1 /* 2 * PPC476 board specific routines 3 * 4 * Copyright 2010 Torez Smith, IBM Corporation. 5 * 6 * Based on earlier code: 7 * Matt Porter <mporter@kernel.crashing.org> 8 * Copyright 2002-2005 MontaVista Software Inc. 9 * 10 * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> 11 * Copyright (c) 2003-2005 Zultys Technologies 12 * 13 * Rewritten and ported to the merged powerpc tree: 14 * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation. 15 * 16 * This program is free software; you can redistribute it and/or modify it 17 * under the terms of the GNU General Public License as published by the 18 * Free Software Foundation; either version 2 of the License, or (at your 19 * option) any later version. 20 */ 21 22 #include <linux/init.h> 23 #include <linux/of_platform.h> 24 #include <linux/rtc.h> 25 26 #include <asm/machdep.h> 27 #include <asm/prom.h> 28 #include <asm/udbg.h> 29 #include <asm/time.h> 30 #include <asm/uic.h> 31 #include <asm/ppc4xx.h> 32 #include <asm/mpic.h> 33 #include <asm/mmu.h> 34 35 static const struct of_device_id iss4xx_of_bus[] __initconst = { 36 { .compatible = "ibm,plb4", }, 37 { .compatible = "ibm,plb6", }, 38 { .compatible = "ibm,opb", }, 39 { .compatible = "ibm,ebc", }, 40 {}, 41 }; 42 43 static int __init iss4xx_device_probe(void) 44 { 45 of_platform_bus_probe(NULL, iss4xx_of_bus, NULL); 46 of_instantiate_rtc(); 47 48 return 0; 49 } 50 machine_device_initcall(iss4xx, iss4xx_device_probe); 51 52 /* We can have either UICs or MPICs */ 53 static void __init iss4xx_init_irq(void) 54 { 55 struct device_node *np; 56 57 /* Find top level interrupt controller */ 58 for_each_node_with_property(np, "interrupt-controller") { 59 if (of_get_property(np, "interrupts", NULL) == NULL) 60 break; 61 } 62 if (np == NULL) 63 panic("Can't find top level interrupt controller"); 64 65 /* Check type and do appropriate initialization */ 66 if (of_device_is_compatible(np, "ibm,uic")) { 67 uic_init_tree(); 68 ppc_md.get_irq = uic_get_irq; 69 #ifdef CONFIG_MPIC 70 } else if (of_device_is_compatible(np, "chrp,open-pic")) { 71 /* The MPIC driver will get everything it needs from the 72 * device-tree, just pass 0 to all arguments 73 */ 74 struct mpic *mpic = mpic_alloc(np, 0, MPIC_NO_RESET, 0, 0, " MPIC "); 75 BUG_ON(mpic == NULL); 76 mpic_init(mpic); 77 ppc_md.get_irq = mpic_get_irq; 78 #endif 79 } else 80 panic("Unrecognized top level interrupt controller"); 81 } 82 83 #ifdef CONFIG_SMP 84 static void smp_iss4xx_setup_cpu(int cpu) 85 { 86 mpic_setup_this_cpu(); 87 } 88 89 static int smp_iss4xx_kick_cpu(int cpu) 90 { 91 struct device_node *cpunode = of_get_cpu_node(cpu, NULL); 92 const u64 *spin_table_addr_prop; 93 u32 *spin_table; 94 extern void start_secondary_47x(void); 95 96 BUG_ON(cpunode == NULL); 97 98 /* Assume spin table. We could test for the enable-method in 99 * the device-tree but currently there's little point as it's 100 * our only supported method 101 */ 102 spin_table_addr_prop = of_get_property(cpunode, "cpu-release-addr", 103 NULL); 104 if (spin_table_addr_prop == NULL) { 105 pr_err("CPU%d: Can't start, missing cpu-release-addr !\n", cpu); 106 return -ENOENT; 107 } 108 109 /* Assume it's mapped as part of the linear mapping. This is a bit 110 * fishy but will work fine for now 111 */ 112 spin_table = (u32 *)__va(*spin_table_addr_prop); 113 pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table); 114 115 spin_table[3] = cpu; 116 smp_wmb(); 117 spin_table[1] = __pa(start_secondary_47x); 118 mb(); 119 120 return 0; 121 } 122 123 static struct smp_ops_t iss_smp_ops = { 124 .probe = smp_mpic_probe, 125 .message_pass = smp_mpic_message_pass, 126 .setup_cpu = smp_iss4xx_setup_cpu, 127 .kick_cpu = smp_iss4xx_kick_cpu, 128 .give_timebase = smp_generic_give_timebase, 129 .take_timebase = smp_generic_take_timebase, 130 }; 131 132 static void __init iss4xx_smp_init(void) 133 { 134 if (mmu_has_feature(MMU_FTR_TYPE_47x)) 135 smp_ops = &iss_smp_ops; 136 } 137 138 #else /* CONFIG_SMP */ 139 static void __init iss4xx_smp_init(void) { } 140 #endif /* CONFIG_SMP */ 141 142 static void __init iss4xx_setup_arch(void) 143 { 144 iss4xx_smp_init(); 145 } 146 147 /* 148 * Called very early, MMU is off, device-tree isn't unflattened 149 */ 150 static int __init iss4xx_probe(void) 151 { 152 if (!of_machine_is_compatible("ibm,iss-4xx")) 153 return 0; 154 155 return 1; 156 } 157 158 define_machine(iss4xx) { 159 .name = "ISS-4xx", 160 .probe = iss4xx_probe, 161 .progress = udbg_progress, 162 .init_IRQ = iss4xx_init_irq, 163 .setup_arch = iss4xx_setup_arch, 164 .restart = ppc4xx_reset_system, 165 .calibrate_decr = generic_calibrate_decr, 166 }; 167