1 /* 2 * PowerPC version 3 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) 4 * 5 * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) 6 * and Cort Dougan (PReP) (cort@cs.nmt.edu) 7 * Copyright (C) 1996 Paul Mackerras 8 * PPC44x/36-bit changes by Matt Porter (mporter@mvista.com) 9 * 10 * Derived from "arch/i386/mm/init.c" 11 * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds 12 * 13 * This program is free software; you can redistribute it and/or 14 * modify it under the terms of the GNU General Public License 15 * as published by the Free Software Foundation; either version 16 * 2 of the License, or (at your option) any later version. 17 * 18 */ 19 20 #include <linux/module.h> 21 #include <linux/sched.h> 22 #include <linux/kernel.h> 23 #include <linux/errno.h> 24 #include <linux/string.h> 25 #include <linux/types.h> 26 #include <linux/mm.h> 27 #include <linux/stddef.h> 28 #include <linux/init.h> 29 #include <linux/highmem.h> 30 #include <linux/initrd.h> 31 #include <linux/pagemap.h> 32 #include <linux/memblock.h> 33 #include <linux/gfp.h> 34 #include <linux/slab.h> 35 #include <linux/hugetlb.h> 36 37 #include <asm/pgalloc.h> 38 #include <asm/prom.h> 39 #include <asm/io.h> 40 #include <asm/pgtable.h> 41 #include <asm/mmu.h> 42 #include <asm/smp.h> 43 #include <asm/machdep.h> 44 #include <asm/btext.h> 45 #include <asm/tlb.h> 46 #include <asm/sections.h> 47 #include <asm/hugetlb.h> 48 49 #include "mmu_decl.h" 50 51 #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL) 52 /* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */ 53 #if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET)) 54 #error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_KERNEL_START" 55 #endif 56 #endif 57 #define MAX_LOW_MEM CONFIG_LOWMEM_SIZE 58 59 phys_addr_t total_memory; 60 phys_addr_t total_lowmem; 61 62 phys_addr_t memstart_addr = (phys_addr_t)~0ull; 63 EXPORT_SYMBOL(memstart_addr); 64 phys_addr_t kernstart_addr; 65 EXPORT_SYMBOL(kernstart_addr); 66 67 #ifdef CONFIG_RELOCATABLE_PPC32 68 /* Used in __va()/__pa() */ 69 long long virt_phys_offset; 70 EXPORT_SYMBOL(virt_phys_offset); 71 #endif 72 73 phys_addr_t lowmem_end_addr; 74 75 int boot_mapsize; 76 #ifdef CONFIG_PPC_PMAC 77 unsigned long agp_special_page; 78 EXPORT_SYMBOL(agp_special_page); 79 #endif 80 81 void MMU_init(void); 82 83 /* XXX should be in current.h -- paulus */ 84 extern struct task_struct *current_set[NR_CPUS]; 85 86 /* 87 * this tells the system to map all of ram with the segregs 88 * (i.e. page tables) instead of the bats. 89 * -- Cort 90 */ 91 int __map_without_bats; 92 int __map_without_ltlbs; 93 94 /* 95 * This tells the system to allow ioremapping memory marked as reserved. 96 */ 97 int __allow_ioremap_reserved; 98 99 /* max amount of low RAM to map in */ 100 unsigned long __max_low_memory = MAX_LOW_MEM; 101 102 /* 103 * Check for command-line options that affect what MMU_init will do. 104 */ 105 void __init MMU_setup(void) 106 { 107 /* Check for nobats option (used in mapin_ram). */ 108 if (strstr(boot_command_line, "nobats")) { 109 __map_without_bats = 1; 110 } 111 112 if (strstr(boot_command_line, "noltlbs")) { 113 __map_without_ltlbs = 1; 114 } 115 if (debug_pagealloc_enabled()) { 116 __map_without_bats = 1; 117 __map_without_ltlbs = 1; 118 } 119 } 120 121 /* 122 * MMU_init sets up the basic memory mappings for the kernel, 123 * including both RAM and possibly some I/O regions, 124 * and sets up the page tables and the MMU hardware ready to go. 125 */ 126 void __init MMU_init(void) 127 { 128 if (ppc_md.progress) 129 ppc_md.progress("MMU:enter", 0x111); 130 131 /* parse args from command line */ 132 MMU_setup(); 133 134 /* 135 * Reserve gigantic pages for hugetlb. This MUST occur before 136 * lowmem_end_addr is initialized below. 137 */ 138 reserve_hugetlb_gpages(); 139 140 if (memblock.memory.cnt > 1) { 141 #ifndef CONFIG_WII 142 memblock_enforce_memory_limit(memblock.memory.regions[0].size); 143 printk(KERN_WARNING "Only using first contiguous memory region"); 144 #else 145 wii_memory_fixups(); 146 #endif 147 } 148 149 total_lowmem = total_memory = memblock_end_of_DRAM() - memstart_addr; 150 lowmem_end_addr = memstart_addr + total_lowmem; 151 152 #ifdef CONFIG_FSL_BOOKE 153 /* Freescale Book-E parts expect lowmem to be mapped by fixed TLB 154 * entries, so we need to adjust lowmem to match the amount we can map 155 * in the fixed entries */ 156 adjust_total_lowmem(); 157 #endif /* CONFIG_FSL_BOOKE */ 158 159 if (total_lowmem > __max_low_memory) { 160 total_lowmem = __max_low_memory; 161 lowmem_end_addr = memstart_addr + total_lowmem; 162 #ifndef CONFIG_HIGHMEM 163 total_memory = total_lowmem; 164 memblock_enforce_memory_limit(total_lowmem); 165 #endif /* CONFIG_HIGHMEM */ 166 } 167 168 /* Initialize the MMU hardware */ 169 if (ppc_md.progress) 170 ppc_md.progress("MMU:hw init", 0x300); 171 MMU_init_hw(); 172 173 /* Map in all of RAM starting at KERNELBASE */ 174 if (ppc_md.progress) 175 ppc_md.progress("MMU:mapin", 0x301); 176 mapin_ram(); 177 178 /* Initialize early top-down ioremap allocator */ 179 ioremap_bot = IOREMAP_TOP; 180 181 if (ppc_md.progress) 182 ppc_md.progress("MMU:exit", 0x211); 183 184 /* From now on, btext is no longer BAT mapped if it was at all */ 185 #ifdef CONFIG_BOOTX_TEXT 186 btext_unmap(); 187 #endif 188 189 /* Shortly after that, the entire linear mapping will be available */ 190 memblock_set_current_limit(lowmem_end_addr); 191 } 192