1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * This file contains the routines for handling the MMU on those 4 * PowerPC implementations where the MMU substantially follows the 5 * architecture specification. This includes the 6xx, 7xx, 7xxx, 6 * and 8260 implementations but excludes the 8xx and 4xx. 7 * -- paulus 8 * 9 * Derived from arch/ppc/mm/init.c: 10 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) 11 * 12 * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) 13 * and Cort Dougan (PReP) (cort@cs.nmt.edu) 14 * Copyright (C) 1996 Paul Mackerras 15 * 16 * Derived from "arch/i386/mm/init.c" 17 * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds 18 */ 19 20 #include <linux/kernel.h> 21 #include <linux/mm.h> 22 #include <linux/init.h> 23 #include <linux/highmem.h> 24 #include <linux/memblock.h> 25 26 #include <asm/prom.h> 27 #include <asm/mmu.h> 28 #include <asm/machdep.h> 29 #include <asm/code-patching.h> 30 #include <asm/sections.h> 31 32 #include <mm/mmu_decl.h> 33 34 u8 __initdata early_hash[SZ_256K] __aligned(SZ_256K) = {0}; 35 36 static struct hash_pte __initdata *Hash = (struct hash_pte *)early_hash; 37 static unsigned long __initdata Hash_size, Hash_mask; 38 static unsigned int __initdata hash_mb, hash_mb2; 39 unsigned long __initdata _SDR1; 40 41 struct ppc_bat BATS[8][2]; /* 8 pairs of IBAT, DBAT */ 42 43 static struct batrange { /* stores address ranges mapped by BATs */ 44 unsigned long start; 45 unsigned long limit; 46 phys_addr_t phys; 47 } bat_addrs[8]; 48 49 #ifdef CONFIG_SMP 50 unsigned long mmu_hash_lock; 51 #endif 52 53 /* 54 * Return PA for this VA if it is mapped by a BAT, or 0 55 */ 56 phys_addr_t v_block_mapped(unsigned long va) 57 { 58 int b; 59 for (b = 0; b < ARRAY_SIZE(bat_addrs); ++b) 60 if (va >= bat_addrs[b].start && va < bat_addrs[b].limit) 61 return bat_addrs[b].phys + (va - bat_addrs[b].start); 62 return 0; 63 } 64 65 /* 66 * Return VA for a given PA or 0 if not mapped 67 */ 68 unsigned long p_block_mapped(phys_addr_t pa) 69 { 70 int b; 71 for (b = 0; b < ARRAY_SIZE(bat_addrs); ++b) 72 if (pa >= bat_addrs[b].phys 73 && pa < (bat_addrs[b].limit-bat_addrs[b].start) 74 +bat_addrs[b].phys) 75 return bat_addrs[b].start+(pa-bat_addrs[b].phys); 76 return 0; 77 } 78 79 static int __init find_free_bat(void) 80 { 81 int b; 82 int n = mmu_has_feature(MMU_FTR_USE_HIGH_BATS) ? 8 : 4; 83 84 for (b = 0; b < n; b++) { 85 struct ppc_bat *bat = BATS[b]; 86 87 if (!(bat[1].batu & 3)) 88 return b; 89 } 90 return -1; 91 } 92 93 /* 94 * This function calculates the size of the larger block usable to map the 95 * beginning of an area based on the start address and size of that area: 96 * - max block size is 256 on 6xx. 97 * - base address must be aligned to the block size. So the maximum block size 98 * is identified by the lowest bit set to 1 in the base address (for instance 99 * if base is 0x16000000, max size is 0x02000000). 100 * - block size has to be a power of two. This is calculated by finding the 101 * highest bit set to 1. 102 */ 103 static unsigned int block_size(unsigned long base, unsigned long top) 104 { 105 unsigned int max_size = SZ_256M; 106 unsigned int base_shift = (ffs(base) - 1) & 31; 107 unsigned int block_shift = (fls(top - base) - 1) & 31; 108 109 return min3(max_size, 1U << base_shift, 1U << block_shift); 110 } 111 112 /* 113 * Set up one of the IBAT (block address translation) register pairs. 114 * The parameters are not checked; in particular size must be a power 115 * of 2 between 128k and 256M. 116 */ 117 static void setibat(int index, unsigned long virt, phys_addr_t phys, 118 unsigned int size, pgprot_t prot) 119 { 120 unsigned int bl = (size >> 17) - 1; 121 int wimgxpp; 122 struct ppc_bat *bat = BATS[index]; 123 unsigned long flags = pgprot_val(prot); 124 125 if (!cpu_has_feature(CPU_FTR_NEED_COHERENT)) 126 flags &= ~_PAGE_COHERENT; 127 128 wimgxpp = (flags & _PAGE_COHERENT) | (_PAGE_EXEC ? BPP_RX : BPP_XX); 129 bat[0].batu = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */ 130 bat[0].batl = BAT_PHYS_ADDR(phys) | wimgxpp; 131 if (flags & _PAGE_USER) 132 bat[0].batu |= 1; /* Vp = 1 */ 133 } 134 135 static void clearibat(int index) 136 { 137 struct ppc_bat *bat = BATS[index]; 138 139 bat[0].batu = 0; 140 bat[0].batl = 0; 141 } 142 143 static unsigned long __init __mmu_mapin_ram(unsigned long base, unsigned long top) 144 { 145 int idx; 146 147 while ((idx = find_free_bat()) != -1 && base != top) { 148 unsigned int size = block_size(base, top); 149 150 if (size < 128 << 10) 151 break; 152 setbat(idx, PAGE_OFFSET + base, base, size, PAGE_KERNEL_X); 153 base += size; 154 } 155 156 return base; 157 } 158 159 unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top) 160 { 161 unsigned long done; 162 unsigned long border = (unsigned long)__init_begin - PAGE_OFFSET; 163 164 165 if (debug_pagealloc_enabled_or_kfence() || __map_without_bats) { 166 pr_debug_once("Read-Write memory mapped without BATs\n"); 167 if (base >= border) 168 return base; 169 if (top >= border) 170 top = border; 171 } 172 173 if (!strict_kernel_rwx_enabled() || base >= border || top <= border) 174 return __mmu_mapin_ram(base, top); 175 176 done = __mmu_mapin_ram(base, border); 177 if (done != border) 178 return done; 179 180 return __mmu_mapin_ram(border, top); 181 } 182 183 static bool is_module_segment(unsigned long addr) 184 { 185 if (!IS_ENABLED(CONFIG_MODULES)) 186 return false; 187 if (addr < ALIGN_DOWN(MODULES_VADDR, SZ_256M)) 188 return false; 189 if (addr > ALIGN(MODULES_END, SZ_256M) - 1) 190 return false; 191 return true; 192 } 193 194 void mmu_mark_initmem_nx(void) 195 { 196 int nb = mmu_has_feature(MMU_FTR_USE_HIGH_BATS) ? 8 : 4; 197 int i; 198 unsigned long base = (unsigned long)_stext - PAGE_OFFSET; 199 unsigned long top = ALIGN((unsigned long)_etext - PAGE_OFFSET, SZ_128K); 200 unsigned long border = (unsigned long)__init_begin - PAGE_OFFSET; 201 unsigned long size; 202 203 for (i = 0; i < nb - 1 && base < top;) { 204 size = block_size(base, top); 205 setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_TEXT); 206 base += size; 207 } 208 if (base < top) { 209 size = block_size(base, top); 210 if ((top - base) > size) { 211 size <<= 1; 212 if (strict_kernel_rwx_enabled() && base + size > border) 213 pr_warn("Some RW data is getting mapped X. " 214 "Adjust CONFIG_DATA_SHIFT to avoid that.\n"); 215 } 216 setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_TEXT); 217 base += size; 218 } 219 for (; i < nb; i++) 220 clearibat(i); 221 222 update_bats(); 223 224 for (i = TASK_SIZE >> 28; i < 16; i++) { 225 /* Do not set NX on VM space for modules */ 226 if (is_module_segment(i << 28)) 227 continue; 228 229 mtsr(mfsr(i << 28) | 0x10000000, i << 28); 230 } 231 } 232 233 void mmu_mark_rodata_ro(void) 234 { 235 int nb = mmu_has_feature(MMU_FTR_USE_HIGH_BATS) ? 8 : 4; 236 int i; 237 238 for (i = 0; i < nb; i++) { 239 struct ppc_bat *bat = BATS[i]; 240 241 if (bat_addrs[i].start < (unsigned long)__init_begin) 242 bat[1].batl = (bat[1].batl & ~BPP_RW) | BPP_RX; 243 } 244 245 update_bats(); 246 } 247 248 /* 249 * Set up one of the I/D BAT (block address translation) register pairs. 250 * The parameters are not checked; in particular size must be a power 251 * of 2 between 128k and 256M. 252 * On 603+, only set IBAT when _PAGE_EXEC is set 253 */ 254 void __init setbat(int index, unsigned long virt, phys_addr_t phys, 255 unsigned int size, pgprot_t prot) 256 { 257 unsigned int bl; 258 int wimgxpp; 259 struct ppc_bat *bat; 260 unsigned long flags = pgprot_val(prot); 261 262 if (index == -1) 263 index = find_free_bat(); 264 if (index == -1) { 265 pr_err("%s: no BAT available for mapping 0x%llx\n", __func__, 266 (unsigned long long)phys); 267 return; 268 } 269 bat = BATS[index]; 270 271 if ((flags & _PAGE_NO_CACHE) || 272 (cpu_has_feature(CPU_FTR_NEED_COHERENT) == 0)) 273 flags &= ~_PAGE_COHERENT; 274 275 bl = (size >> 17) - 1; 276 /* Do DBAT first */ 277 wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE 278 | _PAGE_COHERENT | _PAGE_GUARDED); 279 wimgxpp |= (flags & _PAGE_RW)? BPP_RW: BPP_RX; 280 bat[1].batu = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */ 281 bat[1].batl = BAT_PHYS_ADDR(phys) | wimgxpp; 282 if (flags & _PAGE_USER) 283 bat[1].batu |= 1; /* Vp = 1 */ 284 if (flags & _PAGE_GUARDED) { 285 /* G bit must be zero in IBATs */ 286 flags &= ~_PAGE_EXEC; 287 } 288 if (flags & _PAGE_EXEC) 289 bat[0] = bat[1]; 290 else 291 bat[0].batu = bat[0].batl = 0; 292 293 bat_addrs[index].start = virt; 294 bat_addrs[index].limit = virt + ((bl + 1) << 17) - 1; 295 bat_addrs[index].phys = phys; 296 } 297 298 /* 299 * Preload a translation in the hash table 300 */ 301 static void hash_preload(struct mm_struct *mm, unsigned long ea) 302 { 303 pmd_t *pmd; 304 305 if (!mmu_has_feature(MMU_FTR_HPTE_TABLE)) 306 return; 307 pmd = pmd_off(mm, ea); 308 if (!pmd_none(*pmd)) 309 add_hash_page(mm->context.id, ea, pmd_val(*pmd)); 310 } 311 312 /* 313 * This is called at the end of handling a user page fault, when the 314 * fault has been handled by updating a PTE in the linux page tables. 315 * We use it to preload an HPTE into the hash table corresponding to 316 * the updated linux PTE. 317 * 318 * This must always be called with the pte lock held. 319 */ 320 void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, 321 pte_t *ptep) 322 { 323 if (!mmu_has_feature(MMU_FTR_HPTE_TABLE)) 324 return; 325 /* 326 * We don't need to worry about _PAGE_PRESENT here because we are 327 * called with either mm->page_table_lock held or ptl lock held 328 */ 329 330 /* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */ 331 if (!pte_young(*ptep) || address >= TASK_SIZE) 332 return; 333 334 /* We have to test for regs NULL since init will get here first thing at boot */ 335 if (!current->thread.regs) 336 return; 337 338 /* We also avoid filling the hash if not coming from a fault */ 339 if (TRAP(current->thread.regs) != 0x300 && TRAP(current->thread.regs) != 0x400) 340 return; 341 342 hash_preload(vma->vm_mm, address); 343 } 344 345 /* 346 * Initialize the hash table and patch the instructions in hashtable.S. 347 */ 348 void __init MMU_init_hw(void) 349 { 350 unsigned int n_hpteg, lg_n_hpteg; 351 352 if (!mmu_has_feature(MMU_FTR_HPTE_TABLE)) 353 return; 354 355 if ( ppc_md.progress ) ppc_md.progress("hash:enter", 0x105); 356 357 #define LG_HPTEG_SIZE 6 /* 64 bytes per HPTEG */ 358 #define SDR1_LOW_BITS ((n_hpteg - 1) >> 10) 359 #define MIN_N_HPTEG 1024 /* min 64kB hash table */ 360 361 /* 362 * Allow 1 HPTE (1/8 HPTEG) for each page of memory. 363 * This is less than the recommended amount, but then 364 * Linux ain't AIX. 365 */ 366 n_hpteg = total_memory / (PAGE_SIZE * 8); 367 if (n_hpteg < MIN_N_HPTEG) 368 n_hpteg = MIN_N_HPTEG; 369 lg_n_hpteg = __ilog2(n_hpteg); 370 if (n_hpteg & (n_hpteg - 1)) { 371 ++lg_n_hpteg; /* round up if not power of 2 */ 372 n_hpteg = 1 << lg_n_hpteg; 373 } 374 Hash_size = n_hpteg << LG_HPTEG_SIZE; 375 376 /* 377 * Find some memory for the hash table. 378 */ 379 if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322); 380 Hash = memblock_alloc(Hash_size, Hash_size); 381 if (!Hash) 382 panic("%s: Failed to allocate %lu bytes align=0x%lx\n", 383 __func__, Hash_size, Hash_size); 384 _SDR1 = __pa(Hash) | SDR1_LOW_BITS; 385 386 pr_info("Total memory = %lldMB; using %ldkB for hash table\n", 387 (unsigned long long)(total_memory >> 20), Hash_size >> 10); 388 389 390 Hash_mask = n_hpteg - 1; 391 hash_mb2 = hash_mb = 32 - LG_HPTEG_SIZE - lg_n_hpteg; 392 if (lg_n_hpteg > 16) 393 hash_mb2 = 16 - LG_HPTEG_SIZE; 394 } 395 396 void __init MMU_init_hw_patch(void) 397 { 398 unsigned int hmask = Hash_mask >> (16 - LG_HPTEG_SIZE); 399 unsigned int hash = (unsigned int)Hash - PAGE_OFFSET; 400 401 if (!mmu_has_feature(MMU_FTR_HPTE_TABLE)) 402 return; 403 404 if (ppc_md.progress) 405 ppc_md.progress("hash:patch", 0x345); 406 if (ppc_md.progress) 407 ppc_md.progress("hash:done", 0x205); 408 409 /* WARNING: Make sure nothing can trigger a KASAN check past this point */ 410 411 /* 412 * Patch up the instructions in hashtable.S:create_hpte 413 */ 414 modify_instruction_site(&patch__hash_page_A0, 0xffff, hash >> 16); 415 modify_instruction_site(&patch__hash_page_A1, 0x7c0, hash_mb << 6); 416 modify_instruction_site(&patch__hash_page_A2, 0x7c0, hash_mb2 << 6); 417 modify_instruction_site(&patch__hash_page_B, 0xffff, hmask); 418 modify_instruction_site(&patch__hash_page_C, 0xffff, hmask); 419 420 /* 421 * Patch up the instructions in hashtable.S:flush_hash_page 422 */ 423 modify_instruction_site(&patch__flush_hash_A0, 0xffff, hash >> 16); 424 modify_instruction_site(&patch__flush_hash_A1, 0x7c0, hash_mb << 6); 425 modify_instruction_site(&patch__flush_hash_A2, 0x7c0, hash_mb2 << 6); 426 modify_instruction_site(&patch__flush_hash_B, 0xffff, hmask); 427 } 428 429 void setup_initial_memory_limit(phys_addr_t first_memblock_base, 430 phys_addr_t first_memblock_size) 431 { 432 /* We don't currently support the first MEMBLOCK not mapping 0 433 * physical on those processors 434 */ 435 BUG_ON(first_memblock_base != 0); 436 437 memblock_set_current_limit(min_t(u64, first_memblock_size, SZ_256M)); 438 } 439 440 void __init print_system_hash_info(void) 441 { 442 pr_info("Hash_size = 0x%lx\n", Hash_size); 443 if (Hash_mask) 444 pr_info("Hash_mask = 0x%lx\n", Hash_mask); 445 } 446 447 void __init early_init_mmu(void) 448 { 449 } 450