xref: /openbmc/linux/arch/powerpc/platforms/44x/fsp2.c (revision b23bf21f)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * FSP-2 board specific routines
4  *
5  * Based on earlier code:
6  *    Matt Porter <mporter@kernel.crashing.org>
7  *    Copyright 2002-2005 MontaVista Software Inc.
8  *
9  *    Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
10  *    Copyright (c) 2003-2005 Zultys Technologies
11  *
12  *    Rewritten and ported to the merged powerpc tree:
13  *    Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
14  */
15 
16 #include <linux/init.h>
17 #include <linux/of_platform.h>
18 #include <linux/rtc.h>
19 
20 #include <asm/machdep.h>
21 #include <asm/prom.h>
22 #include <asm/udbg.h>
23 #include <asm/time.h>
24 #include <asm/uic.h>
25 #include <asm/ppc4xx.h>
26 #include <asm/dcr.h>
27 #include <linux/interrupt.h>
28 #include <linux/of_irq.h>
29 #include "fsp2.h"
30 
31 #define FSP2_BUS_ERR	"ibm,bus-error-irq"
32 #define FSP2_CMU_ERR	"ibm,cmu-error-irq"
33 #define FSP2_CONF_ERR	"ibm,conf-error-irq"
34 #define FSP2_OPBD_ERR	"ibm,opbd-error-irq"
35 #define FSP2_MCUE	"ibm,mc-ue-irq"
36 #define FSP2_RST_WRN	"ibm,reset-warning-irq"
37 
38 static __initdata struct of_device_id fsp2_of_bus[] = {
39 	{ .compatible = "ibm,plb4", },
40 	{ .compatible = "ibm,plb6", },
41 	{ .compatible = "ibm,opb", },
42 	{},
43 };
44 
45 static void l2regs(void)
46 {
47 	pr_err("L2 Controller:\n");
48 	pr_err("MCK:      0x%08x\n", mfl2(L2MCK));
49 	pr_err("INT:      0x%08x\n", mfl2(L2INT));
50 	pr_err("PLBSTAT0: 0x%08x\n", mfl2(L2PLBSTAT0));
51 	pr_err("PLBSTAT1: 0x%08x\n", mfl2(L2PLBSTAT1));
52 	pr_err("ARRSTAT0: 0x%08x\n", mfl2(L2ARRSTAT0));
53 	pr_err("ARRSTAT1: 0x%08x\n", mfl2(L2ARRSTAT1));
54 	pr_err("ARRSTAT2: 0x%08x\n", mfl2(L2ARRSTAT2));
55 	pr_err("CPUSTAT:  0x%08x\n", mfl2(L2CPUSTAT));
56 	pr_err("RACSTAT0: 0x%08x\n", mfl2(L2RACSTAT0));
57 	pr_err("WACSTAT0: 0x%08x\n", mfl2(L2WACSTAT0));
58 	pr_err("WACSTAT1: 0x%08x\n", mfl2(L2WACSTAT1));
59 	pr_err("WACSTAT2: 0x%08x\n", mfl2(L2WACSTAT2));
60 	pr_err("WDFSTAT:  0x%08x\n", mfl2(L2WDFSTAT));
61 	pr_err("LOG0:     0x%08x\n", mfl2(L2LOG0));
62 	pr_err("LOG1:     0x%08x\n", mfl2(L2LOG1));
63 	pr_err("LOG2:     0x%08x\n", mfl2(L2LOG2));
64 	pr_err("LOG3:     0x%08x\n", mfl2(L2LOG3));
65 	pr_err("LOG4:     0x%08x\n", mfl2(L2LOG4));
66 	pr_err("LOG5:     0x%08x\n", mfl2(L2LOG5));
67 }
68 
69 static void show_plbopb_regs(u32 base, int num)
70 {
71 	pr_err("\nPLBOPB Bridge %d:\n", num);
72 	pr_err("GESR0: 0x%08x\n", mfdcr(base + PLB4OPB_GESR0));
73 	pr_err("GESR1: 0x%08x\n", mfdcr(base + PLB4OPB_GESR1));
74 	pr_err("GESR2: 0x%08x\n", mfdcr(base + PLB4OPB_GESR2));
75 	pr_err("GEARU: 0x%08x\n", mfdcr(base + PLB4OPB_GEARU));
76 	pr_err("GEAR:  0x%08x\n", mfdcr(base + PLB4OPB_GEAR));
77 }
78 
79 static irqreturn_t bus_err_handler(int irq, void *data)
80 {
81 	pr_err("Bus Error\n");
82 
83 	l2regs();
84 
85 	pr_err("\nPLB6 Controller:\n");
86 	pr_err("BC_SHD: 0x%08x\n", mfdcr(DCRN_PLB6_SHD));
87 	pr_err("BC_ERR: 0x%08x\n", mfdcr(DCRN_PLB6_ERR));
88 
89 	pr_err("\nPLB6-to-PLB4 Bridge:\n");
90 	pr_err("ESR:  0x%08x\n", mfdcr(DCRN_PLB6PLB4_ESR));
91 	pr_err("EARH: 0x%08x\n", mfdcr(DCRN_PLB6PLB4_EARH));
92 	pr_err("EARL: 0x%08x\n", mfdcr(DCRN_PLB6PLB4_EARL));
93 
94 	pr_err("\nPLB4-to-PLB6 Bridge:\n");
95 	pr_err("ESR:  0x%08x\n", mfdcr(DCRN_PLB4PLB6_ESR));
96 	pr_err("EARH: 0x%08x\n", mfdcr(DCRN_PLB4PLB6_EARH));
97 	pr_err("EARL: 0x%08x\n", mfdcr(DCRN_PLB4PLB6_EARL));
98 
99 	pr_err("\nPLB6-to-MCIF Bridge:\n");
100 	pr_err("BESR0: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BESR0));
101 	pr_err("BESR1: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BESR1));
102 	pr_err("BEARH: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BEARH));
103 	pr_err("BEARL: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BEARL));
104 
105 	pr_err("\nPLB4 Arbiter:\n");
106 	pr_err("P0ESRH 0x%08x\n", mfdcr(DCRN_PLB4_P0ESRH));
107 	pr_err("P0ESRL 0x%08x\n", mfdcr(DCRN_PLB4_P0ESRL));
108 	pr_err("P0EARH 0x%08x\n", mfdcr(DCRN_PLB4_P0EARH));
109 	pr_err("P0EARH 0x%08x\n", mfdcr(DCRN_PLB4_P0EARH));
110 	pr_err("P1ESRH 0x%08x\n", mfdcr(DCRN_PLB4_P1ESRH));
111 	pr_err("P1ESRL 0x%08x\n", mfdcr(DCRN_PLB4_P1ESRL));
112 	pr_err("P1EARH 0x%08x\n", mfdcr(DCRN_PLB4_P1EARH));
113 	pr_err("P1EARH 0x%08x\n", mfdcr(DCRN_PLB4_P1EARH));
114 
115 	show_plbopb_regs(DCRN_PLB4OPB0_BASE, 0);
116 	show_plbopb_regs(DCRN_PLB4OPB1_BASE, 1);
117 	show_plbopb_regs(DCRN_PLB4OPB2_BASE, 2);
118 	show_plbopb_regs(DCRN_PLB4OPB3_BASE, 3);
119 
120 	pr_err("\nPLB4-to-AHB Bridge:\n");
121 	pr_err("ESR:   0x%08x\n", mfdcr(DCRN_PLB4AHB_ESR));
122 	pr_err("SEUAR: 0x%08x\n", mfdcr(DCRN_PLB4AHB_SEUAR));
123 	pr_err("SELAR: 0x%08x\n", mfdcr(DCRN_PLB4AHB_SELAR));
124 
125 	pr_err("\nAHB-to-PLB4 Bridge:\n");
126 	pr_err("\nESR: 0x%08x\n", mfdcr(DCRN_AHBPLB4_ESR));
127 	pr_err("\nEAR: 0x%08x\n", mfdcr(DCRN_AHBPLB4_EAR));
128 	panic("Bus Error\n");
129 }
130 
131 static irqreturn_t cmu_err_handler(int irq, void *data) {
132 	pr_err("CMU Error\n");
133 	pr_err("FIR0: 0x%08x\n", mfcmu(CMUN_FIR0));
134 	panic("CMU Error\n");
135 }
136 
137 static irqreturn_t conf_err_handler(int irq, void *data) {
138 	pr_err("Configuration Logic Error\n");
139 	pr_err("CONF_FIR: 0x%08x\n", mfdcr(DCRN_CONF_FIR_RWC));
140 	pr_err("RPERR0:   0x%08x\n", mfdcr(DCRN_CONF_RPERR0));
141 	pr_err("RPERR1:   0x%08x\n", mfdcr(DCRN_CONF_RPERR1));
142 	panic("Configuration Logic Error\n");
143 }
144 
145 static irqreturn_t opbd_err_handler(int irq, void *data) {
146 	panic("OPBD Error\n");
147 }
148 
149 static irqreturn_t mcue_handler(int irq, void *data) {
150 	pr_err("DDR: Uncorrectable Error\n");
151 	pr_err("MCSTAT:            0x%08x\n",
152 		mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_MCSTAT));
153 	pr_err("MCOPT1:            0x%08x\n",
154 		mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_MCOPT1));
155 	pr_err("MCOPT2:            0x%08x\n",
156 		mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_MCOPT2));
157 	pr_err("PHYSTAT:           0x%08x\n",
158 		mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_PHYSTAT));
159 	pr_err("CFGR0:             0x%08x\n",
160 		mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_CFGR0));
161 	pr_err("CFGR1:             0x%08x\n",
162 		mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_CFGR1));
163 	pr_err("CFGR2:             0x%08x\n",
164 		mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_CFGR2));
165 	pr_err("CFGR3:             0x%08x\n",
166 		mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_CFGR3));
167 	pr_err("SCRUB_CNTL:        0x%08x\n",
168 		mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_SCRUB_CNTL));
169 	pr_err("ECCERR_PORT0:      0x%08x\n",
170 		mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_ECCERR_PORT0));
171 	pr_err("ECCERR_ADDR_PORT0: 0x%08x\n",
172 		mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_ECCERR_ADDR_PORT0));
173 	pr_err("ECCERR_CNT_PORT0:  0x%08x\n",
174 		mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_ECCERR_COUNT_PORT0));
175 	pr_err("ECC_CHECK_PORT0:   0x%08x\n",
176 		mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_ECC_CHECK_PORT0));
177 	pr_err("MCER0:            0x%08x\n",
178 		mfdcr(DCRN_CW_BASE + DCRN_CW_MCER0));
179 	pr_err("MCER1:            0x%08x\n",
180 		mfdcr(DCRN_CW_BASE + DCRN_CW_MCER1));
181 	pr_err("BESR:             0x%08x\n",
182 		mfdcr(DCRN_PLB6MCIF_BESR0));
183 	pr_err("BEARL:            0x%08x\n",
184 		mfdcr(DCRN_PLB6MCIF_BEARL));
185 	pr_err("BEARH:            0x%08x\n",
186 		mfdcr(DCRN_PLB6MCIF_BEARH));
187 	panic("DDR: Uncorrectable Error\n");
188 }
189 
190 static irqreturn_t rst_wrn_handler(int irq, void *data) {
191 	u32 crcs = mfcmu(CMUN_CRCS);
192 	switch (crcs & CRCS_STAT_MASK) {
193 	case CRCS_STAT_CHIP_RST_B:
194 		panic("Received chassis-initiated reset request");
195 	default:
196 		panic("Unknown external reset: CRCS=0x%x", crcs);
197 	}
198 }
199 
200 static void node_irq_request(const char *compat, irq_handler_t errirq_handler)
201 {
202 	struct device_node *np;
203 	unsigned int irq;
204 	int32_t rc;
205 
206 	for_each_compatible_node(np, NULL, compat) {
207 		irq = irq_of_parse_and_map(np, 0);
208 		if (irq == NO_IRQ) {
209 			pr_err("device tree node %pOFn is missing a interrupt",
210 			      np);
211 			return;
212 		}
213 
214 		rc = request_irq(irq, errirq_handler, 0, np->name, np);
215 		if (rc) {
216 			pr_err("fsp_of_probe: request_irq failed: np=%pOF rc=%d",
217 			      np, rc);
218 			return;
219 		}
220 	}
221 }
222 
223 static void critical_irq_setup(void)
224 {
225 	node_irq_request(FSP2_CMU_ERR, cmu_err_handler);
226 	node_irq_request(FSP2_BUS_ERR, bus_err_handler);
227 	node_irq_request(FSP2_CONF_ERR, conf_err_handler);
228 	node_irq_request(FSP2_OPBD_ERR, opbd_err_handler);
229 	node_irq_request(FSP2_MCUE, mcue_handler);
230 	node_irq_request(FSP2_RST_WRN, rst_wrn_handler);
231 }
232 
233 static int __init fsp2_device_probe(void)
234 {
235 	of_platform_bus_probe(NULL, fsp2_of_bus, NULL);
236 	return 0;
237 }
238 machine_device_initcall(fsp2, fsp2_device_probe);
239 
240 static int __init fsp2_probe(void)
241 {
242 	u32 val;
243 	unsigned long root = of_get_flat_dt_root();
244 
245 	if (!of_flat_dt_is_compatible(root, "ibm,fsp2"))
246 		return 0;
247 
248 	/* Clear BC_ERR and mask snoopable request plb errors. */
249 	val = mfdcr(DCRN_PLB6_CR0);
250 	val |= 0x20000000;
251 	mtdcr(DCRN_PLB6_BASE, val);
252 	mtdcr(DCRN_PLB6_HD, 0xffff0000);
253 	mtdcr(DCRN_PLB6_SHD, 0xffff0000);
254 
255 	/* TVSENSE reset is blocked (clock gated) by the POR default of the TVS
256 	 * sleep config bit. As a consequence, TVSENSE will provide erratic
257 	 * sensor values, which may result in spurious (parity) errors
258 	 * recorded in the CMU FIR and leading to erroneous interrupt requests
259 	 * once the CMU interrupt is unmasked.
260 	 */
261 
262 	/* 1. set TVS1[UNDOZE] */
263 	val = mfcmu(CMUN_TVS1);
264 	val |= 0x4;
265 	mtcmu(CMUN_TVS1, val);
266 
267 	/* 2. clear FIR[TVS] and FIR[TVSPAR] */
268 	val = mfcmu(CMUN_FIR0);
269 	val |= 0x30000000;
270 	mtcmu(CMUN_FIR0, val);
271 
272 	/* L2 machine checks */
273 	mtl2(L2PLBMCKEN0, 0xffffffff);
274 	mtl2(L2PLBMCKEN1, 0x0000ffff);
275 	mtl2(L2ARRMCKEN0, 0xffffffff);
276 	mtl2(L2ARRMCKEN1, 0xffffffff);
277 	mtl2(L2ARRMCKEN2, 0xfffff000);
278 	mtl2(L2CPUMCKEN,  0xffffffff);
279 	mtl2(L2RACMCKEN0, 0xffffffff);
280 	mtl2(L2WACMCKEN0, 0xffffffff);
281 	mtl2(L2WACMCKEN1, 0xffffffff);
282 	mtl2(L2WACMCKEN2, 0xffffffff);
283 	mtl2(L2WDFMCKEN,  0xffffffff);
284 
285 	/* L2 interrupts */
286 	mtl2(L2PLBINTEN1, 0xffff0000);
287 
288 	/*
289 	 * At a global level, enable all L2 machine checks and interrupts
290 	 * reported by the L2 subsystems, except for the external machine check
291 	 * input (UIC0.1).
292 	 */
293 	mtl2(L2MCKEN, 0x000007ff);
294 	mtl2(L2INTEN, 0x000004ff);
295 
296 	/* Enable FSP-2 configuration logic parity errors */
297 	mtdcr(DCRN_CONF_EIR_RS, 0x80000000);
298 	return 1;
299 }
300 
301 static void __init fsp2_irq_init(void)
302 {
303 	uic_init_tree();
304 	critical_irq_setup();
305 }
306 
307 define_machine(fsp2) {
308 	.name			= "FSP-2",
309 	.probe			= fsp2_probe,
310 	.progress		= udbg_progress,
311 	.init_IRQ		= fsp2_irq_init,
312 	.get_irq		= uic_get_irq,
313 	.restart		= ppc4xx_reset_system,
314 	.calibrate_decr		= generic_calibrate_decr,
315 };
316