1# SPDX-License-Identifier: GPL-2.0 2menu "Platform support" 3 4source "arch/powerpc/platforms/powernv/Kconfig" 5source "arch/powerpc/platforms/pseries/Kconfig" 6source "arch/powerpc/platforms/chrp/Kconfig" 7source "arch/powerpc/platforms/512x/Kconfig" 8source "arch/powerpc/platforms/52xx/Kconfig" 9source "arch/powerpc/platforms/powermac/Kconfig" 10source "arch/powerpc/platforms/maple/Kconfig" 11source "arch/powerpc/platforms/pasemi/Kconfig" 12source "arch/powerpc/platforms/ps3/Kconfig" 13source "arch/powerpc/platforms/cell/Kconfig" 14source "arch/powerpc/platforms/8xx/Kconfig" 15source "arch/powerpc/platforms/82xx/Kconfig" 16source "arch/powerpc/platforms/83xx/Kconfig" 17source "arch/powerpc/platforms/85xx/Kconfig" 18source "arch/powerpc/platforms/86xx/Kconfig" 19source "arch/powerpc/platforms/embedded6xx/Kconfig" 20source "arch/powerpc/platforms/44x/Kconfig" 21source "arch/powerpc/platforms/40x/Kconfig" 22source "arch/powerpc/platforms/amigaone/Kconfig" 23 24config KVM_GUEST 25 bool "KVM Guest support" 26 select EPAPR_PARAVIRT 27 ---help--- 28 This option enables various optimizations for running under the KVM 29 hypervisor. Overhead for the kernel when not running inside KVM should 30 be minimal. 31 32 In case of doubt, say Y 33 34config EPAPR_PARAVIRT 35 bool "ePAPR para-virtualization support" 36 help 37 Enables ePAPR para-virtualization support for guests. 38 39 In case of doubt, say Y 40 41config PPC_NATIVE 42 bool 43 depends on PPC_BOOK3S_32 || PPC64 44 help 45 Support for running natively on the hardware, i.e. without 46 a hypervisor. This option is not user-selectable but should 47 be selected by all platforms that need it. 48 49config PPC_OF_BOOT_TRAMPOLINE 50 bool "Support booting from Open Firmware or yaboot" 51 depends on PPC_BOOK3S_32 || PPC64 52 default y 53 help 54 Support from booting from Open Firmware or yaboot using an 55 Open Firmware client interface. This enables the kernel to 56 communicate with open firmware to retrieve system information 57 such as the device tree. 58 59 In case of doubt, say Y 60 61config PPC_DT_CPU_FTRS 62 bool "Device-tree based CPU feature discovery & setup" 63 depends on PPC_BOOK3S_64 64 default y 65 help 66 This enables code to use a new device tree binding for describing CPU 67 compatibility and features. Saying Y here will attempt to use the new 68 binding if the firmware provides it. Currently only the skiboot 69 firmware provides this binding. 70 If you're not sure say Y. 71 72config UDBG_RTAS_CONSOLE 73 bool "RTAS based debug console" 74 depends on PPC_RTAS 75 76config PPC_SMP_MUXED_IPI 77 bool 78 help 79 Select this option if your platform supports SMP and your 80 interrupt controller provides less than 4 interrupts to each 81 cpu. This will enable the generic code to multiplex the 4 82 messages on to one ipi. 83 84config IPIC 85 bool 86 87config MPIC 88 bool 89 90config MPIC_TIMER 91 bool "MPIC Global Timer" 92 depends on MPIC && FSL_SOC 93 help 94 The MPIC global timer is a hardware timer inside the 95 Freescale PIC complying with OpenPIC standard. When the 96 specified interval times out, the hardware timer generates 97 an interrupt. The driver currently is only tested on fsl 98 chip, but it can potentially support other global timers 99 complying with the OpenPIC standard. 100 101config FSL_MPIC_TIMER_WAKEUP 102 tristate "Freescale MPIC global timer wakeup driver" 103 depends on FSL_SOC && MPIC_TIMER && PM 104 help 105 The driver provides a way to wake up the system by MPIC 106 timer. 107 e.g. "echo 5 > /sys/devices/system/mpic/timer_wakeup" 108 109config PPC_EPAPR_HV_PIC 110 bool 111 select EPAPR_PARAVIRT 112 113config MPIC_WEIRD 114 bool 115 116config MPIC_MSGR 117 bool "MPIC message register support" 118 depends on MPIC 119 help 120 Enables support for the MPIC message registers. These 121 registers are used for inter-processor communication. 122 123config PPC_I8259 124 bool 125 126config U3_DART 127 bool 128 depends on PPC64 129 130config PPC_RTAS 131 bool 132 133config RTAS_ERROR_LOGGING 134 bool 135 depends on PPC_RTAS 136 137config PPC_RTAS_DAEMON 138 bool 139 depends on PPC_RTAS 140 141config RTAS_PROC 142 bool "Proc interface to RTAS" 143 depends on PPC_RTAS && PROC_FS 144 default y 145 146config RTAS_FLASH 147 tristate "Firmware flash interface" 148 depends on PPC64 && RTAS_PROC 149 150config MMIO_NVRAM 151 bool 152 153config MPIC_U3_HT_IRQS 154 bool 155 156config MPIC_BROKEN_REGREAD 157 bool 158 depends on MPIC 159 help 160 This option enables a MPIC driver workaround for some chips 161 that have a bug that causes some interrupt source information 162 to not read back properly. It is safe to use on other chips as 163 well, but enabling it uses about 8KB of memory to keep copies 164 of the register contents in software. 165 166config EEH 167 bool 168 depends on (PPC_POWERNV || PPC_PSERIES) && PCI 169 default y 170 171config PPC_MPC106 172 bool 173 174config PPC_970_NAP 175 bool 176 177config PPC_P7_NAP 178 bool 179 180config PPC_INDIRECT_PIO 181 bool 182 select GENERIC_IOMAP 183 184config PPC_INDIRECT_MMIO 185 bool 186 187config PPC_IO_WORKAROUNDS 188 bool 189 190source "drivers/cpufreq/Kconfig" 191 192menu "CPUIdle driver" 193 194source "drivers/cpuidle/Kconfig" 195 196endmenu 197 198config PPC601_SYNC_FIX 199 bool "Workarounds for PPC601 bugs" 200 depends on PPC_BOOK3S_601 && PPC_PMAC 201 default y 202 help 203 Some versions of the PPC601 (the first PowerPC chip) have bugs which 204 mean that extra synchronization instructions are required near 205 certain instructions, typically those that make major changes to the 206 CPU state. These extra instructions reduce performance slightly. 207 If you say N here, these extra instructions will not be included, 208 resulting in a kernel which will run faster but may not run at all 209 on some systems with the PPC601 chip. 210 211 If in doubt, say Y here. 212 213config TAU 214 bool "On-chip CPU temperature sensor support" 215 depends on PPC_BOOK3S_32 216 help 217 G3 and G4 processors have an on-chip temperature sensor called the 218 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die 219 temperature within 2-4 degrees Celsius. This option shows the current 220 on-die temperature in /proc/cpuinfo if the cpu supports it. 221 222 Unfortunately, on some chip revisions, this sensor is very inaccurate 223 and in many cases, does not work at all, so don't assume the cpu 224 temp is actually what /proc/cpuinfo says it is. 225 226config TAU_INT 227 bool "Interrupt driven TAU driver (DANGEROUS)" 228 depends on TAU 229 ---help--- 230 The TAU supports an interrupt driven mode which causes an interrupt 231 whenever the temperature goes out of range. This is the fastest way 232 to get notified the temp has exceeded a range. With this option off, 233 a timer is used to re-check the temperature periodically. 234 235 However, on some cpus it appears that the TAU interrupt hardware 236 is buggy and can cause a situation which would lead unexplained hard 237 lockups. 238 239 Unless you are extending the TAU driver, or enjoy kernel/hardware 240 debugging, leave this option off. 241 242config TAU_AVERAGE 243 bool "Average high and low temp" 244 depends on TAU 245 ---help--- 246 The TAU hardware can compare the temperature to an upper and lower 247 bound. The default behavior is to show both the upper and lower 248 bound in /proc/cpuinfo. If the range is large, the temperature is 249 either changing a lot, or the TAU hardware is broken (likely on some 250 G4's). If the range is small (around 4 degrees), the temperature is 251 relatively stable. If you say Y here, a single temperature value, 252 halfway between the upper and lower bounds, will be reported in 253 /proc/cpuinfo. 254 255 If in doubt, say N here. 256 257config QE_GPIO 258 bool "QE GPIO support" 259 depends on QUICC_ENGINE 260 select GPIOLIB 261 help 262 Say Y here if you're going to use hardware that connects to the 263 QE GPIOs. 264 265config CPM2 266 bool "Enable support for the CPM2 (Communications Processor Module)" 267 depends on (FSL_SOC_BOOKE && PPC32) || 8260 268 select CPM 269 select HAVE_PCI 270 select GPIOLIB 271 help 272 The CPM2 (Communications Processor Module) is a coprocessor on 273 embedded CPUs made by Freescale. Selecting this option means that 274 you wish to build a kernel for a machine with a CPM2 coprocessor 275 on it (826x, 827x, 8560). 276 277config FSL_ULI1575 278 bool 279 select GENERIC_ISA_DMA 280 help 281 Supports for the ULI1575 PCIe south bridge that exists on some 282 Freescale reference boards. The boards all use the ULI in pretty 283 much the same way. 284 285config CPM 286 bool 287 select GENERIC_ALLOCATOR 288 289config OF_RTC 290 bool 291 help 292 Uses information from the OF or flattened device tree to instantiate 293 platform devices for direct mapped RTC chips like the DS1742 or DS1743. 294 295config GEN_RTC 296 bool "Use the platform RTC operations from user space" 297 select RTC_CLASS 298 select RTC_DRV_GENERIC 299 help 300 This option provides backwards compatibility with the old gen_rtc.ko 301 module that was traditionally used for old PowerPC machines. 302 Platforms should migrate to enabling the RTC_DRV_GENERIC by hand 303 replacing their get_rtc_time/set_rtc_time callbacks with 304 a proper RTC device driver. 305 306config MCU_MPC8349EMITX 307 bool "MPC8349E-mITX MCU driver" 308 depends on I2C=y && PPC_83xx 309 select GPIOLIB 310 help 311 Say Y here to enable soft power-off functionality on the Freescale 312 boards with the MPC8349E-mITX-compatible MCU chips. This driver will 313 also register MCU GPIOs with the generic GPIO API, so you'll able 314 to use MCU pins as GPIOs. 315 316config XILINX_PCI 317 bool "Xilinx PCI host bridge support" 318 depends on PCI && XILINX_VIRTEX 319 320endmenu 321