xref: /openbmc/linux/arch/powerpc/platforms/8xx/Kconfig (revision 08f3e087)
1# SPDX-License-Identifier: GPL-2.0
2config CPM1
3	bool
4	select CPM
5
6choice
7	prompt "8xx Machine Type"
8	depends on PPC_8xx
9	default MPC885ADS
10
11config MPC8XXFADS
12	bool "FADS"
13
14config MPC86XADS
15	bool "MPC86XADS"
16	select CPM1
17	help
18	  MPC86x Application Development System by Freescale Semiconductor.
19	  The MPC86xADS is meant to serve as a platform for s/w and h/w
20	  development around the MPC86X processor families.
21
22config MPC885ADS
23	bool "MPC885ADS"
24	select CPM1
25	select OF_DYNAMIC
26	help
27	  Freescale Semiconductor MPC885 Application Development System (ADS).
28	  Also known as DUET.
29	  The MPC885ADS is meant to serve as a platform for s/w and h/w
30	  development around the MPC885 processor family.
31
32config PPC_EP88XC
33	bool "Embedded Planet EP88xC (a.k.a. CWH-PPC-885XN-VE)"
34	select CPM1
35	help
36	  This enables support for the Embedded Planet EP88xC board.
37
38	  This board is also resold by Freescale as the QUICCStart
39	  MPC885 Evaluation System and/or the CWH-PPC-885XN-VE.
40
41config PPC_ADDER875
42	bool "Analogue & Micro Adder 875"
43	select CPM1
44	help
45	  This enables support for the Analogue & Micro Adder 875
46	  board.
47
48config TQM8XX
49	bool "TQM8XX"
50	select CPM1
51	help
52	  support for the mpc8xx based boards from TQM.
53
54endchoice
55
56menu "Freescale Ethernet driver platform-specific options"
57	depends on (FS_ENET && MPC885ADS)
58
59	config MPC8xx_SECOND_ETH
60	bool "Second Ethernet channel"
61	depends on MPC885ADS
62	default y
63	help
64	  This enables support for second Ethernet on MPC885ADS and MPC86xADS boards.
65	  The latter will use SCC1, for 885ADS you can select it below.
66
67	choice
68		prompt "Second Ethernet channel"
69		depends on MPC8xx_SECOND_ETH
70		default MPC8xx_SECOND_ETH_FEC2
71
72		config MPC8xx_SECOND_ETH_FEC2
73		bool "FEC2"
74		depends on MPC885ADS
75		help
76		  Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2
77		  (often 2-nd UART) will not work if this is enabled.
78
79		config MPC8xx_SECOND_ETH_SCC3
80		bool "SCC3"
81		depends on MPC885ADS
82		help
83		  Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1
84		  (often 1-nd UART) will not work if this is enabled.
85
86	endchoice
87
88endmenu
89
90#
91# MPC8xx Communication options
92#
93
94menu "MPC8xx CPM Options"
95	depends on PPC_8xx
96
97# This doesn't really belong here, but it is convenient to ask
98# 8xx specific questions.
99comment "Generic MPC8xx Options"
100
101config 8xx_GPIO
102	bool "GPIO API Support"
103	select GPIOLIB
104	help
105	  Saying Y here will cause the ports on an MPC8xx processor to be used
106	  with the GPIO API.  If you say N here, the kernel needs less memory.
107
108	  If in doubt, say Y here.
109
110config 8xx_CPU15
111	bool "CPU15 Silicon Errata"
112	depends on !HUGETLB_PAGE
113	default y
114	help
115	  This enables a workaround for erratum CPU15 on MPC8xx chips.
116	  This bug can cause incorrect code execution under certain
117	  circumstances.  This workaround adds some overhead (a TLB miss
118	  every time execution crosses a page boundary), and you may wish
119	  to disable it if you have worked around the bug in the compiler
120	  (by not placing conditional branches or branches to LR or CTR
121	  in the last word of a page, with a target of the last cache
122	  line in the next page), or if you have used some other
123	  workaround.
124
125	  If in doubt, say Y here.
126
127choice
128	prompt "Microcode patch selection"
129	default NO_UCODE_PATCH
130	help
131	  Help not implemented yet, coming soon.
132
133config NO_UCODE_PATCH
134	bool "None"
135
136config USB_SOF_UCODE_PATCH
137	bool "USB SOF patch"
138	help
139	  Help not implemented yet, coming soon.
140
141config I2C_SPI_UCODE_PATCH
142	bool "I2C/SPI relocation patch"
143	help
144	  Help not implemented yet, coming soon.
145
146config I2C_SPI_SMC1_UCODE_PATCH
147	bool "I2C/SPI/SMC1 relocation patch"
148	help
149	  Help not implemented yet, coming soon.
150
151config SMC_UCODE_PATCH
152	bool "SMC relocation patch"
153	help
154	  This microcode relocates SMC1 and SMC2 parameter RAMs at
155	  offset 0x1ec0 and 0x1fc0 to allow extended parameter RAM
156	  for SCC3 and SCC4.
157
158endchoice
159
160config UCODE_PATCH
161	bool
162	default y
163	depends on !NO_UCODE_PATCH
164
165menu "8xx advanced setup"
166	depends on PPC_8xx
167
168config PIN_TLB
169	bool "Pinned Kernel TLBs"
170	depends on ADVANCED_OPTIONS
171	help
172	  On the 8xx, we have 32 instruction TLBs and 32 data TLBs. In each
173	  table 4 TLBs can be pinned.
174
175	  It reduces the amount of usable TLBs to 28 (ie by 12%). That's the
176	  reason why we make it selectable.
177
178	  This option does nothing, it just activate the selection of what
179	  to pin.
180
181config PIN_TLB_DATA
182	bool "Pinned TLB for DATA"
183	depends on PIN_TLB
184	default y
185	help
186	  This pins the first 32 Mbytes of memory with 8M pages.
187
188config PIN_TLB_IMMR
189	bool "Pinned TLB for IMMR"
190	depends on PIN_TLB
191	default y
192	help
193	  This pins the IMMR area with a 512kbytes page. In case
194	  CONFIG_PIN_TLB_DATA is also selected, it will reduce
195	  CONFIG_PIN_TLB_DATA to 24 Mbytes.
196
197endmenu
198
199endmenu
200