xref: /openbmc/linux/arch/powerpc/platforms/Kconfig (revision 11a163f2) 
1# SPDX-License-Identifier: GPL-2.0
2menu "Platform support"
3
4source "arch/powerpc/platforms/powernv/Kconfig"
5source "arch/powerpc/platforms/pseries/Kconfig"
6source "arch/powerpc/platforms/chrp/Kconfig"
7source "arch/powerpc/platforms/512x/Kconfig"
8source "arch/powerpc/platforms/52xx/Kconfig"
9source "arch/powerpc/platforms/powermac/Kconfig"
10source "arch/powerpc/platforms/maple/Kconfig"
11source "arch/powerpc/platforms/pasemi/Kconfig"
12source "arch/powerpc/platforms/ps3/Kconfig"
13source "arch/powerpc/platforms/cell/Kconfig"
14source "arch/powerpc/platforms/8xx/Kconfig"
15source "arch/powerpc/platforms/82xx/Kconfig"
16source "arch/powerpc/platforms/83xx/Kconfig"
17source "arch/powerpc/platforms/85xx/Kconfig"
18source "arch/powerpc/platforms/86xx/Kconfig"
19source "arch/powerpc/platforms/embedded6xx/Kconfig"
20source "arch/powerpc/platforms/44x/Kconfig"
21source "arch/powerpc/platforms/40x/Kconfig"
22source "arch/powerpc/platforms/amigaone/Kconfig"
23
24config KVM_GUEST
25	bool "KVM Guest support"
26	select EPAPR_PARAVIRT
27	help
28	  This option enables various optimizations for running under the KVM
29	  hypervisor. Overhead for the kernel when not running inside KVM should
30	  be minimal.
31
32	  In case of doubt, say Y
33
34config EPAPR_PARAVIRT
35	bool "ePAPR para-virtualization support"
36	help
37	  Enables ePAPR para-virtualization support for guests.
38
39	  In case of doubt, say Y
40
41config PPC_NATIVE
42	bool
43	depends on PPC_BOOK3S_32 || PPC64
44	help
45	  Support for running natively on the hardware, i.e. without
46	  a hypervisor. This option is not user-selectable but should
47	  be selected by all platforms that need it.
48
49config PPC_OF_BOOT_TRAMPOLINE
50	bool "Support booting from Open Firmware or yaboot"
51	depends on PPC_BOOK3S_32 || PPC64
52	default y
53	help
54	  Support from booting from Open Firmware or yaboot using an
55	  Open Firmware client interface. This enables the kernel to
56	  communicate with open firmware to retrieve system information
57	  such as the device tree.
58
59	  In case of doubt, say Y
60
61config PPC_DT_CPU_FTRS
62	bool "Device-tree based CPU feature discovery & setup"
63	depends on PPC_BOOK3S_64
64	default y
65	help
66	  This enables code to use a new device tree binding for describing CPU
67	  compatibility and features. Saying Y here will attempt to use the new
68	  binding if the firmware provides it. Currently only the skiboot
69	  firmware provides this binding.
70	  If you're not sure say Y.
71
72config UDBG_RTAS_CONSOLE
73	bool "RTAS based debug console"
74	depends on PPC_RTAS
75
76config PPC_SMP_MUXED_IPI
77	bool
78	help
79	  Select this option if your platform supports SMP and your
80	  interrupt controller provides less than 4 interrupts to each
81	  cpu.	This will enable the generic code to multiplex the 4
82	  messages on to one ipi.
83
84config IPIC
85	bool
86
87config MPIC
88	bool
89
90config MPIC_TIMER
91	bool "MPIC Global Timer"
92	depends on MPIC && FSL_SOC
93	help
94	  The MPIC global timer is a hardware timer inside the
95	  Freescale PIC complying with OpenPIC standard. When the
96	  specified interval times out, the hardware timer generates
97	  an interrupt. The driver currently is only tested on fsl
98	  chip, but it can potentially support other global timers
99	  complying with the OpenPIC standard.
100
101config FSL_MPIC_TIMER_WAKEUP
102	tristate "Freescale MPIC global timer wakeup driver"
103	depends on FSL_SOC &&  MPIC_TIMER && PM
104	help
105	  The driver provides a way to wake up the system by MPIC
106	  timer.
107	  e.g. "echo 5 > /sys/devices/system/mpic/timer_wakeup"
108
109config PPC_EPAPR_HV_PIC
110	bool
111	select EPAPR_PARAVIRT
112
113config MPIC_WEIRD
114	bool
115
116config MPIC_MSGR
117	bool "MPIC message register support"
118	depends on MPIC
119	help
120	  Enables support for the MPIC message registers.  These
121	  registers are used for inter-processor communication.
122
123config PPC_I8259
124	bool
125
126config U3_DART
127	bool
128	depends on PPC64
129
130config PPC_RTAS
131	bool
132
133config RTAS_ERROR_LOGGING
134	bool
135	depends on PPC_RTAS
136
137config PPC_RTAS_DAEMON
138	bool
139	depends on PPC_RTAS
140
141config RTAS_PROC
142	bool "Proc interface to RTAS"
143	depends on PPC_RTAS && PROC_FS
144	default y
145
146config RTAS_FLASH
147	tristate "Firmware flash interface"
148	depends on PPC64 && RTAS_PROC
149
150config MMIO_NVRAM
151	bool
152
153config MPIC_U3_HT_IRQS
154	bool
155
156config MPIC_BROKEN_REGREAD
157	bool
158	depends on MPIC
159	help
160	  This option enables a MPIC driver workaround for some chips
161	  that have a bug that causes some interrupt source information
162	  to not read back properly. It is safe to use on other chips as
163	  well, but enabling it uses about 8KB of memory to keep copies
164	  of the register contents in software.
165
166config EEH
167	bool
168	depends on (PPC_POWERNV || PPC_PSERIES) && PCI
169	default y
170
171config PPC_MPC106
172	bool
173
174config PPC_970_NAP
175	bool
176
177config PPC_P7_NAP
178	bool
179
180config PPC_BOOK3S_IDLE
181	def_bool y
182	depends on (PPC_970_NAP || PPC_P7_NAP)
183
184config PPC_INDIRECT_PIO
185	bool
186	select GENERIC_IOMAP
187
188config PPC_INDIRECT_MMIO
189	bool
190
191config PPC_IO_WORKAROUNDS
192	bool
193
194source "drivers/cpufreq/Kconfig"
195
196menu "CPUIdle driver"
197
198source "drivers/cpuidle/Kconfig"
199
200endmenu
201
202config TAU
203	bool "On-chip CPU temperature sensor support"
204	depends on PPC_BOOK3S_32
205	help
206	  G3 and G4 processors have an on-chip temperature sensor called the
207	  'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
208	  temperature within 2-4 degrees Celsius. This option shows the current
209	  on-die temperature in /proc/cpuinfo if the cpu supports it.
210
211	  Unfortunately, this sensor is very inaccurate when uncalibrated, so
212	  don't assume the cpu temp is actually what /proc/cpuinfo says it is.
213
214config TAU_INT
215	bool "Interrupt driven TAU driver (EXPERIMENTAL)"
216	depends on TAU
217	help
218	  The TAU supports an interrupt driven mode which causes an interrupt
219	  whenever the temperature goes out of range. This is the fastest way
220	  to get notified the temp has exceeded a range. With this option off,
221	  a timer is used to re-check the temperature periodically.
222
223	  If in doubt, say N here.
224
225config TAU_AVERAGE
226	bool "Average high and low temp"
227	depends on TAU
228	help
229	  The TAU hardware can compare the temperature to an upper and lower
230	  bound.  The default behavior is to show both the upper and lower
231	  bound in /proc/cpuinfo. If the range is large, the temperature is
232	  either changing a lot, or the TAU hardware is broken (likely on some
233	  G4's). If the range is small (around 4 degrees), the temperature is
234	  relatively stable.  If you say Y here, a single temperature value,
235	  halfway between the upper and lower bounds, will be reported in
236	  /proc/cpuinfo.
237
238	  If in doubt, say N here.
239
240config QE_GPIO
241	bool "QE GPIO support"
242	depends on QUICC_ENGINE
243	select GPIOLIB
244	help
245	  Say Y here if you're going to use hardware that connects to the
246	  QE GPIOs.
247
248config CPM2
249	bool "Enable support for the CPM2 (Communications Processor Module)"
250	depends on (FSL_SOC_BOOKE && PPC32) || 8260
251	select CPM
252	select HAVE_PCI
253	select GPIOLIB
254	help
255	  The CPM2 (Communications Processor Module) is a coprocessor on
256	  embedded CPUs made by Freescale.  Selecting this option means that
257	  you wish to build a kernel for a machine with a CPM2 coprocessor
258	  on it (826x, 827x, 8560).
259
260config FSL_ULI1575
261	bool
262	select GENERIC_ISA_DMA
263	help
264	  Supports for the ULI1575 PCIe south bridge that exists on some
265	  Freescale reference boards. The boards all use the ULI in pretty
266	  much the same way.
267
268config CPM
269	bool
270	select GENERIC_ALLOCATOR
271
272config OF_RTC
273	bool
274	help
275	  Uses information from the OF or flattened device tree to instantiate
276	  platform devices for direct mapped RTC chips like the DS1742 or DS1743.
277
278config GEN_RTC
279	bool "Use the platform RTC operations from user space"
280	select RTC_CLASS
281	select RTC_DRV_GENERIC
282	help
283	  This option provides backwards compatibility with the old gen_rtc.ko
284	  module that was traditionally used for old PowerPC machines.
285	  Platforms should migrate to enabling the RTC_DRV_GENERIC by hand
286	  replacing their get_rtc_time/set_rtc_time callbacks with
287	  a proper RTC device driver.
288
289config MCU_MPC8349EMITX
290	bool "MPC8349E-mITX MCU driver"
291	depends on I2C=y && PPC_83xx
292	select GPIOLIB
293	help
294	  Say Y here to enable soft power-off functionality on the Freescale
295	  boards with the MPC8349E-mITX-compatible MCU chips. This driver will
296	  also register MCU GPIOs with the generic GPIO API, so you'll able
297	  to use MCU pins as GPIOs.
298
299endmenu
300