1# SPDX-License-Identifier: GPL-2.0 2menu "Platform support" 3 4source "arch/powerpc/platforms/powernv/Kconfig" 5source "arch/powerpc/platforms/pseries/Kconfig" 6source "arch/powerpc/platforms/chrp/Kconfig" 7source "arch/powerpc/platforms/512x/Kconfig" 8source "arch/powerpc/platforms/52xx/Kconfig" 9source "arch/powerpc/platforms/powermac/Kconfig" 10source "arch/powerpc/platforms/maple/Kconfig" 11source "arch/powerpc/platforms/pasemi/Kconfig" 12source "arch/powerpc/platforms/ps3/Kconfig" 13source "arch/powerpc/platforms/cell/Kconfig" 14source "arch/powerpc/platforms/8xx/Kconfig" 15source "arch/powerpc/platforms/82xx/Kconfig" 16source "arch/powerpc/platforms/83xx/Kconfig" 17source "arch/powerpc/platforms/85xx/Kconfig" 18source "arch/powerpc/platforms/86xx/Kconfig" 19source "arch/powerpc/platforms/embedded6xx/Kconfig" 20source "arch/powerpc/platforms/44x/Kconfig" 21source "arch/powerpc/platforms/40x/Kconfig" 22source "arch/powerpc/platforms/amigaone/Kconfig" 23source "arch/powerpc/platforms/book3s/Kconfig" 24source "arch/powerpc/platforms/microwatt/Kconfig" 25 26config KVM_GUEST 27 bool "KVM Guest support" 28 select EPAPR_PARAVIRT 29 help 30 This option enables various optimizations for running under the KVM 31 hypervisor. Overhead for the kernel when not running inside KVM should 32 be minimal. 33 34 In case of doubt, say Y 35 36config EPAPR_PARAVIRT 37 bool "ePAPR para-virtualization support" 38 help 39 Enables ePAPR para-virtualization support for guests. 40 41 In case of doubt, say Y 42 43config PPC_HASH_MMU_NATIVE 44 bool 45 depends on PPC_BOOK3S 46 help 47 Support for running natively on the hardware, i.e. without 48 a hypervisor. This option is not user-selectable but should 49 be selected by all platforms that need it. 50 51config PPC_OF_BOOT_TRAMPOLINE 52 bool "Support booting from Open Firmware or yaboot" 53 depends on PPC_BOOK3S_32 || PPC64 54 select RELOCATABLE if PPC64 55 default y 56 help 57 Support from booting from Open Firmware or yaboot using an 58 Open Firmware client interface. This enables the kernel to 59 communicate with open firmware to retrieve system information 60 such as the device tree. 61 62 In case of doubt, say Y 63 64config PPC_DT_CPU_FTRS 65 bool "Device-tree based CPU feature discovery & setup" 66 depends on PPC_BOOK3S_64 67 default y 68 help 69 This enables code to use a new device tree binding for describing CPU 70 compatibility and features. Saying Y here will attempt to use the new 71 binding if the firmware provides it. Currently only the skiboot 72 firmware provides this binding. 73 If you're not sure say Y. 74 75config UDBG_RTAS_CONSOLE 76 bool "RTAS based debug console" 77 depends on PPC_RTAS 78 79config PPC_SMP_MUXED_IPI 80 bool 81 help 82 Select this option if your platform supports SMP and your 83 interrupt controller provides less than 4 interrupts to each 84 cpu. This will enable the generic code to multiplex the 4 85 messages on to one ipi. 86 87config IPIC 88 bool 89 90config MPIC 91 bool 92 93config MPIC_TIMER 94 bool "MPIC Global Timer" 95 depends on MPIC && FSL_SOC 96 help 97 The MPIC global timer is a hardware timer inside the 98 Freescale PIC complying with OpenPIC standard. When the 99 specified interval times out, the hardware timer generates 100 an interrupt. The driver currently is only tested on fsl 101 chip, but it can potentially support other global timers 102 complying with the OpenPIC standard. 103 104config FSL_MPIC_TIMER_WAKEUP 105 tristate "Freescale MPIC global timer wakeup driver" 106 depends on FSL_SOC && MPIC_TIMER && PM 107 help 108 The driver provides a way to wake up the system by MPIC 109 timer. 110 e.g. "echo 5 > /sys/devices/system/mpic/timer_wakeup" 111 112config PPC_EPAPR_HV_PIC 113 bool 114 select EPAPR_PARAVIRT 115 116config MPIC_WEIRD 117 bool 118 119config MPIC_MSGR 120 bool "MPIC message register support" 121 depends on MPIC 122 help 123 Enables support for the MPIC message registers. These 124 registers are used for inter-processor communication. 125 126config PPC_I8259 127 bool 128 129config U3_DART 130 bool 131 depends on PPC64 132 133config PPC_RTAS 134 bool 135 136config RTAS_ERROR_LOGGING 137 bool 138 depends on PPC_RTAS 139 140config PPC_RTAS_DAEMON 141 bool 142 depends on PPC_RTAS 143 144config RTAS_PROC 145 bool "Proc interface to RTAS" 146 depends on PPC_RTAS && PROC_FS 147 default y 148 149config RTAS_FLASH 150 tristate "Firmware flash interface" 151 depends on PPC64 && RTAS_PROC 152 153config MMIO_NVRAM 154 bool 155 156config MPIC_U3_HT_IRQS 157 bool 158 159config MPIC_BROKEN_REGREAD 160 bool 161 depends on MPIC 162 help 163 This option enables a MPIC driver workaround for some chips 164 that have a bug that causes some interrupt source information 165 to not read back properly. It is safe to use on other chips as 166 well, but enabling it uses about 8KB of memory to keep copies 167 of the register contents in software. 168 169config EEH 170 bool 171 depends on (PPC_POWERNV || PPC_PSERIES) && PCI 172 default y 173 174config PPC_MPC106 175 bool 176 177config PPC_970_NAP 178 bool 179 180config PPC_P7_NAP 181 bool 182 183config PPC_BOOK3S_IDLE 184 def_bool y 185 depends on (PPC_970_NAP || PPC_P7_NAP) 186 187config PPC_INDIRECT_PIO 188 bool 189 select GENERIC_IOMAP 190 191config PPC_INDIRECT_MMIO 192 bool 193 194config PPC_IO_WORKAROUNDS 195 bool 196 197source "drivers/cpufreq/Kconfig" 198 199menu "CPUIdle driver" 200 201source "drivers/cpuidle/Kconfig" 202 203endmenu 204 205config TAU 206 bool "On-chip CPU temperature sensor support" 207 depends on PPC_BOOK3S_32 208 help 209 G3 and G4 processors have an on-chip temperature sensor called the 210 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die 211 temperature within 2-4 degrees Celsius. This option shows the current 212 on-die temperature in /proc/cpuinfo if the cpu supports it. 213 214 Unfortunately, this sensor is very inaccurate when uncalibrated, so 215 don't assume the cpu temp is actually what /proc/cpuinfo says it is. 216 217config TAU_INT 218 bool "Interrupt driven TAU driver (EXPERIMENTAL)" 219 depends on TAU 220 help 221 The TAU supports an interrupt driven mode which causes an interrupt 222 whenever the temperature goes out of range. This is the fastest way 223 to get notified the temp has exceeded a range. With this option off, 224 a timer is used to re-check the temperature periodically. 225 226 If in doubt, say N here. 227 228config TAU_AVERAGE 229 bool "Average high and low temp" 230 depends on TAU 231 help 232 The TAU hardware can compare the temperature to an upper and lower 233 bound. The default behavior is to show both the upper and lower 234 bound in /proc/cpuinfo. If the range is large, the temperature is 235 either changing a lot, or the TAU hardware is broken (likely on some 236 G4's). If the range is small (around 4 degrees), the temperature is 237 relatively stable. If you say Y here, a single temperature value, 238 halfway between the upper and lower bounds, will be reported in 239 /proc/cpuinfo. 240 241 If in doubt, say N here. 242 243config QE_GPIO 244 bool "QE GPIO support" 245 depends on QUICC_ENGINE 246 select GPIOLIB 247 select OF_GPIO_MM_GPIOCHIP 248 help 249 Say Y here if you're going to use hardware that connects to the 250 QE GPIOs. 251 252config CPM2 253 bool "Enable support for the CPM2 (Communications Processor Module)" 254 depends on (FSL_SOC_BOOKE && PPC32) || 8260 255 select CPM 256 select HAVE_PCI 257 select GPIOLIB 258 select OF_GPIO_MM_GPIOCHIP 259 help 260 The CPM2 (Communications Processor Module) is a coprocessor on 261 embedded CPUs made by Freescale. Selecting this option means that 262 you wish to build a kernel for a machine with a CPM2 coprocessor 263 on it (826x, 827x, 8560). 264 265config FSL_ULI1575 266 bool "ULI1575 PCIe south bridge support" 267 depends on FSL_SOC_BOOKE || PPC_86xx 268 depends on PCI 269 select FSL_PCI 270 select GENERIC_ISA_DMA 271 help 272 Supports for the ULI1575 PCIe south bridge that exists on some 273 Freescale reference boards. The boards all use the ULI in pretty 274 much the same way. 275 276config CPM 277 bool 278 select GENERIC_ALLOCATOR 279 280config OF_RTC 281 bool 282 help 283 Uses information from the OF or flattened device tree to instantiate 284 platform devices for direct mapped RTC chips like the DS1742 or DS1743. 285 286config GEN_RTC 287 bool "Use the platform RTC operations from user space" 288 select RTC_CLASS 289 select RTC_DRV_GENERIC 290 help 291 This option provides backwards compatibility with the old gen_rtc.ko 292 module that was traditionally used for old PowerPC machines. 293 Platforms should migrate to enabling the RTC_DRV_GENERIC by hand 294 replacing their get_rtc_time/set_rtc_time callbacks with 295 a proper RTC device driver. 296 297config MCU_MPC8349EMITX 298 bool "MPC8349E-mITX MCU driver" 299 depends on I2C=y && PPC_83xx 300 select GPIOLIB 301 help 302 Say Y here to enable soft power-off functionality on the Freescale 303 boards with the MPC8349E-mITX-compatible MCU chips. This driver will 304 also register MCU GPIOs with the generic GPIO API, so you'll able 305 to use MCU pins as GPIOs. 306 307endmenu 308