1/* SPDX-License-Identifier: GPL-2.0 */
2#include <asm/reg.h>
3#include <asm/ppc_asm.h>
4#include <asm/processor.h>
5#include <asm/cache.h>
6
7
8#define SDRAM_CTRL	0x104
9#define SC_MODE_EN	(1<<31)
10#define SC_CKE		(1<<30)
11#define SC_REF_EN	(1<<28)
12#define SC_SOFT_PRE	(1<<1)
13
14#define GPIOW_GPIOE	0xc00
15#define GPIOW_DDR	0xc08
16#define GPIOW_DVO	0xc0c
17
18#define CDM_CE		0x214
19#define CDM_SDRAM	(1<<3)
20
21
22/* helpers... beware: r10 and r4 are overwritten */
23#define SAVE_SPRN(reg, addr)		\
24	mfspr	r10, SPRN_##reg;	\
25	stw	r10, ((addr)*4)(r4);
26
27#define LOAD_SPRN(reg, addr)		\
28	lwz	r10, ((addr)*4)(r4);	\
29	mtspr	SPRN_##reg, r10;	\
30	sync;				\
31	isync;
32
33
34	.data
35registers:
36	.space 0x5c*4
37	.text
38
39/* ---------------------------------------------------------------------- */
40/* low-power mode with help of M68HLC908QT1 */
41
42	.globl lite5200_low_power
43lite5200_low_power:
44
45	mr	r7, r3	/* save SRAM va */
46	mr	r8, r4	/* save MBAR va */
47
48	/* setup wakeup address for u-boot at physical location 0x0 */
49	lis	r3, CONFIG_KERNEL_START@h
50	lis	r4, lite5200_wakeup@h
51	ori	r4, r4, lite5200_wakeup@l
52	sub	r4, r4, r3
53	stw	r4, 0(r3)
54
55
56	/*
57	 * save stuff BDI overwrites
58	 * 0xf0 (0xe0->0x100 gets overwritten when BDI connected;
59	 *   even when CONFIG_BDI_SWITCH is disabled and MMU XLAT commented; heisenbug?))
60	 * WARNING: self-refresh doesn't seem to work when BDI2000 is connected,
61	 *   possibly because BDI sets SDRAM registers before wakeup code does
62	 */
63	lis	r4, registers@h
64	ori	r4, r4, registers@l
65	lwz	r10, 0xf0(r3)
66	stw	r10, (0x1d*4)(r4)
67
68	/* save registers to r4 [destroys r10] */
69	SAVE_SPRN(LR, 0x1c)
70	bl	save_regs
71
72	/* flush caches [destroys r3, r4] */
73	bl	flush_data_cache
74
75
76	/* copy code to sram */
77	mr	r4, r7
78	li	r3, (sram_code_end - sram_code)/4
79	mtctr	r3
80	lis	r3, sram_code@h
81	ori	r3, r3, sram_code@l
821:
83	lwz	r5, 0(r3)
84	stw	r5, 0(r4)
85	addi	r3, r3, 4
86	addi	r4, r4, 4
87	bdnz	1b
88
89	/* get tb_ticks_per_usec */
90	lis	r3, tb_ticks_per_usec@h
91	lwz	r11, tb_ticks_per_usec@l(r3)
92
93	/* disable I and D caches */
94	mfspr	r3, SPRN_HID0
95	ori	r3, r3, HID0_ICE | HID0_DCE
96	xori	r3, r3, HID0_ICE | HID0_DCE
97	sync; isync;
98	mtspr	SPRN_HID0, r3
99	sync; isync;
100
101	/* jump to sram */
102	mtlr	r7
103	blrl
104	/* doesn't return */
105
106
107sram_code:
108	/* self refresh */
109	lwz	r4, SDRAM_CTRL(r8)
110
111	/* send NOP (precharge) */
112	oris	r4, r4, SC_MODE_EN@h	/* mode_en */
113	stw	r4, SDRAM_CTRL(r8)
114	sync
115
116	ori	r4, r4, SC_SOFT_PRE	/* soft_pre */
117	stw	r4, SDRAM_CTRL(r8)
118	sync
119	xori	r4, r4, SC_SOFT_PRE
120
121	xoris	r4, r4, SC_MODE_EN@h	/* !mode_en */
122	stw	r4, SDRAM_CTRL(r8)
123	sync
124
125	/* delay (for NOP to finish) */
126	li	r12, 1
127	bl	udelay
128
129	/*
130	 * mode_en must not be set when enabling self-refresh
131	 * send AR with CKE low (self-refresh)
132	 */
133	oris	r4, r4, (SC_REF_EN | SC_CKE)@h
134	xoris	r4, r4, (SC_CKE)@h	/* ref_en !cke */
135	stw	r4, SDRAM_CTRL(r8)
136	sync
137
138	/* delay (after !CKE there should be two cycles) */
139	li	r12, 1
140	bl	udelay
141
142	/* disable clock */
143	lwz	r4, CDM_CE(r8)
144	ori	r4, r4, CDM_SDRAM
145	xori	r4, r4, CDM_SDRAM
146	stw	r4, CDM_CE(r8)
147	sync
148
149	/* delay a bit */
150	li	r12, 1
151	bl	udelay
152
153
154	/* turn off with QT chip */
155	li	r4, 0x02
156	stb	r4, GPIOW_GPIOE(r8)	/* enable gpio_wkup1 */
157	sync
158
159	stb	r4, GPIOW_DVO(r8)	/* "output" high */
160	sync
161	stb	r4, GPIOW_DDR(r8)	/* output */
162	sync
163	stb	r4, GPIOW_DVO(r8)	/* output high */
164	sync
165
166	/* 10uS delay */
167	li	r12, 10
168	bl	udelay
169
170	/* turn off */
171	li	r4, 0
172	stb	r4, GPIOW_DVO(r8)	/* output low */
173	sync
174
175	/* wait until we're offline */
176  1:
177	b	1b
178
179
180	/* local udelay in sram is needed */
181  udelay: /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */
182	mullw	r12, r12, r11
183	mftb	r13	/* start */
184	addi	r12, r13, r12 /* end */
185    1:
186	mftb	r13	/* current */
187	cmp	cr0, r13, r12
188	blt	1b
189	blr
190
191sram_code_end:
192
193
194
195/* uboot jumps here on resume */
196lite5200_wakeup:
197	bl	restore_regs
198
199
200	/* HIDs, MSR */
201	LOAD_SPRN(HID1, 0x19)
202	LOAD_SPRN(HID2, 0x1a)
203
204
205	/* address translation is tricky (see turn_on_mmu) */
206	mfmsr	r10
207	ori	r10, r10, MSR_DR | MSR_IR
208
209
210	mtspr	SPRN_SRR1, r10
211	lis	r10, mmu_on@h
212	ori	r10, r10, mmu_on@l
213	mtspr	SPRN_SRR0, r10
214	sync
215	rfi
216mmu_on:
217	/* kernel offset (r4 is still set from restore_registers) */
218	addis	r4, r4, CONFIG_KERNEL_START@h
219
220
221	/* restore MSR */
222	lwz	r10, (4*0x1b)(r4)
223	mtmsr	r10
224	sync; isync;
225
226	/* invalidate caches */
227	mfspr	r10, SPRN_HID0
228	ori	r5, r10, HID0_ICFI | HID0_DCI
229	mtspr	SPRN_HID0, r5	/* invalidate caches */
230	sync; isync;
231	mtspr	SPRN_HID0, r10
232	sync; isync;
233
234	/* enable caches */
235	lwz	r10, (4*0x18)(r4)
236	mtspr	SPRN_HID0, r10	/* restore (enable caches, DPM) */
237	/* ^ this has to be after address translation set in MSR */
238	sync
239	isync
240
241
242	/* restore 0xf0 (BDI2000) */
243	lis	r3, CONFIG_KERNEL_START@h
244	lwz	r10, (0x1d*4)(r4)
245	stw	r10, 0xf0(r3)
246
247	LOAD_SPRN(LR, 0x1c)
248
249
250	blr
251_ASM_NOKPROBE_SYMBOL(lite5200_wakeup)
252
253
254/* ---------------------------------------------------------------------- */
255/* boring code: helpers */
256
257/* save registers */
258#define SAVE_BAT(n, addr)		\
259	SAVE_SPRN(DBAT##n##L, addr);	\
260	SAVE_SPRN(DBAT##n##U, addr+1);	\
261	SAVE_SPRN(IBAT##n##L, addr+2);	\
262	SAVE_SPRN(IBAT##n##U, addr+3);
263
264#define SAVE_SR(n, addr)		\
265	mfsr	r10, n;			\
266	stw	r10, ((addr)*4)(r4);
267
268#define SAVE_4SR(n, addr)	\
269	SAVE_SR(n, addr);	\
270	SAVE_SR(n+1, addr+1);	\
271	SAVE_SR(n+2, addr+2);	\
272	SAVE_SR(n+3, addr+3);
273
274save_regs:
275	stw	r0, 0(r4)
276	stw	r1, 0x4(r4)
277	stw	r2, 0x8(r4)
278	stmw	r11, 0xc(r4) /* 0xc -> 0x5f, (0x18*4-1) */
279
280	SAVE_SPRN(HID0, 0x18)
281	SAVE_SPRN(HID1, 0x19)
282	SAVE_SPRN(HID2, 0x1a)
283	mfmsr	r10
284	stw	r10, (4*0x1b)(r4)
285	/*SAVE_SPRN(LR, 0x1c) have to save it before the call */
286	/* 0x1d reserved by 0xf0 */
287	SAVE_SPRN(RPA,   0x1e)
288	SAVE_SPRN(SDR1,  0x1f)
289
290	/* save MMU regs */
291	SAVE_BAT(0, 0x20)
292	SAVE_BAT(1, 0x24)
293	SAVE_BAT(2, 0x28)
294	SAVE_BAT(3, 0x2c)
295	SAVE_BAT(4, 0x30)
296	SAVE_BAT(5, 0x34)
297	SAVE_BAT(6, 0x38)
298	SAVE_BAT(7, 0x3c)
299
300	SAVE_4SR(0, 0x40)
301	SAVE_4SR(4, 0x44)
302	SAVE_4SR(8, 0x48)
303	SAVE_4SR(12, 0x4c)
304
305	SAVE_SPRN(SPRG0, 0x50)
306	SAVE_SPRN(SPRG1, 0x51)
307	SAVE_SPRN(SPRG2, 0x52)
308	SAVE_SPRN(SPRG3, 0x53)
309	SAVE_SPRN(SPRG4, 0x54)
310	SAVE_SPRN(SPRG5, 0x55)
311	SAVE_SPRN(SPRG6, 0x56)
312	SAVE_SPRN(SPRG7, 0x57)
313
314	SAVE_SPRN(IABR,  0x58)
315	SAVE_SPRN(DABR,  0x59)
316	SAVE_SPRN(TBRL,  0x5a)
317	SAVE_SPRN(TBRU,  0x5b)
318
319	blr
320
321
322/* restore registers */
323#define LOAD_BAT(n, addr)		\
324	LOAD_SPRN(DBAT##n##L, addr);	\
325	LOAD_SPRN(DBAT##n##U, addr+1);	\
326	LOAD_SPRN(IBAT##n##L, addr+2);	\
327	LOAD_SPRN(IBAT##n##U, addr+3);
328
329#define LOAD_SR(n, addr)		\
330	lwz	r10, ((addr)*4)(r4);	\
331	mtsr	n, r10;
332
333#define LOAD_4SR(n, addr)	\
334	LOAD_SR(n, addr);	\
335	LOAD_SR(n+1, addr+1);	\
336	LOAD_SR(n+2, addr+2);	\
337	LOAD_SR(n+3, addr+3);
338
339restore_regs:
340	lis	r4, registers@h
341	ori	r4, r4, registers@l
342
343	/* MMU is not up yet */
344	subis	r4, r4, CONFIG_KERNEL_START@h
345
346	lwz	r0, 0(r4)
347	lwz	r1, 0x4(r4)
348	lwz	r2, 0x8(r4)
349	lmw	r11, 0xc(r4)
350
351	/*
352	 * these are a bit tricky
353	 *
354	 * 0x18 - HID0
355	 * 0x19 - HID1
356	 * 0x1a - HID2
357	 * 0x1b - MSR
358	 * 0x1c - LR
359	 * 0x1d - reserved by 0xf0 (BDI2000)
360	 */
361	LOAD_SPRN(RPA,   0x1e);
362	LOAD_SPRN(SDR1,  0x1f);
363
364	/* restore MMU regs */
365	LOAD_BAT(0, 0x20)
366	LOAD_BAT(1, 0x24)
367	LOAD_BAT(2, 0x28)
368	LOAD_BAT(3, 0x2c)
369	LOAD_BAT(4, 0x30)
370	LOAD_BAT(5, 0x34)
371	LOAD_BAT(6, 0x38)
372	LOAD_BAT(7, 0x3c)
373
374	LOAD_4SR(0, 0x40)
375	LOAD_4SR(4, 0x44)
376	LOAD_4SR(8, 0x48)
377	LOAD_4SR(12, 0x4c)
378
379	/* rest of regs */
380	LOAD_SPRN(SPRG0, 0x50);
381	LOAD_SPRN(SPRG1, 0x51);
382	LOAD_SPRN(SPRG2, 0x52);
383	LOAD_SPRN(SPRG3, 0x53);
384	LOAD_SPRN(SPRG4, 0x54);
385	LOAD_SPRN(SPRG5, 0x55);
386	LOAD_SPRN(SPRG6, 0x56);
387	LOAD_SPRN(SPRG7, 0x57);
388
389	LOAD_SPRN(IABR,  0x58);
390	LOAD_SPRN(DABR,  0x59);
391	LOAD_SPRN(TBWL,  0x5a);	/* these two have separate R/W regs */
392	LOAD_SPRN(TBWU,  0x5b);
393
394	blr
395_ASM_NOKPROBE_SYMBOL(restore_regs)
396
397
398
399/* cache flushing code. copied from arch/ppc/boot/util.S */
400#define NUM_CACHE_LINES (128*8)
401
402/*
403 * Flush data cache
404 * Do this by just reading lots of stuff into the cache.
405 */
406flush_data_cache:
407	lis	r3,CONFIG_KERNEL_START@h
408	ori	r3,r3,CONFIG_KERNEL_START@l
409	li	r4,NUM_CACHE_LINES
410	mtctr	r4
4111:
412	lwz	r4,0(r3)
413	addi	r3,r3,L1_CACHE_BYTES	/* Next line, please */
414	bdnz	1b
415	blr
416