xref: /openbmc/linux/arch/powerpc/mm/book3s64/hash_4k.c (revision 9659281c)
1 /*
2  * Copyright IBM Corporation, 2015
3  * Author Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU Lesser General Public License
7  * as published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it would be useful, but
10  * WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
12  *
13  */
14 
15 #include <linux/mm.h>
16 #include <asm/machdep.h>
17 #include <asm/mmu.h>
18 
19 int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
20 		   pte_t *ptep, unsigned long trap, unsigned long flags,
21 		   int ssize, int subpg_prot)
22 {
23 	real_pte_t rpte;
24 	unsigned long hpte_group;
25 	unsigned long rflags, pa;
26 	unsigned long old_pte, new_pte;
27 	unsigned long vpn, hash, slot;
28 	unsigned long shift = mmu_psize_defs[MMU_PAGE_4K].shift;
29 
30 	/*
31 	 * atomically mark the linux large page PTE busy and dirty
32 	 */
33 	do {
34 		pte_t pte = READ_ONCE(*ptep);
35 
36 		old_pte = pte_val(pte);
37 		/* If PTE busy, retry the access */
38 		if (unlikely(old_pte & H_PAGE_BUSY))
39 			return 0;
40 		/* If PTE permissions don't match, take page fault */
41 		if (unlikely(!check_pte_access(access, old_pte)))
42 			return 1;
43 		/*
44 		 * Try to lock the PTE, add ACCESSED and DIRTY if it was
45 		 * a write access. Since this is 4K insert of 64K page size
46 		 * also add H_PAGE_COMBO
47 		 */
48 		new_pte = old_pte | H_PAGE_BUSY | _PAGE_ACCESSED;
49 		if (access & _PAGE_WRITE)
50 			new_pte |= _PAGE_DIRTY;
51 	} while (!pte_xchg(ptep, __pte(old_pte), __pte(new_pte)));
52 
53 	/*
54 	 * PP bits. _PAGE_USER is already PP bit 0x2, so we only
55 	 * need to add in 0x1 if it's a read-only user page
56 	 */
57 	rflags = htab_convert_pte_flags(new_pte, flags);
58 	rpte = __real_pte(__pte(old_pte), ptep, PTRS_PER_PTE);
59 
60 	if (cpu_has_feature(CPU_FTR_NOEXECUTE) &&
61 	    !cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
62 		rflags = hash_page_do_lazy_icache(rflags, __pte(old_pte), trap);
63 
64 	vpn  = hpt_vpn(ea, vsid, ssize);
65 	if (unlikely(old_pte & H_PAGE_HASHPTE)) {
66 		/*
67 		 * There MIGHT be an HPTE for this pte
68 		 */
69 		unsigned long gslot = pte_get_hash_gslot(vpn, shift, ssize,
70 							 rpte, 0);
71 
72 		if (mmu_hash_ops.hpte_updatepp(gslot, rflags, vpn, MMU_PAGE_4K,
73 					       MMU_PAGE_4K, ssize, flags) == -1)
74 			old_pte &= ~_PAGE_HPTEFLAGS;
75 	}
76 
77 	if (likely(!(old_pte & H_PAGE_HASHPTE))) {
78 
79 		pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
80 		hash = hpt_hash(vpn, shift, ssize);
81 
82 repeat:
83 		hpte_group = (hash & htab_hash_mask) * HPTES_PER_GROUP;
84 
85 		/* Insert into the hash table, primary slot */
86 		slot = mmu_hash_ops.hpte_insert(hpte_group, vpn, pa, rflags, 0,
87 						MMU_PAGE_4K, MMU_PAGE_4K, ssize);
88 		/*
89 		 * Primary is full, try the secondary
90 		 */
91 		if (unlikely(slot == -1)) {
92 			hpte_group = (~hash & htab_hash_mask) * HPTES_PER_GROUP;
93 			slot = mmu_hash_ops.hpte_insert(hpte_group, vpn, pa,
94 							rflags,
95 							HPTE_V_SECONDARY,
96 							MMU_PAGE_4K,
97 							MMU_PAGE_4K, ssize);
98 			if (slot == -1) {
99 				if (mftb() & 0x1)
100 					hpte_group = (hash & htab_hash_mask) *
101 							HPTES_PER_GROUP;
102 				mmu_hash_ops.hpte_remove(hpte_group);
103 				/*
104 				 * FIXME!! Should be try the group from which we removed ?
105 				 */
106 				goto repeat;
107 			}
108 		}
109 		/*
110 		 * Hypervisor failure. Restore old pte and return -1
111 		 * similar to __hash_page_*
112 		 */
113 		if (unlikely(slot == -2)) {
114 			*ptep = __pte(old_pte);
115 			hash_failure_debug(ea, access, vsid, trap, ssize,
116 					   MMU_PAGE_4K, MMU_PAGE_4K, old_pte);
117 			return -1;
118 		}
119 		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | H_PAGE_HASHPTE;
120 		new_pte |= pte_set_hidx(ptep, rpte, 0, slot, PTRS_PER_PTE);
121 	}
122 	*ptep = __pte(new_pte & ~H_PAGE_BUSY);
123 	return 0;
124 }
125