xref: /openbmc/linux/arch/powerpc/mm/init_32.c (revision ba007062)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *  PowerPC version
4  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
5  *
6  *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
7  *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
8  *    Copyright (C) 1996 Paul Mackerras
9  *  PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
10  *
11  *  Derived from "arch/i386/mm/init.c"
12  *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
13  */
14 
15 #include <linux/module.h>
16 #include <linux/sched.h>
17 #include <linux/kernel.h>
18 #include <linux/errno.h>
19 #include <linux/string.h>
20 #include <linux/types.h>
21 #include <linux/mm.h>
22 #include <linux/stddef.h>
23 #include <linux/init.h>
24 #include <linux/highmem.h>
25 #include <linux/initrd.h>
26 #include <linux/pagemap.h>
27 #include <linux/memblock.h>
28 #include <linux/gfp.h>
29 #include <linux/slab.h>
30 #include <linux/hugetlb.h>
31 
32 #include <asm/io.h>
33 #include <asm/mmu.h>
34 #include <asm/smp.h>
35 #include <asm/machdep.h>
36 #include <asm/btext.h>
37 #include <asm/tlb.h>
38 #include <asm/sections.h>
39 #include <asm/hugetlb.h>
40 #include <asm/kup.h>
41 #include <asm/kasan.h>
42 
43 #include <mm/mmu_decl.h>
44 
45 #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
46 /* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
47 #if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET))
48 #error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_KERNEL_START"
49 #endif
50 #endif
51 #define MAX_LOW_MEM	CONFIG_LOWMEM_SIZE
52 
53 phys_addr_t total_memory;
54 phys_addr_t total_lowmem;
55 
56 #ifdef CONFIG_RELOCATABLE
57 /* Used in __va()/__pa() */
58 long long virt_phys_offset;
59 EXPORT_SYMBOL(virt_phys_offset);
60 #endif
61 
62 phys_addr_t lowmem_end_addr;
63 
64 int boot_mapsize;
65 #ifdef CONFIG_PPC_PMAC
66 unsigned long agp_special_page;
67 EXPORT_SYMBOL(agp_special_page);
68 #endif
69 
70 void MMU_init(void);
71 
72 /* max amount of low RAM to map in */
73 unsigned long __max_low_memory = MAX_LOW_MEM;
74 
75 /*
76  * MMU_init sets up the basic memory mappings for the kernel,
77  * including both RAM and possibly some I/O regions,
78  * and sets up the page tables and the MMU hardware ready to go.
79  */
80 void __init MMU_init(void)
81 {
82 	if (ppc_md.progress)
83 		ppc_md.progress("MMU:enter", 0x111);
84 
85 	/*
86 	 * Reserve gigantic pages for hugetlb.  This MUST occur before
87 	 * lowmem_end_addr is initialized below.
88 	 */
89 	if (memblock.memory.cnt > 1) {
90 #ifndef CONFIG_WII
91 		memblock_enforce_memory_limit(memblock.memory.regions[0].size);
92 		pr_warn("Only using first contiguous memory region\n");
93 #else
94 		wii_memory_fixups();
95 #endif
96 	}
97 
98 	total_lowmem = total_memory = memblock_end_of_DRAM() - memstart_addr;
99 	lowmem_end_addr = memstart_addr + total_lowmem;
100 
101 #ifdef CONFIG_FSL_BOOKE
102 	/* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
103 	 * entries, so we need to adjust lowmem to match the amount we can map
104 	 * in the fixed entries */
105 	adjust_total_lowmem();
106 #endif /* CONFIG_FSL_BOOKE */
107 
108 	if (total_lowmem > __max_low_memory) {
109 		total_lowmem = __max_low_memory;
110 		lowmem_end_addr = memstart_addr + total_lowmem;
111 #ifndef CONFIG_HIGHMEM
112 		total_memory = total_lowmem;
113 		memblock_enforce_memory_limit(total_lowmem);
114 #endif /* CONFIG_HIGHMEM */
115 	}
116 
117 	/* Initialize the MMU hardware */
118 	if (ppc_md.progress)
119 		ppc_md.progress("MMU:hw init", 0x300);
120 	MMU_init_hw();
121 
122 	/* Map in all of RAM starting at KERNELBASE */
123 	if (ppc_md.progress)
124 		ppc_md.progress("MMU:mapin", 0x301);
125 	mapin_ram();
126 
127 	/* Initialize early top-down ioremap allocator */
128 	ioremap_bot = IOREMAP_TOP;
129 
130 	if (ppc_md.progress)
131 		ppc_md.progress("MMU:exit", 0x211);
132 
133 	/* From now on, btext is no longer BAT mapped if it was at all */
134 #ifdef CONFIG_BOOTX_TEXT
135 	btext_unmap();
136 #endif
137 
138 	kasan_mmu_init();
139 
140 	setup_kup();
141 
142 	/* Shortly after that, the entire linear mapping will be available */
143 	memblock_set_current_limit(lowmem_end_addr);
144 }
145