1 /* 2 * Copyright (C) 2009 Extreme Engineering Solutions, Inc. 3 * 4 * X-ES board-specific functionality 5 * 6 * Based on mpc85xx_ds code from Freescale Semiconductor, Inc. 7 * 8 * Author: Nate Case <ncase@xes-inc.com> 9 * 10 * This is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License version 2 as 12 * published by the Free Software Foundation. 13 */ 14 15 #include <linux/stddef.h> 16 #include <linux/kernel.h> 17 #include <linux/pci.h> 18 #include <linux/kdev_t.h> 19 #include <linux/delay.h> 20 #include <linux/seq_file.h> 21 #include <linux/interrupt.h> 22 #include <linux/of_platform.h> 23 24 #include <asm/time.h> 25 #include <asm/machdep.h> 26 #include <asm/pci-bridge.h> 27 #include <mm/mmu_decl.h> 28 #include <asm/prom.h> 29 #include <asm/udbg.h> 30 #include <asm/mpic.h> 31 32 #include <sysdev/fsl_soc.h> 33 #include <sysdev/fsl_pci.h> 34 #include "smp.h" 35 36 #include "mpc85xx.h" 37 38 /* A few bit definitions needed for fixups on some boards */ 39 #define MPC85xx_L2CTL_L2E 0x80000000 /* L2 enable */ 40 #define MPC85xx_L2CTL_L2I 0x40000000 /* L2 flash invalidate */ 41 #define MPC85xx_L2CTL_L2SIZ_MASK 0x30000000 /* L2 SRAM size (R/O) */ 42 43 void __init xes_mpc85xx_pic_init(void) 44 { 45 struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 46 0, 256, " OpenPIC "); 47 BUG_ON(mpic == NULL); 48 mpic_init(mpic); 49 } 50 51 static void xes_mpc85xx_configure_l2(void __iomem *l2_base) 52 { 53 volatile uint32_t ctl, tmp; 54 55 asm volatile("msync; isync"); 56 tmp = in_be32(l2_base); 57 58 /* 59 * xMon may have enabled part of L2 as SRAM, so we need to set it 60 * up for all cache mode just to be safe. 61 */ 62 printk(KERN_INFO "xes_mpc85xx: Enabling L2 as cache\n"); 63 64 ctl = MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2I; 65 if (of_machine_is_compatible("MPC8540") || 66 of_machine_is_compatible("MPC8560")) 67 /* 68 * Assume L2 SRAM is used fully for cache, so set 69 * L2BLKSZ (bits 4:5) to match L2SIZ (bits 2:3). 70 */ 71 ctl |= (tmp & MPC85xx_L2CTL_L2SIZ_MASK) >> 2; 72 73 asm volatile("msync; isync"); 74 out_be32(l2_base, ctl); 75 asm volatile("msync; isync"); 76 } 77 78 static void xes_mpc85xx_fixups(void) 79 { 80 struct device_node *np; 81 int err; 82 83 /* 84 * Legacy xMon firmware on some X-ES boards does not enable L2 85 * as cache. We must ensure that they get enabled here. 86 */ 87 for_each_node_by_name(np, "l2-cache-controller") { 88 struct resource r[2]; 89 void __iomem *l2_base; 90 91 /* Only MPC8548, MPC8540, and MPC8560 boards are affected */ 92 if (!of_device_is_compatible(np, 93 "fsl,mpc8548-l2-cache-controller") && 94 !of_device_is_compatible(np, 95 "fsl,mpc8540-l2-cache-controller") && 96 !of_device_is_compatible(np, 97 "fsl,mpc8560-l2-cache-controller")) 98 continue; 99 100 err = of_address_to_resource(np, 0, &r[0]); 101 if (err) { 102 printk(KERN_WARNING "xes_mpc85xx: Could not get " 103 "resource for device tree node '%s'", 104 np->full_name); 105 continue; 106 } 107 108 l2_base = ioremap(r[0].start, resource_size(&r[0])); 109 110 xes_mpc85xx_configure_l2(l2_base); 111 } 112 } 113 114 /* 115 * Setup the architecture 116 */ 117 static void __init xes_mpc85xx_setup_arch(void) 118 { 119 struct device_node *root; 120 const char *model = "Unknown"; 121 122 root = of_find_node_by_path("/"); 123 if (root == NULL) 124 return; 125 126 model = of_get_property(root, "model", NULL); 127 128 printk(KERN_INFO "X-ES MPC85xx-based single-board computer: %s\n", 129 model + strlen("xes,")); 130 131 xes_mpc85xx_fixups(); 132 133 mpc85xx_smp_init(); 134 135 fsl_pci_assign_primary(); 136 } 137 138 machine_arch_initcall(xes_mpc8572, mpc85xx_common_publish_devices); 139 machine_arch_initcall(xes_mpc8548, mpc85xx_common_publish_devices); 140 machine_arch_initcall(xes_mpc8540, mpc85xx_common_publish_devices); 141 142 /* 143 * Called very early, device-tree isn't unflattened 144 */ 145 static int __init xes_mpc8572_probe(void) 146 { 147 return of_machine_is_compatible("xes,MPC8572"); 148 } 149 150 static int __init xes_mpc8548_probe(void) 151 { 152 return of_machine_is_compatible("xes,MPC8548"); 153 } 154 155 static int __init xes_mpc8540_probe(void) 156 { 157 return of_machine_is_compatible("xes,MPC8540"); 158 } 159 160 define_machine(xes_mpc8572) { 161 .name = "X-ES MPC8572", 162 .probe = xes_mpc8572_probe, 163 .setup_arch = xes_mpc85xx_setup_arch, 164 .init_IRQ = xes_mpc85xx_pic_init, 165 #ifdef CONFIG_PCI 166 .pcibios_fixup_bus = fsl_pcibios_fixup_bus, 167 .pcibios_fixup_phb = fsl_pcibios_fixup_phb, 168 #endif 169 .get_irq = mpic_get_irq, 170 .calibrate_decr = generic_calibrate_decr, 171 .progress = udbg_progress, 172 }; 173 174 define_machine(xes_mpc8548) { 175 .name = "X-ES MPC8548", 176 .probe = xes_mpc8548_probe, 177 .setup_arch = xes_mpc85xx_setup_arch, 178 .init_IRQ = xes_mpc85xx_pic_init, 179 #ifdef CONFIG_PCI 180 .pcibios_fixup_bus = fsl_pcibios_fixup_bus, 181 .pcibios_fixup_phb = fsl_pcibios_fixup_phb, 182 #endif 183 .get_irq = mpic_get_irq, 184 .calibrate_decr = generic_calibrate_decr, 185 .progress = udbg_progress, 186 }; 187 188 define_machine(xes_mpc8540) { 189 .name = "X-ES MPC8540", 190 .probe = xes_mpc8540_probe, 191 .setup_arch = xes_mpc85xx_setup_arch, 192 .init_IRQ = xes_mpc85xx_pic_init, 193 #ifdef CONFIG_PCI 194 .pcibios_fixup_bus = fsl_pcibios_fixup_bus, 195 .pcibios_fixup_phb = fsl_pcibios_fixup_phb, 196 #endif 197 .get_irq = mpic_get_irq, 198 .calibrate_decr = generic_calibrate_decr, 199 .progress = udbg_progress, 200 }; 201