1 /*
2  * P1022 RDK board specific routines
3  *
4  * Copyright 2012 Freescale Semiconductor, Inc.
5  *
6  * Author: Timur Tabi <timur@freescale.com>
7  *
8  * Based on p1022_ds.c
9  *
10  * This file is licensed under the terms of the GNU General Public License
11  * version 2.  This program is licensed "as is" without any warranty of any
12  * kind, whether express or implied.
13  */
14 
15 #include <linux/fsl/guts.h>
16 #include <linux/pci.h>
17 #include <linux/of_address.h>
18 #include <linux/of_platform.h>
19 #include <asm/div64.h>
20 #include <asm/mpic.h>
21 #include <asm/swiotlb.h>
22 
23 #include <sysdev/fsl_soc.h>
24 #include <sysdev/fsl_pci.h>
25 #include <asm/udbg.h>
26 #include "smp.h"
27 
28 #include "mpc85xx.h"
29 
30 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
31 
32 /* DIU Pixel Clock bits of the CLKDVDR Global Utilities register */
33 #define CLKDVDR_PXCKEN		0x80000000
34 #define CLKDVDR_PXCKINV		0x10000000
35 #define CLKDVDR_PXCKDLY		0x06000000
36 #define CLKDVDR_PXCLK_MASK	0x00FF0000
37 
38 /**
39  * p1022rdk_set_pixel_clock: program the DIU's clock
40  *
41  * @pixclock: the wavelength, in picoseconds, of the clock
42  */
43 void p1022rdk_set_pixel_clock(unsigned int pixclock)
44 {
45 	struct device_node *guts_np = NULL;
46 	struct ccsr_guts __iomem *guts;
47 	unsigned long freq;
48 	u64 temp;
49 	u32 pxclk;
50 
51 	/* Map the global utilities registers. */
52 	guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");
53 	if (!guts_np) {
54 		pr_err("p1022rdk: missing global utilities device node\n");
55 		return;
56 	}
57 
58 	guts = of_iomap(guts_np, 0);
59 	of_node_put(guts_np);
60 	if (!guts) {
61 		pr_err("p1022rdk: could not map global utilities device\n");
62 		return;
63 	}
64 
65 	/* Convert pixclock from a wavelength to a frequency */
66 	temp = 1000000000000ULL;
67 	do_div(temp, pixclock);
68 	freq = temp;
69 
70 	/*
71 	 * 'pxclk' is the ratio of the platform clock to the pixel clock.
72 	 * This number is programmed into the CLKDVDR register, and the valid
73 	 * range of values is 2-255.
74 	 */
75 	pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq);
76 	pxclk = clamp_t(u32, pxclk, 2, 255);
77 
78 	/* Disable the pixel clock, and set it to non-inverted and no delay */
79 	clrbits32(&guts->clkdvdr,
80 		  CLKDVDR_PXCKEN | CLKDVDR_PXCKDLY | CLKDVDR_PXCLK_MASK);
81 
82 	/* Enable the clock and set the pxclk */
83 	setbits32(&guts->clkdvdr, CLKDVDR_PXCKEN | (pxclk << 16));
84 
85 	iounmap(guts);
86 }
87 
88 /**
89  * p1022rdk_valid_monitor_port: set the monitor port for sysfs
90  */
91 enum fsl_diu_monitor_port
92 p1022rdk_valid_monitor_port(enum fsl_diu_monitor_port port)
93 {
94 	return FSL_DIU_PORT_DVI;
95 }
96 
97 #endif
98 
99 void __init p1022_rdk_pic_init(void)
100 {
101 	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
102 		MPIC_SINGLE_DEST_CPU,
103 		0, 256, " OpenPIC  ");
104 	BUG_ON(mpic == NULL);
105 	mpic_init(mpic);
106 }
107 
108 /*
109  * Setup the architecture
110  */
111 static void __init p1022_rdk_setup_arch(void)
112 {
113 	if (ppc_md.progress)
114 		ppc_md.progress("p1022_rdk_setup_arch()", 0);
115 
116 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
117 	diu_ops.set_pixel_clock		= p1022rdk_set_pixel_clock;
118 	diu_ops.valid_monitor_port	= p1022rdk_valid_monitor_port;
119 #endif
120 
121 	mpc85xx_smp_init();
122 
123 	fsl_pci_assign_primary();
124 
125 	swiotlb_detect_4g();
126 
127 	pr_info("Freescale / iVeia P1022 RDK reference board\n");
128 }
129 
130 machine_arch_initcall(p1022_rdk, mpc85xx_common_publish_devices);
131 
132 define_machine(p1022_rdk) {
133 	.name			= "P1022 RDK",
134 	.compatible		= "fsl,p1022rdk",
135 	.setup_arch		= p1022_rdk_setup_arch,
136 	.init_IRQ		= p1022_rdk_pic_init,
137 #ifdef CONFIG_PCI
138 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
139 	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
140 #endif
141 	.get_irq		= mpic_get_irq,
142 	.progress		= udbg_progress,
143 };
144