}
240 out:
241 	of_node_put(np);
242 }
243 
244 static void __noreturn briq_restart(char *cmd)
245 {
246 	local_irq_disable();
247 	if (briq_SPOR)
248 		out_be32(briq_SPOR, 0);
249 	for(;;);
250 }
251 
252 /*
253  * Per default, input/output-device points to the keyboard/screen
254  * If no card is installed, the built-in serial port is used as a fallback.
255  * But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
256  * to the built-in serial node. Instead, a /failsafe node is created.
257  */
258 static __init void chrp_init(void)
259 {
260 	struct device_node *node;
261 	const char *property;
262 
263 	if (strstr(boot_command_line, "console="))
264 		return;
265 	/* find the boot console from /chosen/stdout */
266 	if (!of_chosen)
267 		return;
268 	node = of_find_node_by_path("/");
269 	if (!node)
270 		return;
271 	property = of_get_property(node, "model", NULL);
272 	if (!property)
273 		goto out_put;
274 	if (strcmp(property, "Pegasos2"))
275 		goto out_put;
276 	/* this is a Pegasos2 */
277 	property = of_get_property(of_chosen, "linux,stdout-path", NULL);
278 	if (!property)
279 		goto out_put;
280 	of_node_put(node);
281 	node = of_find_node_by_path(property);
282 	if (!node)
283 		return;
284 	if (!of_node_is_type(node, "serial"))
285 		goto out_put;
286 	/*
287 	 * The 9pin connector is either /failsafe
288 	 * or /pci@80000000/isa@C/serial@i2F8
289 	 * The optional graphics card has also type 'serial' in VGA mode.
290 	 */
291 	if (of_node_name_eq(node, "failsafe") || of_node_name_eq(node, "serial"))
292 		add_preferred_console("ttyS", 0, NULL);
293 out_put:
294 	of_node_put(node);
295 }
296 
297 static void __init chrp_setup_arch(void)
298 {
299 	struct device_node *root = of_find_node_by_path("/");
300 	const char *machine = NULL;
301 
302 	/* init to some ~sane value until calibrate_delay() runs */
303 	loops_per_jiffy = 50000000/HZ;
304 
305 	if (root)
306 		machine = of_get_property(root, "model", NULL);
307 	if (machine && strncmp(machine, "Pegasos", 7) == 0) {
308 		_chrp_type = _CHRP_Pegasos;
309 	} else if (machine && strncmp(machine, "IBM", 3) == 0) {
310 		_chrp_type = _CHRP_IBM;
311 	} else if (machine && strncmp(machine, "MOT", 3) == 0) {
312 		_chrp_type = _CHRP_Motorola;
313 	} else if (machine && strncmp(machine, "TotalImpact,BRIQ-1", 18) == 0) {
314 		_chrp_type = _CHRP_briq;
315 		/* Map the SPOR register on briq and change the restart hook */
316 		briq_SPOR = ioremap(0xff0000e8, 4);
317 		ppc_md.restart = briq_restart;
318 	} else {
319 		/* Let's assume it is an IBM chrp if all else fails */
320 		_chrp_type = _CHRP_IBM;
321 	}
322 	of_node_put(root);
323 	printk("chrp type = %x [%s]\n", _chrp_type, chrp_names[_chrp_type]);
324 
325 	rtas_initialize();
326 	if (rtas_function_token(RTAS_FN_DISPLAY_CHARACTER) >= 0)
327 		ppc_md.progress = rtas_progress;
328 
329 	/* use RTAS time-of-day routines if available */
330 	if (rtas_function_token(RTAS_FN_GET_TIME_OF_DAY) != RTAS_UNKNOWN_SERVICE) {
331 		ppc_md.get_boot_time	= rtas_get_boot_time;
332 		ppc_md.get_rtc_time	= rtas_get_rtc_time;
333 		ppc_md.set_rtc_time	= rtas_set_rtc_time;
334 	}
335 
336 	/* On pegasos, enable the L2 cache if not already done by OF */
337 	pegasos_set_l2cr();
338 
339 	/*
340 	 *  Fix the Super I/O configuration
341 	 */
342 	sio_init();
343 
344 	/*
345 	 * Print the banner, then scroll down so boot progress
346 	 * can be printed.  -- Cort
347 	 */
348 	if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0);
349 }
350 
351 static void chrp_8259_cascade(struct irq_desc *desc)
352 {
353 	struct irq_chip *chip = irq_desc_get_chip(desc);
354 	unsigned int cascade_irq = i8259_irq();
355 
356 	if (cascade_irq)
357 		generic_handle_irq(cascade_irq);
358 
359 	chip->irq_eoi(&desc->irq_data);
360 }
361 
362 /*
363  * Finds the open-pic node and sets up the mpic driver.
364  */
365 static void __init chrp_find_openpic(void)
366 {
367 	struct device_node *np, *root;
368 	int len, i, j;
369 	int isu_size;
370 	const unsigned int *iranges, *opprop = NULL;
371 	int oplen = 0;
372 	unsigned long opaddr;
373 	int na = 1;
374 
375 	np = of_find_node_by_type(NULL, "open-pic");
376 	if (np == NULL)
377 		return;
378 	root = of_find_node_by_path("/");
379 	if (root) {
380 		opprop = of_get_property(root, "platform-open-pic", &oplen);
381 		na = of_n_addr_cells(root);
382 	}
383 	if (opprop && oplen >= na * sizeof(unsigned int)) {
384 		opaddr = opprop[na-1];	/* assume 32-bit */
385 		oplen /= na * sizeof(unsigned int);
386 	} else {
387 		struct resource r;
388 		if (of_address_to_resource(np, 0, &r)) {
389 			goto bail;
390 		}
391 		opaddr = r.start;
392 		oplen = 0;
393 	}
394 
395 	printk(KERN_INFO "OpenPIC at %lx\n", opaddr);
396 
397 	iranges = of_get_property(np, "interrupt-ranges", &len);
398 	if (iranges == NULL)
399 		len = 0;	/* non-distributed mpic */
400 	else
401 		len /= 2 * sizeof(unsigned int);
402 
403 	/*
404 	 * The first pair of cells in interrupt-ranges refers to the
405 	 * IDU; subsequent pairs refer to the ISUs.
406 	 */
407 	if (oplen < len) {
408 		printk(KERN_ERR "Insufficient addresses for distributed"
409 		       " OpenPIC (%d < %d)\n", oplen, len);
410 		len = oplen;
411 	}
412 
413 	isu_size = 0;
414 	if (len > 0 && iranges[1] != 0) {
415 		printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n",
416 		       iranges[0], iranges[0] + iranges[1] - 1);
417 	}
418 	if (len > 1)
419 		isu_size = iranges[3];
420 
421 	chrp_mpic = mpic_alloc(np, opaddr, MPIC_NO_RESET,
422 			isu_size, 0, " MPIC    ");
423 	if (chrp_mpic == NULL) {
424 		printk(KERN_ERR "Failed to allocate MPIC structure\n");
425 		goto bail;
426 	}
427 	j = na - 1;
428 	for (i = 1; i < len; ++i) {
429 		iranges += 2;
430 		j += na;
431 		printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x\n",
432 		       iranges[0], iranges[0] + iranges[1] - 1,
433 		       opprop[j]);
434 		mpic_assign_isu(chrp_mpic, i - 1, opprop[j]);
435 	}
436 
437 	mpic_init(chrp_mpic);
438 	ppc_md.get_irq = mpic_get_irq;
439  bail:
440 	of_node_put(root);
441 	of_node_put(np);
442 }
443 
444 static void __init chrp_find_8259(void)
445 {
446 	struct device_node *np, *pic = NULL;
447 	unsigned long chrp_int_ack = 0;
448 	unsigned int cascade_irq;
449 
450 	/* Look for cascade */
451 	for_each_node_by_type(np, "interrupt-controller")
452 		if (of_device_is_compatible(np, "chrp,iic")) {
453 			pic = np;
454 			break;
455 		}
456 	/* Ok, 8259 wasn't found. We need to handle the case where
457 	 * we have a pegasos that claims to be chrp but doesn't have
458 	 * a proper interrupt tree
459 	 */
460 	if (pic == NULL && chrp_mpic != NULL) {
461 		printk(KERN_ERR "i8259: Not found in device-tree"
462 		       " assuming no legacy interrupts\n");
463 		return;
464 	}
465 
466 	/* Look for intack. In a perfect world, we would look for it on
467 	 * the ISA bus that holds the 8259 but heh... Works that way. If
468 	 * we ever see a problem, we can try to re-use the pSeries code here.
469 	 * Also, Pegasos-type platforms don't have a proper node to start
470 	 * from anyway
471 	 */
472 	for_each_node_by_name(np, "pci") {
473 		const unsigned int *addrp = of_get_property(np,
474 				"8259-interrupt-acknowledge", NULL);
475 
476 		if (addrp == NULL)
477 			continue;
478 		chrp_int_ack = addrp[of_n_addr_cells(np)-1];
479 		break;
480 	}
481 	of_node_put(np);
482 	if (np == NULL)
483 		printk(KERN_WARNING "Cannot find PCI interrupt acknowledge"
484 		       " address, polling\n");
485 
486 	i8259_init(pic, chrp_int_ack);
487 	if (ppc_md.get_irq == NULL) {
488 		ppc_md.get_irq = i8259_irq;
489 		irq_set_default_host(i8259_get_host());
490 	}
491 	if (chrp_mpic != NULL) {
492 		cascade_irq = irq_of_parse_and_map(pic, 0);
493 		if (!cascade_irq)
494 			printk(KERN_ERR "i8259: failed to map cascade irq\n");
495 		else
496 			irq_set_chained_handler(cascade_irq,
497 						chrp_8259_cascade);
498 	}
499 }
500 
501 static void __init chrp_init_IRQ(void)
502 {
503 #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
504 	struct device_node *kbd;
505 #endif
506 	chrp_find_openpic();
507 	chrp_find_8259();
508 
509 #ifdef CONFIG_SMP
510 	/* Pegasos has no MPIC, those ops would make it crash. It might be an
511 	 * option to move setting them to after we probe the PIC though
512 	 */
513 	if (chrp_mpic != NULL)
514 		smp_ops = &chrp_smp_ops;
515 #endif /* CONFIG_SMP */
516 
517 	if (_chrp_type == _CHRP_Pegasos)
518 		ppc_md.get_irq        = i8259_irq;
519 
520 #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
521 	/* see if there is a keyboard in the device tree
522 	   with a parent of type "adb" */
523 	for_each_node_by_name(kbd, "keyboard")
524 		if (of_node_is_type(kbd->parent, "adb"))
525 			break;
526 	of_node_put(kbd);
527 	if (kbd) {
528 		if (request_irq(HYDRA_INT_ADB_NMI, xmon_irq, 0, "XMON break",
529 				NULL))
530 			pr_err("Failed to register XMON break interrupt\n");
531 	}
532 #endif
533 }
534 
535 static void __init
536 chrp_init2(void)
537 {
538 #if IS_ENABLED(CONFIG_NVRAM)
539 	chrp_nvram_init();
540 #endif
541 
542 	request_region(0x20,0x20,"pic1");
543 	request_region(0xa0,0x20,"pic2");
544 	request_region(0x00,0x20,"dma1");
545 	request_region(0x40,0x20,"timer");
546 	request_region(0x80,0x10,"dma page reg");
547 	request_region(0xc0,0x20,"dma2");
548 
549 	if (ppc_md.progress)
550 		ppc_md.progress("  Have fun!    ", 0x7777);
551 }
552 
553 static int __init chrp_probe(void)
554 {
555 	const char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(),
556 						"device_type", NULL);
557  	if (dtype == NULL)
558  		return 0;
559  	if (strcmp(dtype, "chrp"))
560 		return 0;
561 
562 	DMA_MODE_READ = 0x44;
563 	DMA_MODE_WRITE = 0x48;
564 
565 	pm_power_off = rtas_power_off;
566 
567 	chrp_init();
568 
569 	return 1;
570 }
571 
572 define_machine(chrp) {
573 	.name			= "CHRP",
574 	.probe			= chrp_probe,
575 	.setup_arch		= chrp_setup_arch,
576 	.discover_phbs		= chrp_find_bridges,
577 	.init			= chrp_init2,
578 	.show_cpuinfo		= chrp_show_cpuinfo,
579 	.init_IRQ		= chrp_init_IRQ,
580 	.restart		= rtas_restart,
581 	.halt			= rtas_halt,
582 	.time_init		= chrp_time_init,
583 	.set_rtc_time		= chrp_set_rtc_time,
584 	.get_rtc_time		= chrp_get_rtc_time,
585 	.phys_mem_access_prot	= pci_phys_mem_access_prot,
586 };
587