1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * IOMMU implementation for Cell Broadband Processor Architecture 4 * 5 * (C) Copyright IBM Corporation 2006-2008 6 * 7 * Author: Jeremy Kerr <jk@ozlabs.org> 8 */ 9 10 #undef DEBUG 11 12 #include <linux/kernel.h> 13 #include <linux/init.h> 14 #include <linux/interrupt.h> 15 #include <linux/notifier.h> 16 #include <linux/of.h> 17 #include <linux/of_platform.h> 18 #include <linux/slab.h> 19 #include <linux/memblock.h> 20 21 #include <asm/prom.h> 22 #include <asm/iommu.h> 23 #include <asm/machdep.h> 24 #include <asm/pci-bridge.h> 25 #include <asm/udbg.h> 26 #include <asm/firmware.h> 27 #include <asm/cell-regs.h> 28 29 #include "cell.h" 30 #include "interrupt.h" 31 32 /* Define CELL_IOMMU_REAL_UNMAP to actually unmap non-used pages 33 * instead of leaving them mapped to some dummy page. This can be 34 * enabled once the appropriate workarounds for spider bugs have 35 * been enabled 36 */ 37 #define CELL_IOMMU_REAL_UNMAP 38 39 /* Define CELL_IOMMU_STRICT_PROTECTION to enforce protection of 40 * IO PTEs based on the transfer direction. That can be enabled 41 * once spider-net has been fixed to pass the correct direction 42 * to the DMA mapping functions 43 */ 44 #define CELL_IOMMU_STRICT_PROTECTION 45 46 47 #define NR_IOMMUS 2 48 49 /* IOC mmap registers */ 50 #define IOC_Reg_Size 0x2000 51 52 #define IOC_IOPT_CacheInvd 0x908 53 #define IOC_IOPT_CacheInvd_NE_Mask 0xffe0000000000000ul 54 #define IOC_IOPT_CacheInvd_IOPTE_Mask 0x000003fffffffff8ul 55 #define IOC_IOPT_CacheInvd_Busy 0x0000000000000001ul 56 57 #define IOC_IOST_Origin 0x918 58 #define IOC_IOST_Origin_E 0x8000000000000000ul 59 #define IOC_IOST_Origin_HW 0x0000000000000800ul 60 #define IOC_IOST_Origin_HL 0x0000000000000400ul 61 62 #define IOC_IO_ExcpStat 0x920 63 #define IOC_IO_ExcpStat_V 0x8000000000000000ul 64 #define IOC_IO_ExcpStat_SPF_Mask 0x6000000000000000ul 65 #define IOC_IO_ExcpStat_SPF_S 0x6000000000000000ul 66 #define IOC_IO_ExcpStat_SPF_P 0x2000000000000000ul 67 #define IOC_IO_ExcpStat_ADDR_Mask 0x00000007fffff000ul 68 #define IOC_IO_ExcpStat_RW_Mask 0x0000000000000800ul 69 #define IOC_IO_ExcpStat_IOID_Mask 0x00000000000007fful 70 71 #define IOC_IO_ExcpMask 0x928 72 #define IOC_IO_ExcpMask_SFE 0x4000000000000000ul 73 #define IOC_IO_ExcpMask_PFE 0x2000000000000000ul 74 75 #define IOC_IOCmd_Offset 0x1000 76 77 #define IOC_IOCmd_Cfg 0xc00 78 #define IOC_IOCmd_Cfg_TE 0x0000800000000000ul 79 80 81 /* Segment table entries */ 82 #define IOSTE_V 0x8000000000000000ul /* valid */ 83 #define IOSTE_H 0x4000000000000000ul /* cache hint */ 84 #define IOSTE_PT_Base_RPN_Mask 0x3ffffffffffff000ul /* base RPN of IOPT */ 85 #define IOSTE_NPPT_Mask 0x0000000000000fe0ul /* no. pages in IOPT */ 86 #define IOSTE_PS_Mask 0x0000000000000007ul /* page size */ 87 #define IOSTE_PS_4K 0x0000000000000001ul /* - 4kB */ 88 #define IOSTE_PS_64K 0x0000000000000003ul /* - 64kB */ 89 #define IOSTE_PS_1M 0x0000000000000005ul /* - 1MB */ 90 #define IOSTE_PS_16M 0x0000000000000007ul /* - 16MB */ 91 92 93 /* IOMMU sizing */ 94 #define IO_SEGMENT_SHIFT 28 95 #define IO_PAGENO_BITS(shift) (IO_SEGMENT_SHIFT - (shift)) 96 97 /* The high bit needs to be set on every DMA address */ 98 #define SPIDER_DMA_OFFSET 0x80000000ul 99 100 struct iommu_window { 101 struct list_head list; 102 struct cbe_iommu *iommu; 103 unsigned long offset; 104 unsigned long size; 105 unsigned int ioid; 106 struct iommu_table table; 107 }; 108 109 #define NAMESIZE 8 110 struct cbe_iommu { 111 int nid; 112 char name[NAMESIZE]; 113 void __iomem *xlate_regs; 114 void __iomem *cmd_regs; 115 unsigned long *stab; 116 unsigned long *ptab; 117 void *pad_page; 118 struct list_head windows; 119 }; 120 121 /* Static array of iommus, one per node 122 * each contains a list of windows, keyed from dma_window property 123 * - on bus setup, look for a matching window, or create one 124 * - on dev setup, assign iommu_table ptr 125 */ 126 static struct cbe_iommu iommus[NR_IOMMUS]; 127 static int cbe_nr_iommus; 128 129 static void invalidate_tce_cache(struct cbe_iommu *iommu, unsigned long *pte, 130 long n_ptes) 131 { 132 u64 __iomem *reg; 133 u64 val; 134 long n; 135 136 reg = iommu->xlate_regs + IOC_IOPT_CacheInvd; 137 138 while (n_ptes > 0) { 139 /* we can invalidate up to 1 << 11 PTEs at once */ 140 n = min(n_ptes, 1l << 11); 141 val = (((n /*- 1*/) << 53) & IOC_IOPT_CacheInvd_NE_Mask) 142 | (__pa(pte) & IOC_IOPT_CacheInvd_IOPTE_Mask) 143 | IOC_IOPT_CacheInvd_Busy; 144 145 out_be64(reg, val); 146 while (in_be64(reg) & IOC_IOPT_CacheInvd_Busy) 147 ; 148 149 n_ptes -= n; 150 pte += n; 151 } 152 } 153 154 static int tce_build_cell(struct iommu_table *tbl, long index, long npages, 155 unsigned long uaddr, enum dma_data_direction direction, 156 unsigned long attrs) 157 { 158 int i; 159 unsigned long *io_pte, base_pte; 160 struct iommu_window *window = 161 container_of(tbl, struct iommu_window, table); 162 163 /* implementing proper protection causes problems with the spidernet 164 * driver - check mapping directions later, but allow read & write by 165 * default for now.*/ 166 #ifdef CELL_IOMMU_STRICT_PROTECTION 167 /* to avoid referencing a global, we use a trick here to setup the 168 * protection bit. "prot" is setup to be 3 fields of 4 bits appended 169 * together for each of the 3 supported direction values. It is then 170 * shifted left so that the fields matching the desired direction 171 * lands on the appropriate bits, and other bits are masked out. 172 */ 173 const unsigned long prot = 0xc48; 174 base_pte = 175 ((prot << (52 + 4 * direction)) & 176 (CBE_IOPTE_PP_W | CBE_IOPTE_PP_R)) | 177 CBE_IOPTE_M | CBE_IOPTE_SO_RW | 178 (window->ioid & CBE_IOPTE_IOID_Mask); 179 #else 180 base_pte = CBE_IOPTE_PP_W | CBE_IOPTE_PP_R | CBE_IOPTE_M | 181 CBE_IOPTE_SO_RW | (window->ioid & CBE_IOPTE_IOID_Mask); 182 #endif 183 if (unlikely(attrs & DMA_ATTR_WEAK_ORDERING)) 184 base_pte &= ~CBE_IOPTE_SO_RW; 185 186 io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset); 187 188 for (i = 0; i < npages; i++, uaddr += (1 << tbl->it_page_shift)) 189 io_pte[i] = base_pte | (__pa(uaddr) & CBE_IOPTE_RPN_Mask); 190 191 mb(); 192 193 invalidate_tce_cache(window->iommu, io_pte, npages); 194 195 pr_debug("tce_build_cell(index=%lx,n=%lx,dir=%d,base_pte=%lx)\n", 196 index, npages, direction, base_pte); 197 return 0; 198 } 199 200 static void tce_free_cell(struct iommu_table *tbl, long index, long npages) 201 { 202 203 int i; 204 unsigned long *io_pte, pte; 205 struct iommu_window *window = 206 container_of(tbl, struct iommu_window, table); 207 208 pr_debug("tce_free_cell(index=%lx,n=%lx)\n", index, npages); 209 210 #ifdef CELL_IOMMU_REAL_UNMAP 211 pte = 0; 212 #else 213 /* spider bridge does PCI reads after freeing - insert a mapping 214 * to a scratch page instead of an invalid entry */ 215 pte = CBE_IOPTE_PP_R | CBE_IOPTE_M | CBE_IOPTE_SO_RW | 216 __pa(window->iommu->pad_page) | 217 (window->ioid & CBE_IOPTE_IOID_Mask); 218 #endif 219 220 io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset); 221 222 for (i = 0; i < npages; i++) 223 io_pte[i] = pte; 224 225 mb(); 226 227 invalidate_tce_cache(window->iommu, io_pte, npages); 228 } 229 230 static irqreturn_t ioc_interrupt(int irq, void *data) 231 { 232 unsigned long stat, spf; 233 struct cbe_iommu *iommu = data; 234 235 stat = in_be64(iommu->xlate_regs + IOC_IO_ExcpStat); 236 spf = stat & IOC_IO_ExcpStat_SPF_Mask; 237 238 /* Might want to rate limit it */ 239 printk(KERN_ERR "iommu: DMA exception 0x%016lx\n", stat); 240 printk(KERN_ERR " V=%d, SPF=[%c%c], RW=%s, IOID=0x%04x\n", 241 !!(stat & IOC_IO_ExcpStat_V), 242 (spf == IOC_IO_ExcpStat_SPF_S) ? 'S' : ' ', 243 (spf == IOC_IO_ExcpStat_SPF_P) ? 'P' : ' ', 244 (stat & IOC_IO_ExcpStat_RW_Mask) ? "Read" : "Write", 245 (unsigned int)(stat & IOC_IO_ExcpStat_IOID_Mask)); 246 printk(KERN_ERR " page=0x%016lx\n", 247 stat & IOC_IO_ExcpStat_ADDR_Mask); 248 249 /* clear interrupt */ 250 stat &= ~IOC_IO_ExcpStat_V; 251 out_be64(iommu->xlate_regs + IOC_IO_ExcpStat, stat); 252 253 return IRQ_HANDLED; 254 } 255 256 static int cell_iommu_find_ioc(int nid, unsigned long *base) 257 { 258 struct device_node *np; 259 struct resource r; 260 261 *base = 0; 262 263 /* First look for new style /be nodes */ 264 for_each_node_by_name(np, "ioc") { 265 if (of_node_to_nid(np) != nid) 266 continue; 267 if (of_address_to_resource(np, 0, &r)) { 268 printk(KERN_ERR "iommu: can't get address for %pOF\n", 269 np); 270 continue; 271 } 272 *base = r.start; 273 of_node_put(np); 274 return 0; 275 } 276 277 /* Ok, let's try the old way */ 278 for_each_node_by_type(np, "cpu") { 279 const unsigned int *nidp; 280 const unsigned long *tmp; 281 282 nidp = of_get_property(np, "node-id", NULL); 283 if (nidp && *nidp == nid) { 284 tmp = of_get_property(np, "ioc-translation", NULL); 285 if (tmp) { 286 *base = *tmp; 287 of_node_put(np); 288 return 0; 289 } 290 } 291 } 292 293 return -ENODEV; 294 } 295 296 static void cell_iommu_setup_stab(struct cbe_iommu *iommu, 297 unsigned long dbase, unsigned long dsize, 298 unsigned long fbase, unsigned long fsize) 299 { 300 struct page *page; 301 unsigned long segments, stab_size; 302 303 segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT; 304 305 pr_debug("%s: iommu[%d]: segments: %lu\n", 306 __func__, iommu->nid, segments); 307 308 /* set up the segment table */ 309 stab_size = segments * sizeof(unsigned long); 310 page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(stab_size)); 311 BUG_ON(!page); 312 iommu->stab = page_address(page); 313 memset(iommu->stab, 0, stab_size); 314 } 315 316 static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, 317 unsigned long base, unsigned long size, unsigned long gap_base, 318 unsigned long gap_size, unsigned long page_shift) 319 { 320 struct page *page; 321 int i; 322 unsigned long reg, segments, pages_per_segment, ptab_size, 323 n_pte_pages, start_seg, *ptab; 324 325 start_seg = base >> IO_SEGMENT_SHIFT; 326 segments = size >> IO_SEGMENT_SHIFT; 327 pages_per_segment = 1ull << IO_PAGENO_BITS(page_shift); 328 /* PTEs for each segment must start on a 4K boundary */ 329 pages_per_segment = max(pages_per_segment, 330 (1 << 12) / sizeof(unsigned long)); 331 332 ptab_size = segments * pages_per_segment * sizeof(unsigned long); 333 pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __func__, 334 iommu->nid, ptab_size, get_order(ptab_size)); 335 page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size)); 336 BUG_ON(!page); 337 338 ptab = page_address(page); 339 memset(ptab, 0, ptab_size); 340 341 /* number of 4K pages needed for a page table */ 342 n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12; 343 344 pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n", 345 __func__, iommu->nid, iommu->stab, ptab, 346 n_pte_pages); 347 348 /* initialise the STEs */ 349 reg = IOSTE_V | ((n_pte_pages - 1) << 5); 350 351 switch (page_shift) { 352 case 12: reg |= IOSTE_PS_4K; break; 353 case 16: reg |= IOSTE_PS_64K; break; 354 case 20: reg |= IOSTE_PS_1M; break; 355 case 24: reg |= IOSTE_PS_16M; break; 356 default: BUG(); 357 } 358 359 gap_base = gap_base >> IO_SEGMENT_SHIFT; 360 gap_size = gap_size >> IO_SEGMENT_SHIFT; 361 362 pr_debug("Setting up IOMMU stab:\n"); 363 for (i = start_seg; i < (start_seg + segments); i++) { 364 if (i >= gap_base && i < (gap_base + gap_size)) { 365 pr_debug("\toverlap at %d, skipping\n", i); 366 continue; 367 } 368 iommu->stab[i] = reg | (__pa(ptab) + (n_pte_pages << 12) * 369 (i - start_seg)); 370 pr_debug("\t[%d] 0x%016lx\n", i, iommu->stab[i]); 371 } 372 373 return ptab; 374 } 375 376 static void cell_iommu_enable_hardware(struct cbe_iommu *iommu) 377 { 378 int ret; 379 unsigned long reg, xlate_base; 380 unsigned int virq; 381 382 if (cell_iommu_find_ioc(iommu->nid, &xlate_base)) 383 panic("%s: missing IOC register mappings for node %d\n", 384 __func__, iommu->nid); 385 386 iommu->xlate_regs = ioremap(xlate_base, IOC_Reg_Size); 387 iommu->cmd_regs = iommu->xlate_regs + IOC_IOCmd_Offset; 388 389 /* ensure that the STEs have updated */ 390 mb(); 391 392 /* setup interrupts for the iommu. */ 393 reg = in_be64(iommu->xlate_regs + IOC_IO_ExcpStat); 394 out_be64(iommu->xlate_regs + IOC_IO_ExcpStat, 395 reg & ~IOC_IO_ExcpStat_V); 396 out_be64(iommu->xlate_regs + IOC_IO_ExcpMask, 397 IOC_IO_ExcpMask_PFE | IOC_IO_ExcpMask_SFE); 398 399 virq = irq_create_mapping(NULL, 400 IIC_IRQ_IOEX_ATI | (iommu->nid << IIC_IRQ_NODE_SHIFT)); 401 BUG_ON(!virq); 402 403 ret = request_irq(virq, ioc_interrupt, 0, iommu->name, iommu); 404 BUG_ON(ret); 405 406 /* set the IOC segment table origin register (and turn on the iommu) */ 407 reg = IOC_IOST_Origin_E | __pa(iommu->stab) | IOC_IOST_Origin_HW; 408 out_be64(iommu->xlate_regs + IOC_IOST_Origin, reg); 409 in_be64(iommu->xlate_regs + IOC_IOST_Origin); 410 411 /* turn on IO translation */ 412 reg = in_be64(iommu->cmd_regs + IOC_IOCmd_Cfg) | IOC_IOCmd_Cfg_TE; 413 out_be64(iommu->cmd_regs + IOC_IOCmd_Cfg, reg); 414 } 415 416 static void cell_iommu_setup_hardware(struct cbe_iommu *iommu, 417 unsigned long base, unsigned long size) 418 { 419 cell_iommu_setup_stab(iommu, base, size, 0, 0); 420 iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0, 421 IOMMU_PAGE_SHIFT_4K); 422 cell_iommu_enable_hardware(iommu); 423 } 424 425 #if 0/* Unused for now */ 426 static struct iommu_window *find_window(struct cbe_iommu *iommu, 427 unsigned long offset, unsigned long size) 428 { 429 struct iommu_window *window; 430 431 /* todo: check for overlapping (but not equal) windows) */ 432 433 list_for_each_entry(window, &(iommu->windows), list) { 434 if (window->offset == offset && window->size == size) 435 return window; 436 } 437 438 return NULL; 439 } 440 #endif 441 442 static inline u32 cell_iommu_get_ioid(struct device_node *np) 443 { 444 const u32 *ioid; 445 446 ioid = of_get_property(np, "ioid", NULL); 447 if (ioid == NULL) { 448 printk(KERN_WARNING "iommu: missing ioid for %pOF using 0\n", 449 np); 450 return 0; 451 } 452 453 return *ioid; 454 } 455 456 static struct iommu_table_ops cell_iommu_ops = { 457 .set = tce_build_cell, 458 .clear = tce_free_cell 459 }; 460 461 static struct iommu_window * __init 462 cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, 463 unsigned long offset, unsigned long size, 464 unsigned long pte_offset) 465 { 466 struct iommu_window *window; 467 struct page *page; 468 u32 ioid; 469 470 ioid = cell_iommu_get_ioid(np); 471 472 window = kzalloc_node(sizeof(*window), GFP_KERNEL, iommu->nid); 473 BUG_ON(window == NULL); 474 475 window->offset = offset; 476 window->size = size; 477 window->ioid = ioid; 478 window->iommu = iommu; 479 480 window->table.it_blocksize = 16; 481 window->table.it_base = (unsigned long)iommu->ptab; 482 window->table.it_index = iommu->nid; 483 window->table.it_page_shift = IOMMU_PAGE_SHIFT_4K; 484 window->table.it_offset = 485 (offset >> window->table.it_page_shift) + pte_offset; 486 window->table.it_size = size >> window->table.it_page_shift; 487 window->table.it_ops = &cell_iommu_ops; 488 489 iommu_init_table(&window->table, iommu->nid, 0, 0); 490 491 pr_debug("\tioid %d\n", window->ioid); 492 pr_debug("\tblocksize %ld\n", window->table.it_blocksize); 493 pr_debug("\tbase 0x%016lx\n", window->table.it_base); 494 pr_debug("\toffset 0x%lx\n", window->table.it_offset); 495 pr_debug("\tsize %ld\n", window->table.it_size); 496 497 list_add(&window->list, &iommu->windows); 498 499 if (offset != 0) 500 return window; 501 502 /* We need to map and reserve the first IOMMU page since it's used 503 * by the spider workaround. In theory, we only need to do that when 504 * running on spider but it doesn't really matter. 505 * 506 * This code also assumes that we have a window that starts at 0, 507 * which is the case on all spider based blades. 508 */ 509 page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0); 510 BUG_ON(!page); 511 iommu->pad_page = page_address(page); 512 clear_page(iommu->pad_page); 513 514 __set_bit(0, window->table.it_map); 515 tce_build_cell(&window->table, window->table.it_offset, 1, 516 (unsigned long)iommu->pad_page, DMA_TO_DEVICE, 0); 517 518 return window; 519 } 520 521 static struct cbe_iommu *cell_iommu_for_node(int nid) 522 { 523 int i; 524 525 for (i = 0; i < cbe_nr_iommus; i++) 526 if (iommus[i].nid == nid) 527 return &iommus[i]; 528 return NULL; 529 } 530 531 static unsigned long cell_dma_nommu_offset; 532 533 static unsigned long dma_iommu_fixed_base; 534 static bool cell_iommu_enabled; 535 536 /* iommu_fixed_is_weak is set if booted with iommu_fixed=weak */ 537 bool iommu_fixed_is_weak; 538 539 static struct iommu_table *cell_get_iommu_table(struct device *dev) 540 { 541 struct iommu_window *window; 542 struct cbe_iommu *iommu; 543 544 /* Current implementation uses the first window available in that 545 * node's iommu. We -might- do something smarter later though it may 546 * never be necessary 547 */ 548 iommu = cell_iommu_for_node(dev_to_node(dev)); 549 if (iommu == NULL || list_empty(&iommu->windows)) { 550 dev_err(dev, "iommu: missing iommu for %pOF (node %d)\n", 551 dev->of_node, dev_to_node(dev)); 552 return NULL; 553 } 554 window = list_entry(iommu->windows.next, struct iommu_window, list); 555 556 return &window->table; 557 } 558 559 static u64 cell_iommu_get_fixed_address(struct device *dev); 560 561 static void cell_dma_dev_setup(struct device *dev) 562 { 563 if (cell_iommu_enabled) { 564 u64 addr = cell_iommu_get_fixed_address(dev); 565 566 if (addr != OF_BAD_ADDR) 567 dev->archdata.dma_offset = addr + dma_iommu_fixed_base; 568 set_iommu_table_base(dev, cell_get_iommu_table(dev)); 569 } else { 570 dev->archdata.dma_offset = cell_dma_nommu_offset; 571 } 572 } 573 574 static void cell_pci_dma_dev_setup(struct pci_dev *dev) 575 { 576 cell_dma_dev_setup(&dev->dev); 577 } 578 579 static int cell_of_bus_notify(struct notifier_block *nb, unsigned long action, 580 void *data) 581 { 582 struct device *dev = data; 583 584 /* We are only intereted in device addition */ 585 if (action != BUS_NOTIFY_ADD_DEVICE) 586 return 0; 587 588 if (cell_iommu_enabled) 589 dev->dma_ops = &dma_iommu_ops; 590 cell_dma_dev_setup(dev); 591 return 0; 592 } 593 594 static struct notifier_block cell_of_bus_notifier = { 595 .notifier_call = cell_of_bus_notify 596 }; 597 598 static int __init cell_iommu_get_window(struct device_node *np, 599 unsigned long *base, 600 unsigned long *size) 601 { 602 const __be32 *dma_window; 603 unsigned long index; 604 605 /* Use ibm,dma-window if available, else, hard code ! */ 606 dma_window = of_get_property(np, "ibm,dma-window", NULL); 607 if (dma_window == NULL) { 608 *base = 0; 609 *size = 0x80000000u; 610 return -ENODEV; 611 } 612 613 of_parse_dma_window(np, dma_window, &index, base, size); 614 return 0; 615 } 616 617 static struct cbe_iommu * __init cell_iommu_alloc(struct device_node *np) 618 { 619 struct cbe_iommu *iommu; 620 int nid, i; 621 622 /* Get node ID */ 623 nid = of_node_to_nid(np); 624 if (nid < 0) { 625 printk(KERN_ERR "iommu: failed to get node for %pOF\n", 626 np); 627 return NULL; 628 } 629 pr_debug("iommu: setting up iommu for node %d (%pOF)\n", 630 nid, np); 631 632 /* XXX todo: If we can have multiple windows on the same IOMMU, which 633 * isn't the case today, we probably want here to check whether the 634 * iommu for that node is already setup. 635 * However, there might be issue with getting the size right so let's 636 * ignore that for now. We might want to completely get rid of the 637 * multiple window support since the cell iommu supports per-page ioids 638 */ 639 640 if (cbe_nr_iommus >= NR_IOMMUS) { 641 printk(KERN_ERR "iommu: too many IOMMUs detected ! (%pOF)\n", 642 np); 643 return NULL; 644 } 645 646 /* Init base fields */ 647 i = cbe_nr_iommus++; 648 iommu = &iommus[i]; 649 iommu->stab = NULL; 650 iommu->nid = nid; 651 snprintf(iommu->name, sizeof(iommu->name), "iommu%d", i); 652 INIT_LIST_HEAD(&iommu->windows); 653 654 return iommu; 655 } 656 657 static void __init cell_iommu_init_one(struct device_node *np, 658 unsigned long offset) 659 { 660 struct cbe_iommu *iommu; 661 unsigned long base, size; 662 663 iommu = cell_iommu_alloc(np); 664 if (!iommu) 665 return; 666 667 /* Obtain a window for it */ 668 cell_iommu_get_window(np, &base, &size); 669 670 pr_debug("\ttranslating window 0x%lx...0x%lx\n", 671 base, base + size - 1); 672 673 /* Initialize the hardware */ 674 cell_iommu_setup_hardware(iommu, base, size); 675 676 /* Setup the iommu_table */ 677 cell_iommu_setup_window(iommu, np, base, size, 678 offset >> IOMMU_PAGE_SHIFT_4K); 679 } 680 681 static void __init cell_disable_iommus(void) 682 { 683 int node; 684 unsigned long base, val; 685 void __iomem *xregs, *cregs; 686 687 /* Make sure IOC translation is disabled on all nodes */ 688 for_each_online_node(node) { 689 if (cell_iommu_find_ioc(node, &base)) 690 continue; 691 xregs = ioremap(base, IOC_Reg_Size); 692 if (xregs == NULL) 693 continue; 694 cregs = xregs + IOC_IOCmd_Offset; 695 696 pr_debug("iommu: cleaning up iommu on node %d\n", node); 697 698 out_be64(xregs + IOC_IOST_Origin, 0); 699 (void)in_be64(xregs + IOC_IOST_Origin); 700 val = in_be64(cregs + IOC_IOCmd_Cfg); 701 val &= ~IOC_IOCmd_Cfg_TE; 702 out_be64(cregs + IOC_IOCmd_Cfg, val); 703 (void)in_be64(cregs + IOC_IOCmd_Cfg); 704 705 iounmap(xregs); 706 } 707 } 708 709 static int __init cell_iommu_init_disabled(void) 710 { 711 struct device_node *np = NULL; 712 unsigned long base = 0, size; 713 714 /* When no iommu is present, we use direct DMA ops */ 715 716 /* First make sure all IOC translation is turned off */ 717 cell_disable_iommus(); 718 719 /* If we have no Axon, we set up the spider DMA magic offset */ 720 if (of_find_node_by_name(NULL, "axon") == NULL) 721 cell_dma_nommu_offset = SPIDER_DMA_OFFSET; 722 723 /* Now we need to check to see where the memory is mapped 724 * in PCI space. We assume that all busses use the same dma 725 * window which is always the case so far on Cell, thus we 726 * pick up the first pci-internal node we can find and check 727 * the DMA window from there. 728 */ 729 for_each_node_by_name(np, "axon") { 730 if (np->parent == NULL || np->parent->parent != NULL) 731 continue; 732 if (cell_iommu_get_window(np, &base, &size) == 0) 733 break; 734 } 735 if (np == NULL) { 736 for_each_node_by_name(np, "pci-internal") { 737 if (np->parent == NULL || np->parent->parent != NULL) 738 continue; 739 if (cell_iommu_get_window(np, &base, &size) == 0) 740 break; 741 } 742 } 743 of_node_put(np); 744 745 /* If we found a DMA window, we check if it's big enough to enclose 746 * all of physical memory. If not, we force enable IOMMU 747 */ 748 if (np && size < memblock_end_of_DRAM()) { 749 printk(KERN_WARNING "iommu: force-enabled, dma window" 750 " (%ldMB) smaller than total memory (%lldMB)\n", 751 size >> 20, memblock_end_of_DRAM() >> 20); 752 return -ENODEV; 753 } 754 755 cell_dma_nommu_offset += base; 756 757 if (cell_dma_nommu_offset != 0) 758 cell_pci_controller_ops.dma_dev_setup = cell_pci_dma_dev_setup; 759 760 printk("iommu: disabled, direct DMA offset is 0x%lx\n", 761 cell_dma_nommu_offset); 762 763 return 0; 764 } 765 766 /* 767 * Fixed IOMMU mapping support 768 * 769 * This code adds support for setting up a fixed IOMMU mapping on certain 770 * cell machines. For 64-bit devices this avoids the performance overhead of 771 * mapping and unmapping pages at runtime. 32-bit devices are unable to use 772 * the fixed mapping. 773 * 774 * The fixed mapping is established at boot, and maps all of physical memory 775 * 1:1 into device space at some offset. On machines with < 30 GB of memory 776 * we setup the fixed mapping immediately above the normal IOMMU window. 777 * 778 * For example a machine with 4GB of memory would end up with the normal 779 * IOMMU window from 0-2GB and the fixed mapping window from 2GB to 6GB. In 780 * this case a 64-bit device wishing to DMA to 1GB would be told to DMA to 781 * 3GB, plus any offset required by firmware. The firmware offset is encoded 782 * in the "dma-ranges" property. 783 * 784 * On machines with 30GB or more of memory, we are unable to place the fixed 785 * mapping above the normal IOMMU window as we would run out of address space. 786 * Instead we move the normal IOMMU window to coincide with the hash page 787 * table, this region does not need to be part of the fixed mapping as no 788 * device should ever be DMA'ing to it. We then setup the fixed mapping 789 * from 0 to 32GB. 790 */ 791 792 static u64 cell_iommu_get_fixed_address(struct device *dev) 793 { 794 u64 cpu_addr, size, best_size, dev_addr = OF_BAD_ADDR; 795 struct device_node *np; 796 const u32 *ranges = NULL; 797 int i, len, best, naddr, nsize, pna, range_size; 798 799 /* We can be called for platform devices that have no of_node */ 800 np = of_node_get(dev->of_node); 801 if (!np) 802 goto out; 803 804 while (1) { 805 naddr = of_n_addr_cells(np); 806 nsize = of_n_size_cells(np); 807 np = of_get_next_parent(np); 808 if (!np) 809 break; 810 811 ranges = of_get_property(np, "dma-ranges", &len); 812 813 /* Ignore empty ranges, they imply no translation required */ 814 if (ranges && len > 0) 815 break; 816 } 817 818 if (!ranges) { 819 dev_dbg(dev, "iommu: no dma-ranges found\n"); 820 goto out; 821 } 822 823 len /= sizeof(u32); 824 825 pna = of_n_addr_cells(np); 826 range_size = naddr + nsize + pna; 827 828 /* dma-ranges format: 829 * child addr : naddr cells 830 * parent addr : pna cells 831 * size : nsize cells 832 */ 833 for (i = 0, best = -1, best_size = 0; i < len; i += range_size) { 834 cpu_addr = of_translate_dma_address(np, ranges + i + naddr); 835 size = of_read_number(ranges + i + naddr + pna, nsize); 836 837 if (cpu_addr == 0 && size > best_size) { 838 best = i; 839 best_size = size; 840 } 841 } 842 843 if (best >= 0) { 844 dev_addr = of_read_number(ranges + best, naddr); 845 } else 846 dev_dbg(dev, "iommu: no suitable range found!\n"); 847 848 out: 849 of_node_put(np); 850 851 return dev_addr; 852 } 853 854 static bool cell_pci_iommu_bypass_supported(struct pci_dev *pdev, u64 mask) 855 { 856 return mask == DMA_BIT_MASK(64) && 857 cell_iommu_get_fixed_address(&pdev->dev) != OF_BAD_ADDR; 858 } 859 860 static void insert_16M_pte(unsigned long addr, unsigned long *ptab, 861 unsigned long base_pte) 862 { 863 unsigned long segment, offset; 864 865 segment = addr >> IO_SEGMENT_SHIFT; 866 offset = (addr >> 24) - (segment << IO_PAGENO_BITS(24)); 867 ptab = ptab + (segment * (1 << 12) / sizeof(unsigned long)); 868 869 pr_debug("iommu: addr %lx ptab %p segment %lx offset %lx\n", 870 addr, ptab, segment, offset); 871 872 ptab[offset] = base_pte | (__pa(addr) & CBE_IOPTE_RPN_Mask); 873 } 874 875 static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, 876 struct device_node *np, unsigned long dbase, unsigned long dsize, 877 unsigned long fbase, unsigned long fsize) 878 { 879 unsigned long base_pte, uaddr, ioaddr, *ptab; 880 881 ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, 24); 882 883 dma_iommu_fixed_base = fbase; 884 885 pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase); 886 887 base_pte = CBE_IOPTE_PP_W | CBE_IOPTE_PP_R | CBE_IOPTE_M | 888 (cell_iommu_get_ioid(np) & CBE_IOPTE_IOID_Mask); 889 890 if (iommu_fixed_is_weak) 891 pr_info("IOMMU: Using weak ordering for fixed mapping\n"); 892 else { 893 pr_info("IOMMU: Using strong ordering for fixed mapping\n"); 894 base_pte |= CBE_IOPTE_SO_RW; 895 } 896 897 for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) { 898 /* Don't touch the dynamic region */ 899 ioaddr = uaddr + fbase; 900 if (ioaddr >= dbase && ioaddr < (dbase + dsize)) { 901 pr_debug("iommu: fixed/dynamic overlap, skipping\n"); 902 continue; 903 } 904 905 insert_16M_pte(uaddr, ptab, base_pte); 906 } 907 908 mb(); 909 } 910 911 static int __init cell_iommu_fixed_mapping_init(void) 912 { 913 unsigned long dbase, dsize, fbase, fsize, hbase, hend; 914 struct cbe_iommu *iommu; 915 struct device_node *np; 916 917 /* The fixed mapping is only supported on axon machines */ 918 np = of_find_node_by_name(NULL, "axon"); 919 of_node_put(np); 920 921 if (!np) { 922 pr_debug("iommu: fixed mapping disabled, no axons found\n"); 923 return -1; 924 } 925 926 /* We must have dma-ranges properties for fixed mapping to work */ 927 np = of_find_node_with_property(NULL, "dma-ranges"); 928 of_node_put(np); 929 930 if (!np) { 931 pr_debug("iommu: no dma-ranges found, no fixed mapping\n"); 932 return -1; 933 } 934 935 /* The default setup is to have the fixed mapping sit after the 936 * dynamic region, so find the top of the largest IOMMU window 937 * on any axon, then add the size of RAM and that's our max value. 938 * If that is > 32GB we have to do other shennanigans. 939 */ 940 fbase = 0; 941 for_each_node_by_name(np, "axon") { 942 cell_iommu_get_window(np, &dbase, &dsize); 943 fbase = max(fbase, dbase + dsize); 944 } 945 946 fbase = _ALIGN_UP(fbase, 1 << IO_SEGMENT_SHIFT); 947 fsize = memblock_phys_mem_size(); 948 949 if ((fbase + fsize) <= 0x800000000ul) 950 hbase = 0; /* use the device tree window */ 951 else { 952 /* If we're over 32 GB we need to cheat. We can't map all of 953 * RAM with the fixed mapping, and also fit the dynamic 954 * region. So try to place the dynamic region where the hash 955 * table sits, drivers never need to DMA to it, we don't 956 * need a fixed mapping for that area. 957 */ 958 if (!htab_address) { 959 pr_debug("iommu: htab is NULL, on LPAR? Huh?\n"); 960 return -1; 961 } 962 hbase = __pa(htab_address); 963 hend = hbase + htab_size_bytes; 964 965 /* The window must start and end on a segment boundary */ 966 if ((hbase != _ALIGN_UP(hbase, 1 << IO_SEGMENT_SHIFT)) || 967 (hend != _ALIGN_UP(hend, 1 << IO_SEGMENT_SHIFT))) { 968 pr_debug("iommu: hash window not segment aligned\n"); 969 return -1; 970 } 971 972 /* Check the hash window fits inside the real DMA window */ 973 for_each_node_by_name(np, "axon") { 974 cell_iommu_get_window(np, &dbase, &dsize); 975 976 if (hbase < dbase || (hend > (dbase + dsize))) { 977 pr_debug("iommu: hash window doesn't fit in" 978 "real DMA window\n"); 979 return -1; 980 } 981 } 982 983 fbase = 0; 984 } 985 986 /* Setup the dynamic regions */ 987 for_each_node_by_name(np, "axon") { 988 iommu = cell_iommu_alloc(np); 989 BUG_ON(!iommu); 990 991 if (hbase == 0) 992 cell_iommu_get_window(np, &dbase, &dsize); 993 else { 994 dbase = hbase; 995 dsize = htab_size_bytes; 996 } 997 998 printk(KERN_DEBUG "iommu: node %d, dynamic window 0x%lx-0x%lx " 999 "fixed window 0x%lx-0x%lx\n", iommu->nid, dbase, 1000 dbase + dsize, fbase, fbase + fsize); 1001 1002 cell_iommu_setup_stab(iommu, dbase, dsize, fbase, fsize); 1003 iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0, 1004 IOMMU_PAGE_SHIFT_4K); 1005 cell_iommu_setup_fixed_ptab(iommu, np, dbase, dsize, 1006 fbase, fsize); 1007 cell_iommu_enable_hardware(iommu); 1008 cell_iommu_setup_window(iommu, np, dbase, dsize, 0); 1009 } 1010 1011 cell_pci_controller_ops.iommu_bypass_supported = 1012 cell_pci_iommu_bypass_supported; 1013 return 0; 1014 } 1015 1016 static int iommu_fixed_disabled; 1017 1018 static int __init setup_iommu_fixed(char *str) 1019 { 1020 struct device_node *pciep; 1021 1022 if (strcmp(str, "off") == 0) 1023 iommu_fixed_disabled = 1; 1024 1025 /* If we can find a pcie-endpoint in the device tree assume that 1026 * we're on a triblade or a CAB so by default the fixed mapping 1027 * should be set to be weakly ordered; but only if the boot 1028 * option WASN'T set for strong ordering 1029 */ 1030 pciep = of_find_node_by_type(NULL, "pcie-endpoint"); 1031 1032 if (strcmp(str, "weak") == 0 || (pciep && strcmp(str, "strong") != 0)) 1033 iommu_fixed_is_weak = true; 1034 1035 of_node_put(pciep); 1036 1037 return 1; 1038 } 1039 __setup("iommu_fixed=", setup_iommu_fixed); 1040 1041 static int __init cell_iommu_init(void) 1042 { 1043 struct device_node *np; 1044 1045 /* If IOMMU is disabled or we have little enough RAM to not need 1046 * to enable it, we setup a direct mapping. 1047 * 1048 * Note: should we make sure we have the IOMMU actually disabled ? 1049 */ 1050 if (iommu_is_off || 1051 (!iommu_force_on && memblock_end_of_DRAM() <= 0x80000000ull)) 1052 if (cell_iommu_init_disabled() == 0) 1053 goto bail; 1054 1055 /* Setup various callbacks */ 1056 cell_pci_controller_ops.dma_dev_setup = cell_pci_dma_dev_setup; 1057 1058 if (!iommu_fixed_disabled && cell_iommu_fixed_mapping_init() == 0) 1059 goto done; 1060 1061 /* Create an iommu for each /axon node. */ 1062 for_each_node_by_name(np, "axon") { 1063 if (np->parent == NULL || np->parent->parent != NULL) 1064 continue; 1065 cell_iommu_init_one(np, 0); 1066 } 1067 1068 /* Create an iommu for each toplevel /pci-internal node for 1069 * old hardware/firmware 1070 */ 1071 for_each_node_by_name(np, "pci-internal") { 1072 if (np->parent == NULL || np->parent->parent != NULL) 1073 continue; 1074 cell_iommu_init_one(np, SPIDER_DMA_OFFSET); 1075 } 1076 done: 1077 /* Setup default PCI iommu ops */ 1078 set_pci_dma_ops(&dma_iommu_ops); 1079 cell_iommu_enabled = true; 1080 bail: 1081 /* Register callbacks on OF platform device addition/removal 1082 * to handle linking them to the right DMA operations 1083 */ 1084 bus_register_notifier(&platform_bus_type, &cell_of_bus_notifier); 1085 1086 return 0; 1087 } 1088 machine_arch_initcall(cell, cell_iommu_init); 1089