1 /*
2  * Copyright 2008-2011 DENX Software Engineering GmbH
3  * Author: Heiko Schocher <hs@denx.de>
4  *
5  * Description:
6  * Keymile 83xx platform specific routines.
7  *
8  * This program is free software; you can redistribute it and/or modify it
9  * under  the terms of  the GNU General  Public License as published by the
10  * Free Software Foundation;  either version 2 of the  License, or (at your
11  * option) any later version.
12  */
13 
14 #include <linux/stddef.h>
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/errno.h>
18 #include <linux/reboot.h>
19 #include <linux/pci.h>
20 #include <linux/kdev_t.h>
21 #include <linux/major.h>
22 #include <linux/console.h>
23 #include <linux/delay.h>
24 #include <linux/seq_file.h>
25 #include <linux/root_dev.h>
26 #include <linux/initrd.h>
27 #include <linux/of_platform.h>
28 #include <linux/of_device.h>
29 
30 #include <linux/atomic.h>
31 #include <linux/time.h>
32 #include <linux/io.h>
33 #include <asm/machdep.h>
34 #include <asm/ipic.h>
35 #include <asm/irq.h>
36 #include <asm/prom.h>
37 #include <asm/udbg.h>
38 #include <sysdev/fsl_soc.h>
39 #include <sysdev/fsl_pci.h>
40 #include <soc/fsl/qe/qe.h>
41 #include <soc/fsl/qe/qe_ic.h>
42 
43 #include "mpc83xx.h"
44 
45 #define SVR_REV(svr)    (((svr) >>  0) & 0xFFFF) /* Revision field */
46 
47 static void quirk_mpc8360e_qe_enet10(void)
48 {
49 	/*
50 	 * handle mpc8360E Erratum QE_ENET10:
51 	 * RGMII AC values do not meet the specification
52 	 */
53 	uint svid = mfspr(SPRN_SVR);
54 	struct	device_node *np_par;
55 	struct	resource res;
56 	void	__iomem *base;
57 	int	ret;
58 
59 	np_par = of_find_node_by_name(NULL, "par_io");
60 	if (np_par == NULL) {
61 		pr_warn("%s couldn;t find par_io node\n", __func__);
62 		return;
63 	}
64 	/* Map Parallel I/O ports registers */
65 	ret = of_address_to_resource(np_par, 0, &res);
66 	if (ret) {
67 		pr_warn("%s couldn;t map par_io registers\n", __func__);
68 		return;
69 	}
70 
71 	base = ioremap(res.start, res.end - res.start + 1);
72 
73 	/*
74 	 * set output delay adjustments to default values according
75 	 * table 5 in Errata Rev. 5, 9/2011:
76 	 *
77 	 * write 0b01 to UCC1 bits 18:19
78 	 * write 0b01 to UCC2 option 1 bits 4:5
79 	 * write 0b01 to UCC2 option 2 bits 16:17
80 	 */
81 	clrsetbits_be32((base + 0xa8), 0x0c00f000, 0x04005000);
82 
83 	/*
84 	 * set output delay adjustments to default values according
85 	 * table 3-13 in Reference Manual Rev.3 05/2010:
86 	 *
87 	 * write 0b01 to UCC2 option 2 bits 16:17
88 	 * write 0b0101 to UCC1 bits 20:23
89 	 * write 0b0101 to UCC2 option 1 bits 24:27
90 	 */
91 	clrsetbits_be32((base + 0xac), 0x0000cff0, 0x00004550);
92 
93 	if (SVR_REV(svid) == 0x0021) {
94 		/*
95 		 * UCC2 option 1: write 0b1010 to bits 24:27
96 		 * at address IMMRBAR+0x14AC
97 		 */
98 		clrsetbits_be32((base + 0xac), 0x000000f0, 0x000000a0);
99 	} else if (SVR_REV(svid) == 0x0020) {
100 		/*
101 		 * UCC1: write 0b11 to bits 18:19
102 		 * at address IMMRBAR+0x14A8
103 		 */
104 		setbits32((base + 0xa8), 0x00003000);
105 
106 		/*
107 		 * UCC2 option 1: write 0b11 to bits 4:5
108 		 * at address IMMRBAR+0x14A8
109 		 */
110 		setbits32((base + 0xa8), 0x0c000000);
111 
112 		/*
113 		 * UCC2 option 2: write 0b11 to bits 16:17
114 		 * at address IMMRBAR+0x14AC
115 		 */
116 		setbits32((base + 0xac), 0x0000c000);
117 	}
118 	iounmap(base);
119 	of_node_put(np_par);
120 }
121 
122 /* ************************************************************************
123  *
124  * Setup the architecture
125  *
126  */
127 static void __init mpc83xx_km_setup_arch(void)
128 {
129 #ifdef CONFIG_QUICC_ENGINE
130 	struct device_node *np;
131 #endif
132 
133 	mpc83xx_setup_arch();
134 
135 #ifdef CONFIG_QUICC_ENGINE
136 	np = of_find_node_by_name(NULL, "par_io");
137 	if (np != NULL) {
138 		par_io_init(np);
139 		of_node_put(np);
140 
141 		for_each_node_by_name(np, "spi")
142 			par_io_of_config(np);
143 
144 		for_each_node_by_name(np, "ucc")
145 			par_io_of_config(np);
146 
147 		/* Only apply this quirk when par_io is available */
148 		np = of_find_compatible_node(NULL, "network", "ucc_geth");
149 		if (np != NULL) {
150 			quirk_mpc8360e_qe_enet10();
151 			of_node_put(np);
152 		}
153 	}
154 #endif	/* CONFIG_QUICC_ENGINE */
155 }
156 
157 machine_device_initcall(mpc83xx_km, mpc83xx_declare_of_platform_devices);
158 
159 /* list of the supported boards */
160 static char *board[] __initdata = {
161 	"Keymile,KMETER1",
162 	"Keymile,kmpbec8321",
163 	NULL
164 };
165 
166 /*
167  * Called very early, MMU is off, device-tree isn't unflattened
168  */
169 static int __init mpc83xx_km_probe(void)
170 {
171 	int i = 0;
172 
173 	while (board[i]) {
174 		if (of_machine_is_compatible(board[i]))
175 			break;
176 		i++;
177 	}
178 	return (board[i] != NULL);
179 }
180 
181 define_machine(mpc83xx_km) {
182 	.name		= "mpc83xx-km-platform",
183 	.probe		= mpc83xx_km_probe,
184 	.setup_arch	= mpc83xx_km_setup_arch,
185 	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
186 	.get_irq	= ipic_get_irq,
187 	.restart	= mpc83xx_restart,
188 	.time_init	= mpc83xx_time_init,
189 	.calibrate_decr	= generic_calibrate_decr,
190 	.progress	= udbg_progress,
191 };
192