1 /*
2  * Platform setup for the Freescale mpc885ads board
3  *
4  * Vitaly Bordug <vbordug@ru.mvista.com>
5  *
6  * Copyright 2005 MontaVista Software Inc.
7  *
8  * Heavily modified by Scott Wood <scottwood@freescale.com>
9  * Copyright 2007 Freescale Semiconductor, Inc.
10  *
11  * This file is licensed under the terms of the GNU General Public License
12  * version 2. This program is licensed "as is" without any warranty of any
13  * kind, whether express or implied.
14  */
15 
16 #include <linux/init.h>
17 #include <linux/module.h>
18 #include <linux/param.h>
19 #include <linux/string.h>
20 #include <linux/ioport.h>
21 #include <linux/device.h>
22 #include <linux/delay.h>
23 
24 #include <linux/fs_enet_pd.h>
25 #include <linux/fs_uart_pd.h>
26 #include <linux/fsl_devices.h>
27 #include <linux/mii.h>
28 #include <linux/of_address.h>
29 #include <linux/of_fdt.h>
30 #include <linux/of_platform.h>
31 
32 #include <asm/delay.h>
33 #include <asm/io.h>
34 #include <asm/machdep.h>
35 #include <asm/page.h>
36 #include <asm/processor.h>
37 #include <asm/time.h>
38 #include <asm/8xx_immap.h>
39 #include <asm/cpm1.h>
40 #include <asm/fs_pd.h>
41 #include <asm/udbg.h>
42 
43 #include "mpc885ads.h"
44 #include "mpc8xx.h"
45 
46 static u32 __iomem *bcsr, *bcsr5;
47 
48 struct cpm_pin {
49 	int port, pin, flags;
50 };
51 
52 static struct cpm_pin mpc885ads_pins[] = {
53 	/* SMC1 */
54 	{CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
55 	{CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
56 
57 	/* SMC2 */
58 #ifndef CONFIG_MPC8xx_SECOND_ETH_FEC2
59 	{CPM_PORTE, 21, CPM_PIN_INPUT}, /* RX */
60 	{CPM_PORTE, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
61 #endif
62 
63 	/* SCC3 */
64 	{CPM_PORTA, 9, CPM_PIN_INPUT}, /* RX */
65 	{CPM_PORTA, 8, CPM_PIN_INPUT}, /* TX */
66 	{CPM_PORTC, 4, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */
67 	{CPM_PORTC, 5, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */
68 	{CPM_PORTE, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */
69 	{CPM_PORTE, 17, CPM_PIN_INPUT}, /* CLK5 */
70 	{CPM_PORTE, 16, CPM_PIN_INPUT}, /* CLK6 */
71 
72 	/* MII1 */
73 	{CPM_PORTA, 0, CPM_PIN_INPUT},
74 	{CPM_PORTA, 1, CPM_PIN_INPUT},
75 	{CPM_PORTA, 2, CPM_PIN_INPUT},
76 	{CPM_PORTA, 3, CPM_PIN_INPUT},
77 	{CPM_PORTA, 4, CPM_PIN_OUTPUT},
78 	{CPM_PORTA, 10, CPM_PIN_OUTPUT},
79 	{CPM_PORTA, 11, CPM_PIN_OUTPUT},
80 	{CPM_PORTB, 19, CPM_PIN_INPUT},
81 	{CPM_PORTB, 31, CPM_PIN_INPUT},
82 	{CPM_PORTC, 12, CPM_PIN_INPUT},
83 	{CPM_PORTC, 13, CPM_PIN_INPUT},
84 	{CPM_PORTE, 30, CPM_PIN_OUTPUT},
85 	{CPM_PORTE, 31, CPM_PIN_OUTPUT},
86 
87 	/* MII2 */
88 #ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
89 	{CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
90 	{CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
91 	{CPM_PORTE, 16, CPM_PIN_OUTPUT},
92 	{CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
93 	{CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
94 	{CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
95 	{CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
96 	{CPM_PORTE, 21, CPM_PIN_OUTPUT},
97 	{CPM_PORTE, 22, CPM_PIN_OUTPUT},
98 	{CPM_PORTE, 23, CPM_PIN_OUTPUT},
99 	{CPM_PORTE, 24, CPM_PIN_OUTPUT},
100 	{CPM_PORTE, 25, CPM_PIN_OUTPUT},
101 	{CPM_PORTE, 26, CPM_PIN_OUTPUT},
102 	{CPM_PORTE, 27, CPM_PIN_OUTPUT},
103 	{CPM_PORTE, 28, CPM_PIN_OUTPUT},
104 	{CPM_PORTE, 29, CPM_PIN_OUTPUT},
105 #endif
106 	/* I2C */
107 	{CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
108 	{CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
109 };
110 
111 static void __init init_ioports(void)
112 {
113 	int i;
114 
115 	for (i = 0; i < ARRAY_SIZE(mpc885ads_pins); i++) {
116 		struct cpm_pin *pin = &mpc885ads_pins[i];
117 		cpm1_set_pin(pin->port, pin->pin, pin->flags);
118 	}
119 
120 	cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
121 	cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX);
122 	cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_TX);
123 	cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK6, CPM_CLK_RX);
124 
125 	/* Set FEC1 and FEC2 to MII mode */
126 	clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
127 }
128 
129 static void __init mpc885ads_setup_arch(void)
130 {
131 	struct device_node *np;
132 
133 	cpm_reset();
134 	init_ioports();
135 
136 	np = of_find_compatible_node(NULL, NULL, "fsl,mpc885ads-bcsr");
137 	if (!np) {
138 		printk(KERN_CRIT "Could not find fsl,mpc885ads-bcsr node\n");
139 		return;
140 	}
141 
142 	bcsr = of_iomap(np, 0);
143 	bcsr5 = of_iomap(np, 1);
144 	of_node_put(np);
145 
146 	if (!bcsr || !bcsr5) {
147 		printk(KERN_CRIT "Could not remap BCSR\n");
148 		return;
149 	}
150 
151 	clrbits32(&bcsr[1], BCSR1_RS232EN_1);
152 #ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
153 	setbits32(&bcsr[1], BCSR1_RS232EN_2);
154 #else
155 	clrbits32(&bcsr[1], BCSR1_RS232EN_2);
156 #endif
157 
158 	clrbits32(bcsr5, BCSR5_MII1_EN);
159 	setbits32(bcsr5, BCSR5_MII1_RST);
160 	udelay(1000);
161 	clrbits32(bcsr5, BCSR5_MII1_RST);
162 
163 #ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
164 	clrbits32(bcsr5, BCSR5_MII2_EN);
165 	setbits32(bcsr5, BCSR5_MII2_RST);
166 	udelay(1000);
167 	clrbits32(bcsr5, BCSR5_MII2_RST);
168 #else
169 	setbits32(bcsr5, BCSR5_MII2_EN);
170 #endif
171 
172 #ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
173 	clrbits32(&bcsr[4], BCSR4_ETH10_RST);
174 	udelay(1000);
175 	setbits32(&bcsr[4], BCSR4_ETH10_RST);
176 
177 	setbits32(&bcsr[1], BCSR1_ETHEN);
178 
179 	np = of_find_node_by_path("/soc@ff000000/cpm@9c0/serial@a80");
180 #else
181 	np = of_find_node_by_path("/soc@ff000000/cpm@9c0/ethernet@a40");
182 #endif
183 
184 	/* The SCC3 enet registers overlap the SMC1 registers, so
185 	 * one of the two must be removed from the device tree.
186 	 */
187 
188 	if (np) {
189 		of_detach_node(np);
190 		of_node_put(np);
191 	}
192 }
193 
194 static int __init mpc885ads_probe(void)
195 {
196 	unsigned long root = of_get_flat_dt_root();
197 	return of_flat_dt_is_compatible(root, "fsl,mpc885ads");
198 }
199 
200 static const struct of_device_id of_bus_ids[] __initconst = {
201 	{ .name = "soc", },
202 	{ .name = "cpm", },
203 	{ .name = "localbus", },
204 	{},
205 };
206 
207 static int __init declare_of_platform_devices(void)
208 {
209 	/* Publish the QE devices */
210 	of_platform_bus_probe(NULL, of_bus_ids, NULL);
211 
212 	return 0;
213 }
214 machine_device_initcall(mpc885_ads, declare_of_platform_devices);
215 
216 define_machine(mpc885_ads) {
217 	.name			= "Freescale MPC885 ADS",
218 	.probe			= mpc885ads_probe,
219 	.setup_arch		= mpc885ads_setup_arch,
220 	.init_IRQ		= mpc8xx_pics_init,
221 	.get_irq		= mpc8xx_get_irq,
222 	.restart		= mpc8xx_restart,
223 	.calibrate_decr		= mpc8xx_calibrate_decr,
224 	.set_rtc_time		= mpc8xx_set_rtc_time,
225 	.get_rtc_time		= mpc8xx_get_rtc_time,
226 	.progress		= udbg_progress,
227 };
228