1 /* 2 * GE SBC310 board support 3 * 4 * Author: Martyn Welch <martyn.welch@ge.com> 5 * 6 * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. 7 * 8 * This program is free software; you can redistribute it and/or modify it 9 * under the terms of the GNU General Public License as published by the 10 * Free Software Foundation; either version 2 of the License, or (at your 11 * option) any later version. 12 * 13 * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines) 14 * Copyright 2006 Freescale Semiconductor Inc. 15 * 16 * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c 17 */ 18 19 #include <linux/stddef.h> 20 #include <linux/kernel.h> 21 #include <linux/pci.h> 22 #include <linux/kdev_t.h> 23 #include <linux/delay.h> 24 #include <linux/seq_file.h> 25 #include <linux/of_platform.h> 26 27 #include <asm/time.h> 28 #include <asm/machdep.h> 29 #include <asm/pci-bridge.h> 30 #include <asm/prom.h> 31 #include <mm/mmu_decl.h> 32 #include <asm/udbg.h> 33 34 #include <asm/mpic.h> 35 #include <asm/nvram.h> 36 37 #include <sysdev/fsl_pci.h> 38 #include <sysdev/fsl_soc.h> 39 #include <sysdev/ge/ge_pic.h> 40 41 #include "mpc86xx.h" 42 43 #undef DEBUG 44 45 #ifdef DEBUG 46 #define DBG (fmt...) do { printk(KERN_ERR "SBC310: " fmt); } while (0) 47 #else 48 #define DBG (fmt...) do { } while (0) 49 #endif 50 51 void __iomem *sbc310_regs; 52 53 static void __init gef_sbc310_init_irq(void) 54 { 55 struct device_node *cascade_node = NULL; 56 57 mpc86xx_init_irq(); 58 59 /* 60 * There is a simple interrupt handler in the main FPGA, this needs 61 * to be cascaded into the MPIC 62 */ 63 cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic"); 64 if (!cascade_node) { 65 printk(KERN_WARNING "SBC310: No FPGA PIC\n"); 66 return; 67 } 68 69 gef_pic_init(cascade_node); 70 of_node_put(cascade_node); 71 } 72 73 static void __init gef_sbc310_setup_arch(void) 74 { 75 struct device_node *regs; 76 printk(KERN_INFO "GE Intelligent Platforms SBC310 6U VPX SBC\n"); 77 78 #ifdef CONFIG_SMP 79 mpc86xx_smp_init(); 80 #endif 81 82 fsl_pci_assign_primary(); 83 84 /* Remap basic board registers */ 85 regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs"); 86 if (regs) { 87 sbc310_regs = of_iomap(regs, 0); 88 if (sbc310_regs == NULL) 89 printk(KERN_WARNING "Unable to map board registers\n"); 90 of_node_put(regs); 91 } 92 93 #if defined(CONFIG_MMIO_NVRAM) 94 mmio_nvram_init(); 95 #endif 96 } 97 98 /* Return the PCB revision */ 99 static unsigned int gef_sbc310_get_board_id(void) 100 { 101 unsigned int reg; 102 103 reg = ioread32(sbc310_regs); 104 return reg & 0xff; 105 } 106 107 /* Return the PCB revision */ 108 static unsigned int gef_sbc310_get_pcb_rev(void) 109 { 110 unsigned int reg; 111 112 reg = ioread32(sbc310_regs); 113 return (reg >> 8) & 0xff; 114 } 115 116 /* Return the board (software) revision */ 117 static unsigned int gef_sbc310_get_board_rev(void) 118 { 119 unsigned int reg; 120 121 reg = ioread32(sbc310_regs); 122 return (reg >> 16) & 0xff; 123 } 124 125 /* Return the FPGA revision */ 126 static unsigned int gef_sbc310_get_fpga_rev(void) 127 { 128 unsigned int reg; 129 130 reg = ioread32(sbc310_regs); 131 return (reg >> 24) & 0xf; 132 } 133 134 static void gef_sbc310_show_cpuinfo(struct seq_file *m) 135 { 136 uint svid = mfspr(SPRN_SVR); 137 138 seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n"); 139 140 seq_printf(m, "Board ID\t: 0x%2.2x\n", gef_sbc310_get_board_id()); 141 seq_printf(m, "Revision\t: %u%c\n", gef_sbc310_get_pcb_rev(), 142 ('A' + gef_sbc310_get_board_rev() - 1)); 143 seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc310_get_fpga_rev()); 144 145 seq_printf(m, "SVR\t\t: 0x%x\n", svid); 146 147 } 148 149 static void gef_sbc310_nec_fixup(struct pci_dev *pdev) 150 { 151 unsigned int val; 152 153 /* Do not do the fixup on other platforms! */ 154 if (!machine_is(gef_sbc310)) 155 return; 156 157 printk(KERN_INFO "Running NEC uPD720101 Fixup\n"); 158 159 /* Ensure only ports 1 & 2 are enabled */ 160 pci_read_config_dword(pdev, 0xe0, &val); 161 pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x2); 162 163 /* System clock is 48-MHz Oscillator and EHCI Enabled. */ 164 pci_write_config_dword(pdev, 0xe4, 1 << 5); 165 } 166 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, 167 gef_sbc310_nec_fixup); 168 169 /* 170 * Called very early, device-tree isn't unflattened 171 * 172 * This function is called to determine whether the BSP is compatible with the 173 * supplied device-tree, which is assumed to be the correct one for the actual 174 * board. It is expected thati, in the future, a kernel may support multiple 175 * boards. 176 */ 177 static int __init gef_sbc310_probe(void) 178 { 179 if (of_machine_is_compatible("gef,sbc310")) 180 return 1; 181 182 return 0; 183 } 184 185 machine_arch_initcall(gef_sbc310, mpc86xx_common_publish_devices); 186 187 define_machine(gef_sbc310) { 188 .name = "GE SBC310", 189 .probe = gef_sbc310_probe, 190 .setup_arch = gef_sbc310_setup_arch, 191 .init_IRQ = gef_sbc310_init_irq, 192 .show_cpuinfo = gef_sbc310_show_cpuinfo, 193 .get_irq = mpic_get_irq, 194 .time_init = mpc86xx_time_init, 195 .calibrate_decr = generic_calibrate_decr, 196 .progress = udbg_progress, 197 #ifdef CONFIG_PCI 198 .pcibios_fixup_bus = fsl_pcibios_fixup_bus, 199 #endif 200 }; 201