1 /* 2 * Board setup routines for the Emerson KSI8560 3 * 4 * Author: Alexandr Smirnov <asmirnov@ru.mvista.com> 5 * 6 * Based on mpc85xx_ads.c maintained by Kumar Gala 7 * 8 * 2008 (c) MontaVista, Software, Inc. This file is licensed under 9 * the terms of the GNU General Public License version 2. This program 10 * is licensed "as is" without any warranty of any kind, whether express 11 * or implied. 12 * 13 */ 14 15 #include <linux/stddef.h> 16 #include <linux/kernel.h> 17 #include <linux/pci.h> 18 #include <linux/kdev_t.h> 19 #include <linux/delay.h> 20 #include <linux/seq_file.h> 21 #include <linux/of_platform.h> 22 23 #include <asm/time.h> 24 #include <asm/machdep.h> 25 #include <asm/pci-bridge.h> 26 #include <asm/mpic.h> 27 #include <mm/mmu_decl.h> 28 #include <asm/udbg.h> 29 #include <asm/prom.h> 30 31 #include <sysdev/fsl_soc.h> 32 #include <sysdev/fsl_pci.h> 33 34 #include <asm/cpm2.h> 35 #include <sysdev/cpm2_pic.h> 36 37 #include "mpc85xx.h" 38 39 #define KSI8560_CPLD_HVR 0x04 /* Hardware Version Register */ 40 #define KSI8560_CPLD_PVR 0x08 /* PLD Version Register */ 41 #define KSI8560_CPLD_RCR1 0x30 /* Reset Command Register 1 */ 42 43 #define KSI8560_CPLD_RCR1_CPUHR 0x80 /* CPU Hard Reset */ 44 45 static void __iomem *cpld_base = NULL; 46 47 static void machine_restart(char *cmd) 48 { 49 if (cpld_base) 50 out_8(cpld_base + KSI8560_CPLD_RCR1, KSI8560_CPLD_RCR1_CPUHR); 51 else 52 printk(KERN_ERR "Can't find CPLD base, hang forever\n"); 53 54 for (;;); 55 } 56 57 static void __init ksi8560_pic_init(void) 58 { 59 struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 60 0, 256, " OpenPIC "); 61 BUG_ON(mpic == NULL); 62 mpic_init(mpic); 63 64 mpc85xx_cpm2_pic_init(); 65 } 66 67 #ifdef CONFIG_CPM2 68 /* 69 * Setup I/O ports 70 */ 71 struct cpm_pin { 72 int port, pin, flags; 73 }; 74 75 static struct cpm_pin __initdata ksi8560_pins[] = { 76 /* SCC1 */ 77 {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, 78 {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, 79 {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, 80 81 /* SCC2 */ 82 {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, 83 {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, 84 {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, 85 86 /* FCC1 */ 87 {0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, 88 {0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, 89 {0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, 90 {0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, 91 {0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, 92 {0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, 93 {0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, 94 {0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, 95 {0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, 96 {0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, 97 {0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, 98 {0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, 99 {0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, 100 {0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, 101 {2, 23, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK9 */ 102 {2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK10 */ 103 104 }; 105 106 static void __init init_ioports(void) 107 { 108 int i; 109 110 for (i = 0; i < ARRAY_SIZE(ksi8560_pins); i++) { 111 struct cpm_pin *pin = &ksi8560_pins[i]; 112 cpm2_set_pin(pin->port, pin->pin, pin->flags); 113 } 114 115 cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX); 116 cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX); 117 cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX); 118 cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX); 119 cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK9, CPM_CLK_RX); 120 cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX); 121 } 122 #endif 123 124 /* 125 * Setup the architecture 126 */ 127 static void __init ksi8560_setup_arch(void) 128 { 129 struct device_node *cpld; 130 131 cpld = of_find_compatible_node(NULL, NULL, "emerson,KSI8560-cpld"); 132 if (cpld) 133 cpld_base = of_iomap(cpld, 0); 134 else 135 printk(KERN_ERR "Can't find CPLD in device tree\n"); 136 137 if (ppc_md.progress) 138 ppc_md.progress("ksi8560_setup_arch()", 0); 139 140 #ifdef CONFIG_CPM2 141 cpm2_reset(); 142 init_ioports(); 143 #endif 144 } 145 146 static void ksi8560_show_cpuinfo(struct seq_file *m) 147 { 148 uint pvid, svid, phid1; 149 150 pvid = mfspr(SPRN_PVR); 151 svid = mfspr(SPRN_SVR); 152 153 seq_printf(m, "Vendor\t\t: Emerson Network Power\n"); 154 seq_printf(m, "Board\t\t: KSI8560\n"); 155 156 if (cpld_base) { 157 seq_printf(m, "Hardware rev\t: %d\n", 158 in_8(cpld_base + KSI8560_CPLD_HVR)); 159 seq_printf(m, "CPLD rev\t: %d\n", 160 in_8(cpld_base + KSI8560_CPLD_PVR)); 161 } else 162 seq_printf(m, "Unknown Hardware and CPLD revs\n"); 163 164 seq_printf(m, "PVR\t\t: 0x%x\n", pvid); 165 seq_printf(m, "SVR\t\t: 0x%x\n", svid); 166 167 /* Display cpu Pll setting */ 168 phid1 = mfspr(SPRN_HID1); 169 seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); 170 } 171 172 machine_device_initcall(ksi8560, mpc85xx_common_publish_devices); 173 174 /* 175 * Called very early, device-tree isn't unflattened 176 */ 177 static int __init ksi8560_probe(void) 178 { 179 unsigned long root = of_get_flat_dt_root(); 180 181 return of_flat_dt_is_compatible(root, "emerson,KSI8560"); 182 } 183 184 define_machine(ksi8560) { 185 .name = "KSI8560", 186 .probe = ksi8560_probe, 187 .setup_arch = ksi8560_setup_arch, 188 .init_IRQ = ksi8560_pic_init, 189 .show_cpuinfo = ksi8560_show_cpuinfo, 190 .get_irq = mpic_get_irq, 191 .restart = machine_restart, 192 .calibrate_decr = generic_calibrate_decr, 193 }; 194