xref: /openbmc/linux/arch/powerpc/mm/init_32.c (revision 12eb4683)
1 /*
2  *  PowerPC version
3  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
4  *
5  *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
6  *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
7  *    Copyright (C) 1996 Paul Mackerras
8  *  PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
9  *
10  *  Derived from "arch/i386/mm/init.c"
11  *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
12  *
13  *  This program is free software; you can redistribute it and/or
14  *  modify it under the terms of the GNU General Public License
15  *  as published by the Free Software Foundation; either version
16  *  2 of the License, or (at your option) any later version.
17  *
18  */
19 
20 #include <linux/module.h>
21 #include <linux/sched.h>
22 #include <linux/kernel.h>
23 #include <linux/errno.h>
24 #include <linux/string.h>
25 #include <linux/types.h>
26 #include <linux/mm.h>
27 #include <linux/stddef.h>
28 #include <linux/init.h>
29 #include <linux/bootmem.h>
30 #include <linux/highmem.h>
31 #include <linux/initrd.h>
32 #include <linux/pagemap.h>
33 #include <linux/memblock.h>
34 #include <linux/gfp.h>
35 #include <linux/slab.h>
36 #include <linux/hugetlb.h>
37 
38 #include <asm/pgalloc.h>
39 #include <asm/prom.h>
40 #include <asm/io.h>
41 #include <asm/pgtable.h>
42 #include <asm/mmu.h>
43 #include <asm/smp.h>
44 #include <asm/machdep.h>
45 #include <asm/btext.h>
46 #include <asm/tlb.h>
47 #include <asm/sections.h>
48 #include <asm/hugetlb.h>
49 
50 #include "mmu_decl.h"
51 
52 #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
53 /* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
54 #if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET))
55 #error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_KERNEL_START"
56 #endif
57 #endif
58 #define MAX_LOW_MEM	CONFIG_LOWMEM_SIZE
59 
60 phys_addr_t total_memory;
61 phys_addr_t total_lowmem;
62 
63 phys_addr_t memstart_addr = (phys_addr_t)~0ull;
64 EXPORT_SYMBOL(memstart_addr);
65 phys_addr_t kernstart_addr;
66 EXPORT_SYMBOL(kernstart_addr);
67 
68 #ifdef CONFIG_RELOCATABLE_PPC32
69 /* Used in __va()/__pa() */
70 long long virt_phys_offset;
71 EXPORT_SYMBOL(virt_phys_offset);
72 #endif
73 
74 phys_addr_t lowmem_end_addr;
75 
76 int boot_mapsize;
77 #ifdef CONFIG_PPC_PMAC
78 unsigned long agp_special_page;
79 EXPORT_SYMBOL(agp_special_page);
80 #endif
81 
82 void MMU_init(void);
83 
84 /* XXX should be in current.h  -- paulus */
85 extern struct task_struct *current_set[NR_CPUS];
86 
87 /*
88  * this tells the system to map all of ram with the segregs
89  * (i.e. page tables) instead of the bats.
90  * -- Cort
91  */
92 int __map_without_bats;
93 int __map_without_ltlbs;
94 
95 /*
96  * This tells the system to allow ioremapping memory marked as reserved.
97  */
98 int __allow_ioremap_reserved;
99 
100 /* max amount of low RAM to map in */
101 unsigned long __max_low_memory = MAX_LOW_MEM;
102 
103 /*
104  * Check for command-line options that affect what MMU_init will do.
105  */
106 void MMU_setup(void)
107 {
108 	/* Check for nobats option (used in mapin_ram). */
109 	if (strstr(cmd_line, "nobats")) {
110 		__map_without_bats = 1;
111 	}
112 
113 	if (strstr(cmd_line, "noltlbs")) {
114 		__map_without_ltlbs = 1;
115 	}
116 #ifdef CONFIG_DEBUG_PAGEALLOC
117 	__map_without_bats = 1;
118 	__map_without_ltlbs = 1;
119 #endif
120 }
121 
122 /*
123  * MMU_init sets up the basic memory mappings for the kernel,
124  * including both RAM and possibly some I/O regions,
125  * and sets up the page tables and the MMU hardware ready to go.
126  */
127 void __init MMU_init(void)
128 {
129 	if (ppc_md.progress)
130 		ppc_md.progress("MMU:enter", 0x111);
131 
132 	/* parse args from command line */
133 	MMU_setup();
134 
135 	/*
136 	 * Reserve gigantic pages for hugetlb.  This MUST occur before
137 	 * lowmem_end_addr is initialized below.
138 	 */
139 	reserve_hugetlb_gpages();
140 
141 	if (memblock.memory.cnt > 1) {
142 #ifndef CONFIG_WII
143 		memblock_enforce_memory_limit(memblock.memory.regions[0].size);
144 		printk(KERN_WARNING "Only using first contiguous memory region");
145 #else
146 		wii_memory_fixups();
147 #endif
148 	}
149 
150 	total_lowmem = total_memory = memblock_end_of_DRAM() - memstart_addr;
151 	lowmem_end_addr = memstart_addr + total_lowmem;
152 
153 #ifdef CONFIG_FSL_BOOKE
154 	/* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
155 	 * entries, so we need to adjust lowmem to match the amount we can map
156 	 * in the fixed entries */
157 	adjust_total_lowmem();
158 #endif /* CONFIG_FSL_BOOKE */
159 
160 	if (total_lowmem > __max_low_memory) {
161 		total_lowmem = __max_low_memory;
162 		lowmem_end_addr = memstart_addr + total_lowmem;
163 #ifndef CONFIG_HIGHMEM
164 		total_memory = total_lowmem;
165 		memblock_enforce_memory_limit(total_lowmem);
166 #endif /* CONFIG_HIGHMEM */
167 	}
168 
169 	/* Initialize the MMU hardware */
170 	if (ppc_md.progress)
171 		ppc_md.progress("MMU:hw init", 0x300);
172 	MMU_init_hw();
173 
174 	/* Map in all of RAM starting at KERNELBASE */
175 	if (ppc_md.progress)
176 		ppc_md.progress("MMU:mapin", 0x301);
177 	mapin_ram();
178 
179 	/* Initialize early top-down ioremap allocator */
180 	ioremap_bot = IOREMAP_TOP;
181 
182 	/* Map in I/O resources */
183 	if (ppc_md.progress)
184 		ppc_md.progress("MMU:setio", 0x302);
185 
186 	if (ppc_md.progress)
187 		ppc_md.progress("MMU:exit", 0x211);
188 
189 	/* From now on, btext is no longer BAT mapped if it was at all */
190 #ifdef CONFIG_BOOTX_TEXT
191 	btext_unmap();
192 #endif
193 
194 	/* Shortly after that, the entire linear mapping will be available */
195 	memblock_set_current_limit(lowmem_end_addr);
196 }
197 
198 /* This is only called until mem_init is done. */
199 void __init *early_get_page(void)
200 {
201 	if (init_bootmem_done)
202 		return alloc_bootmem_pages(PAGE_SIZE);
203 	else
204 		return __va(memblock_alloc(PAGE_SIZE, PAGE_SIZE));
205 }
206 
207 #ifdef CONFIG_8xx /* No 8xx specific .c file to put that in ... */
208 void setup_initial_memory_limit(phys_addr_t first_memblock_base,
209 				phys_addr_t first_memblock_size)
210 {
211 	/* We don't currently support the first MEMBLOCK not mapping 0
212 	 * physical on those processors
213 	 */
214 	BUG_ON(first_memblock_base != 0);
215 
216 #ifdef CONFIG_PIN_TLB
217 	/* 8xx can only access 24MB at the moment */
218 	memblock_set_current_limit(min_t(u64, first_memblock_size, 0x01800000));
219 #else
220 	/* 8xx can only access 8MB at the moment */
221 	memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000));
222 #endif
223 }
224 #endif /* CONFIG_8xx */
225