1 /* 2 * Copyright (C) 1995 Linus Torvalds 3 * Adapted from 'alpha' version by Gary Thomas 4 * Modified by Cort Dougan (cort@cs.nmt.edu) 5 * Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net) 6 * Further modified for generic 8xx by Dan. 7 */ 8 9 /* 10 * bootup setup stuff.. 11 */ 12 13 #include <linux/kernel.h> 14 #include <linux/interrupt.h> 15 #include <linux/init.h> 16 #include <linux/time.h> 17 #include <linux/rtc.h> 18 #include <linux/fsl_devices.h> 19 20 #include <asm/io.h> 21 #include <asm/8xx_immap.h> 22 #include <asm/prom.h> 23 #include <asm/fs_pd.h> 24 #include <mm/mmu_decl.h> 25 26 #include <sysdev/mpc8xx_pic.h> 27 28 #include "mpc8xx.h" 29 30 extern int cpm_pic_init(void); 31 extern int cpm_get_irq(void); 32 33 /* A place holder for time base interrupts, if they are ever enabled. */ 34 static irqreturn_t timebase_interrupt(int irq, void *dev) 35 { 36 printk ("timebase_interrupt()\n"); 37 38 return IRQ_HANDLED; 39 } 40 41 static struct irqaction tbint_irqaction = { 42 .handler = timebase_interrupt, 43 .flags = IRQF_NO_THREAD, 44 .name = "tbint", 45 }; 46 47 /* per-board overridable init_internal_rtc() function. */ 48 void __init __attribute__ ((weak)) 49 init_internal_rtc(void) 50 { 51 sit8xx_t __iomem *sys_tmr = immr_map(im_sit); 52 53 /* Disable the RTC one second and alarm interrupts. */ 54 clrbits16(&sys_tmr->sit_rtcsc, (RTCSC_SIE | RTCSC_ALE)); 55 56 /* Enable the RTC */ 57 setbits16(&sys_tmr->sit_rtcsc, (RTCSC_RTF | RTCSC_RTE)); 58 immr_unmap(sys_tmr); 59 } 60 61 static int __init get_freq(char *name, unsigned long *val) 62 { 63 struct device_node *cpu; 64 const unsigned int *fp; 65 int found = 0; 66 67 /* The cpu node should have timebase and clock frequency properties */ 68 cpu = of_find_node_by_type(NULL, "cpu"); 69 70 if (cpu) { 71 fp = of_get_property(cpu, name, NULL); 72 if (fp) { 73 found = 1; 74 *val = *fp; 75 } 76 77 of_node_put(cpu); 78 } 79 80 return found; 81 } 82 83 /* The decrementer counts at the system (internal) clock frequency divided by 84 * sixteen, or external oscillator divided by four. We force the processor 85 * to use system clock divided by sixteen. 86 */ 87 void __init mpc8xx_calibrate_decr(void) 88 { 89 struct device_node *cpu; 90 cark8xx_t __iomem *clk_r1; 91 car8xx_t __iomem *clk_r2; 92 sitk8xx_t __iomem *sys_tmr1; 93 sit8xx_t __iomem *sys_tmr2; 94 int irq, virq; 95 96 clk_r1 = immr_map(im_clkrstk); 97 98 /* Unlock the SCCR. */ 99 out_be32(&clk_r1->cark_sccrk, ~KAPWR_KEY); 100 out_be32(&clk_r1->cark_sccrk, KAPWR_KEY); 101 immr_unmap(clk_r1); 102 103 /* Force all 8xx processors to use divide by 16 processor clock. */ 104 clk_r2 = immr_map(im_clkrst); 105 setbits32(&clk_r2->car_sccr, 0x02000000); 106 immr_unmap(clk_r2); 107 108 /* Processor frequency is MHz. 109 */ 110 ppc_proc_freq = 50000000; 111 if (!get_freq("clock-frequency", &ppc_proc_freq)) 112 printk(KERN_ERR "WARNING: Estimating processor frequency " 113 "(not found)\n"); 114 115 ppc_tb_freq = ppc_proc_freq / 16; 116 printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq); 117 118 /* Perform some more timer/timebase initialization. This used 119 * to be done elsewhere, but other changes caused it to get 120 * called more than once....that is a bad thing. 121 * 122 * First, unlock all of the registers we are going to modify. 123 * To protect them from corruption during power down, registers 124 * that are maintained by keep alive power are "locked". To 125 * modify these registers we have to write the key value to 126 * the key location associated with the register. 127 * Some boards power up with these unlocked, while others 128 * are locked. Writing anything (including the unlock code?) 129 * to the unlocked registers will lock them again. So, here 130 * we guarantee the registers are locked, then we unlock them 131 * for our use. 132 */ 133 sys_tmr1 = immr_map(im_sitk); 134 out_be32(&sys_tmr1->sitk_tbscrk, ~KAPWR_KEY); 135 out_be32(&sys_tmr1->sitk_rtcsck, ~KAPWR_KEY); 136 out_be32(&sys_tmr1->sitk_tbk, ~KAPWR_KEY); 137 out_be32(&sys_tmr1->sitk_tbscrk, KAPWR_KEY); 138 out_be32(&sys_tmr1->sitk_rtcsck, KAPWR_KEY); 139 out_be32(&sys_tmr1->sitk_tbk, KAPWR_KEY); 140 immr_unmap(sys_tmr1); 141 142 init_internal_rtc(); 143 144 /* Enabling the decrementer also enables the timebase interrupts 145 * (or from the other point of view, to get decrementer interrupts 146 * we have to enable the timebase). The decrementer interrupt 147 * is wired into the vector table, nothing to do here for that. 148 */ 149 cpu = of_find_node_by_type(NULL, "cpu"); 150 virq= irq_of_parse_and_map(cpu, 0); 151 irq = virq_to_hw(virq); 152 153 sys_tmr2 = immr_map(im_sit); 154 out_be16(&sys_tmr2->sit_tbscr, ((1 << (7 - (irq/2))) << 8) | 155 (TBSCR_TBF | TBSCR_TBE)); 156 immr_unmap(sys_tmr2); 157 158 if (setup_irq(virq, &tbint_irqaction)) 159 panic("Could not allocate timer IRQ!"); 160 } 161 162 /* The RTC on the MPC8xx is an internal register. 163 * We want to protect this during power down, so we need to unlock, 164 * modify, and re-lock. 165 */ 166 167 int mpc8xx_set_rtc_time(struct rtc_time *tm) 168 { 169 sitk8xx_t __iomem *sys_tmr1; 170 sit8xx_t __iomem *sys_tmr2; 171 int time; 172 173 sys_tmr1 = immr_map(im_sitk); 174 sys_tmr2 = immr_map(im_sit); 175 time = mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday, 176 tm->tm_hour, tm->tm_min, tm->tm_sec); 177 178 out_be32(&sys_tmr1->sitk_rtck, KAPWR_KEY); 179 out_be32(&sys_tmr2->sit_rtc, time); 180 out_be32(&sys_tmr1->sitk_rtck, ~KAPWR_KEY); 181 182 immr_unmap(sys_tmr2); 183 immr_unmap(sys_tmr1); 184 return 0; 185 } 186 187 void mpc8xx_get_rtc_time(struct rtc_time *tm) 188 { 189 unsigned long data; 190 sit8xx_t __iomem *sys_tmr = immr_map(im_sit); 191 192 /* Get time from the RTC. */ 193 data = in_be32(&sys_tmr->sit_rtc); 194 to_tm(data, tm); 195 tm->tm_year -= 1900; 196 tm->tm_mon -= 1; 197 immr_unmap(sys_tmr); 198 return; 199 } 200 201 void mpc8xx_restart(char *cmd) 202 { 203 car8xx_t __iomem *clk_r = immr_map(im_clkrst); 204 205 206 local_irq_disable(); 207 208 setbits32(&clk_r->car_plprcr, 0x00000080); 209 /* Clear the ME bit in MSR to cause checkstop on machine check 210 */ 211 mtmsr(mfmsr() & ~0x1000); 212 213 in_8(&clk_r->res[0]); 214 panic("Restart failed\n"); 215 } 216 217 static void cpm_cascade(unsigned int irq, struct irq_desc *desc) 218 { 219 struct irq_chip *chip = irq_desc_get_chip(desc); 220 int cascade_irq = cpm_get_irq(); 221 222 if (cascade_irq >= 0) 223 generic_handle_irq(cascade_irq); 224 225 chip->irq_eoi(&desc->irq_data); 226 } 227 228 /* Initialize the internal interrupt controllers. The number of 229 * interrupts supported can vary with the processor type, and the 230 * 82xx family can have up to 64. 231 * External interrupts can be either edge or level triggered, and 232 * need to be initialized by the appropriate driver. 233 */ 234 void __init mpc8xx_pics_init(void) 235 { 236 int irq; 237 238 if (mpc8xx_pic_init()) { 239 printk(KERN_ERR "Failed interrupt 8xx controller initialization\n"); 240 return; 241 } 242 243 irq = cpm_pic_init(); 244 if (irq != NO_IRQ) 245 irq_set_chained_handler(irq, cpm_cascade); 246 } 247