xref: /openbmc/linux/arch/powerpc/net/bpf_jit_comp.c (revision f9900dd0)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * eBPF JIT compiler
4  *
5  * Copyright 2016 Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
6  *		  IBM Corporation
7  *
8  * Based on the powerpc classic BPF JIT compiler by Matt Evans
9  */
10 #include <linux/moduleloader.h>
11 #include <asm/cacheflush.h>
12 #include <asm/asm-compat.h>
13 #include <linux/netdevice.h>
14 #include <linux/filter.h>
15 #include <linux/if_vlan.h>
16 #include <asm/kprobes.h>
17 #include <linux/bpf.h>
18 
19 #include "bpf_jit.h"
20 
21 static void bpf_jit_fill_ill_insns(void *area, unsigned int size)
22 {
23 	memset32(area, BREAKPOINT_INSTRUCTION, size / 4);
24 }
25 
26 /* Fix updated addresses (for subprog calls, ldimm64, et al) during extra pass */
27 static int bpf_jit_fixup_addresses(struct bpf_prog *fp, u32 *image,
28 				   struct codegen_context *ctx, u32 *addrs)
29 {
30 	const struct bpf_insn *insn = fp->insnsi;
31 	bool func_addr_fixed;
32 	u64 func_addr;
33 	u32 tmp_idx;
34 	int i, j, ret;
35 
36 	for (i = 0; i < fp->len; i++) {
37 		/*
38 		 * During the extra pass, only the branch target addresses for
39 		 * the subprog calls need to be fixed. All other instructions
40 		 * can left untouched.
41 		 *
42 		 * The JITed image length does not change because we already
43 		 * ensure that the JITed instruction sequence for these calls
44 		 * are of fixed length by padding them with NOPs.
45 		 */
46 		if (insn[i].code == (BPF_JMP | BPF_CALL) &&
47 		    insn[i].src_reg == BPF_PSEUDO_CALL) {
48 			ret = bpf_jit_get_func_addr(fp, &insn[i], true,
49 						    &func_addr,
50 						    &func_addr_fixed);
51 			if (ret < 0)
52 				return ret;
53 
54 			/*
55 			 * Save ctx->idx as this would currently point to the
56 			 * end of the JITed image and set it to the offset of
57 			 * the instruction sequence corresponding to the
58 			 * subprog call temporarily.
59 			 */
60 			tmp_idx = ctx->idx;
61 			ctx->idx = addrs[i] / 4;
62 			bpf_jit_emit_func_call_rel(image, ctx, func_addr);
63 
64 			/*
65 			 * Restore ctx->idx here. This is safe as the length
66 			 * of the JITed sequence remains unchanged.
67 			 */
68 			ctx->idx = tmp_idx;
69 		} else if (insn[i].code == (BPF_LD | BPF_IMM | BPF_DW)) {
70 			tmp_idx = ctx->idx;
71 			ctx->idx = addrs[i] / 4;
72 #ifdef CONFIG_PPC32
73 			PPC_LI32(ctx->b2p[insn[i].dst_reg] - 1, (u32)insn[i + 1].imm);
74 			PPC_LI32(ctx->b2p[insn[i].dst_reg], (u32)insn[i].imm);
75 			for (j = ctx->idx - addrs[i] / 4; j < 4; j++)
76 				EMIT(PPC_RAW_NOP());
77 #else
78 			func_addr = ((u64)(u32)insn[i].imm) | (((u64)(u32)insn[i + 1].imm) << 32);
79 			PPC_LI64(b2p[insn[i].dst_reg], func_addr);
80 			/* overwrite rest with nops */
81 			for (j = ctx->idx - addrs[i] / 4; j < 5; j++)
82 				EMIT(PPC_RAW_NOP());
83 #endif
84 			ctx->idx = tmp_idx;
85 			i++;
86 		}
87 	}
88 
89 	return 0;
90 }
91 
92 struct powerpc64_jit_data {
93 	struct bpf_binary_header *header;
94 	u32 *addrs;
95 	u8 *image;
96 	u32 proglen;
97 	struct codegen_context ctx;
98 };
99 
100 bool bpf_jit_needs_zext(void)
101 {
102 	return true;
103 }
104 
105 struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
106 {
107 	u32 proglen;
108 	u32 alloclen;
109 	u8 *image = NULL;
110 	u32 *code_base;
111 	u32 *addrs;
112 	struct powerpc64_jit_data *jit_data;
113 	struct codegen_context cgctx;
114 	int pass;
115 	int flen;
116 	struct bpf_binary_header *bpf_hdr;
117 	struct bpf_prog *org_fp = fp;
118 	struct bpf_prog *tmp_fp;
119 	bool bpf_blinded = false;
120 	bool extra_pass = false;
121 	u32 extable_len;
122 	u32 fixup_len;
123 
124 	if (!fp->jit_requested)
125 		return org_fp;
126 
127 	tmp_fp = bpf_jit_blind_constants(org_fp);
128 	if (IS_ERR(tmp_fp))
129 		return org_fp;
130 
131 	if (tmp_fp != org_fp) {
132 		bpf_blinded = true;
133 		fp = tmp_fp;
134 	}
135 
136 	jit_data = fp->aux->jit_data;
137 	if (!jit_data) {
138 		jit_data = kzalloc(sizeof(*jit_data), GFP_KERNEL);
139 		if (!jit_data) {
140 			fp = org_fp;
141 			goto out;
142 		}
143 		fp->aux->jit_data = jit_data;
144 	}
145 
146 	flen = fp->len;
147 	addrs = jit_data->addrs;
148 	if (addrs) {
149 		cgctx = jit_data->ctx;
150 		image = jit_data->image;
151 		bpf_hdr = jit_data->header;
152 		proglen = jit_data->proglen;
153 		extra_pass = true;
154 		goto skip_init_ctx;
155 	}
156 
157 	addrs = kcalloc(flen + 1, sizeof(*addrs), GFP_KERNEL);
158 	if (addrs == NULL) {
159 		fp = org_fp;
160 		goto out_addrs;
161 	}
162 
163 	memset(&cgctx, 0, sizeof(struct codegen_context));
164 	memcpy(cgctx.b2p, b2p, sizeof(cgctx.b2p));
165 
166 	/* Make sure that the stack is quadword aligned. */
167 	cgctx.stack_size = round_up(fp->aux->stack_depth, 16);
168 
169 	/* Scouting faux-generate pass 0 */
170 	if (bpf_jit_build_body(fp, 0, &cgctx, addrs, 0)) {
171 		/* We hit something illegal or unsupported. */
172 		fp = org_fp;
173 		goto out_addrs;
174 	}
175 
176 	/*
177 	 * If we have seen a tail call, we need a second pass.
178 	 * This is because bpf_jit_emit_common_epilogue() is called
179 	 * from bpf_jit_emit_tail_call() with a not yet stable ctx->seen.
180 	 */
181 	if (cgctx.seen & SEEN_TAILCALL) {
182 		cgctx.idx = 0;
183 		if (bpf_jit_build_body(fp, 0, &cgctx, addrs, 0)) {
184 			fp = org_fp;
185 			goto out_addrs;
186 		}
187 	}
188 
189 	bpf_jit_realloc_regs(&cgctx);
190 	/*
191 	 * Pretend to build prologue, given the features we've seen.  This will
192 	 * update ctgtx.idx as it pretends to output instructions, then we can
193 	 * calculate total size from idx.
194 	 */
195 	bpf_jit_build_prologue(0, &cgctx);
196 	bpf_jit_build_epilogue(0, &cgctx);
197 
198 	fixup_len = fp->aux->num_exentries * BPF_FIXUP_LEN * 4;
199 	extable_len = fp->aux->num_exentries * sizeof(struct exception_table_entry);
200 
201 	proglen = cgctx.idx * 4;
202 	alloclen = proglen + FUNCTION_DESCR_SIZE + fixup_len + extable_len;
203 
204 	bpf_hdr = bpf_jit_binary_alloc(alloclen, &image, 4, bpf_jit_fill_ill_insns);
205 	if (!bpf_hdr) {
206 		fp = org_fp;
207 		goto out_addrs;
208 	}
209 
210 	if (extable_len)
211 		fp->aux->extable = (void *)image + FUNCTION_DESCR_SIZE + proglen + fixup_len;
212 
213 skip_init_ctx:
214 	code_base = (u32 *)(image + FUNCTION_DESCR_SIZE);
215 
216 	if (extra_pass) {
217 		/*
218 		 * Do not touch the prologue and epilogue as they will remain
219 		 * unchanged. Only fix the branch target address for subprog
220 		 * calls in the body, and ldimm64 instructions.
221 		 *
222 		 * This does not change the offsets and lengths of the subprog
223 		 * call instruction sequences and hence, the size of the JITed
224 		 * image as well.
225 		 */
226 		bpf_jit_fixup_addresses(fp, code_base, &cgctx, addrs);
227 
228 		/* There is no need to perform the usual passes. */
229 		goto skip_codegen_passes;
230 	}
231 
232 	/* Code generation passes 1-2 */
233 	for (pass = 1; pass < 3; pass++) {
234 		/* Now build the prologue, body code & epilogue for real. */
235 		cgctx.idx = 0;
236 		bpf_jit_build_prologue(code_base, &cgctx);
237 		if (bpf_jit_build_body(fp, code_base, &cgctx, addrs, pass)) {
238 			bpf_jit_binary_free(bpf_hdr);
239 			fp = org_fp;
240 			goto out_addrs;
241 		}
242 		bpf_jit_build_epilogue(code_base, &cgctx);
243 
244 		if (bpf_jit_enable > 1)
245 			pr_info("Pass %d: shrink = %d, seen = 0x%x\n", pass,
246 				proglen - (cgctx.idx * 4), cgctx.seen);
247 	}
248 
249 skip_codegen_passes:
250 	if (bpf_jit_enable > 1)
251 		/*
252 		 * Note that we output the base address of the code_base
253 		 * rather than image, since opcodes are in code_base.
254 		 */
255 		bpf_jit_dump(flen, proglen, pass, code_base);
256 
257 #ifdef PPC64_ELF_ABI_v1
258 	/* Function descriptor nastiness: Address + TOC */
259 	((u64 *)image)[0] = (u64)code_base;
260 	((u64 *)image)[1] = local_paca->kernel_toc;
261 #endif
262 
263 	fp->bpf_func = (void *)image;
264 	fp->jited = 1;
265 	fp->jited_len = proglen + FUNCTION_DESCR_SIZE;
266 
267 	bpf_flush_icache(bpf_hdr, (u8 *)bpf_hdr + (bpf_hdr->pages * PAGE_SIZE));
268 	if (!fp->is_func || extra_pass) {
269 		bpf_jit_binary_lock_ro(bpf_hdr);
270 		bpf_prog_fill_jited_linfo(fp, addrs);
271 out_addrs:
272 		kfree(addrs);
273 		kfree(jit_data);
274 		fp->aux->jit_data = NULL;
275 	} else {
276 		jit_data->addrs = addrs;
277 		jit_data->ctx = cgctx;
278 		jit_data->proglen = proglen;
279 		jit_data->image = image;
280 		jit_data->header = bpf_hdr;
281 	}
282 
283 out:
284 	if (bpf_blinded)
285 		bpf_jit_prog_release_other(fp, fp == org_fp ? tmp_fp : org_fp);
286 
287 	return fp;
288 }
289 
290 /*
291  * The caller should check for (BPF_MODE(code) == BPF_PROBE_MEM) before calling
292  * this function, as this only applies to BPF_PROBE_MEM, for now.
293  */
294 int bpf_add_extable_entry(struct bpf_prog *fp, u32 *image, int pass, struct codegen_context *ctx,
295 			  int insn_idx, int jmp_off, int dst_reg)
296 {
297 	off_t offset;
298 	unsigned long pc;
299 	struct exception_table_entry *ex;
300 	u32 *fixup;
301 
302 	/* Populate extable entries only in the last pass */
303 	if (pass != 2)
304 		return 0;
305 
306 	if (!fp->aux->extable ||
307 	    WARN_ON_ONCE(ctx->exentry_idx >= fp->aux->num_exentries))
308 		return -EINVAL;
309 
310 	pc = (unsigned long)&image[insn_idx];
311 
312 	fixup = (void *)fp->aux->extable -
313 		(fp->aux->num_exentries * BPF_FIXUP_LEN * 4) +
314 		(ctx->exentry_idx * BPF_FIXUP_LEN * 4);
315 
316 	fixup[0] = PPC_RAW_LI(dst_reg, 0);
317 	if (IS_ENABLED(CONFIG_PPC32))
318 		fixup[1] = PPC_RAW_LI(dst_reg - 1, 0); /* clear higher 32-bit register too */
319 
320 	fixup[BPF_FIXUP_LEN - 1] =
321 		PPC_RAW_BRANCH((long)(pc + jmp_off) - (long)&fixup[BPF_FIXUP_LEN - 1]);
322 
323 	ex = &fp->aux->extable[ctx->exentry_idx];
324 
325 	offset = pc - (long)&ex->insn;
326 	if (WARN_ON_ONCE(offset >= 0 || offset < INT_MIN))
327 		return -ERANGE;
328 	ex->insn = offset;
329 
330 	offset = (long)fixup - (long)&ex->fixup;
331 	if (WARN_ON_ONCE(offset >= 0 || offset < INT_MIN))
332 		return -ERANGE;
333 	ex->fixup = offset;
334 
335 	ctx->exentry_idx++;
336 	return 0;
337 }
338