1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2009 Extreme Engineering Solutions, Inc. 4 * 5 * X-ES board-specific functionality 6 * 7 * Based on mpc85xx_ds code from Freescale Semiconductor, Inc. 8 * 9 * Author: Nate Case <ncase@xes-inc.com> 10 */ 11 12 #include <linux/stddef.h> 13 #include <linux/kernel.h> 14 #include <linux/pci.h> 15 #include <linux/kdev_t.h> 16 #include <linux/delay.h> 17 #include <linux/seq_file.h> 18 #include <linux/interrupt.h> 19 #include <linux/of_platform.h> 20 21 #include <asm/time.h> 22 #include <asm/machdep.h> 23 #include <asm/pci-bridge.h> 24 #include <mm/mmu_decl.h> 25 #include <asm/prom.h> 26 #include <asm/udbg.h> 27 #include <asm/mpic.h> 28 29 #include <sysdev/fsl_soc.h> 30 #include <sysdev/fsl_pci.h> 31 #include "smp.h" 32 33 #include "mpc85xx.h" 34 35 /* A few bit definitions needed for fixups on some boards */ 36 #define MPC85xx_L2CTL_L2E 0x80000000 /* L2 enable */ 37 #define MPC85xx_L2CTL_L2I 0x40000000 /* L2 flash invalidate */ 38 #define MPC85xx_L2CTL_L2SIZ_MASK 0x30000000 /* L2 SRAM size (R/O) */ 39 40 void __init xes_mpc85xx_pic_init(void) 41 { 42 struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 43 0, 256, " OpenPIC "); 44 BUG_ON(mpic == NULL); 45 mpic_init(mpic); 46 } 47 48 static void __init xes_mpc85xx_configure_l2(void __iomem *l2_base) 49 { 50 volatile uint32_t ctl, tmp; 51 52 asm volatile("msync; isync"); 53 tmp = in_be32(l2_base); 54 55 /* 56 * xMon may have enabled part of L2 as SRAM, so we need to set it 57 * up for all cache mode just to be safe. 58 */ 59 printk(KERN_INFO "xes_mpc85xx: Enabling L2 as cache\n"); 60 61 ctl = MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2I; 62 if (of_machine_is_compatible("MPC8540") || 63 of_machine_is_compatible("MPC8560")) 64 /* 65 * Assume L2 SRAM is used fully for cache, so set 66 * L2BLKSZ (bits 4:5) to match L2SIZ (bits 2:3). 67 */ 68 ctl |= (tmp & MPC85xx_L2CTL_L2SIZ_MASK) >> 2; 69 70 asm volatile("msync; isync"); 71 out_be32(l2_base, ctl); 72 asm volatile("msync; isync"); 73 } 74 75 static void __init xes_mpc85xx_fixups(void) 76 { 77 struct device_node *np; 78 int err; 79 80 /* 81 * Legacy xMon firmware on some X-ES boards does not enable L2 82 * as cache. We must ensure that they get enabled here. 83 */ 84 for_each_node_by_name(np, "l2-cache-controller") { 85 struct resource r[2]; 86 void __iomem *l2_base; 87 88 /* Only MPC8548, MPC8540, and MPC8560 boards are affected */ 89 if (!of_device_is_compatible(np, 90 "fsl,mpc8548-l2-cache-controller") && 91 !of_device_is_compatible(np, 92 "fsl,mpc8540-l2-cache-controller") && 93 !of_device_is_compatible(np, 94 "fsl,mpc8560-l2-cache-controller")) 95 continue; 96 97 err = of_address_to_resource(np, 0, &r[0]); 98 if (err) { 99 printk(KERN_WARNING "xes_mpc85xx: Could not get " 100 "resource for device tree node '%pOF'", 101 np); 102 continue; 103 } 104 105 l2_base = ioremap(r[0].start, resource_size(&r[0])); 106 107 xes_mpc85xx_configure_l2(l2_base); 108 } 109 } 110 111 /* 112 * Setup the architecture 113 */ 114 static void __init xes_mpc85xx_setup_arch(void) 115 { 116 struct device_node *root; 117 const char *model = "Unknown"; 118 119 root = of_find_node_by_path("/"); 120 if (root == NULL) 121 return; 122 123 model = of_get_property(root, "model", NULL); 124 125 printk(KERN_INFO "X-ES MPC85xx-based single-board computer: %s\n", 126 model + strlen("xes,")); 127 128 xes_mpc85xx_fixups(); 129 130 mpc85xx_smp_init(); 131 132 fsl_pci_assign_primary(); 133 } 134 135 machine_arch_initcall(xes_mpc8572, mpc85xx_common_publish_devices); 136 machine_arch_initcall(xes_mpc8548, mpc85xx_common_publish_devices); 137 machine_arch_initcall(xes_mpc8540, mpc85xx_common_publish_devices); 138 139 /* 140 * Called very early, device-tree isn't unflattened 141 */ 142 static int __init xes_mpc8572_probe(void) 143 { 144 return of_machine_is_compatible("xes,MPC8572"); 145 } 146 147 static int __init xes_mpc8548_probe(void) 148 { 149 return of_machine_is_compatible("xes,MPC8548"); 150 } 151 152 static int __init xes_mpc8540_probe(void) 153 { 154 return of_machine_is_compatible("xes,MPC8540"); 155 } 156 157 define_machine(xes_mpc8572) { 158 .name = "X-ES MPC8572", 159 .probe = xes_mpc8572_probe, 160 .setup_arch = xes_mpc85xx_setup_arch, 161 .init_IRQ = xes_mpc85xx_pic_init, 162 #ifdef CONFIG_PCI 163 .pcibios_fixup_bus = fsl_pcibios_fixup_bus, 164 .pcibios_fixup_phb = fsl_pcibios_fixup_phb, 165 #endif 166 .get_irq = mpic_get_irq, 167 .calibrate_decr = generic_calibrate_decr, 168 .progress = udbg_progress, 169 }; 170 171 define_machine(xes_mpc8548) { 172 .name = "X-ES MPC8548", 173 .probe = xes_mpc8548_probe, 174 .setup_arch = xes_mpc85xx_setup_arch, 175 .init_IRQ = xes_mpc85xx_pic_init, 176 #ifdef CONFIG_PCI 177 .pcibios_fixup_bus = fsl_pcibios_fixup_bus, 178 .pcibios_fixup_phb = fsl_pcibios_fixup_phb, 179 #endif 180 .get_irq = mpic_get_irq, 181 .calibrate_decr = generic_calibrate_decr, 182 .progress = udbg_progress, 183 }; 184 185 define_machine(xes_mpc8540) { 186 .name = "X-ES MPC8540", 187 .probe = xes_mpc8540_probe, 188 .setup_arch = xes_mpc85xx_setup_arch, 189 .init_IRQ = xes_mpc85xx_pic_init, 190 #ifdef CONFIG_PCI 191 .pcibios_fixup_bus = fsl_pcibios_fixup_bus, 192 .pcibios_fixup_phb = fsl_pcibios_fixup_phb, 193 #endif 194 .get_irq = mpic_get_irq, 195 .calibrate_decr = generic_calibrate_decr, 196 .progress = udbg_progress, 197 }; 198