1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * This file contains the routines for handling the MMU on those 4 * PowerPC implementations where the MMU substantially follows the 5 * architecture specification. This includes the 6xx, 7xx, 7xxx, 6 * and 8260 implementations but excludes the 8xx and 4xx. 7 * -- paulus 8 * 9 * Derived from arch/ppc/mm/init.c: 10 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) 11 * 12 * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) 13 * and Cort Dougan (PReP) (cort@cs.nmt.edu) 14 * Copyright (C) 1996 Paul Mackerras 15 * 16 * Derived from "arch/i386/mm/init.c" 17 * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds 18 */ 19 20 #include <linux/kernel.h> 21 #include <linux/mm.h> 22 #include <linux/init.h> 23 #include <linux/highmem.h> 24 #include <linux/memblock.h> 25 26 #include <asm/mmu.h> 27 #include <asm/machdep.h> 28 #include <asm/code-patching.h> 29 #include <asm/sections.h> 30 31 #include <mm/mmu_decl.h> 32 33 u8 __initdata early_hash[SZ_256K] __aligned(SZ_256K) = {0}; 34 35 static struct hash_pte __initdata *Hash = (struct hash_pte *)early_hash; 36 static unsigned long __initdata Hash_size, Hash_mask; 37 static unsigned int __initdata hash_mb, hash_mb2; 38 unsigned long __initdata _SDR1; 39 40 struct ppc_bat BATS[8][2]; /* 8 pairs of IBAT, DBAT */ 41 42 static struct batrange { /* stores address ranges mapped by BATs */ 43 unsigned long start; 44 unsigned long limit; 45 phys_addr_t phys; 46 } bat_addrs[8]; 47 48 #ifdef CONFIG_SMP 49 unsigned long mmu_hash_lock; 50 #endif 51 52 /* 53 * Return PA for this VA if it is mapped by a BAT, or 0 54 */ 55 phys_addr_t v_block_mapped(unsigned long va) 56 { 57 int b; 58 for (b = 0; b < ARRAY_SIZE(bat_addrs); ++b) 59 if (va >= bat_addrs[b].start && va < bat_addrs[b].limit) 60 return bat_addrs[b].phys + (va - bat_addrs[b].start); 61 return 0; 62 } 63 64 /* 65 * Return VA for a given PA or 0 if not mapped 66 */ 67 unsigned long p_block_mapped(phys_addr_t pa) 68 { 69 int b; 70 for (b = 0; b < ARRAY_SIZE(bat_addrs); ++b) 71 if (pa >= bat_addrs[b].phys 72 && pa < (bat_addrs[b].limit-bat_addrs[b].start) 73 +bat_addrs[b].phys) 74 return bat_addrs[b].start+(pa-bat_addrs[b].phys); 75 return 0; 76 } 77 78 int __init find_free_bat(void) 79 { 80 int b; 81 int n = mmu_has_feature(MMU_FTR_USE_HIGH_BATS) ? 8 : 4; 82 83 for (b = 0; b < n; b++) { 84 struct ppc_bat *bat = BATS[b]; 85 86 if (!(bat[1].batu & 3)) 87 return b; 88 } 89 return -1; 90 } 91 92 /* 93 * This function calculates the size of the larger block usable to map the 94 * beginning of an area based on the start address and size of that area: 95 * - max block size is 256 on 6xx. 96 * - base address must be aligned to the block size. So the maximum block size 97 * is identified by the lowest bit set to 1 in the base address (for instance 98 * if base is 0x16000000, max size is 0x02000000). 99 * - block size has to be a power of two. This is calculated by finding the 100 * highest bit set to 1. 101 */ 102 unsigned int bat_block_size(unsigned long base, unsigned long top) 103 { 104 unsigned int max_size = SZ_256M; 105 unsigned int base_shift = (ffs(base) - 1) & 31; 106 unsigned int block_shift = (fls(top - base) - 1) & 31; 107 108 return min3(max_size, 1U << base_shift, 1U << block_shift); 109 } 110 111 /* 112 * Set up one of the IBAT (block address translation) register pairs. 113 * The parameters are not checked; in particular size must be a power 114 * of 2 between 128k and 256M. 115 */ 116 static void setibat(int index, unsigned long virt, phys_addr_t phys, 117 unsigned int size, pgprot_t prot) 118 { 119 unsigned int bl = (size >> 17) - 1; 120 int wimgxpp; 121 struct ppc_bat *bat = BATS[index]; 122 unsigned long flags = pgprot_val(prot); 123 124 if (!cpu_has_feature(CPU_FTR_NEED_COHERENT)) 125 flags &= ~_PAGE_COHERENT; 126 127 wimgxpp = (flags & _PAGE_COHERENT) | (_PAGE_EXEC ? BPP_RX : BPP_XX); 128 bat[0].batu = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */ 129 bat[0].batl = BAT_PHYS_ADDR(phys) | wimgxpp; 130 if (flags & _PAGE_USER) 131 bat[0].batu |= 1; /* Vp = 1 */ 132 } 133 134 static void clearibat(int index) 135 { 136 struct ppc_bat *bat = BATS[index]; 137 138 bat[0].batu = 0; 139 bat[0].batl = 0; 140 } 141 142 static unsigned long __init __mmu_mapin_ram(unsigned long base, unsigned long top) 143 { 144 int idx; 145 146 while ((idx = find_free_bat()) != -1 && base != top) { 147 unsigned int size = bat_block_size(base, top); 148 149 if (size < 128 << 10) 150 break; 151 setbat(idx, PAGE_OFFSET + base, base, size, PAGE_KERNEL_X); 152 base += size; 153 } 154 155 return base; 156 } 157 158 unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top) 159 { 160 unsigned long done; 161 unsigned long border = (unsigned long)__init_begin - PAGE_OFFSET; 162 unsigned long size; 163 164 size = roundup_pow_of_two((unsigned long)_einittext - PAGE_OFFSET); 165 setibat(0, PAGE_OFFSET, 0, size, PAGE_KERNEL_X); 166 167 if (debug_pagealloc_enabled_or_kfence()) { 168 pr_debug_once("Read-Write memory mapped without BATs\n"); 169 if (base >= border) 170 return base; 171 if (top >= border) 172 top = border; 173 } 174 175 if (!strict_kernel_rwx_enabled() || base >= border || top <= border) 176 return __mmu_mapin_ram(base, top); 177 178 done = __mmu_mapin_ram(base, border); 179 if (done != border) 180 return done; 181 182 return __mmu_mapin_ram(border, top); 183 } 184 185 static bool is_module_segment(unsigned long addr) 186 { 187 if (!IS_ENABLED(CONFIG_MODULES)) 188 return false; 189 if (addr < ALIGN_DOWN(MODULES_VADDR, SZ_256M)) 190 return false; 191 if (addr > ALIGN(MODULES_END, SZ_256M) - 1) 192 return false; 193 return true; 194 } 195 196 void mmu_mark_initmem_nx(void) 197 { 198 int nb = mmu_has_feature(MMU_FTR_USE_HIGH_BATS) ? 8 : 4; 199 int i; 200 unsigned long base = (unsigned long)_stext - PAGE_OFFSET; 201 unsigned long top = ALIGN((unsigned long)_etext - PAGE_OFFSET, SZ_128K); 202 unsigned long border = (unsigned long)__init_begin - PAGE_OFFSET; 203 unsigned long size; 204 205 for (i = 0; i < nb - 1 && base < top;) { 206 size = bat_block_size(base, top); 207 setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_TEXT); 208 base += size; 209 } 210 if (base < top) { 211 size = bat_block_size(base, top); 212 if ((top - base) > size) { 213 size <<= 1; 214 if (strict_kernel_rwx_enabled() && base + size > border) 215 pr_warn("Some RW data is getting mapped X. " 216 "Adjust CONFIG_DATA_SHIFT to avoid that.\n"); 217 } 218 setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_TEXT); 219 base += size; 220 } 221 for (; i < nb; i++) 222 clearibat(i); 223 224 update_bats(); 225 226 for (i = TASK_SIZE >> 28; i < 16; i++) { 227 /* Do not set NX on VM space for modules */ 228 if (is_module_segment(i << 28)) 229 continue; 230 231 mtsr(mfsr(i << 28) | 0x10000000, i << 28); 232 } 233 } 234 235 void mmu_mark_rodata_ro(void) 236 { 237 int nb = mmu_has_feature(MMU_FTR_USE_HIGH_BATS) ? 8 : 4; 238 int i; 239 240 for (i = 0; i < nb; i++) { 241 struct ppc_bat *bat = BATS[i]; 242 243 if (bat_addrs[i].start < (unsigned long)__init_begin) 244 bat[1].batl = (bat[1].batl & ~BPP_RW) | BPP_RX; 245 } 246 247 update_bats(); 248 } 249 250 /* 251 * Set up one of the D BAT (block address translation) register pairs. 252 * The parameters are not checked; in particular size must be a power 253 * of 2 between 128k and 256M. 254 */ 255 void __init setbat(int index, unsigned long virt, phys_addr_t phys, 256 unsigned int size, pgprot_t prot) 257 { 258 unsigned int bl; 259 int wimgxpp; 260 struct ppc_bat *bat; 261 unsigned long flags = pgprot_val(prot); 262 263 if (index == -1) 264 index = find_free_bat(); 265 if (index == -1) { 266 pr_err("%s: no BAT available for mapping 0x%llx\n", __func__, 267 (unsigned long long)phys); 268 return; 269 } 270 bat = BATS[index]; 271 272 if ((flags & _PAGE_NO_CACHE) || 273 (cpu_has_feature(CPU_FTR_NEED_COHERENT) == 0)) 274 flags &= ~_PAGE_COHERENT; 275 276 bl = (size >> 17) - 1; 277 /* Do DBAT first */ 278 wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE 279 | _PAGE_COHERENT | _PAGE_GUARDED); 280 wimgxpp |= (flags & _PAGE_RW)? BPP_RW: BPP_RX; 281 bat[1].batu = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */ 282 bat[1].batl = BAT_PHYS_ADDR(phys) | wimgxpp; 283 if (flags & _PAGE_USER) 284 bat[1].batu |= 1; /* Vp = 1 */ 285 if (flags & _PAGE_GUARDED) { 286 /* G bit must be zero in IBATs */ 287 flags &= ~_PAGE_EXEC; 288 } 289 290 bat_addrs[index].start = virt; 291 bat_addrs[index].limit = virt + ((bl + 1) << 17) - 1; 292 bat_addrs[index].phys = phys; 293 } 294 295 /* 296 * Preload a translation in the hash table 297 */ 298 static void hash_preload(struct mm_struct *mm, unsigned long ea) 299 { 300 pmd_t *pmd; 301 302 if (!mmu_has_feature(MMU_FTR_HPTE_TABLE)) 303 return; 304 pmd = pmd_off(mm, ea); 305 if (!pmd_none(*pmd)) 306 add_hash_page(mm->context.id, ea, pmd_val(*pmd)); 307 } 308 309 /* 310 * This is called at the end of handling a user page fault, when the 311 * fault has been handled by updating a PTE in the linux page tables. 312 * We use it to preload an HPTE into the hash table corresponding to 313 * the updated linux PTE. 314 * 315 * This must always be called with the pte lock held. 316 */ 317 void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, 318 pte_t *ptep) 319 { 320 if (!mmu_has_feature(MMU_FTR_HPTE_TABLE)) 321 return; 322 /* 323 * We don't need to worry about _PAGE_PRESENT here because we are 324 * called with either mm->page_table_lock held or ptl lock held 325 */ 326 327 /* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */ 328 if (!pte_young(*ptep) || address >= TASK_SIZE) 329 return; 330 331 /* We have to test for regs NULL since init will get here first thing at boot */ 332 if (!current->thread.regs) 333 return; 334 335 /* We also avoid filling the hash if not coming from a fault */ 336 if (TRAP(current->thread.regs) != 0x300 && TRAP(current->thread.regs) != 0x400) 337 return; 338 339 hash_preload(vma->vm_mm, address); 340 } 341 342 /* 343 * Initialize the hash table and patch the instructions in hashtable.S. 344 */ 345 void __init MMU_init_hw(void) 346 { 347 unsigned int n_hpteg, lg_n_hpteg; 348 349 if (!mmu_has_feature(MMU_FTR_HPTE_TABLE)) 350 return; 351 352 if ( ppc_md.progress ) ppc_md.progress("hash:enter", 0x105); 353 354 #define LG_HPTEG_SIZE 6 /* 64 bytes per HPTEG */ 355 #define SDR1_LOW_BITS ((n_hpteg - 1) >> 10) 356 #define MIN_N_HPTEG 1024 /* min 64kB hash table */ 357 358 /* 359 * Allow 1 HPTE (1/8 HPTEG) for each page of memory. 360 * This is less than the recommended amount, but then 361 * Linux ain't AIX. 362 */ 363 n_hpteg = total_memory / (PAGE_SIZE * 8); 364 if (n_hpteg < MIN_N_HPTEG) 365 n_hpteg = MIN_N_HPTEG; 366 lg_n_hpteg = __ilog2(n_hpteg); 367 if (n_hpteg & (n_hpteg - 1)) { 368 ++lg_n_hpteg; /* round up if not power of 2 */ 369 n_hpteg = 1 << lg_n_hpteg; 370 } 371 Hash_size = n_hpteg << LG_HPTEG_SIZE; 372 373 /* 374 * Find some memory for the hash table. 375 */ 376 if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322); 377 Hash = memblock_alloc(Hash_size, Hash_size); 378 if (!Hash) 379 panic("%s: Failed to allocate %lu bytes align=0x%lx\n", 380 __func__, Hash_size, Hash_size); 381 _SDR1 = __pa(Hash) | SDR1_LOW_BITS; 382 383 pr_info("Total memory = %lldMB; using %ldkB for hash table\n", 384 (unsigned long long)(total_memory >> 20), Hash_size >> 10); 385 386 387 Hash_mask = n_hpteg - 1; 388 hash_mb2 = hash_mb = 32 - LG_HPTEG_SIZE - lg_n_hpteg; 389 if (lg_n_hpteg > 16) 390 hash_mb2 = 16 - LG_HPTEG_SIZE; 391 } 392 393 void __init MMU_init_hw_patch(void) 394 { 395 unsigned int hmask = Hash_mask >> (16 - LG_HPTEG_SIZE); 396 unsigned int hash = (unsigned int)Hash - PAGE_OFFSET; 397 398 if (!mmu_has_feature(MMU_FTR_HPTE_TABLE)) 399 return; 400 401 if (ppc_md.progress) 402 ppc_md.progress("hash:patch", 0x345); 403 if (ppc_md.progress) 404 ppc_md.progress("hash:done", 0x205); 405 406 /* WARNING: Make sure nothing can trigger a KASAN check past this point */ 407 408 /* 409 * Patch up the instructions in hashtable.S:create_hpte 410 */ 411 modify_instruction_site(&patch__hash_page_A0, 0xffff, hash >> 16); 412 modify_instruction_site(&patch__hash_page_A1, 0x7c0, hash_mb << 6); 413 modify_instruction_site(&patch__hash_page_A2, 0x7c0, hash_mb2 << 6); 414 modify_instruction_site(&patch__hash_page_B, 0xffff, hmask); 415 modify_instruction_site(&patch__hash_page_C, 0xffff, hmask); 416 417 /* 418 * Patch up the instructions in hashtable.S:flush_hash_page 419 */ 420 modify_instruction_site(&patch__flush_hash_A0, 0xffff, hash >> 16); 421 modify_instruction_site(&patch__flush_hash_A1, 0x7c0, hash_mb << 6); 422 modify_instruction_site(&patch__flush_hash_A2, 0x7c0, hash_mb2 << 6); 423 modify_instruction_site(&patch__flush_hash_B, 0xffff, hmask); 424 } 425 426 void setup_initial_memory_limit(phys_addr_t first_memblock_base, 427 phys_addr_t first_memblock_size) 428 { 429 /* We don't currently support the first MEMBLOCK not mapping 0 430 * physical on those processors 431 */ 432 BUG_ON(first_memblock_base != 0); 433 434 memblock_set_current_limit(min_t(u64, first_memblock_size, SZ_256M)); 435 } 436 437 void __init print_system_hash_info(void) 438 { 439 pr_info("Hash_size = 0x%lx\n", Hash_size); 440 if (Hash_mask) 441 pr_info("Hash_mask = 0x%lx\n", Hash_mask); 442 } 443 444 void __init early_init_mmu(void) 445 { 446 } 447