1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Power Management and GPIO expander driver for MPC8349E-mITX-compatible MCU 4 * 5 * Copyright (c) 2008 MontaVista Software, Inc. 6 * 7 * Author: Anton Vorontsov <avorontsov@ru.mvista.com> 8 */ 9 10 #include <linux/kernel.h> 11 #include <linux/module.h> 12 #include <linux/device.h> 13 #include <linux/mutex.h> 14 #include <linux/i2c.h> 15 #include <linux/gpio/driver.h> 16 #include <linux/of.h> 17 #include <linux/of_gpio.h> 18 #include <linux/slab.h> 19 #include <linux/kthread.h> 20 #include <linux/reboot.h> 21 #include <asm/prom.h> 22 #include <asm/machdep.h> 23 24 /* 25 * I don't have specifications for the MCU firmware, I found this register 26 * and bits positions by the trial&error method. 27 */ 28 #define MCU_REG_CTRL 0x20 29 #define MCU_CTRL_POFF 0x40 30 #define MCU_CTRL_BTN 0x80 31 32 #define MCU_NUM_GPIO 2 33 34 struct mcu { 35 struct mutex lock; 36 struct i2c_client *client; 37 struct gpio_chip gc; 38 u8 reg_ctrl; 39 }; 40 41 static struct mcu *glob_mcu; 42 43 struct task_struct *shutdown_thread; 44 static int shutdown_thread_fn(void *data) 45 { 46 int ret; 47 struct mcu *mcu = glob_mcu; 48 49 while (!kthread_should_stop()) { 50 ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL); 51 if (ret < 0) 52 pr_err("MCU status reg read failed.\n"); 53 mcu->reg_ctrl = ret; 54 55 56 if (mcu->reg_ctrl & MCU_CTRL_BTN) { 57 i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL, 58 mcu->reg_ctrl & ~MCU_CTRL_BTN); 59 60 ctrl_alt_del(); 61 } 62 63 set_current_state(TASK_INTERRUPTIBLE); 64 schedule_timeout(HZ); 65 } 66 67 return 0; 68 } 69 70 static ssize_t show_status(struct device *d, 71 struct device_attribute *attr, char *buf) 72 { 73 int ret; 74 struct mcu *mcu = glob_mcu; 75 76 ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL); 77 if (ret < 0) 78 return -ENODEV; 79 mcu->reg_ctrl = ret; 80 81 return sprintf(buf, "%02x\n", ret); 82 } 83 static DEVICE_ATTR(status, 0444, show_status, NULL); 84 85 static void mcu_power_off(void) 86 { 87 struct mcu *mcu = glob_mcu; 88 89 pr_info("Sending power-off request to the MCU...\n"); 90 mutex_lock(&mcu->lock); 91 i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL, 92 mcu->reg_ctrl | MCU_CTRL_POFF); 93 mutex_unlock(&mcu->lock); 94 } 95 96 static void mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) 97 { 98 struct mcu *mcu = gpiochip_get_data(gc); 99 u8 bit = 1 << (4 + gpio); 100 101 mutex_lock(&mcu->lock); 102 if (val) 103 mcu->reg_ctrl &= ~bit; 104 else 105 mcu->reg_ctrl |= bit; 106 107 i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL, mcu->reg_ctrl); 108 mutex_unlock(&mcu->lock); 109 } 110 111 static int mcu_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) 112 { 113 mcu_gpio_set(gc, gpio, val); 114 return 0; 115 } 116 117 static int mcu_gpiochip_add(struct mcu *mcu) 118 { 119 struct device_node *np; 120 struct gpio_chip *gc = &mcu->gc; 121 122 np = of_find_compatible_node(NULL, NULL, "fsl,mcu-mpc8349emitx"); 123 if (!np) 124 return -ENODEV; 125 126 gc->owner = THIS_MODULE; 127 gc->label = kasprintf(GFP_KERNEL, "%pOF", np); 128 gc->can_sleep = 1; 129 gc->ngpio = MCU_NUM_GPIO; 130 gc->base = -1; 131 gc->set = mcu_gpio_set; 132 gc->direction_output = mcu_gpio_dir_out; 133 gc->of_node = np; 134 135 return gpiochip_add_data(gc, mcu); 136 } 137 138 static int mcu_gpiochip_remove(struct mcu *mcu) 139 { 140 kfree(mcu->gc.label); 141 gpiochip_remove(&mcu->gc); 142 return 0; 143 } 144 145 static int mcu_probe(struct i2c_client *client) 146 { 147 struct mcu *mcu; 148 int ret; 149 150 mcu = kzalloc(sizeof(*mcu), GFP_KERNEL); 151 if (!mcu) 152 return -ENOMEM; 153 154 mutex_init(&mcu->lock); 155 mcu->client = client; 156 i2c_set_clientdata(client, mcu); 157 158 ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL); 159 if (ret < 0) 160 goto err; 161 mcu->reg_ctrl = ret; 162 163 ret = mcu_gpiochip_add(mcu); 164 if (ret) 165 goto err; 166 167 /* XXX: this is potentially racy, but there is no lock for pm_power_off */ 168 if (!pm_power_off) { 169 glob_mcu = mcu; 170 pm_power_off = mcu_power_off; 171 dev_info(&client->dev, "will provide power-off service\n"); 172 } 173 174 if (device_create_file(&client->dev, &dev_attr_status)) 175 dev_err(&client->dev, 176 "couldn't create device file for status\n"); 177 178 shutdown_thread = kthread_run(shutdown_thread_fn, NULL, 179 "mcu-i2c-shdn"); 180 181 return 0; 182 err: 183 kfree(mcu); 184 return ret; 185 } 186 187 static int mcu_remove(struct i2c_client *client) 188 { 189 struct mcu *mcu = i2c_get_clientdata(client); 190 int ret; 191 192 kthread_stop(shutdown_thread); 193 194 device_remove_file(&client->dev, &dev_attr_status); 195 196 if (glob_mcu == mcu) { 197 pm_power_off = NULL; 198 glob_mcu = NULL; 199 } 200 201 ret = mcu_gpiochip_remove(mcu); 202 if (ret) 203 return ret; 204 kfree(mcu); 205 return 0; 206 } 207 208 static const struct i2c_device_id mcu_ids[] = { 209 { "mcu-mpc8349emitx", }, 210 {}, 211 }; 212 MODULE_DEVICE_TABLE(i2c, mcu_ids); 213 214 static const struct of_device_id mcu_of_match_table[] = { 215 { .compatible = "fsl,mcu-mpc8349emitx", }, 216 { }, 217 }; 218 219 static struct i2c_driver mcu_driver = { 220 .driver = { 221 .name = "mcu-mpc8349emitx", 222 .of_match_table = mcu_of_match_table, 223 }, 224 .probe_new = mcu_probe, 225 .remove = mcu_remove, 226 .id_table = mcu_ids, 227 }; 228 229 module_i2c_driver(mcu_driver); 230 231 MODULE_DESCRIPTION("Power Management and GPIO expander driver for " 232 "MPC8349E-mITX-compatible MCU"); 233 MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>"); 234 MODULE_LICENSE("GPL"); 235