1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * GE SBC610 board support 4 * 5 * Author: Martyn Welch <martyn.welch@ge.com> 6 * 7 * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. 8 * 9 * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines) 10 * Copyright 2006 Freescale Semiconductor Inc. 11 * 12 * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c 13 */ 14 15 #include <linux/stddef.h> 16 #include <linux/kernel.h> 17 #include <linux/pci.h> 18 #include <linux/kdev_t.h> 19 #include <linux/delay.h> 20 #include <linux/seq_file.h> 21 #include <linux/of_address.h> 22 #include <linux/of_platform.h> 23 24 #include <asm/time.h> 25 #include <asm/machdep.h> 26 #include <asm/pci-bridge.h> 27 #include <mm/mmu_decl.h> 28 #include <asm/udbg.h> 29 30 #include <asm/mpic.h> 31 #include <asm/nvram.h> 32 33 #include <sysdev/fsl_pci.h> 34 #include <sysdev/fsl_soc.h> 35 #include <sysdev/ge/ge_pic.h> 36 37 #include "mpc86xx.h" 38 39 #undef DEBUG 40 41 #ifdef DEBUG 42 #define DBG (fmt...) do { printk(KERN_ERR "SBC610: " fmt); } while (0) 43 #else 44 #define DBG (fmt...) do { } while (0) 45 #endif 46 47 void __iomem *sbc610_regs; 48 49 static void __init gef_sbc610_init_irq(void) 50 { 51 struct device_node *cascade_node = NULL; 52 53 mpc86xx_init_irq(); 54 55 /* 56 * There is a simple interrupt handler in the main FPGA, this needs 57 * to be cascaded into the MPIC 58 */ 59 cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic"); 60 if (!cascade_node) { 61 printk(KERN_WARNING "SBC610: No FPGA PIC\n"); 62 return; 63 } 64 65 gef_pic_init(cascade_node); 66 of_node_put(cascade_node); 67 } 68 69 static void __init gef_sbc610_setup_arch(void) 70 { 71 struct device_node *regs; 72 73 printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n"); 74 75 #ifdef CONFIG_SMP 76 mpc86xx_smp_init(); 77 #endif 78 79 fsl_pci_assign_primary(); 80 81 /* Remap basic board registers */ 82 regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs"); 83 if (regs) { 84 sbc610_regs = of_iomap(regs, 0); 85 if (sbc610_regs == NULL) 86 printk(KERN_WARNING "Unable to map board registers\n"); 87 of_node_put(regs); 88 } 89 90 #if defined(CONFIG_MMIO_NVRAM) 91 mmio_nvram_init(); 92 #endif 93 } 94 95 /* Return the PCB revision */ 96 static unsigned int gef_sbc610_get_pcb_rev(void) 97 { 98 unsigned int reg; 99 100 reg = ioread32(sbc610_regs); 101 return (reg >> 8) & 0xff; 102 } 103 104 /* Return the board (software) revision */ 105 static unsigned int gef_sbc610_get_board_rev(void) 106 { 107 unsigned int reg; 108 109 reg = ioread32(sbc610_regs); 110 return (reg >> 16) & 0xff; 111 } 112 113 /* Return the FPGA revision */ 114 static unsigned int gef_sbc610_get_fpga_rev(void) 115 { 116 unsigned int reg; 117 118 reg = ioread32(sbc610_regs); 119 return (reg >> 24) & 0xf; 120 } 121 122 static void gef_sbc610_show_cpuinfo(struct seq_file *m) 123 { 124 uint svid = mfspr(SPRN_SVR); 125 126 seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n"); 127 128 seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(), 129 ('A' + gef_sbc610_get_board_rev() - 1)); 130 seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc610_get_fpga_rev()); 131 132 seq_printf(m, "SVR\t\t: 0x%x\n", svid); 133 } 134 135 static void gef_sbc610_nec_fixup(struct pci_dev *pdev) 136 { 137 unsigned int val; 138 139 /* Do not do the fixup on other platforms! */ 140 if (!machine_is(gef_sbc610)) 141 return; 142 143 printk(KERN_INFO "Running NEC uPD720101 Fixup\n"); 144 145 /* Ensure ports 1, 2, 3, 4 & 5 are enabled */ 146 pci_read_config_dword(pdev, 0xe0, &val); 147 pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x5); 148 149 /* System clock is 48-MHz Oscillator and EHCI Enabled. */ 150 pci_write_config_dword(pdev, 0xe4, 1 << 5); 151 } 152 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, 153 gef_sbc610_nec_fixup); 154 155 machine_arch_initcall(gef_sbc610, mpc86xx_common_publish_devices); 156 157 define_machine(gef_sbc610) { 158 .name = "GE SBC610", 159 .compatible = "gef,sbc610", 160 .setup_arch = gef_sbc610_setup_arch, 161 .init_IRQ = gef_sbc610_init_irq, 162 .show_cpuinfo = gef_sbc610_show_cpuinfo, 163 .get_irq = mpic_get_irq, 164 .time_init = mpc86xx_time_init, 165 .progress = udbg_progress, 166 #ifdef CONFIG_PCI 167 .pcibios_fixup_bus = fsl_pcibios_fixup_bus, 168 #endif 169 }; 170