xref: /openbmc/linux/arch/powerpc/platforms/cell/smp.c (revision 53a448c3)
1 /*
2  * SMP support for BPA machines.
3  *
4  * Dave Engebretsen, Peter Bergner, and
5  * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
6  *
7  * Plus various changes from other IBM teams...
8  *
9  *      This program is free software; you can redistribute it and/or
10  *      modify it under the terms of the GNU General Public License
11  *      as published by the Free Software Foundation; either version
12  *      2 of the License, or (at your option) any later version.
13  */
14 
15 #undef DEBUG
16 
17 #include <linux/kernel.h>
18 #include <linux/sched.h>
19 #include <linux/smp.h>
20 #include <linux/interrupt.h>
21 #include <linux/delay.h>
22 #include <linux/init.h>
23 #include <linux/spinlock.h>
24 #include <linux/cache.h>
25 #include <linux/err.h>
26 #include <linux/device.h>
27 #include <linux/cpu.h>
28 
29 #include <asm/ptrace.h>
30 #include <linux/atomic.h>
31 #include <asm/irq.h>
32 #include <asm/page.h>
33 #include <asm/pgtable.h>
34 #include <asm/io.h>
35 #include <asm/prom.h>
36 #include <asm/smp.h>
37 #include <asm/paca.h>
38 #include <asm/machdep.h>
39 #include <asm/cputable.h>
40 #include <asm/firmware.h>
41 #include <asm/rtas.h>
42 #include <asm/cputhreads.h>
43 #include <asm/code-patching.h>
44 
45 #include "interrupt.h"
46 #include <asm/udbg.h>
47 
48 #ifdef DEBUG
49 #define DBG(fmt...) udbg_printf(fmt)
50 #else
51 #define DBG(fmt...)
52 #endif
53 
54 /*
55  * The Primary thread of each non-boot processor was started from the OF client
56  * interface by prom_hold_cpus and is spinning on secondary_hold_spinloop.
57  */
58 static cpumask_t of_spin_map;
59 
60 /**
61  * smp_startup_cpu() - start the given cpu
62  *
63  * At boot time, there is nothing to do for primary threads which were
64  * started from Open Firmware.  For anything else, call RTAS with the
65  * appropriate start location.
66  *
67  * Returns:
68  *	0	- failure
69  *	1	- success
70  */
71 static inline int smp_startup_cpu(unsigned int lcpu)
72 {
73 	int status;
74 	unsigned long start_here =
75 			__pa(ppc_function_entry(generic_secondary_smp_init));
76 	unsigned int pcpu;
77 	int start_cpu;
78 
79 	if (cpumask_test_cpu(lcpu, &of_spin_map))
80 		/* Already started by OF and sitting in spin loop */
81 		return 1;
82 
83 	pcpu = get_hard_smp_processor_id(lcpu);
84 
85 	/* Fixup atomic count: it exited inside IRQ handler. */
86 	task_thread_info(paca[lcpu].__current)->preempt_count	= 0;
87 
88 	/*
89 	 * If the RTAS start-cpu token does not exist then presume the
90 	 * cpu is already spinning.
91 	 */
92 	start_cpu = rtas_token("start-cpu");
93 	if (start_cpu == RTAS_UNKNOWN_SERVICE)
94 		return 1;
95 
96 	status = rtas_call(start_cpu, 3, 1, NULL, pcpu, start_here, lcpu);
97 	if (status != 0) {
98 		printk(KERN_ERR "start-cpu failed: %i\n", status);
99 		return 0;
100 	}
101 
102 	return 1;
103 }
104 
105 static int __init smp_iic_probe(void)
106 {
107 	iic_request_IPIs();
108 
109 	return num_possible_cpus();
110 }
111 
112 static void smp_cell_setup_cpu(int cpu)
113 {
114 	if (cpu != boot_cpuid)
115 		iic_setup_cpu();
116 
117 	/*
118 	 * change default DABRX to allow user watchpoints
119 	 */
120 	mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
121 }
122 
123 static int smp_cell_kick_cpu(int nr)
124 {
125 	BUG_ON(nr < 0 || nr >= NR_CPUS);
126 
127 	if (!smp_startup_cpu(nr))
128 		return -ENOENT;
129 
130 	/*
131 	 * The processor is currently spinning, waiting for the
132 	 * cpu_start field to become non-zero After we set cpu_start,
133 	 * the processor will continue on to secondary_start
134 	 */
135 	paca[nr].cpu_start = 1;
136 
137 	return 0;
138 }
139 
140 static struct smp_ops_t bpa_iic_smp_ops = {
141 	.message_pass	= iic_message_pass,
142 	.probe		= smp_iic_probe,
143 	.kick_cpu	= smp_cell_kick_cpu,
144 	.setup_cpu	= smp_cell_setup_cpu,
145 	.cpu_bootable	= smp_generic_cpu_bootable,
146 };
147 
148 /* This is called very early */
149 void __init smp_init_cell(void)
150 {
151 	int i;
152 
153 	DBG(" -> smp_init_cell()\n");
154 
155 	smp_ops = &bpa_iic_smp_ops;
156 
157 	/* Mark threads which are still spinning in hold loops. */
158 	if (cpu_has_feature(CPU_FTR_SMT)) {
159 		for_each_present_cpu(i) {
160 			if (cpu_thread_in_core(i) == 0)
161 				cpumask_set_cpu(i, &of_spin_map);
162 		}
163 	} else
164 		cpumask_copy(&of_spin_map, cpu_present_mask);
165 
166 	cpumask_clear_cpu(boot_cpuid, &of_spin_map);
167 
168 	/* Non-lpar has additional take/give timebase */
169 	if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
170 		smp_ops->give_timebase = rtas_give_timebase;
171 		smp_ops->take_timebase = rtas_take_timebase;
172 	}
173 
174 	DBG(" <- smp_init_cell()\n");
175 }
176