1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * IOMMU implementation for Cell Broadband Processor Architecture 4 * 5 * (C) Copyright IBM Corporation 2006-2008 6 * 7 * Author: Jeremy Kerr <jk@ozlabs.org> 8 */ 9 10 #undef DEBUG 11 12 #include <linux/kernel.h> 13 #include <linux/init.h> 14 #include <linux/interrupt.h> 15 #include <linux/irqdomain.h> 16 #include <linux/notifier.h> 17 #include <linux/of.h> 18 #include <linux/of_address.h> 19 #include <linux/of_platform.h> 20 #include <linux/slab.h> 21 #include <linux/memblock.h> 22 23 #include <asm/prom.h> 24 #include <asm/iommu.h> 25 #include <asm/machdep.h> 26 #include <asm/pci-bridge.h> 27 #include <asm/udbg.h> 28 #include <asm/firmware.h> 29 #include <asm/cell-regs.h> 30 31 #include "cell.h" 32 #include "interrupt.h" 33 34 /* Define CELL_IOMMU_REAL_UNMAP to actually unmap non-used pages 35 * instead of leaving them mapped to some dummy page. This can be 36 * enabled once the appropriate workarounds for spider bugs have 37 * been enabled 38 */ 39 #define CELL_IOMMU_REAL_UNMAP 40 41 /* Define CELL_IOMMU_STRICT_PROTECTION to enforce protection of 42 * IO PTEs based on the transfer direction. That can be enabled 43 * once spider-net has been fixed to pass the correct direction 44 * to the DMA mapping functions 45 */ 46 #define CELL_IOMMU_STRICT_PROTECTION 47 48 49 #define NR_IOMMUS 2 50 51 /* IOC mmap registers */ 52 #define IOC_Reg_Size 0x2000 53 54 #define IOC_IOPT_CacheInvd 0x908 55 #define IOC_IOPT_CacheInvd_NE_Mask 0xffe0000000000000ul 56 #define IOC_IOPT_CacheInvd_IOPTE_Mask 0x000003fffffffff8ul 57 #define IOC_IOPT_CacheInvd_Busy 0x0000000000000001ul 58 59 #define IOC_IOST_Origin 0x918 60 #define IOC_IOST_Origin_E 0x8000000000000000ul 61 #define IOC_IOST_Origin_HW 0x0000000000000800ul 62 #define IOC_IOST_Origin_HL 0x0000000000000400ul 63 64 #define IOC_IO_ExcpStat 0x920 65 #define IOC_IO_ExcpStat_V 0x8000000000000000ul 66 #define IOC_IO_ExcpStat_SPF_Mask 0x6000000000000000ul 67 #define IOC_IO_ExcpStat_SPF_S 0x6000000000000000ul 68 #define IOC_IO_ExcpStat_SPF_P 0x2000000000000000ul 69 #define IOC_IO_ExcpStat_ADDR_Mask 0x00000007fffff000ul 70 #define IOC_IO_ExcpStat_RW_Mask 0x0000000000000800ul 71 #define IOC_IO_ExcpStat_IOID_Mask 0x00000000000007fful 72 73 #define IOC_IO_ExcpMask 0x928 74 #define IOC_IO_ExcpMask_SFE 0x4000000000000000ul 75 #define IOC_IO_ExcpMask_PFE 0x2000000000000000ul 76 77 #define IOC_IOCmd_Offset 0x1000 78 79 #define IOC_IOCmd_Cfg 0xc00 80 #define IOC_IOCmd_Cfg_TE 0x0000800000000000ul 81 82 83 /* Segment table entries */ 84 #define IOSTE_V 0x8000000000000000ul /* valid */ 85 #define IOSTE_H 0x4000000000000000ul /* cache hint */ 86 #define IOSTE_PT_Base_RPN_Mask 0x3ffffffffffff000ul /* base RPN of IOPT */ 87 #define IOSTE_NPPT_Mask 0x0000000000000fe0ul /* no. pages in IOPT */ 88 #define IOSTE_PS_Mask 0x0000000000000007ul /* page size */ 89 #define IOSTE_PS_4K 0x0000000000000001ul /* - 4kB */ 90 #define IOSTE_PS_64K 0x0000000000000003ul /* - 64kB */ 91 #define IOSTE_PS_1M 0x0000000000000005ul /* - 1MB */ 92 #define IOSTE_PS_16M 0x0000000000000007ul /* - 16MB */ 93 94 95 /* IOMMU sizing */ 96 #define IO_SEGMENT_SHIFT 28 97 #define IO_PAGENO_BITS(shift) (IO_SEGMENT_SHIFT - (shift)) 98 99 /* The high bit needs to be set on every DMA address */ 100 #define SPIDER_DMA_OFFSET 0x80000000ul 101 102 struct iommu_window { 103 struct list_head list; 104 struct cbe_iommu *iommu; 105 unsigned long offset; 106 unsigned long size; 107 unsigned int ioid; 108 struct iommu_table table; 109 }; 110 111 #define NAMESIZE 8 112 struct cbe_iommu { 113 int nid; 114 char name[NAMESIZE]; 115 void __iomem *xlate_regs; 116 void __iomem *cmd_regs; 117 unsigned long *stab; 118 unsigned long *ptab; 119 void *pad_page; 120 struct list_head windows; 121 }; 122 123 /* Static array of iommus, one per node 124 * each contains a list of windows, keyed from dma_window property 125 * - on bus setup, look for a matching window, or create one 126 * - on dev setup, assign iommu_table ptr 127 */ 128 static struct cbe_iommu iommus[NR_IOMMUS]; 129 static int cbe_nr_iommus; 130 131 static void invalidate_tce_cache(struct cbe_iommu *iommu, unsigned long *pte, 132 long n_ptes) 133 { 134 u64 __iomem *reg; 135 u64 val; 136 long n; 137 138 reg = iommu->xlate_regs + IOC_IOPT_CacheInvd; 139 140 while (n_ptes > 0) { 141 /* we can invalidate up to 1 << 11 PTEs at once */ 142 n = min(n_ptes, 1l << 11); 143 val = (((n /*- 1*/) << 53) & IOC_IOPT_CacheInvd_NE_Mask) 144 | (__pa(pte) & IOC_IOPT_CacheInvd_IOPTE_Mask) 145 | IOC_IOPT_CacheInvd_Busy; 146 147 out_be64(reg, val); 148 while (in_be64(reg) & IOC_IOPT_CacheInvd_Busy) 149 ; 150 151 n_ptes -= n; 152 pte += n; 153 } 154 } 155 156 static int tce_build_cell(struct iommu_table *tbl, long index, long npages, 157 unsigned long uaddr, enum dma_data_direction direction, 158 unsigned long attrs) 159 { 160 int i; 161 unsigned long *io_pte, base_pte; 162 struct iommu_window *window = 163 container_of(tbl, struct iommu_window, table); 164 165 /* implementing proper protection causes problems with the spidernet 166 * driver - check mapping directions later, but allow read & write by 167 * default for now.*/ 168 #ifdef CELL_IOMMU_STRICT_PROTECTION 169 /* to avoid referencing a global, we use a trick here to setup the 170 * protection bit. "prot" is setup to be 3 fields of 4 bits appended 171 * together for each of the 3 supported direction values. It is then 172 * shifted left so that the fields matching the desired direction 173 * lands on the appropriate bits, and other bits are masked out. 174 */ 175 const unsigned long prot = 0xc48; 176 base_pte = 177 ((prot << (52 + 4 * direction)) & 178 (CBE_IOPTE_PP_W | CBE_IOPTE_PP_R)) | 179 CBE_IOPTE_M | CBE_IOPTE_SO_RW | 180 (window->ioid & CBE_IOPTE_IOID_Mask); 181 #else 182 base_pte = CBE_IOPTE_PP_W | CBE_IOPTE_PP_R | CBE_IOPTE_M | 183 CBE_IOPTE_SO_RW | (window->ioid & CBE_IOPTE_IOID_Mask); 184 #endif 185 if (unlikely(attrs & DMA_ATTR_WEAK_ORDERING)) 186 base_pte &= ~CBE_IOPTE_SO_RW; 187 188 io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset); 189 190 for (i = 0; i < npages; i++, uaddr += (1 << tbl->it_page_shift)) 191 io_pte[i] = base_pte | (__pa(uaddr) & CBE_IOPTE_RPN_Mask); 192 193 mb(); 194 195 invalidate_tce_cache(window->iommu, io_pte, npages); 196 197 pr_debug("tce_build_cell(index=%lx,n=%lx,dir=%d,base_pte=%lx)\n", 198 index, npages, direction, base_pte); 199 return 0; 200 } 201 202 static void tce_free_cell(struct iommu_table *tbl, long index, long npages) 203 { 204 205 int i; 206 unsigned long *io_pte, pte; 207 struct iommu_window *window = 208 container_of(tbl, struct iommu_window, table); 209 210 pr_debug("tce_free_cell(index=%lx,n=%lx)\n", index, npages); 211 212 #ifdef CELL_IOMMU_REAL_UNMAP 213 pte = 0; 214 #else 215 /* spider bridge does PCI reads after freeing - insert a mapping 216 * to a scratch page instead of an invalid entry */ 217 pte = CBE_IOPTE_PP_R | CBE_IOPTE_M | CBE_IOPTE_SO_RW | 218 __pa(window->iommu->pad_page) | 219 (window->ioid & CBE_IOPTE_IOID_Mask); 220 #endif 221 222 io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset); 223 224 for (i = 0; i < npages; i++) 225 io_pte[i] = pte; 226 227 mb(); 228 229 invalidate_tce_cache(window->iommu, io_pte, npages); 230 } 231 232 static irqreturn_t ioc_interrupt(int irq, void *data) 233 { 234 unsigned long stat, spf; 235 struct cbe_iommu *iommu = data; 236 237 stat = in_be64(iommu->xlate_regs + IOC_IO_ExcpStat); 238 spf = stat & IOC_IO_ExcpStat_SPF_Mask; 239 240 /* Might want to rate limit it */ 241 printk(KERN_ERR "iommu: DMA exception 0x%016lx\n", stat); 242 printk(KERN_ERR " V=%d, SPF=[%c%c], RW=%s, IOID=0x%04x\n", 243 !!(stat & IOC_IO_ExcpStat_V), 244 (spf == IOC_IO_ExcpStat_SPF_S) ? 'S' : ' ', 245 (spf == IOC_IO_ExcpStat_SPF_P) ? 'P' : ' ', 246 (stat & IOC_IO_ExcpStat_RW_Mask) ? "Read" : "Write", 247 (unsigned int)(stat & IOC_IO_ExcpStat_IOID_Mask)); 248 printk(KERN_ERR " page=0x%016lx\n", 249 stat & IOC_IO_ExcpStat_ADDR_Mask); 250 251 /* clear interrupt */ 252 stat &= ~IOC_IO_ExcpStat_V; 253 out_be64(iommu->xlate_regs + IOC_IO_ExcpStat, stat); 254 255 return IRQ_HANDLED; 256 } 257 258 static int __init cell_iommu_find_ioc(int nid, unsigned long *base) 259 { 260 struct device_node *np; 261 struct resource r; 262 263 *base = 0; 264 265 /* First look for new style /be nodes */ 266 for_each_node_by_name(np, "ioc") { 267 if (of_node_to_nid(np) != nid) 268 continue; 269 if (of_address_to_resource(np, 0, &r)) { 270 printk(KERN_ERR "iommu: can't get address for %pOF\n", 271 np); 272 continue; 273 } 274 *base = r.start; 275 of_node_put(np); 276 return 0; 277 } 278 279 /* Ok, let's try the old way */ 280 for_each_node_by_type(np, "cpu") { 281 const unsigned int *nidp; 282 const unsigned long *tmp; 283 284 nidp = of_get_property(np, "node-id", NULL); 285 if (nidp && *nidp == nid) { 286 tmp = of_get_property(np, "ioc-translation", NULL); 287 if (tmp) { 288 *base = *tmp; 289 of_node_put(np); 290 return 0; 291 } 292 } 293 } 294 295 return -ENODEV; 296 } 297 298 static void __init cell_iommu_setup_stab(struct cbe_iommu *iommu, 299 unsigned long dbase, unsigned long dsize, 300 unsigned long fbase, unsigned long fsize) 301 { 302 struct page *page; 303 unsigned long segments, stab_size; 304 305 segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT; 306 307 pr_debug("%s: iommu[%d]: segments: %lu\n", 308 __func__, iommu->nid, segments); 309 310 /* set up the segment table */ 311 stab_size = segments * sizeof(unsigned long); 312 page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(stab_size)); 313 BUG_ON(!page); 314 iommu->stab = page_address(page); 315 memset(iommu->stab, 0, stab_size); 316 } 317 318 static unsigned long *__init cell_iommu_alloc_ptab(struct cbe_iommu *iommu, 319 unsigned long base, unsigned long size, unsigned long gap_base, 320 unsigned long gap_size, unsigned long page_shift) 321 { 322 struct page *page; 323 int i; 324 unsigned long reg, segments, pages_per_segment, ptab_size, 325 n_pte_pages, start_seg, *ptab; 326 327 start_seg = base >> IO_SEGMENT_SHIFT; 328 segments = size >> IO_SEGMENT_SHIFT; 329 pages_per_segment = 1ull << IO_PAGENO_BITS(page_shift); 330 /* PTEs for each segment must start on a 4K boundary */ 331 pages_per_segment = max(pages_per_segment, 332 (1 << 12) / sizeof(unsigned long)); 333 334 ptab_size = segments * pages_per_segment * sizeof(unsigned long); 335 pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __func__, 336 iommu->nid, ptab_size, get_order(ptab_size)); 337 page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size)); 338 BUG_ON(!page); 339 340 ptab = page_address(page); 341 memset(ptab, 0, ptab_size); 342 343 /* number of 4K pages needed for a page table */ 344 n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12; 345 346 pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n", 347 __func__, iommu->nid, iommu->stab, ptab, 348 n_pte_pages); 349 350 /* initialise the STEs */ 351 reg = IOSTE_V | ((n_pte_pages - 1) << 5); 352 353 switch (page_shift) { 354 case 12: reg |= IOSTE_PS_4K; break; 355 case 16: reg |= IOSTE_PS_64K; break; 356 case 20: reg |= IOSTE_PS_1M; break; 357 case 24: reg |= IOSTE_PS_16M; break; 358 default: BUG(); 359 } 360 361 gap_base = gap_base >> IO_SEGMENT_SHIFT; 362 gap_size = gap_size >> IO_SEGMENT_SHIFT; 363 364 pr_debug("Setting up IOMMU stab:\n"); 365 for (i = start_seg; i < (start_seg + segments); i++) { 366 if (i >= gap_base && i < (gap_base + gap_size)) { 367 pr_debug("\toverlap at %d, skipping\n", i); 368 continue; 369 } 370 iommu->stab[i] = reg | (__pa(ptab) + (n_pte_pages << 12) * 371 (i - start_seg)); 372 pr_debug("\t[%d] 0x%016lx\n", i, iommu->stab[i]); 373 } 374 375 return ptab; 376 } 377 378 static void __init cell_iommu_enable_hardware(struct cbe_iommu *iommu) 379 { 380 int ret; 381 unsigned long reg, xlate_base; 382 unsigned int virq; 383 384 if (cell_iommu_find_ioc(iommu->nid, &xlate_base)) 385 panic("%s: missing IOC register mappings for node %d\n", 386 __func__, iommu->nid); 387 388 iommu->xlate_regs = ioremap(xlate_base, IOC_Reg_Size); 389 iommu->cmd_regs = iommu->xlate_regs + IOC_IOCmd_Offset; 390 391 /* ensure that the STEs have updated */ 392 mb(); 393 394 /* setup interrupts for the iommu. */ 395 reg = in_be64(iommu->xlate_regs + IOC_IO_ExcpStat); 396 out_be64(iommu->xlate_regs + IOC_IO_ExcpStat, 397 reg & ~IOC_IO_ExcpStat_V); 398 out_be64(iommu->xlate_regs + IOC_IO_ExcpMask, 399 IOC_IO_ExcpMask_PFE | IOC_IO_ExcpMask_SFE); 400 401 virq = irq_create_mapping(NULL, 402 IIC_IRQ_IOEX_ATI | (iommu->nid << IIC_IRQ_NODE_SHIFT)); 403 BUG_ON(!virq); 404 405 ret = request_irq(virq, ioc_interrupt, 0, iommu->name, iommu); 406 BUG_ON(ret); 407 408 /* set the IOC segment table origin register (and turn on the iommu) */ 409 reg = IOC_IOST_Origin_E | __pa(iommu->stab) | IOC_IOST_Origin_HW; 410 out_be64(iommu->xlate_regs + IOC_IOST_Origin, reg); 411 in_be64(iommu->xlate_regs + IOC_IOST_Origin); 412 413 /* turn on IO translation */ 414 reg = in_be64(iommu->cmd_regs + IOC_IOCmd_Cfg) | IOC_IOCmd_Cfg_TE; 415 out_be64(iommu->cmd_regs + IOC_IOCmd_Cfg, reg); 416 } 417 418 static void __init cell_iommu_setup_hardware(struct cbe_iommu *iommu, 419 unsigned long base, unsigned long size) 420 { 421 cell_iommu_setup_stab(iommu, base, size, 0, 0); 422 iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0, 423 IOMMU_PAGE_SHIFT_4K); 424 cell_iommu_enable_hardware(iommu); 425 } 426 427 #if 0/* Unused for now */ 428 static struct iommu_window *find_window(struct cbe_iommu *iommu, 429 unsigned long offset, unsigned long size) 430 { 431 struct iommu_window *window; 432 433 /* todo: check for overlapping (but not equal) windows) */ 434 435 list_for_each_entry(window, &(iommu->windows), list) { 436 if (window->offset == offset && window->size == size) 437 return window; 438 } 439 440 return NULL; 441 } 442 #endif 443 444 static inline u32 cell_iommu_get_ioid(struct device_node *np) 445 { 446 const u32 *ioid; 447 448 ioid = of_get_property(np, "ioid", NULL); 449 if (ioid == NULL) { 450 printk(KERN_WARNING "iommu: missing ioid for %pOF using 0\n", 451 np); 452 return 0; 453 } 454 455 return *ioid; 456 } 457 458 static struct iommu_table_ops cell_iommu_ops = { 459 .set = tce_build_cell, 460 .clear = tce_free_cell 461 }; 462 463 static struct iommu_window * __init 464 cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, 465 unsigned long offset, unsigned long size, 466 unsigned long pte_offset) 467 { 468 struct iommu_window *window; 469 struct page *page; 470 u32 ioid; 471 472 ioid = cell_iommu_get_ioid(np); 473 474 window = kzalloc_node(sizeof(*window), GFP_KERNEL, iommu->nid); 475 BUG_ON(window == NULL); 476 477 window->offset = offset; 478 window->size = size; 479 window->ioid = ioid; 480 window->iommu = iommu; 481 482 window->table.it_blocksize = 16; 483 window->table.it_base = (unsigned long)iommu->ptab; 484 window->table.it_index = iommu->nid; 485 window->table.it_page_shift = IOMMU_PAGE_SHIFT_4K; 486 window->table.it_offset = 487 (offset >> window->table.it_page_shift) + pte_offset; 488 window->table.it_size = size >> window->table.it_page_shift; 489 window->table.it_ops = &cell_iommu_ops; 490 491 if (!iommu_init_table(&window->table, iommu->nid, 0, 0)) 492 panic("Failed to initialize iommu table"); 493 494 pr_debug("\tioid %d\n", window->ioid); 495 pr_debug("\tblocksize %ld\n", window->table.it_blocksize); 496 pr_debug("\tbase 0x%016lx\n", window->table.it_base); 497 pr_debug("\toffset 0x%lx\n", window->table.it_offset); 498 pr_debug("\tsize %ld\n", window->table.it_size); 499 500 list_add(&window->list, &iommu->windows); 501 502 if (offset != 0) 503 return window; 504 505 /* We need to map and reserve the first IOMMU page since it's used 506 * by the spider workaround. In theory, we only need to do that when 507 * running on spider but it doesn't really matter. 508 * 509 * This code also assumes that we have a window that starts at 0, 510 * which is the case on all spider based blades. 511 */ 512 page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0); 513 BUG_ON(!page); 514 iommu->pad_page = page_address(page); 515 clear_page(iommu->pad_page); 516 517 __set_bit(0, window->table.it_map); 518 tce_build_cell(&window->table, window->table.it_offset, 1, 519 (unsigned long)iommu->pad_page, DMA_TO_DEVICE, 0); 520 521 return window; 522 } 523 524 static struct cbe_iommu *cell_iommu_for_node(int nid) 525 { 526 int i; 527 528 for (i = 0; i < cbe_nr_iommus; i++) 529 if (iommus[i].nid == nid) 530 return &iommus[i]; 531 return NULL; 532 } 533 534 static unsigned long cell_dma_nommu_offset; 535 536 static unsigned long dma_iommu_fixed_base; 537 static bool cell_iommu_enabled; 538 539 /* iommu_fixed_is_weak is set if booted with iommu_fixed=weak */ 540 bool iommu_fixed_is_weak; 541 542 static struct iommu_table *cell_get_iommu_table(struct device *dev) 543 { 544 struct iommu_window *window; 545 struct cbe_iommu *iommu; 546 547 /* Current implementation uses the first window available in that 548 * node's iommu. We -might- do something smarter later though it may 549 * never be necessary 550 */ 551 iommu = cell_iommu_for_node(dev_to_node(dev)); 552 if (iommu == NULL || list_empty(&iommu->windows)) { 553 dev_err(dev, "iommu: missing iommu for %pOF (node %d)\n", 554 dev->of_node, dev_to_node(dev)); 555 return NULL; 556 } 557 window = list_entry(iommu->windows.next, struct iommu_window, list); 558 559 return &window->table; 560 } 561 562 static u64 cell_iommu_get_fixed_address(struct device *dev); 563 564 static void cell_dma_dev_setup(struct device *dev) 565 { 566 if (cell_iommu_enabled) { 567 u64 addr = cell_iommu_get_fixed_address(dev); 568 569 if (addr != OF_BAD_ADDR) 570 dev->archdata.dma_offset = addr + dma_iommu_fixed_base; 571 set_iommu_table_base(dev, cell_get_iommu_table(dev)); 572 } else { 573 dev->archdata.dma_offset = cell_dma_nommu_offset; 574 } 575 } 576 577 static void cell_pci_dma_dev_setup(struct pci_dev *dev) 578 { 579 cell_dma_dev_setup(&dev->dev); 580 } 581 582 static int cell_of_bus_notify(struct notifier_block *nb, unsigned long action, 583 void *data) 584 { 585 struct device *dev = data; 586 587 /* We are only interested in device addition */ 588 if (action != BUS_NOTIFY_ADD_DEVICE) 589 return 0; 590 591 if (cell_iommu_enabled) 592 dev->dma_ops = &dma_iommu_ops; 593 cell_dma_dev_setup(dev); 594 return 0; 595 } 596 597 static struct notifier_block cell_of_bus_notifier = { 598 .notifier_call = cell_of_bus_notify 599 }; 600 601 static int __init cell_iommu_get_window(struct device_node *np, 602 unsigned long *base, 603 unsigned long *size) 604 { 605 const __be32 *dma_window; 606 unsigned long index; 607 608 /* Use ibm,dma-window if available, else, hard code ! */ 609 dma_window = of_get_property(np, "ibm,dma-window", NULL); 610 if (dma_window == NULL) { 611 *base = 0; 612 *size = 0x80000000u; 613 return -ENODEV; 614 } 615 616 of_parse_dma_window(np, dma_window, &index, base, size); 617 return 0; 618 } 619 620 static struct cbe_iommu * __init cell_iommu_alloc(struct device_node *np) 621 { 622 struct cbe_iommu *iommu; 623 int nid, i; 624 625 /* Get node ID */ 626 nid = of_node_to_nid(np); 627 if (nid < 0) { 628 printk(KERN_ERR "iommu: failed to get node for %pOF\n", 629 np); 630 return NULL; 631 } 632 pr_debug("iommu: setting up iommu for node %d (%pOF)\n", 633 nid, np); 634 635 /* XXX todo: If we can have multiple windows on the same IOMMU, which 636 * isn't the case today, we probably want here to check whether the 637 * iommu for that node is already setup. 638 * However, there might be issue with getting the size right so let's 639 * ignore that for now. We might want to completely get rid of the 640 * multiple window support since the cell iommu supports per-page ioids 641 */ 642 643 if (cbe_nr_iommus >= NR_IOMMUS) { 644 printk(KERN_ERR "iommu: too many IOMMUs detected ! (%pOF)\n", 645 np); 646 return NULL; 647 } 648 649 /* Init base fields */ 650 i = cbe_nr_iommus++; 651 iommu = &iommus[i]; 652 iommu->stab = NULL; 653 iommu->nid = nid; 654 snprintf(iommu->name, sizeof(iommu->name), "iommu%d", i); 655 INIT_LIST_HEAD(&iommu->windows); 656 657 return iommu; 658 } 659 660 static void __init cell_iommu_init_one(struct device_node *np, 661 unsigned long offset) 662 { 663 struct cbe_iommu *iommu; 664 unsigned long base, size; 665 666 iommu = cell_iommu_alloc(np); 667 if (!iommu) 668 return; 669 670 /* Obtain a window for it */ 671 cell_iommu_get_window(np, &base, &size); 672 673 pr_debug("\ttranslating window 0x%lx...0x%lx\n", 674 base, base + size - 1); 675 676 /* Initialize the hardware */ 677 cell_iommu_setup_hardware(iommu, base, size); 678 679 /* Setup the iommu_table */ 680 cell_iommu_setup_window(iommu, np, base, size, 681 offset >> IOMMU_PAGE_SHIFT_4K); 682 } 683 684 static void __init cell_disable_iommus(void) 685 { 686 int node; 687 unsigned long base, val; 688 void __iomem *xregs, *cregs; 689 690 /* Make sure IOC translation is disabled on all nodes */ 691 for_each_online_node(node) { 692 if (cell_iommu_find_ioc(node, &base)) 693 continue; 694 xregs = ioremap(base, IOC_Reg_Size); 695 if (xregs == NULL) 696 continue; 697 cregs = xregs + IOC_IOCmd_Offset; 698 699 pr_debug("iommu: cleaning up iommu on node %d\n", node); 700 701 out_be64(xregs + IOC_IOST_Origin, 0); 702 (void)in_be64(xregs + IOC_IOST_Origin); 703 val = in_be64(cregs + IOC_IOCmd_Cfg); 704 val &= ~IOC_IOCmd_Cfg_TE; 705 out_be64(cregs + IOC_IOCmd_Cfg, val); 706 (void)in_be64(cregs + IOC_IOCmd_Cfg); 707 708 iounmap(xregs); 709 } 710 } 711 712 static int __init cell_iommu_init_disabled(void) 713 { 714 struct device_node *np = NULL; 715 unsigned long base = 0, size; 716 717 /* When no iommu is present, we use direct DMA ops */ 718 719 /* First make sure all IOC translation is turned off */ 720 cell_disable_iommus(); 721 722 /* If we have no Axon, we set up the spider DMA magic offset */ 723 np = of_find_node_by_name(NULL, "axon"); 724 if (!np) 725 cell_dma_nommu_offset = SPIDER_DMA_OFFSET; 726 of_node_put(np); 727 728 /* Now we need to check to see where the memory is mapped 729 * in PCI space. We assume that all busses use the same dma 730 * window which is always the case so far on Cell, thus we 731 * pick up the first pci-internal node we can find and check 732 * the DMA window from there. 733 */ 734 for_each_node_by_name(np, "axon") { 735 if (np->parent == NULL || np->parent->parent != NULL) 736 continue; 737 if (cell_iommu_get_window(np, &base, &size) == 0) 738 break; 739 } 740 if (np == NULL) { 741 for_each_node_by_name(np, "pci-internal") { 742 if (np->parent == NULL || np->parent->parent != NULL) 743 continue; 744 if (cell_iommu_get_window(np, &base, &size) == 0) 745 break; 746 } 747 } 748 of_node_put(np); 749 750 /* If we found a DMA window, we check if it's big enough to enclose 751 * all of physical memory. If not, we force enable IOMMU 752 */ 753 if (np && size < memblock_end_of_DRAM()) { 754 printk(KERN_WARNING "iommu: force-enabled, dma window" 755 " (%ldMB) smaller than total memory (%lldMB)\n", 756 size >> 20, memblock_end_of_DRAM() >> 20); 757 return -ENODEV; 758 } 759 760 cell_dma_nommu_offset += base; 761 762 if (cell_dma_nommu_offset != 0) 763 cell_pci_controller_ops.dma_dev_setup = cell_pci_dma_dev_setup; 764 765 printk("iommu: disabled, direct DMA offset is 0x%lx\n", 766 cell_dma_nommu_offset); 767 768 return 0; 769 } 770 771 /* 772 * Fixed IOMMU mapping support 773 * 774 * This code adds support for setting up a fixed IOMMU mapping on certain 775 * cell machines. For 64-bit devices this avoids the performance overhead of 776 * mapping and unmapping pages at runtime. 32-bit devices are unable to use 777 * the fixed mapping. 778 * 779 * The fixed mapping is established at boot, and maps all of physical memory 780 * 1:1 into device space at some offset. On machines with < 30 GB of memory 781 * we setup the fixed mapping immediately above the normal IOMMU window. 782 * 783 * For example a machine with 4GB of memory would end up with the normal 784 * IOMMU window from 0-2GB and the fixed mapping window from 2GB to 6GB. In 785 * this case a 64-bit device wishing to DMA to 1GB would be told to DMA to 786 * 3GB, plus any offset required by firmware. The firmware offset is encoded 787 * in the "dma-ranges" property. 788 * 789 * On machines with 30GB or more of memory, we are unable to place the fixed 790 * mapping above the normal IOMMU window as we would run out of address space. 791 * Instead we move the normal IOMMU window to coincide with the hash page 792 * table, this region does not need to be part of the fixed mapping as no 793 * device should ever be DMA'ing to it. We then setup the fixed mapping 794 * from 0 to 32GB. 795 */ 796 797 static u64 cell_iommu_get_fixed_address(struct device *dev) 798 { 799 u64 cpu_addr, size, best_size, dev_addr = OF_BAD_ADDR; 800 struct device_node *np; 801 const u32 *ranges = NULL; 802 int i, len, best, naddr, nsize, pna, range_size; 803 804 /* We can be called for platform devices that have no of_node */ 805 np = of_node_get(dev->of_node); 806 if (!np) 807 goto out; 808 809 while (1) { 810 naddr = of_n_addr_cells(np); 811 nsize = of_n_size_cells(np); 812 np = of_get_next_parent(np); 813 if (!np) 814 break; 815 816 ranges = of_get_property(np, "dma-ranges", &len); 817 818 /* Ignore empty ranges, they imply no translation required */ 819 if (ranges && len > 0) 820 break; 821 } 822 823 if (!ranges) { 824 dev_dbg(dev, "iommu: no dma-ranges found\n"); 825 goto out; 826 } 827 828 len /= sizeof(u32); 829 830 pna = of_n_addr_cells(np); 831 range_size = naddr + nsize + pna; 832 833 /* dma-ranges format: 834 * child addr : naddr cells 835 * parent addr : pna cells 836 * size : nsize cells 837 */ 838 for (i = 0, best = -1, best_size = 0; i < len; i += range_size) { 839 cpu_addr = of_translate_dma_address(np, ranges + i + naddr); 840 size = of_read_number(ranges + i + naddr + pna, nsize); 841 842 if (cpu_addr == 0 && size > best_size) { 843 best = i; 844 best_size = size; 845 } 846 } 847 848 if (best >= 0) { 849 dev_addr = of_read_number(ranges + best, naddr); 850 } else 851 dev_dbg(dev, "iommu: no suitable range found!\n"); 852 853 out: 854 of_node_put(np); 855 856 return dev_addr; 857 } 858 859 static bool cell_pci_iommu_bypass_supported(struct pci_dev *pdev, u64 mask) 860 { 861 return mask == DMA_BIT_MASK(64) && 862 cell_iommu_get_fixed_address(&pdev->dev) != OF_BAD_ADDR; 863 } 864 865 static void __init insert_16M_pte(unsigned long addr, unsigned long *ptab, 866 unsigned long base_pte) 867 { 868 unsigned long segment, offset; 869 870 segment = addr >> IO_SEGMENT_SHIFT; 871 offset = (addr >> 24) - (segment << IO_PAGENO_BITS(24)); 872 ptab = ptab + (segment * (1 << 12) / sizeof(unsigned long)); 873 874 pr_debug("iommu: addr %lx ptab %p segment %lx offset %lx\n", 875 addr, ptab, segment, offset); 876 877 ptab[offset] = base_pte | (__pa(addr) & CBE_IOPTE_RPN_Mask); 878 } 879 880 static void __init cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, 881 struct device_node *np, unsigned long dbase, unsigned long dsize, 882 unsigned long fbase, unsigned long fsize) 883 { 884 unsigned long base_pte, uaddr, ioaddr, *ptab; 885 886 ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, 24); 887 888 dma_iommu_fixed_base = fbase; 889 890 pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase); 891 892 base_pte = CBE_IOPTE_PP_W | CBE_IOPTE_PP_R | CBE_IOPTE_M | 893 (cell_iommu_get_ioid(np) & CBE_IOPTE_IOID_Mask); 894 895 if (iommu_fixed_is_weak) 896 pr_info("IOMMU: Using weak ordering for fixed mapping\n"); 897 else { 898 pr_info("IOMMU: Using strong ordering for fixed mapping\n"); 899 base_pte |= CBE_IOPTE_SO_RW; 900 } 901 902 for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) { 903 /* Don't touch the dynamic region */ 904 ioaddr = uaddr + fbase; 905 if (ioaddr >= dbase && ioaddr < (dbase + dsize)) { 906 pr_debug("iommu: fixed/dynamic overlap, skipping\n"); 907 continue; 908 } 909 910 insert_16M_pte(uaddr, ptab, base_pte); 911 } 912 913 mb(); 914 } 915 916 static int __init cell_iommu_fixed_mapping_init(void) 917 { 918 unsigned long dbase, dsize, fbase, fsize, hbase, hend; 919 struct cbe_iommu *iommu; 920 struct device_node *np; 921 922 /* The fixed mapping is only supported on axon machines */ 923 np = of_find_node_by_name(NULL, "axon"); 924 of_node_put(np); 925 926 if (!np) { 927 pr_debug("iommu: fixed mapping disabled, no axons found\n"); 928 return -1; 929 } 930 931 /* We must have dma-ranges properties for fixed mapping to work */ 932 np = of_find_node_with_property(NULL, "dma-ranges"); 933 of_node_put(np); 934 935 if (!np) { 936 pr_debug("iommu: no dma-ranges found, no fixed mapping\n"); 937 return -1; 938 } 939 940 /* The default setup is to have the fixed mapping sit after the 941 * dynamic region, so find the top of the largest IOMMU window 942 * on any axon, then add the size of RAM and that's our max value. 943 * If that is > 32GB we have to do other shennanigans. 944 */ 945 fbase = 0; 946 for_each_node_by_name(np, "axon") { 947 cell_iommu_get_window(np, &dbase, &dsize); 948 fbase = max(fbase, dbase + dsize); 949 } 950 951 fbase = ALIGN(fbase, 1 << IO_SEGMENT_SHIFT); 952 fsize = memblock_phys_mem_size(); 953 954 if ((fbase + fsize) <= 0x800000000ul) 955 hbase = 0; /* use the device tree window */ 956 else { 957 /* If we're over 32 GB we need to cheat. We can't map all of 958 * RAM with the fixed mapping, and also fit the dynamic 959 * region. So try to place the dynamic region where the hash 960 * table sits, drivers never need to DMA to it, we don't 961 * need a fixed mapping for that area. 962 */ 963 if (!htab_address) { 964 pr_debug("iommu: htab is NULL, on LPAR? Huh?\n"); 965 return -1; 966 } 967 hbase = __pa(htab_address); 968 hend = hbase + htab_size_bytes; 969 970 /* The window must start and end on a segment boundary */ 971 if ((hbase != ALIGN(hbase, 1 << IO_SEGMENT_SHIFT)) || 972 (hend != ALIGN(hend, 1 << IO_SEGMENT_SHIFT))) { 973 pr_debug("iommu: hash window not segment aligned\n"); 974 return -1; 975 } 976 977 /* Check the hash window fits inside the real DMA window */ 978 for_each_node_by_name(np, "axon") { 979 cell_iommu_get_window(np, &dbase, &dsize); 980 981 if (hbase < dbase || (hend > (dbase + dsize))) { 982 pr_debug("iommu: hash window doesn't fit in" 983 "real DMA window\n"); 984 of_node_put(np); 985 return -1; 986 } 987 } 988 989 fbase = 0; 990 } 991 992 /* Setup the dynamic regions */ 993 for_each_node_by_name(np, "axon") { 994 iommu = cell_iommu_alloc(np); 995 BUG_ON(!iommu); 996 997 if (hbase == 0) 998 cell_iommu_get_window(np, &dbase, &dsize); 999 else { 1000 dbase = hbase; 1001 dsize = htab_size_bytes; 1002 } 1003 1004 printk(KERN_DEBUG "iommu: node %d, dynamic window 0x%lx-0x%lx " 1005 "fixed window 0x%lx-0x%lx\n", iommu->nid, dbase, 1006 dbase + dsize, fbase, fbase + fsize); 1007 1008 cell_iommu_setup_stab(iommu, dbase, dsize, fbase, fsize); 1009 iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0, 1010 IOMMU_PAGE_SHIFT_4K); 1011 cell_iommu_setup_fixed_ptab(iommu, np, dbase, dsize, 1012 fbase, fsize); 1013 cell_iommu_enable_hardware(iommu); 1014 cell_iommu_setup_window(iommu, np, dbase, dsize, 0); 1015 } 1016 1017 cell_pci_controller_ops.iommu_bypass_supported = 1018 cell_pci_iommu_bypass_supported; 1019 return 0; 1020 } 1021 1022 static int iommu_fixed_disabled; 1023 1024 static int __init setup_iommu_fixed(char *str) 1025 { 1026 struct device_node *pciep; 1027 1028 if (strcmp(str, "off") == 0) 1029 iommu_fixed_disabled = 1; 1030 1031 /* If we can find a pcie-endpoint in the device tree assume that 1032 * we're on a triblade or a CAB so by default the fixed mapping 1033 * should be set to be weakly ordered; but only if the boot 1034 * option WASN'T set for strong ordering 1035 */ 1036 pciep = of_find_node_by_type(NULL, "pcie-endpoint"); 1037 1038 if (strcmp(str, "weak") == 0 || (pciep && strcmp(str, "strong") != 0)) 1039 iommu_fixed_is_weak = true; 1040 1041 of_node_put(pciep); 1042 1043 return 1; 1044 } 1045 __setup("iommu_fixed=", setup_iommu_fixed); 1046 1047 static int __init cell_iommu_init(void) 1048 { 1049 struct device_node *np; 1050 1051 /* If IOMMU is disabled or we have little enough RAM to not need 1052 * to enable it, we setup a direct mapping. 1053 * 1054 * Note: should we make sure we have the IOMMU actually disabled ? 1055 */ 1056 if (iommu_is_off || 1057 (!iommu_force_on && memblock_end_of_DRAM() <= 0x80000000ull)) 1058 if (cell_iommu_init_disabled() == 0) 1059 goto bail; 1060 1061 /* Setup various callbacks */ 1062 cell_pci_controller_ops.dma_dev_setup = cell_pci_dma_dev_setup; 1063 1064 if (!iommu_fixed_disabled && cell_iommu_fixed_mapping_init() == 0) 1065 goto done; 1066 1067 /* Create an iommu for each /axon node. */ 1068 for_each_node_by_name(np, "axon") { 1069 if (np->parent == NULL || np->parent->parent != NULL) 1070 continue; 1071 cell_iommu_init_one(np, 0); 1072 } 1073 1074 /* Create an iommu for each toplevel /pci-internal node for 1075 * old hardware/firmware 1076 */ 1077 for_each_node_by_name(np, "pci-internal") { 1078 if (np->parent == NULL || np->parent->parent != NULL) 1079 continue; 1080 cell_iommu_init_one(np, SPIDER_DMA_OFFSET); 1081 } 1082 done: 1083 /* Setup default PCI iommu ops */ 1084 set_pci_dma_ops(&dma_iommu_ops); 1085 cell_iommu_enabled = true; 1086 bail: 1087 /* Register callbacks on OF platform device addition/removal 1088 * to handle linking them to the right DMA operations 1089 */ 1090 bus_register_notifier(&platform_bus_type, &cell_of_bus_notifier); 1091 1092 return 0; 1093 } 1094 machine_arch_initcall(cell, cell_iommu_init); 1095