1 /*
2  * T1042 platform DIU operation
3  *
4  * Copyright 2014 Freescale Semiconductor Inc.
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms of the GNU General Public License as published by the
8  * Free Software Foundation; either version 2 of the License, or (at your
9  * option) any later version.
10  */
11 
12 #include <linux/init.h>
13 #include <linux/io.h>
14 #include <linux/kernel.h>
15 #include <linux/module.h>
16 #include <linux/of.h>
17 #include <linux/of_address.h>
18 
19 #include <sysdev/fsl_soc.h>
20 
21 /*DIU Pixel ClockCR offset in scfg*/
22 #define CCSR_SCFG_PIXCLKCR      0x28
23 
24 /* DIU Pixel Clock bits of the PIXCLKCR */
25 #define PIXCLKCR_PXCKEN		0x80000000
26 #define PIXCLKCR_PXCKINV	0x40000000
27 #define PIXCLKCR_PXCKDLY	0x0000FF00
28 #define PIXCLKCR_PXCLK_MASK	0x00FF0000
29 
30 /* Some CPLD register definitions */
31 #define CPLD_DIUCSR		0x16
32 #define CPLD_DIUCSR_DVIEN	0x80
33 #define CPLD_DIUCSR_BACKLIGHT	0x0f
34 
35 struct device_node *cpld_node;
36 
37 /**
38  * t1042rdb_set_monitor_port: switch the output to a different monitor port
39  */
40 static void t1042rdb_set_monitor_port(enum fsl_diu_monitor_port port)
41 {
42 	void __iomem *cpld_base;
43 
44 	cpld_base = of_iomap(cpld_node, 0);
45 	if (!cpld_base) {
46 		pr_err("%s: Could not map cpld registers\n", __func__);
47 		goto exit;
48 	}
49 
50 	switch (port) {
51 	case FSL_DIU_PORT_DVI:
52 		/* Enable the DVI(HDMI) port, disable the DFP and
53 		 * the backlight
54 		 */
55 		clrbits8(cpld_base + CPLD_DIUCSR, CPLD_DIUCSR_DVIEN);
56 		break;
57 	case FSL_DIU_PORT_LVDS:
58 		/*
59 		 * LVDS also needs backlight enabled, otherwise the display
60 		 * will be blank.
61 		 */
62 		/* Enable the DFP port, disable the DVI*/
63 		setbits8(cpld_base + CPLD_DIUCSR, 0x01 << 8);
64 		setbits8(cpld_base + CPLD_DIUCSR, 0x01 << 4);
65 		setbits8(cpld_base + CPLD_DIUCSR, CPLD_DIUCSR_BACKLIGHT);
66 		break;
67 	default:
68 		pr_err("%s: Unsupported monitor port %i\n", __func__, port);
69 	}
70 
71 	iounmap(cpld_base);
72 exit:
73 	of_node_put(cpld_node);
74 }
75 
76 /**
77  * t1042rdb_set_pixel_clock: program the DIU's clock
78  * @pixclock: pixel clock in ps (pico seconds)
79  */
80 static void t1042rdb_set_pixel_clock(unsigned int pixclock)
81 {
82 	struct device_node *scfg_np;
83 	void __iomem *scfg;
84 	unsigned long freq;
85 	u64 temp;
86 	u32 pxclk;
87 
88 	scfg_np = of_find_compatible_node(NULL, NULL, "fsl,t1040-scfg");
89 	if (!scfg_np) {
90 		pr_err("%s: Missing scfg node. Can not display video.\n",
91 		       __func__);
92 		return;
93 	}
94 
95 	scfg = of_iomap(scfg_np, 0);
96 	of_node_put(scfg_np);
97 	if (!scfg) {
98 		pr_err("%s: Could not map device. Can not display video.\n",
99 		       __func__);
100 		return;
101 	}
102 
103 	/* Convert pixclock into frequency */
104 	temp = 1000000000000ULL;
105 	do_div(temp, pixclock);
106 	freq = temp;
107 
108 	/*
109 	 * 'pxclk' is the ratio of the platform clock to the pixel clock.
110 	 * This number is programmed into the PIXCLKCR register, and the valid
111 	 * range of values is 2-255.
112 	 */
113 	pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq);
114 	pxclk = clamp_t(u32, pxclk, 2, 255);
115 
116 	/* Disable the pixel clock, and set it to non-inverted and no delay */
117 	clrbits32(scfg + CCSR_SCFG_PIXCLKCR,
118 		  PIXCLKCR_PXCKEN | PIXCLKCR_PXCKDLY | PIXCLKCR_PXCLK_MASK);
119 
120 	/* Enable the clock and set the pxclk */
121 	setbits32(scfg + CCSR_SCFG_PIXCLKCR, PIXCLKCR_PXCKEN | (pxclk << 16));
122 
123 	iounmap(scfg);
124 }
125 
126 /**
127  * t1042rdb_valid_monitor_port: set the monitor port for sysfs
128  */
129 static enum fsl_diu_monitor_port
130 t1042rdb_valid_monitor_port(enum fsl_diu_monitor_port port)
131 {
132 	switch (port) {
133 	case FSL_DIU_PORT_DVI:
134 	case FSL_DIU_PORT_LVDS:
135 		return port;
136 	default:
137 		return FSL_DIU_PORT_DVI; /* Dual-link LVDS is not supported */
138 	}
139 }
140 
141 static int __init t1042rdb_diu_init(void)
142 {
143 	cpld_node = of_find_compatible_node(NULL, NULL, "fsl,t1042rdb-cpld");
144 	if (!cpld_node)
145 		return 0;
146 
147 	diu_ops.set_monitor_port	= t1042rdb_set_monitor_port;
148 	diu_ops.set_pixel_clock		= t1042rdb_set_pixel_clock;
149 	diu_ops.valid_monitor_port	= t1042rdb_valid_monitor_port;
150 
151 	return 0;
152 }
153 
154 early_initcall(t1042rdb_diu_init);
155 
156 MODULE_LICENSE("GPL");
157