1menuconfig FSL_SOC_BOOKE 2 bool "Freescale Book-E Machine Type" 3 depends on PPC_85xx || PPC_BOOK3E 4 select FSL_SOC 5 select PPC_UDBG_16550 6 select MPIC 7 select PPC_PCI_CHOICE 8 select FSL_PCI if PCI 9 select SERIAL_8250_EXTENDED if SERIAL_8250 10 select SERIAL_8250_SHARE_IRQ if SERIAL_8250 11 default y 12 13if FSL_SOC_BOOKE 14 15if PPC32 16 17config FSL_85XX_CACHE_SRAM 18 bool 19 select PPC_LIB_RHEAP 20 help 21 When selected, this option enables cache-sram support 22 for memory allocation on P1/P2 QorIQ platforms. 23 cache-sram-size and cache-sram-offset kernel boot 24 parameters should be passed when this option is enabled. 25 26config BSC9131_RDB 27 bool "Freescale BSC9131RDB" 28 select DEFAULT_UIMAGE 29 help 30 This option enables support for the Freescale BSC9131RDB board. 31 The BSC9131 is a heterogeneous SoC containing an e500v2 powerpc and a 32 StarCore SC3850 DSP 33 Manufacturer : Freescale Semiconductor, Inc 34 35config C293_PCIE 36 bool "Freescale C293PCIE" 37 select DEFAULT_UIMAGE 38 help 39 This option enables support for the C293PCIE board 40 41config MPC8540_ADS 42 bool "Freescale MPC8540 ADS" 43 select DEFAULT_UIMAGE 44 help 45 This option enables support for the MPC 8540 ADS board 46 47config MPC8560_ADS 48 bool "Freescale MPC8560 ADS" 49 select DEFAULT_UIMAGE 50 select CPM2 51 help 52 This option enables support for the MPC 8560 ADS board 53 54config MPC85xx_CDS 55 bool "Freescale MPC85xx CDS" 56 select DEFAULT_UIMAGE 57 select PPC_I8259 58 select HAS_RAPIDIO 59 help 60 This option enables support for the MPC85xx CDS board 61 62config MPC85xx_MDS 63 bool "Freescale MPC85xx MDS" 64 select DEFAULT_UIMAGE 65 select PHYLIB 66 select HAS_RAPIDIO 67 select SWIOTLB 68 help 69 This option enables support for the MPC85xx MDS board 70 71config MPC8536_DS 72 bool "Freescale MPC8536 DS" 73 select DEFAULT_UIMAGE 74 select SWIOTLB 75 help 76 This option enables support for the MPC8536 DS board 77 78config MPC85xx_DS 79 bool "Freescale MPC85xx DS" 80 select PPC_I8259 81 select DEFAULT_UIMAGE 82 select FSL_ULI1575 if PCI 83 select SWIOTLB 84 help 85 This option enables support for the MPC85xx DS (MPC8544 DS) board 86 87config MPC85xx_RDB 88 bool "Freescale MPC85xx RDB" 89 select PPC_I8259 90 select DEFAULT_UIMAGE 91 select FSL_ULI1575 if PCI 92 select SWIOTLB 93 help 94 This option enables support for the MPC85xx RDB (P2020 RDB) board 95 96config P1010_RDB 97 bool "Freescale P1010RDB" 98 select DEFAULT_UIMAGE 99 help 100 This option enables support for the MPC85xx RDB (P1010 RDB) board 101 102 P1010RDB contains P1010Si, which provides CPU performance up to 800 103 MHz and 1600 DMIPS, additional functionality and faster interfaces 104 (DDR3/3L, SATA II, and PCI Express). 105 106config P1022_DS 107 bool "Freescale P1022 DS" 108 select DEFAULT_UIMAGE 109 select SWIOTLB 110 help 111 This option enables support for the Freescale P1022DS reference board. 112 113config P1022_RDK 114 bool "Freescale / iVeia P1022 RDK" 115 select DEFAULT_UIMAGE 116 help 117 This option enables support for the Freescale / iVeia P1022RDK 118 reference board. 119 120config P1023_RDS 121 bool "Freescale P1023 RDS/RDB" 122 select DEFAULT_UIMAGE 123 help 124 This option enables support for the P1023 RDS and RDB boards 125 126config SOCRATES 127 bool "Socrates" 128 select DEFAULT_UIMAGE 129 help 130 This option enables support for the Socrates board. 131 132config KSI8560 133 bool "Emerson KSI8560" 134 select DEFAULT_UIMAGE 135 help 136 This option enables support for the Emerson KSI8560 board 137 138config XES_MPC85xx 139 bool "X-ES single-board computer" 140 select DEFAULT_UIMAGE 141 help 142 This option enables support for the various single-board 143 computers from Extreme Engineering Solutions (X-ES) based on 144 Freescale MPC85xx processors. 145 Manufacturer: Extreme Engineering Solutions, Inc. 146 URL: <http://www.xes-inc.com/> 147 148config STX_GP3 149 bool "Silicon Turnkey Express GP3" 150 help 151 This option enables support for the Silicon Turnkey Express GP3 152 board. 153 select CPM2 154 select DEFAULT_UIMAGE 155 156config TQM8540 157 bool "TQ Components TQM8540" 158 help 159 This option enables support for the TQ Components TQM8540 board. 160 select DEFAULT_UIMAGE 161 select TQM85xx 162 163config TQM8541 164 bool "TQ Components TQM8541" 165 help 166 This option enables support for the TQ Components TQM8541 board. 167 select DEFAULT_UIMAGE 168 select TQM85xx 169 select CPM2 170 171config TQM8548 172 bool "TQ Components TQM8548" 173 help 174 This option enables support for the TQ Components TQM8548 board. 175 select DEFAULT_UIMAGE 176 select TQM85xx 177 178config TQM8555 179 bool "TQ Components TQM8555" 180 help 181 This option enables support for the TQ Components TQM8555 board. 182 select DEFAULT_UIMAGE 183 select TQM85xx 184 select CPM2 185 186config TQM8560 187 bool "TQ Components TQM8560" 188 help 189 This option enables support for the TQ Components TQM8560 board. 190 select DEFAULT_UIMAGE 191 select TQM85xx 192 select CPM2 193 194config SBC8548 195 bool "Wind River SBC8548" 196 select DEFAULT_UIMAGE 197 help 198 This option enables support for the Wind River SBC8548 board 199 200config PPA8548 201 bool "Prodrive PPA8548" 202 help 203 This option enables support for the Prodrive PPA8548 board. 204 select DEFAULT_UIMAGE 205 select HAS_RAPIDIO 206 207config GE_IMP3A 208 bool "GE Intelligent Platforms IMP3A" 209 select DEFAULT_UIMAGE 210 select SWIOTLB 211 select MMIO_NVRAM 212 select ARCH_REQUIRE_GPIOLIB 213 select GE_FPGA 214 help 215 This option enables support for the GE Intelligent Platforms IMP3A 216 board. 217 218 This board is a 3U CompactPCI Single Board Computer with a Freescale 219 P2020 processor. 220 221config P2041_RDB 222 bool "Freescale P2041 RDB" 223 select DEFAULT_UIMAGE 224 select PPC_E500MC 225 select PHYS_64BIT 226 select SWIOTLB 227 select ARCH_REQUIRE_GPIOLIB 228 select GPIO_MPC8XXX 229 select HAS_RAPIDIO 230 select PPC_EPAPR_HV_PIC 231 help 232 This option enables support for the P2041 RDB board 233 234config P3041_DS 235 bool "Freescale P3041 DS" 236 select DEFAULT_UIMAGE 237 select PPC_E500MC 238 select PHYS_64BIT 239 select SWIOTLB 240 select ARCH_REQUIRE_GPIOLIB 241 select GPIO_MPC8XXX 242 select HAS_RAPIDIO 243 select PPC_EPAPR_HV_PIC 244 help 245 This option enables support for the P3041 DS board 246 247config P4080_DS 248 bool "Freescale P4080 DS" 249 select DEFAULT_UIMAGE 250 select PPC_E500MC 251 select PHYS_64BIT 252 select SWIOTLB 253 select ARCH_REQUIRE_GPIOLIB 254 select GPIO_MPC8XXX 255 select HAS_RAPIDIO 256 select PPC_EPAPR_HV_PIC 257 help 258 This option enables support for the P4080 DS board 259 260config SGY_CTS1000 261 tristate "Servergy CTS-1000 support" 262 select GPIOLIB 263 select OF_GPIO 264 depends on P4080_DS 265 help 266 Enable this to support functionality in Servergy's CTS-1000 systems. 267 268endif # PPC32 269 270config P5020_DS 271 bool "Freescale P5020 DS" 272 select DEFAULT_UIMAGE 273 select E500 274 select PPC_E500MC 275 select PHYS_64BIT 276 select SWIOTLB 277 select ARCH_REQUIRE_GPIOLIB 278 select GPIO_MPC8XXX 279 select HAS_RAPIDIO 280 select PPC_EPAPR_HV_PIC 281 help 282 This option enables support for the P5020 DS board 283 284config P5040_DS 285 bool "Freescale P5040 DS" 286 select DEFAULT_UIMAGE 287 select E500 288 select PPC_E500MC 289 select PHYS_64BIT 290 select SWIOTLB 291 select ARCH_REQUIRE_GPIOLIB 292 select GPIO_MPC8XXX 293 select HAS_RAPIDIO 294 select PPC_EPAPR_HV_PIC 295 help 296 This option enables support for the P5040 DS board 297 298config PPC_QEMU_E500 299 bool "QEMU generic e500 platform" 300 select DEFAULT_UIMAGE 301 help 302 This option enables support for running as a QEMU guest using 303 QEMU's generic e500 machine. This is not required if you're 304 using a QEMU machine that targets a specific board, such as 305 mpc8544ds. 306 307 Unlike most e500 boards that target a specific CPU, this 308 platform works with any e500-family CPU that QEMU supports. 309 Thus, you'll need to make sure CONFIG_PPC_E500MC is set or 310 unset based on the emulated CPU (or actual host CPU in the case 311 of KVM). 312 313if PPC64 314 315config T4240_QDS 316 bool "Freescale T4240 QDS" 317 select DEFAULT_UIMAGE 318 select E500 319 select PPC_E500MC 320 select PHYS_64BIT 321 select SWIOTLB 322 select ARCH_REQUIRE_GPIOLIB 323 select GPIO_MPC8XXX 324 select HAS_RAPIDIO 325 select PPC_EPAPR_HV_PIC 326 help 327 This option enables support for the T4240 QDS board 328 329config B4_QDS 330 bool "Freescale B4 QDS" 331 select DEFAULT_UIMAGE 332 select E500 333 select PPC_E500MC 334 select PHYS_64BIT 335 select SWIOTLB 336 select GPIOLIB 337 select ARCH_REQUIRE_GPIOLIB 338 select HAS_RAPIDIO 339 select PPC_EPAPR_HV_PIC 340 help 341 This option enables support for the B4 QDS board 342 The B4 application development system B4 QDS is a complete 343 debugging environment intended for engineers developing 344 applications for the B4. 345 346endif 347endif # FSL_SOC_BOOKE 348 349config TQM85xx 350 bool 351