1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 * PowerPC version 4 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) 5 * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP 6 * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> 7 * Adapted for Power Macintosh by Paul Mackerras. 8 * Low-level exception handlers and MMU support 9 * rewritten by Paul Mackerras. 10 * Copyright (C) 1996 Paul Mackerras. 11 * 12 * This file contains low-level assembler routines for managing 13 * the PowerPC MMU hash table. (PPC 8xx processors don't use a 14 * hash table, so this file is not used on them.) 15 */ 16 17#include <linux/pgtable.h> 18#include <linux/init.h> 19#include <asm/reg.h> 20#include <asm/page.h> 21#include <asm/cputable.h> 22#include <asm/ppc_asm.h> 23#include <asm/thread_info.h> 24#include <asm/asm-offsets.h> 25#include <asm/export.h> 26#include <asm/feature-fixups.h> 27#include <asm/code-patching-asm.h> 28 29#ifdef CONFIG_PTE_64BIT 30#define PTE_T_SIZE 8 31#define PTE_FLAGS_OFFSET 4 /* offset of PTE flags, in bytes */ 32#else 33#define PTE_T_SIZE 4 34#define PTE_FLAGS_OFFSET 0 35#endif 36 37/* 38 * Load a PTE into the hash table, if possible. 39 * The address is in r4, and r3 contains an access flag: 40 * _PAGE_RW (0x400) if a write. 41 * r9 contains the SRR1 value, from which we use the MSR_PR bit. 42 * SPRG_THREAD contains the physical address of the current task's thread. 43 * 44 * Returns to the caller if the access is illegal or there is no 45 * mapping for the address. Otherwise it places an appropriate PTE 46 * in the hash table and returns from the exception. 47 * Uses r0, r3 - r6, r8, r10, ctr, lr. 48 */ 49 .text 50_GLOBAL(hash_page) 51#ifdef CONFIG_SMP 52 lis r8, (mmu_hash_lock - PAGE_OFFSET)@h 53 ori r8, r8, (mmu_hash_lock - PAGE_OFFSET)@l 54 lis r0,0x0fff 55 b 10f 5611: lwz r6,0(r8) 57 cmpwi 0,r6,0 58 bne 11b 5910: lwarx r6,0,r8 60 cmpwi 0,r6,0 61 bne- 11b 62 stwcx. r0,0,r8 63 bne- 10b 64 isync 65#endif 66 /* Get PTE (linux-style) and check access */ 67 lis r0, TASK_SIZE@h /* check if kernel address */ 68 cmplw 0,r4,r0 69 mfspr r8,SPRN_SPRG_THREAD /* current task's THREAD (phys) */ 70 ori r3,r3,_PAGE_USER|_PAGE_PRESENT /* test low addresses as user */ 71 lwz r5,PGDIR(r8) /* virt page-table root */ 72 blt+ 112f /* assume user more likely */ 73 lis r5,swapper_pg_dir@ha /* if kernel address, use */ 74 addi r5,r5,swapper_pg_dir@l /* kernel page table */ 75 rlwimi r3,r9,32-12,29,29 /* MSR_PR -> _PAGE_USER */ 76112: tophys(r5, r5) 77#ifndef CONFIG_PTE_64BIT 78 rlwimi r5,r4,12,20,29 /* insert top 10 bits of address */ 79 lwz r8,0(r5) /* get pmd entry */ 80 rlwinm. r8,r8,0,0,19 /* extract address of pte page */ 81#else 82 rlwinm r8,r4,13,19,29 /* Compute pgdir/pmd offset */ 83 lwzx r8,r8,r5 /* Get L1 entry */ 84 rlwinm. r8,r8,0,0,20 /* extract pt base address */ 85#endif 86#ifdef CONFIG_SMP 87 beq- .Lhash_page_out /* return if no mapping */ 88#else 89 /* XXX it seems like the 601 will give a machine fault on the 90 rfi if its alignment is wrong (bottom 4 bits of address are 91 8 or 0xc) and we have had a not-taken conditional branch 92 to the address following the rfi. */ 93 beqlr- 94#endif 95#ifndef CONFIG_PTE_64BIT 96 rlwimi r8,r4,22,20,29 /* insert next 10 bits of address */ 97#else 98 rlwimi r8,r4,23,20,28 /* compute pte address */ 99 /* 100 * If PTE_64BIT is set, the low word is the flags word; use that 101 * word for locking since it contains all the interesting bits. 102 */ 103 addi r8,r8,PTE_FLAGS_OFFSET 104#endif 105 106 /* 107 * Update the linux PTE atomically. We do the lwarx up-front 108 * because almost always, there won't be a permission violation 109 * and there won't already be an HPTE, and thus we will have 110 * to update the PTE to set _PAGE_HASHPTE. -- paulus. 111 */ 112.Lretry: 113 lwarx r6,0,r8 /* get linux-style pte, flag word */ 114#ifdef CONFIG_PPC_KUAP 115 mfsrin r5,r4 116 rlwinm r0,r9,28,_PAGE_RW /* MSR[PR] => _PAGE_RW */ 117 rlwinm r5,r5,12,_PAGE_RW /* Ks => _PAGE_RW */ 118 andc r5,r5,r0 /* Ks & ~MSR[PR] */ 119 andc r5,r6,r5 /* Clear _PAGE_RW when Ks = 1 && MSR[PR] = 0 */ 120 andc. r5,r3,r5 /* check access & ~permission */ 121#else 122 andc. r5,r3,r6 /* check access & ~permission */ 123#endif 124 rlwinm r0,r3,32-3,24,24 /* _PAGE_RW access -> _PAGE_DIRTY */ 125 ori r0,r0,_PAGE_ACCESSED|_PAGE_HASHPTE 126#ifdef CONFIG_SMP 127 bne- .Lhash_page_out /* return if access not permitted */ 128#else 129 bnelr- 130#endif 131 or r5,r0,r6 /* set accessed/dirty bits */ 132#ifdef CONFIG_PTE_64BIT 133#ifdef CONFIG_SMP 134 subf r10,r6,r8 /* create false data dependency */ 135 subi r10,r10,PTE_FLAGS_OFFSET 136 lwzx r10,r6,r10 /* Get upper PTE word */ 137#else 138 lwz r10,-PTE_FLAGS_OFFSET(r8) 139#endif /* CONFIG_SMP */ 140#endif /* CONFIG_PTE_64BIT */ 141 stwcx. r5,0,r8 /* attempt to update PTE */ 142 bne- .Lretry /* retry if someone got there first */ 143 144 mfsrin r3,r4 /* get segment reg for segment */ 145 bl create_hpte /* add the hash table entry */ 146 147#ifdef CONFIG_SMP 148 eieio 149 lis r8, (mmu_hash_lock - PAGE_OFFSET)@ha 150 li r0,0 151 stw r0, (mmu_hash_lock - PAGE_OFFSET)@l(r8) 152#endif 153 b fast_hash_page_return 154 155#ifdef CONFIG_SMP 156.Lhash_page_out: 157 eieio 158 lis r8, (mmu_hash_lock - PAGE_OFFSET)@ha 159 li r0,0 160 stw r0, (mmu_hash_lock - PAGE_OFFSET)@l(r8) 161 blr 162#endif /* CONFIG_SMP */ 163_ASM_NOKPROBE_SYMBOL(hash_page) 164 165/* 166 * Add an entry for a particular page to the hash table. 167 * 168 * add_hash_page(unsigned context, unsigned long va, unsigned long pmdval) 169 * 170 * We assume any necessary modifications to the pte (e.g. setting 171 * the accessed bit) have already been done and that there is actually 172 * a hash table in use (i.e. we're not on a 603). 173 */ 174_GLOBAL(add_hash_page) 175 mflr r0 176 stw r0,4(r1) 177 178#ifdef CONFIG_SMP 179 lwz r8,TASK_CPU(r2) /* to go in mmu_hash_lock */ 180 oris r8,r8,12 181#endif /* CONFIG_SMP */ 182 183 /* 184 * We disable interrupts here, even on UP, because we don't 185 * want to race with hash_page, and because we want the 186 * _PAGE_HASHPTE bit to be a reliable indication of whether 187 * the HPTE exists (or at least whether one did once). 188 * We also turn off the MMU for data accesses so that we 189 * we can't take a hash table miss (assuming the code is 190 * covered by a BAT). -- paulus 191 */ 192 mfmsr r9 193 rlwinm r0,r9,0,17,15 /* clear bit 16 (MSR_EE) */ 194 rlwinm r0,r0,0,28,26 /* clear MSR_DR */ 195 mtmsr r0 196 isync 197 198#ifdef CONFIG_SMP 199 lis r6, (mmu_hash_lock - PAGE_OFFSET)@ha 200 addi r6, r6, (mmu_hash_lock - PAGE_OFFSET)@l 20110: lwarx r0,0,r6 /* take the mmu_hash_lock */ 202 cmpi 0,r0,0 203 bne- 11f 204 stwcx. r8,0,r6 205 beq+ 12f 20611: lwz r0,0(r6) 207 cmpi 0,r0,0 208 beq 10b 209 b 11b 21012: isync 211#endif 212 213 /* 214 * Fetch the linux pte and test and set _PAGE_HASHPTE atomically. 215 * If _PAGE_HASHPTE was already set, we don't replace the existing 216 * HPTE, so we just unlock and return. 217 */ 218 mr r8,r5 219#ifndef CONFIG_PTE_64BIT 220 rlwimi r8,r4,22,20,29 221#else 222 rlwimi r8,r4,23,20,28 223 addi r8,r8,PTE_FLAGS_OFFSET 224#endif 2251: lwarx r6,0,r8 226 andi. r0,r6,_PAGE_HASHPTE 227 bne 9f /* if HASHPTE already set, done */ 228#ifdef CONFIG_PTE_64BIT 229#ifdef CONFIG_SMP 230 subf r10,r6,r8 /* create false data dependency */ 231 subi r10,r10,PTE_FLAGS_OFFSET 232 lwzx r10,r6,r10 /* Get upper PTE word */ 233#else 234 lwz r10,-PTE_FLAGS_OFFSET(r8) 235#endif /* CONFIG_SMP */ 236#endif /* CONFIG_PTE_64BIT */ 237 ori r5,r6,_PAGE_HASHPTE 238 stwcx. r5,0,r8 239 bne- 1b 240 241 /* Convert context and va to VSID */ 242 mulli r3,r3,897*16 /* multiply context by context skew */ 243 rlwinm r0,r4,4,28,31 /* get ESID (top 4 bits of va) */ 244 mulli r0,r0,0x111 /* multiply by ESID skew */ 245 add r3,r3,r0 /* note create_hpte trims to 24 bits */ 246 247 bl create_hpte 248 2499: 250#ifdef CONFIG_SMP 251 lis r6, (mmu_hash_lock - PAGE_OFFSET)@ha 252 addi r6, r6, (mmu_hash_lock - PAGE_OFFSET)@l 253 eieio 254 li r0,0 255 stw r0,0(r6) /* clear mmu_hash_lock */ 256#endif 257 258 /* reenable interrupts and DR */ 259 mtmsr r9 260 isync 261 262 lwz r0,4(r1) 263 mtlr r0 264 blr 265_ASM_NOKPROBE_SYMBOL(add_hash_page) 266 267/* 268 * This routine adds a hardware PTE to the hash table. 269 * It is designed to be called with the MMU either on or off. 270 * r3 contains the VSID, r4 contains the virtual address, 271 * r5 contains the linux PTE, r6 contains the old value of the 272 * linux PTE (before setting _PAGE_HASHPTE). r10 contains the 273 * upper half of the PTE if CONFIG_PTE_64BIT. 274 * On SMP, the caller should have the mmu_hash_lock held. 275 * We assume that the caller has (or will) set the _PAGE_HASHPTE 276 * bit in the linux PTE in memory. The value passed in r6 should 277 * be the old linux PTE value; if it doesn't have _PAGE_HASHPTE set 278 * this routine will skip the search for an existing HPTE. 279 * This procedure modifies r0, r3 - r6, r8, cr0. 280 * -- paulus. 281 * 282 * For speed, 4 of the instructions get patched once the size and 283 * physical address of the hash table are known. These definitions 284 * of Hash_base and Hash_bits below are for the early hash table. 285 */ 286Hash_base = early_hash 287Hash_bits = 12 /* e.g. 256kB hash table */ 288Hash_msk = (((1 << Hash_bits) - 1) * 64) 289 290/* defines for the PTE format for 32-bit PPCs */ 291#define HPTE_SIZE 8 292#define PTEG_SIZE 64 293#define LG_PTEG_SIZE 6 294#define LDPTEu lwzu 295#define LDPTE lwz 296#define STPTE stw 297#define CMPPTE cmpw 298#define PTE_H 0x40 299#define PTE_V 0x80000000 300#define TST_V(r) rlwinm. r,r,0,0,0 301#define SET_V(r) oris r,r,PTE_V@h 302#define CLR_V(r,t) rlwinm r,r,0,1,31 303 304#define HASH_LEFT 31-(LG_PTEG_SIZE+Hash_bits-1) 305#define HASH_RIGHT 31-LG_PTEG_SIZE 306 307__REF 308_GLOBAL(create_hpte) 309 /* Convert linux-style PTE (r5) to low word of PPC-style PTE (r8) */ 310 rlwinm r8,r5,32-9,30,30 /* _PAGE_RW -> PP msb */ 311 rlwinm r0,r5,32-6,30,30 /* _PAGE_DIRTY -> PP msb */ 312 and r8,r8,r0 /* writable if _RW & _DIRTY */ 313 rlwimi r5,r5,32-1,30,30 /* _PAGE_USER -> PP msb */ 314 rlwimi r5,r5,32-2,31,31 /* _PAGE_USER -> PP lsb */ 315 ori r8,r8,0xe04 /* clear out reserved bits */ 316 andc r8,r5,r8 /* PP = user? (rw&dirty? 1: 3): 0 */ 317BEGIN_FTR_SECTION 318 rlwinm r8,r8,0,~_PAGE_COHERENT /* clear M (coherence not required) */ 319END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT) 320#ifdef CONFIG_PTE_64BIT 321 /* Put the XPN bits into the PTE */ 322 rlwimi r8,r10,8,20,22 323 rlwimi r8,r10,2,29,29 324#endif 325 326 /* Construct the high word of the PPC-style PTE (r5) */ 327 rlwinm r5,r3,7,1,24 /* put VSID in 0x7fffff80 bits */ 328 rlwimi r5,r4,10,26,31 /* put in API (abbrev page index) */ 329 SET_V(r5) /* set V (valid) bit */ 330 331 patch_site 0f, patch__hash_page_A0 332 patch_site 1f, patch__hash_page_A1 333 patch_site 2f, patch__hash_page_A2 334 /* Get the address of the primary PTE group in the hash table (r3) */ 3350: lis r0, (Hash_base - PAGE_OFFSET)@h /* base address of hash table */ 3361: rlwimi r0,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* VSID -> hash */ 3372: rlwinm r3,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */ 338 xor r3,r3,r0 /* make primary hash */ 339 li r0,8 /* PTEs/group */ 340 341 /* 342 * Test the _PAGE_HASHPTE bit in the old linux PTE, and skip the search 343 * if it is clear, meaning that the HPTE isn't there already... 344 */ 345 andi. r6,r6,_PAGE_HASHPTE 346 beq+ 10f /* no PTE: go look for an empty slot */ 347 tlbie r4 348 349 /* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */ 350 mtctr r0 351 addi r4,r3,-HPTE_SIZE 3521: LDPTEu r6,HPTE_SIZE(r4) /* get next PTE */ 353 CMPPTE 0,r6,r5 354 bdnzf 2,1b /* loop while ctr != 0 && !cr0.eq */ 355 beq+ .Lfound_slot 356 357 patch_site 0f, patch__hash_page_B 358 /* Search the secondary PTEG for a matching PTE */ 359 ori r5,r5,PTE_H /* set H (secondary hash) bit */ 3600: xoris r4,r3,Hash_msk>>16 /* compute secondary hash */ 361 xori r4,r4,(-PTEG_SIZE & 0xffff) 362 addi r4,r4,-HPTE_SIZE 363 mtctr r0 3642: LDPTEu r6,HPTE_SIZE(r4) 365 CMPPTE 0,r6,r5 366 bdnzf 2,2b 367 beq+ .Lfound_slot 368 xori r5,r5,PTE_H /* clear H bit again */ 369 370 /* Search the primary PTEG for an empty slot */ 37110: mtctr r0 372 addi r4,r3,-HPTE_SIZE /* search primary PTEG */ 3731: LDPTEu r6,HPTE_SIZE(r4) /* get next PTE */ 374 TST_V(r6) /* test valid bit */ 375 bdnzf 2,1b /* loop while ctr != 0 && !cr0.eq */ 376 beq+ .Lfound_empty 377 378 patch_site 0f, patch__hash_page_C 379 /* Search the secondary PTEG for an empty slot */ 380 ori r5,r5,PTE_H /* set H (secondary hash) bit */ 3810: xoris r4,r3,Hash_msk>>16 /* compute secondary hash */ 382 xori r4,r4,(-PTEG_SIZE & 0xffff) 383 addi r4,r4,-HPTE_SIZE 384 mtctr r0 3852: LDPTEu r6,HPTE_SIZE(r4) 386 TST_V(r6) 387 bdnzf 2,2b 388 beq+ .Lfound_empty 389 xori r5,r5,PTE_H /* clear H bit again */ 390 391 /* 392 * Choose an arbitrary slot in the primary PTEG to overwrite. 393 * Since both the primary and secondary PTEGs are full, and we 394 * have no information that the PTEs in the primary PTEG are 395 * more important or useful than those in the secondary PTEG, 396 * and we know there is a definite (although small) speed 397 * advantage to putting the PTE in the primary PTEG, we always 398 * put the PTE in the primary PTEG. 399 */ 400 401 lis r4, (next_slot - PAGE_OFFSET)@ha /* get next evict slot */ 402 lwz r6, (next_slot - PAGE_OFFSET)@l(r4) 403 addi r6,r6,HPTE_SIZE /* search for candidate */ 404 andi. r6,r6,7*HPTE_SIZE 405 stw r6,next_slot@l(r4) 406 add r4,r3,r6 407 408#ifndef CONFIG_SMP 409 /* Store PTE in PTEG */ 410.Lfound_empty: 411 STPTE r5,0(r4) 412.Lfound_slot: 413 STPTE r8,HPTE_SIZE/2(r4) 414 415#else /* CONFIG_SMP */ 416/* 417 * Between the tlbie above and updating the hash table entry below, 418 * another CPU could read the hash table entry and put it in its TLB. 419 * There are 3 cases: 420 * 1. using an empty slot 421 * 2. updating an earlier entry to change permissions (i.e. enable write) 422 * 3. taking over the PTE for an unrelated address 423 * 424 * In each case it doesn't really matter if the other CPUs have the old 425 * PTE in their TLB. So we don't need to bother with another tlbie here, 426 * which is convenient as we've overwritten the register that had the 427 * address. :-) The tlbie above is mainly to make sure that this CPU comes 428 * and gets the new PTE from the hash table. 429 * 430 * We do however have to make sure that the PTE is never in an invalid 431 * state with the V bit set. 432 */ 433.Lfound_empty: 434.Lfound_slot: 435 CLR_V(r5,r0) /* clear V (valid) bit in PTE */ 436 STPTE r5,0(r4) 437 sync 438 TLBSYNC 439 STPTE r8,HPTE_SIZE/2(r4) /* put in correct RPN, WIMG, PP bits */ 440 sync 441 SET_V(r5) 442 STPTE r5,0(r4) /* finally set V bit in PTE */ 443#endif /* CONFIG_SMP */ 444 445 sync /* make sure pte updates get to memory */ 446 blr 447 .previous 448_ASM_NOKPROBE_SYMBOL(create_hpte) 449 450 .section .bss 451 .align 2 452next_slot: 453 .space 4 454 .previous 455 456/* 457 * Flush the entry for a particular page from the hash table. 458 * 459 * flush_hash_pages(unsigned context, unsigned long va, unsigned long pmdval, 460 * int count) 461 * 462 * We assume that there is a hash table in use (Hash != 0). 463 */ 464__REF 465_GLOBAL(flush_hash_pages) 466 /* 467 * We disable interrupts here, even on UP, because we want 468 * the _PAGE_HASHPTE bit to be a reliable indication of 469 * whether the HPTE exists (or at least whether one did once). 470 * We also turn off the MMU for data accesses so that we 471 * we can't take a hash table miss (assuming the code is 472 * covered by a BAT). -- paulus 473 */ 474 mfmsr r10 475 rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */ 476 rlwinm r0,r0,0,28,26 /* clear MSR_DR */ 477 mtmsr r0 478 isync 479 480 /* First find a PTE in the range that has _PAGE_HASHPTE set */ 481#ifndef CONFIG_PTE_64BIT 482 rlwimi r5,r4,22,20,29 483#else 484 rlwimi r5,r4,23,20,28 485 addi r5,r5,PTE_FLAGS_OFFSET 486#endif 4871: lwz r0,0(r5) 488 cmpwi cr1,r6,1 489 andi. r0,r0,_PAGE_HASHPTE 490 bne 2f 491 ble cr1,19f 492 addi r4,r4,0x1000 493 addi r5,r5,PTE_T_SIZE 494 addi r6,r6,-1 495 b 1b 496 497 /* Convert context and va to VSID */ 4982: mulli r3,r3,897*16 /* multiply context by context skew */ 499 rlwinm r0,r4,4,28,31 /* get ESID (top 4 bits of va) */ 500 mulli r0,r0,0x111 /* multiply by ESID skew */ 501 add r3,r3,r0 /* note code below trims to 24 bits */ 502 503 /* Construct the high word of the PPC-style PTE (r11) */ 504 rlwinm r11,r3,7,1,24 /* put VSID in 0x7fffff80 bits */ 505 rlwimi r11,r4,10,26,31 /* put in API (abbrev page index) */ 506 SET_V(r11) /* set V (valid) bit */ 507 508#ifdef CONFIG_SMP 509 lis r9, (mmu_hash_lock - PAGE_OFFSET)@ha 510 addi r9, r9, (mmu_hash_lock - PAGE_OFFSET)@l 511 tophys (r8, r2) 512 lwz r8, TASK_CPU(r8) 513 oris r8,r8,9 51410: lwarx r0,0,r9 515 cmpi 0,r0,0 516 bne- 11f 517 stwcx. r8,0,r9 518 beq+ 12f 51911: lwz r0,0(r9) 520 cmpi 0,r0,0 521 beq 10b 522 b 11b 52312: isync 524#endif 525 526 /* 527 * Check the _PAGE_HASHPTE bit in the linux PTE. If it is 528 * already clear, we're done (for this pte). If not, 529 * clear it (atomically) and proceed. -- paulus. 530 */ 53133: lwarx r8,0,r5 /* fetch the pte flags word */ 532 andi. r0,r8,_PAGE_HASHPTE 533 beq 8f /* done if HASHPTE is already clear */ 534 rlwinm r8,r8,0,31,29 /* clear HASHPTE bit */ 535 stwcx. r8,0,r5 /* update the pte */ 536 bne- 33b 537 538 patch_site 0f, patch__flush_hash_A0 539 patch_site 1f, patch__flush_hash_A1 540 patch_site 2f, patch__flush_hash_A2 541 /* Get the address of the primary PTE group in the hash table (r3) */ 5420: lis r8, (Hash_base - PAGE_OFFSET)@h /* base address of hash table */ 5431: rlwimi r8,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* VSID -> hash */ 5442: rlwinm r0,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */ 545 xor r8,r0,r8 /* make primary hash */ 546 547 /* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */ 548 li r0,8 /* PTEs/group */ 549 mtctr r0 550 addi r12,r8,-HPTE_SIZE 5511: LDPTEu r0,HPTE_SIZE(r12) /* get next PTE */ 552 CMPPTE 0,r0,r11 553 bdnzf 2,1b /* loop while ctr != 0 && !cr0.eq */ 554 beq+ 3f 555 556 patch_site 0f, patch__flush_hash_B 557 /* Search the secondary PTEG for a matching PTE */ 558 ori r11,r11,PTE_H /* set H (secondary hash) bit */ 559 li r0,8 /* PTEs/group */ 5600: xoris r12,r8,Hash_msk>>16 /* compute secondary hash */ 561 xori r12,r12,(-PTEG_SIZE & 0xffff) 562 addi r12,r12,-HPTE_SIZE 563 mtctr r0 5642: LDPTEu r0,HPTE_SIZE(r12) 565 CMPPTE 0,r0,r11 566 bdnzf 2,2b 567 xori r11,r11,PTE_H /* clear H again */ 568 bne- 4f /* should rarely fail to find it */ 569 5703: li r0,0 571 STPTE r0,0(r12) /* invalidate entry */ 5724: sync 573 tlbie r4 /* in hw tlb too */ 574 sync 575 5768: ble cr1,9f /* if all ptes checked */ 57781: addi r6,r6,-1 578 addi r5,r5,PTE_T_SIZE 579 addi r4,r4,0x1000 580 lwz r0,0(r5) /* check next pte */ 581 cmpwi cr1,r6,1 582 andi. r0,r0,_PAGE_HASHPTE 583 bne 33b 584 bgt cr1,81b 585 5869: 587#ifdef CONFIG_SMP 588 TLBSYNC 589 li r0,0 590 stw r0,0(r9) /* clear mmu_hash_lock */ 591#endif 592 59319: mtmsr r10 594 isync 595 blr 596 .previous 597EXPORT_SYMBOL(flush_hash_pages) 598_ASM_NOKPROBE_SYMBOL(flush_hash_pages) 599