1 // SPDX-License-Identifier: GPL-2.0 2 #define DEBUG 3 4 #include <linux/wait.h> 5 #include <linux/ptrace.h> 6 7 #include <asm/spu.h> 8 #include <asm/spu_priv1.h> 9 #include <asm/io.h> 10 #include <asm/unistd.h> 11 12 #include "spufs.h" 13 14 /* interrupt-level stop callback function. */ 15 void spufs_stop_callback(struct spu *spu, int irq) 16 { 17 struct spu_context *ctx = spu->ctx; 18 19 /* 20 * It should be impossible to preempt a context while an exception 21 * is being processed, since the context switch code is specially 22 * coded to deal with interrupts ... But, just in case, sanity check 23 * the context pointer. It is OK to return doing nothing since 24 * the exception will be regenerated when the context is resumed. 25 */ 26 if (ctx) { 27 /* Copy exception arguments into module specific structure */ 28 switch(irq) { 29 case 0 : 30 ctx->csa.class_0_pending = spu->class_0_pending; 31 ctx->csa.class_0_dar = spu->class_0_dar; 32 break; 33 case 1 : 34 ctx->csa.class_1_dsisr = spu->class_1_dsisr; 35 ctx->csa.class_1_dar = spu->class_1_dar; 36 break; 37 case 2 : 38 break; 39 } 40 41 /* ensure that the exception status has hit memory before a 42 * thread waiting on the context's stop queue is woken */ 43 smp_wmb(); 44 45 wake_up_all(&ctx->stop_wq); 46 } 47 } 48 49 int spu_stopped(struct spu_context *ctx, u32 *stat) 50 { 51 u64 dsisr; 52 u32 stopped; 53 54 stopped = SPU_STATUS_INVALID_INSTR | SPU_STATUS_SINGLE_STEP | 55 SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP; 56 57 top: 58 *stat = ctx->ops->status_read(ctx); 59 if (*stat & stopped) { 60 /* 61 * If the spu hasn't finished stopping, we need to 62 * re-read the register to get the stopped value. 63 */ 64 if (*stat & SPU_STATUS_RUNNING) 65 goto top; 66 return 1; 67 } 68 69 if (test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags)) 70 return 1; 71 72 dsisr = ctx->csa.class_1_dsisr; 73 if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)) 74 return 1; 75 76 if (ctx->csa.class_0_pending) 77 return 1; 78 79 return 0; 80 } 81 82 static int spu_setup_isolated(struct spu_context *ctx) 83 { 84 int ret; 85 u64 __iomem *mfc_cntl; 86 u64 sr1; 87 u32 status; 88 unsigned long timeout; 89 const u32 status_loading = SPU_STATUS_RUNNING 90 | SPU_STATUS_ISOLATED_STATE | SPU_STATUS_ISOLATED_LOAD_STATUS; 91 92 ret = -ENODEV; 93 if (!isolated_loader) 94 goto out; 95 96 /* 97 * We need to exclude userspace access to the context. 98 * 99 * To protect against memory access we invalidate all ptes 100 * and make sure the pagefault handlers block on the mutex. 101 */ 102 spu_unmap_mappings(ctx); 103 104 mfc_cntl = &ctx->spu->priv2->mfc_control_RW; 105 106 /* purge the MFC DMA queue to ensure no spurious accesses before we 107 * enter kernel mode */ 108 timeout = jiffies + HZ; 109 out_be64(mfc_cntl, MFC_CNTL_PURGE_DMA_REQUEST); 110 while ((in_be64(mfc_cntl) & MFC_CNTL_PURGE_DMA_STATUS_MASK) 111 != MFC_CNTL_PURGE_DMA_COMPLETE) { 112 if (time_after(jiffies, timeout)) { 113 printk(KERN_ERR "%s: timeout flushing MFC DMA queue\n", 114 __func__); 115 ret = -EIO; 116 goto out; 117 } 118 cond_resched(); 119 } 120 121 /* clear purge status */ 122 out_be64(mfc_cntl, 0); 123 124 /* put the SPE in kernel mode to allow access to the loader */ 125 sr1 = spu_mfc_sr1_get(ctx->spu); 126 sr1 &= ~MFC_STATE1_PROBLEM_STATE_MASK; 127 spu_mfc_sr1_set(ctx->spu, sr1); 128 129 /* start the loader */ 130 ctx->ops->signal1_write(ctx, (unsigned long)isolated_loader >> 32); 131 ctx->ops->signal2_write(ctx, 132 (unsigned long)isolated_loader & 0xffffffff); 133 134 ctx->ops->runcntl_write(ctx, 135 SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE); 136 137 ret = 0; 138 timeout = jiffies + HZ; 139 while (((status = ctx->ops->status_read(ctx)) & status_loading) == 140 status_loading) { 141 if (time_after(jiffies, timeout)) { 142 printk(KERN_ERR "%s: timeout waiting for loader\n", 143 __func__); 144 ret = -EIO; 145 goto out_drop_priv; 146 } 147 cond_resched(); 148 } 149 150 if (!(status & SPU_STATUS_RUNNING)) { 151 /* If isolated LOAD has failed: run SPU, we will get a stop-and 152 * signal later. */ 153 pr_debug("%s: isolated LOAD failed\n", __func__); 154 ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE); 155 ret = -EACCES; 156 goto out_drop_priv; 157 } 158 159 if (!(status & SPU_STATUS_ISOLATED_STATE)) { 160 /* This isn't allowed by the CBEA, but check anyway */ 161 pr_debug("%s: SPU fell out of isolated mode?\n", __func__); 162 ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_STOP); 163 ret = -EINVAL; 164 goto out_drop_priv; 165 } 166 167 out_drop_priv: 168 /* Finished accessing the loader. Drop kernel mode */ 169 sr1 |= MFC_STATE1_PROBLEM_STATE_MASK; 170 spu_mfc_sr1_set(ctx->spu, sr1); 171 172 out: 173 return ret; 174 } 175 176 static int spu_run_init(struct spu_context *ctx, u32 *npc) 177 { 178 unsigned long runcntl = SPU_RUNCNTL_RUNNABLE; 179 int ret; 180 181 spuctx_switch_state(ctx, SPU_UTIL_SYSTEM); 182 183 /* 184 * NOSCHED is synchronous scheduling with respect to the caller. 185 * The caller waits for the context to be loaded. 186 */ 187 if (ctx->flags & SPU_CREATE_NOSCHED) { 188 if (ctx->state == SPU_STATE_SAVED) { 189 ret = spu_activate(ctx, 0); 190 if (ret) 191 return ret; 192 } 193 } 194 195 /* 196 * Apply special setup as required. 197 */ 198 if (ctx->flags & SPU_CREATE_ISOLATE) { 199 if (!(ctx->ops->status_read(ctx) & SPU_STATUS_ISOLATED_STATE)) { 200 ret = spu_setup_isolated(ctx); 201 if (ret) 202 return ret; 203 } 204 205 /* 206 * If userspace has set the runcntrl register (eg, to 207 * issue an isolated exit), we need to re-set it here 208 */ 209 runcntl = ctx->ops->runcntl_read(ctx) & 210 (SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE); 211 if (runcntl == 0) 212 runcntl = SPU_RUNCNTL_RUNNABLE; 213 } else { 214 unsigned long privcntl; 215 216 if (test_thread_flag(TIF_SINGLESTEP)) 217 privcntl = SPU_PRIVCNTL_MODE_SINGLE_STEP; 218 else 219 privcntl = SPU_PRIVCNTL_MODE_NORMAL; 220 221 ctx->ops->privcntl_write(ctx, privcntl); 222 ctx->ops->npc_write(ctx, *npc); 223 } 224 225 ctx->ops->runcntl_write(ctx, runcntl); 226 227 if (ctx->flags & SPU_CREATE_NOSCHED) { 228 spuctx_switch_state(ctx, SPU_UTIL_USER); 229 } else { 230 231 if (ctx->state == SPU_STATE_SAVED) { 232 ret = spu_activate(ctx, 0); 233 if (ret) 234 return ret; 235 } else { 236 spuctx_switch_state(ctx, SPU_UTIL_USER); 237 } 238 } 239 240 set_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags); 241 return 0; 242 } 243 244 static int spu_run_fini(struct spu_context *ctx, u32 *npc, 245 u32 *status) 246 { 247 int ret = 0; 248 249 spu_del_from_rq(ctx); 250 251 *status = ctx->ops->status_read(ctx); 252 *npc = ctx->ops->npc_read(ctx); 253 254 spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED); 255 clear_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags); 256 spu_switch_log_notify(NULL, ctx, SWITCH_LOG_EXIT, *status); 257 spu_release(ctx); 258 259 if (signal_pending(current)) 260 ret = -ERESTARTSYS; 261 262 return ret; 263 } 264 265 /* 266 * SPU syscall restarting is tricky because we violate the basic 267 * assumption that the signal handler is running on the interrupted 268 * thread. Here instead, the handler runs on PowerPC user space code, 269 * while the syscall was called from the SPU. 270 * This means we can only do a very rough approximation of POSIX 271 * signal semantics. 272 */ 273 static int spu_handle_restartsys(struct spu_context *ctx, long *spu_ret, 274 unsigned int *npc) 275 { 276 int ret; 277 278 switch (*spu_ret) { 279 case -ERESTARTSYS: 280 case -ERESTARTNOINTR: 281 /* 282 * Enter the regular syscall restarting for 283 * sys_spu_run, then restart the SPU syscall 284 * callback. 285 */ 286 *npc -= 8; 287 ret = -ERESTARTSYS; 288 break; 289 case -ERESTARTNOHAND: 290 case -ERESTART_RESTARTBLOCK: 291 /* 292 * Restart block is too hard for now, just return -EINTR 293 * to the SPU. 294 * ERESTARTNOHAND comes from sys_pause, we also return 295 * -EINTR from there. 296 * Assume that we need to be restarted ourselves though. 297 */ 298 *spu_ret = -EINTR; 299 ret = -ERESTARTSYS; 300 break; 301 default: 302 printk(KERN_WARNING "%s: unexpected return code %ld\n", 303 __func__, *spu_ret); 304 ret = 0; 305 } 306 return ret; 307 } 308 309 static int spu_process_callback(struct spu_context *ctx) 310 { 311 struct spu_syscall_block s; 312 u32 ls_pointer, npc; 313 void __iomem *ls; 314 long spu_ret; 315 int ret; 316 317 /* get syscall block from local store */ 318 npc = ctx->ops->npc_read(ctx) & ~3; 319 ls = (void __iomem *)ctx->ops->get_ls(ctx); 320 ls_pointer = in_be32(ls + npc); 321 if (ls_pointer > (LS_SIZE - sizeof(s))) 322 return -EFAULT; 323 memcpy_fromio(&s, ls + ls_pointer, sizeof(s)); 324 325 /* do actual syscall without pinning the spu */ 326 ret = 0; 327 spu_ret = -ENOSYS; 328 npc += 4; 329 330 if (s.nr_ret < NR_syscalls) { 331 spu_release(ctx); 332 /* do actual system call from here */ 333 spu_ret = spu_sys_callback(&s); 334 if (spu_ret <= -ERESTARTSYS) { 335 ret = spu_handle_restartsys(ctx, &spu_ret, &npc); 336 } 337 mutex_lock(&ctx->state_mutex); 338 if (ret == -ERESTARTSYS) 339 return ret; 340 } 341 342 /* need to re-get the ls, as it may have changed when we released the 343 * spu */ 344 ls = (void __iomem *)ctx->ops->get_ls(ctx); 345 346 /* write result, jump over indirect pointer */ 347 memcpy_toio(ls + ls_pointer, &spu_ret, sizeof(spu_ret)); 348 ctx->ops->npc_write(ctx, npc); 349 ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE); 350 return ret; 351 } 352 353 long spufs_run_spu(struct spu_context *ctx, u32 *npc, u32 *event) 354 { 355 int ret; 356 struct spu *spu; 357 u32 status; 358 359 if (mutex_lock_interruptible(&ctx->run_mutex)) 360 return -ERESTARTSYS; 361 362 ctx->event_return = 0; 363 364 ret = spu_acquire(ctx); 365 if (ret) 366 goto out_unlock; 367 368 spu_enable_spu(ctx); 369 370 spu_update_sched_info(ctx); 371 372 ret = spu_run_init(ctx, npc); 373 if (ret) { 374 spu_release(ctx); 375 goto out; 376 } 377 378 do { 379 ret = spufs_wait(ctx->stop_wq, spu_stopped(ctx, &status)); 380 if (unlikely(ret)) { 381 /* 382 * This is nasty: we need the state_mutex for all the 383 * bookkeeping even if the syscall was interrupted by 384 * a signal. ewww. 385 */ 386 mutex_lock(&ctx->state_mutex); 387 break; 388 } 389 spu = ctx->spu; 390 if (unlikely(test_and_clear_bit(SPU_SCHED_NOTIFY_ACTIVE, 391 &ctx->sched_flags))) { 392 if (!(status & SPU_STATUS_STOPPED_BY_STOP)) { 393 spu_switch_notify(spu, ctx); 394 continue; 395 } 396 } 397 398 spuctx_switch_state(ctx, SPU_UTIL_SYSTEM); 399 400 if ((status & SPU_STATUS_STOPPED_BY_STOP) && 401 (status >> SPU_STOP_STATUS_SHIFT == 0x2104)) { 402 ret = spu_process_callback(ctx); 403 if (ret) 404 break; 405 status &= ~SPU_STATUS_STOPPED_BY_STOP; 406 } 407 ret = spufs_handle_class1(ctx); 408 if (ret) 409 break; 410 411 ret = spufs_handle_class0(ctx); 412 if (ret) 413 break; 414 415 if (signal_pending(current)) 416 ret = -ERESTARTSYS; 417 } while (!ret && !(status & (SPU_STATUS_STOPPED_BY_STOP | 418 SPU_STATUS_STOPPED_BY_HALT | 419 SPU_STATUS_SINGLE_STEP))); 420 421 spu_disable_spu(ctx); 422 ret = spu_run_fini(ctx, npc, &status); 423 spu_yield(ctx); 424 425 if ((status & SPU_STATUS_STOPPED_BY_STOP) && 426 (((status >> SPU_STOP_STATUS_SHIFT) & 0x3f00) == 0x2100)) 427 ctx->stats.libassist++; 428 429 if ((ret == 0) || 430 ((ret == -ERESTARTSYS) && 431 ((status & SPU_STATUS_STOPPED_BY_HALT) || 432 (status & SPU_STATUS_SINGLE_STEP) || 433 ((status & SPU_STATUS_STOPPED_BY_STOP) && 434 (status >> SPU_STOP_STATUS_SHIFT != 0x2104))))) 435 ret = status; 436 437 /* Note: we don't need to force_sig SIGTRAP on single-step 438 * since we have TIF_SINGLESTEP set, thus the kernel will do 439 * it upon return from the syscall anyway. 440 */ 441 if (unlikely(status & SPU_STATUS_SINGLE_STEP)) 442 ret = -ERESTARTSYS; 443 444 else if (unlikely((status & SPU_STATUS_STOPPED_BY_STOP) 445 && (status >> SPU_STOP_STATUS_SHIFT) == 0x3fff)) { 446 force_sig(SIGTRAP, current); 447 ret = -ERESTARTSYS; 448 } 449 450 out: 451 *event = ctx->event_return; 452 out_unlock: 453 mutex_unlock(&ctx->run_mutex); 454 return ret; 455 } 456