1 /* 2 * GE SBC610 board support 3 * 4 * Author: Martyn Welch <martyn.welch@ge.com> 5 * 6 * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. 7 * 8 * This program is free software; you can redistribute it and/or modify it 9 * under the terms of the GNU General Public License as published by the 10 * Free Software Foundation; either version 2 of the License, or (at your 11 * option) any later version. 12 * 13 * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines) 14 * Copyright 2006 Freescale Semiconductor Inc. 15 * 16 * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c 17 */ 18 19 #include <linux/stddef.h> 20 #include <linux/kernel.h> 21 #include <linux/pci.h> 22 #include <linux/kdev_t.h> 23 #include <linux/delay.h> 24 #include <linux/seq_file.h> 25 #include <linux/of_platform.h> 26 27 #include <asm/time.h> 28 #include <asm/machdep.h> 29 #include <asm/pci-bridge.h> 30 #include <asm/prom.h> 31 #include <mm/mmu_decl.h> 32 #include <asm/udbg.h> 33 34 #include <asm/mpic.h> 35 #include <asm/nvram.h> 36 37 #include <sysdev/fsl_pci.h> 38 #include <sysdev/fsl_soc.h> 39 #include <sysdev/ge/ge_pic.h> 40 41 #include "mpc86xx.h" 42 43 #undef DEBUG 44 45 #ifdef DEBUG 46 #define DBG (fmt...) do { printk(KERN_ERR "SBC610: " fmt); } while (0) 47 #else 48 #define DBG (fmt...) do { } while (0) 49 #endif 50 51 void __iomem *sbc610_regs; 52 53 static void __init gef_sbc610_init_irq(void) 54 { 55 struct device_node *cascade_node = NULL; 56 57 mpc86xx_init_irq(); 58 59 /* 60 * There is a simple interrupt handler in the main FPGA, this needs 61 * to be cascaded into the MPIC 62 */ 63 cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic"); 64 if (!cascade_node) { 65 printk(KERN_WARNING "SBC610: No FPGA PIC\n"); 66 return; 67 } 68 69 gef_pic_init(cascade_node); 70 of_node_put(cascade_node); 71 } 72 73 static void __init gef_sbc610_setup_arch(void) 74 { 75 struct device_node *regs; 76 77 printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n"); 78 79 #ifdef CONFIG_SMP 80 mpc86xx_smp_init(); 81 #endif 82 83 fsl_pci_assign_primary(); 84 85 /* Remap basic board registers */ 86 regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs"); 87 if (regs) { 88 sbc610_regs = of_iomap(regs, 0); 89 if (sbc610_regs == NULL) 90 printk(KERN_WARNING "Unable to map board registers\n"); 91 of_node_put(regs); 92 } 93 94 #if defined(CONFIG_MMIO_NVRAM) 95 mmio_nvram_init(); 96 #endif 97 } 98 99 /* Return the PCB revision */ 100 static unsigned int gef_sbc610_get_pcb_rev(void) 101 { 102 unsigned int reg; 103 104 reg = ioread32(sbc610_regs); 105 return (reg >> 8) & 0xff; 106 } 107 108 /* Return the board (software) revision */ 109 static unsigned int gef_sbc610_get_board_rev(void) 110 { 111 unsigned int reg; 112 113 reg = ioread32(sbc610_regs); 114 return (reg >> 16) & 0xff; 115 } 116 117 /* Return the FPGA revision */ 118 static unsigned int gef_sbc610_get_fpga_rev(void) 119 { 120 unsigned int reg; 121 122 reg = ioread32(sbc610_regs); 123 return (reg >> 24) & 0xf; 124 } 125 126 static void gef_sbc610_show_cpuinfo(struct seq_file *m) 127 { 128 uint svid = mfspr(SPRN_SVR); 129 130 seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n"); 131 132 seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(), 133 ('A' + gef_sbc610_get_board_rev() - 1)); 134 seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc610_get_fpga_rev()); 135 136 seq_printf(m, "SVR\t\t: 0x%x\n", svid); 137 } 138 139 static void gef_sbc610_nec_fixup(struct pci_dev *pdev) 140 { 141 unsigned int val; 142 143 /* Do not do the fixup on other platforms! */ 144 if (!machine_is(gef_sbc610)) 145 return; 146 147 printk(KERN_INFO "Running NEC uPD720101 Fixup\n"); 148 149 /* Ensure ports 1, 2, 3, 4 & 5 are enabled */ 150 pci_read_config_dword(pdev, 0xe0, &val); 151 pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x5); 152 153 /* System clock is 48-MHz Oscillator and EHCI Enabled. */ 154 pci_write_config_dword(pdev, 0xe4, 1 << 5); 155 } 156 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, 157 gef_sbc610_nec_fixup); 158 159 /* 160 * Called very early, device-tree isn't unflattened 161 * 162 * This function is called to determine whether the BSP is compatible with the 163 * supplied device-tree, which is assumed to be the correct one for the actual 164 * board. It is expected thati, in the future, a kernel may support multiple 165 * boards. 166 */ 167 static int __init gef_sbc610_probe(void) 168 { 169 if (of_machine_is_compatible("gef,sbc610")) 170 return 1; 171 172 return 0; 173 } 174 175 machine_arch_initcall(gef_sbc610, mpc86xx_common_publish_devices); 176 177 define_machine(gef_sbc610) { 178 .name = "GE SBC610", 179 .probe = gef_sbc610_probe, 180 .setup_arch = gef_sbc610_setup_arch, 181 .init_IRQ = gef_sbc610_init_irq, 182 .show_cpuinfo = gef_sbc610_show_cpuinfo, 183 .get_irq = mpic_get_irq, 184 .time_init = mpc86xx_time_init, 185 .calibrate_decr = generic_calibrate_decr, 186 .progress = udbg_progress, 187 #ifdef CONFIG_PCI 188 .pcibios_fixup_bus = fsl_pcibios_fixup_bus, 189 #endif 190 }; 191