1 /*
2  * Copyright (C) 2006-2010, 2012-2013 Freescale Semiconductor, Inc.
3  * All rights reserved.
4  *
5  * Author: Andy Fleming <afleming@freescale.com>
6  *
7  * Based on 83xx/mpc8360e_pb.c by:
8  *	   Li Yang <LeoLi@freescale.com>
9  *	   Yin Olivia <Hong-hua.Yin@freescale.com>
10  *
11  * Description:
12  * MPC85xx MDS board specific routines.
13  *
14  * This program is free software; you can redistribute  it and/or modify it
15  * under  the terms of  the GNU General  Public License as published by the
16  * Free Software Foundation;  either version 2 of the  License, or (at your
17  * option) any later version.
18  */
19 
20 #include <linux/stddef.h>
21 #include <linux/kernel.h>
22 #include <linux/init.h>
23 #include <linux/errno.h>
24 #include <linux/reboot.h>
25 #include <linux/pci.h>
26 #include <linux/kdev_t.h>
27 #include <linux/major.h>
28 #include <linux/console.h>
29 #include <linux/delay.h>
30 #include <linux/seq_file.h>
31 #include <linux/initrd.h>
32 #include <linux/fsl_devices.h>
33 #include <linux/of_platform.h>
34 #include <linux/of_device.h>
35 #include <linux/phy.h>
36 #include <linux/memblock.h>
37 #include <linux/fsl/guts.h>
38 
39 #include <linux/atomic.h>
40 #include <asm/time.h>
41 #include <asm/io.h>
42 #include <asm/machdep.h>
43 #include <asm/pci-bridge.h>
44 #include <asm/irq.h>
45 #include <mm/mmu_decl.h>
46 #include <asm/prom.h>
47 #include <asm/udbg.h>
48 #include <sysdev/fsl_soc.h>
49 #include <sysdev/fsl_pci.h>
50 #include <sysdev/simple_gpio.h>
51 #include <soc/fsl/qe/qe.h>
52 #include <soc/fsl/qe/qe_ic.h>
53 #include <asm/mpic.h>
54 #include <asm/swiotlb.h>
55 #include "smp.h"
56 
57 #include "mpc85xx.h"
58 
59 #undef DEBUG
60 #ifdef DEBUG
61 #define DBG(fmt...) udbg_printf(fmt)
62 #else
63 #define DBG(fmt...)
64 #endif
65 
66 #define MV88E1111_SCR	0x10
67 #define MV88E1111_SCR_125CLK	0x0010
68 static int mpc8568_fixup_125_clock(struct phy_device *phydev)
69 {
70 	int scr;
71 	int err;
72 
73 	/* Workaround for the 125 CLK Toggle */
74 	scr = phy_read(phydev, MV88E1111_SCR);
75 
76 	if (scr < 0)
77 		return scr;
78 
79 	err = phy_write(phydev, MV88E1111_SCR, scr & ~(MV88E1111_SCR_125CLK));
80 
81 	if (err)
82 		return err;
83 
84 	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
85 
86 	if (err)
87 		return err;
88 
89 	scr = phy_read(phydev, MV88E1111_SCR);
90 
91 	if (scr < 0)
92 		return scr;
93 
94 	err = phy_write(phydev, MV88E1111_SCR, scr | 0x0008);
95 
96 	return err;
97 }
98 
99 static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
100 {
101 	int temp;
102 	int err;
103 
104 	/* Errata */
105 	err = phy_write(phydev,29, 0x0006);
106 
107 	if (err)
108 		return err;
109 
110 	temp = phy_read(phydev, 30);
111 
112 	if (temp < 0)
113 		return temp;
114 
115 	temp = (temp & (~0x8000)) | 0x4000;
116 	err = phy_write(phydev,30, temp);
117 
118 	if (err)
119 		return err;
120 
121 	err = phy_write(phydev,29, 0x000a);
122 
123 	if (err)
124 		return err;
125 
126 	temp = phy_read(phydev, 30);
127 
128 	if (temp < 0)
129 		return temp;
130 
131 	temp = phy_read(phydev, 30);
132 
133 	if (temp < 0)
134 		return temp;
135 
136 	temp &= ~0x0020;
137 
138 	err = phy_write(phydev,30,temp);
139 
140 	if (err)
141 		return err;
142 
143 	/* Disable automatic MDI/MDIX selection */
144 	temp = phy_read(phydev, 16);
145 
146 	if (temp < 0)
147 		return temp;
148 
149 	temp &= ~0x0060;
150 	err = phy_write(phydev,16,temp);
151 
152 	return err;
153 }
154 
155 /* ************************************************************************
156  *
157  * Setup the architecture
158  *
159  */
160 #ifdef CONFIG_QUICC_ENGINE
161 static void __init mpc85xx_mds_reset_ucc_phys(void)
162 {
163 	struct device_node *np;
164 	static u8 __iomem *bcsr_regs;
165 
166 	/* Map BCSR area */
167 	np = of_find_node_by_name(NULL, "bcsr");
168 	if (!np)
169 		return;
170 
171 	bcsr_regs = of_iomap(np, 0);
172 	of_node_put(np);
173 	if (!bcsr_regs)
174 		return;
175 
176 	if (machine_is(mpc8568_mds)) {
177 #define BCSR_UCC1_GETH_EN	(0x1 << 7)
178 #define BCSR_UCC2_GETH_EN	(0x1 << 7)
179 #define BCSR_UCC1_MODE_MSK	(0x3 << 4)
180 #define BCSR_UCC2_MODE_MSK	(0x3 << 0)
181 
182 		/* Turn off UCC1 & UCC2 */
183 		clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
184 		clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
185 
186 		/* Mode is RGMII, all bits clear */
187 		clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
188 					 BCSR_UCC2_MODE_MSK);
189 
190 		/* Turn UCC1 & UCC2 on */
191 		setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
192 		setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
193 	} else if (machine_is(mpc8569_mds)) {
194 #define BCSR7_UCC12_GETHnRST	(0x1 << 2)
195 #define BCSR8_UEM_MARVELL_RST	(0x1 << 1)
196 #define BCSR_UCC_RGMII		(0x1 << 6)
197 #define BCSR_UCC_RTBI		(0x1 << 5)
198 		/*
199 		 * U-Boot mangles interrupt polarity for Marvell PHYs,
200 		 * so reset built-in and UEM Marvell PHYs, this puts
201 		 * the PHYs into their normal state.
202 		 */
203 		clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
204 		setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
205 
206 		setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
207 		clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
208 
209 		for_each_compatible_node(np, "network", "ucc_geth") {
210 			const unsigned int *prop;
211 			int ucc_num;
212 
213 			prop = of_get_property(np, "cell-index", NULL);
214 			if (prop == NULL)
215 				continue;
216 
217 			ucc_num = *prop - 1;
218 
219 			prop = of_get_property(np, "phy-connection-type", NULL);
220 			if (prop == NULL)
221 				continue;
222 
223 			if (strcmp("rtbi", (const char *)prop) == 0)
224 				clrsetbits_8(&bcsr_regs[7 + ucc_num],
225 					BCSR_UCC_RGMII, BCSR_UCC_RTBI);
226 		}
227 	} else if (machine_is(p1021_mds)) {
228 #define BCSR11_ENET_MICRST     (0x1 << 5)
229 		/* Reset Micrel PHY */
230 		clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
231 		setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
232 	}
233 
234 	iounmap(bcsr_regs);
235 }
236 
237 static void __init mpc85xx_mds_qe_init(void)
238 {
239 	struct device_node *np;
240 
241 	mpc85xx_qe_init();
242 	mpc85xx_qe_par_io_init();
243 	mpc85xx_mds_reset_ucc_phys();
244 
245 	if (machine_is(p1021_mds)) {
246 
247 		struct ccsr_guts __iomem *guts;
248 
249 		np = of_find_node_by_name(NULL, "global-utilities");
250 		if (np) {
251 			guts = of_iomap(np, 0);
252 			if (!guts)
253 				pr_err("mpc85xx-rdb: could not map global utilities register\n");
254 			else{
255 			/* P1021 has pins muxed for QE and other functions. To
256 			 * enable QE UEC mode, we need to set bit QE0 for UCC1
257 			 * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
258 			 * and QE12 for QE MII management signals in PMUXCR
259 			 * register.
260 			 */
261 				setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) |
262 						  MPC85xx_PMUXCR_QE(3) |
263 						  MPC85xx_PMUXCR_QE(9) |
264 						  MPC85xx_PMUXCR_QE(12));
265 				iounmap(guts);
266 			}
267 			of_node_put(np);
268 		}
269 
270 	}
271 }
272 
273 static void __init mpc85xx_mds_qeic_init(void)
274 {
275 	struct device_node *np;
276 
277 	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
278 	if (!of_device_is_available(np)) {
279 		of_node_put(np);
280 		return;
281 	}
282 
283 	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
284 	if (!np) {
285 		np = of_find_node_by_type(NULL, "qeic");
286 		if (!np)
287 			return;
288 	}
289 
290 	if (machine_is(p1021_mds))
291 		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
292 				qe_ic_cascade_high_mpic);
293 	else
294 		qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
295 	of_node_put(np);
296 }
297 #else
298 static void __init mpc85xx_mds_qe_init(void) { }
299 static void __init mpc85xx_mds_qeic_init(void) { }
300 #endif	/* CONFIG_QUICC_ENGINE */
301 
302 static void __init mpc85xx_mds_setup_arch(void)
303 {
304 	if (ppc_md.progress)
305 		ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
306 
307 	mpc85xx_smp_init();
308 
309 	mpc85xx_mds_qe_init();
310 
311 	fsl_pci_assign_primary();
312 
313 	swiotlb_detect_4g();
314 }
315 
316 
317 static int __init board_fixups(void)
318 {
319 	char phy_id[20];
320 	char *compstrs[2] = {"fsl,gianfar-mdio", "fsl,ucc-mdio"};
321 	struct device_node *mdio;
322 	struct resource res;
323 	int i;
324 
325 	for (i = 0; i < ARRAY_SIZE(compstrs); i++) {
326 		mdio = of_find_compatible_node(NULL, NULL, compstrs[i]);
327 
328 		of_address_to_resource(mdio, 0, &res);
329 		snprintf(phy_id, sizeof(phy_id), "%llx:%02x",
330 			(unsigned long long)res.start, 1);
331 
332 		phy_register_fixup_for_id(phy_id, mpc8568_fixup_125_clock);
333 		phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
334 
335 		/* Register a workaround for errata */
336 		snprintf(phy_id, sizeof(phy_id), "%llx:%02x",
337 			(unsigned long long)res.start, 7);
338 		phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
339 
340 		of_node_put(mdio);
341 	}
342 
343 	return 0;
344 }
345 machine_arch_initcall(mpc8568_mds, board_fixups);
346 machine_arch_initcall(mpc8569_mds, board_fixups);
347 
348 static int __init mpc85xx_publish_devices(void)
349 {
350 	if (machine_is(mpc8568_mds))
351 		simple_gpiochip_init("fsl,mpc8568mds-bcsr-gpio");
352 	if (machine_is(mpc8569_mds))
353 		simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
354 
355 	return mpc85xx_common_publish_devices();
356 }
357 
358 machine_arch_initcall(mpc8568_mds, mpc85xx_publish_devices);
359 machine_arch_initcall(mpc8569_mds, mpc85xx_publish_devices);
360 machine_arch_initcall(p1021_mds, mpc85xx_common_publish_devices);
361 
362 machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
363 machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
364 machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier);
365 
366 static void __init mpc85xx_mds_pic_init(void)
367 {
368 	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
369 			MPIC_SINGLE_DEST_CPU,
370 			0, 256, " OpenPIC  ");
371 	BUG_ON(mpic == NULL);
372 
373 	mpic_init(mpic);
374 	mpc85xx_mds_qeic_init();
375 }
376 
377 static int __init mpc85xx_mds_probe(void)
378 {
379 	return of_machine_is_compatible("MPC85xxMDS");
380 }
381 
382 define_machine(mpc8568_mds) {
383 	.name		= "MPC8568 MDS",
384 	.probe		= mpc85xx_mds_probe,
385 	.setup_arch	= mpc85xx_mds_setup_arch,
386 	.init_IRQ	= mpc85xx_mds_pic_init,
387 	.get_irq	= mpic_get_irq,
388 	.restart	= fsl_rstcr_restart,
389 	.calibrate_decr	= generic_calibrate_decr,
390 	.progress	= udbg_progress,
391 #ifdef CONFIG_PCI
392 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
393 	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
394 #endif
395 };
396 
397 static int __init mpc8569_mds_probe(void)
398 {
399 	return of_machine_is_compatible("fsl,MPC8569EMDS");
400 }
401 
402 define_machine(mpc8569_mds) {
403 	.name		= "MPC8569 MDS",
404 	.probe		= mpc8569_mds_probe,
405 	.setup_arch	= mpc85xx_mds_setup_arch,
406 	.init_IRQ	= mpc85xx_mds_pic_init,
407 	.get_irq	= mpic_get_irq,
408 	.restart	= fsl_rstcr_restart,
409 	.calibrate_decr	= generic_calibrate_decr,
410 	.progress	= udbg_progress,
411 #ifdef CONFIG_PCI
412 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
413 	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
414 #endif
415 };
416 
417 static int __init p1021_mds_probe(void)
418 {
419 	return of_machine_is_compatible("fsl,P1021MDS");
420 
421 }
422 
423 define_machine(p1021_mds) {
424 	.name		= "P1021 MDS",
425 	.probe		= p1021_mds_probe,
426 	.setup_arch	= mpc85xx_mds_setup_arch,
427 	.init_IRQ	= mpc85xx_mds_pic_init,
428 	.get_irq	= mpic_get_irq,
429 	.restart	= fsl_rstcr_restart,
430 	.calibrate_decr	= generic_calibrate_decr,
431 	.progress	= udbg_progress,
432 #ifdef CONFIG_PCI
433 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
434 	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
435 #endif
436 };
437 
438