1/* 2 * This program is free software; you can redistribute it and/or modify 3 * it under the terms of the GNU General Public License, version 2, as 4 * published by the Free Software Foundation. 5 * 6 * This program is distributed in the hope that it will be useful, 7 * but WITHOUT ANY WARRANTY; without even the implied warranty of 8 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 9 * GNU General Public License for more details. 10 * 11 * You should have received a copy of the GNU General Public License 12 * along with this program; if not, write to the Free Software 13 * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. 14 * 15 * Copyright SUSE Linux Products GmbH 2010 16 * 17 * Authors: Alexander Graf <agraf@suse.de> 18 */ 19 20/* Real mode helpers */ 21 22#if defined(CONFIG_PPC_BOOK3S_64) 23 24#define GET_SHADOW_VCPU(reg) \ 25 mr reg, r13 26 27#elif defined(CONFIG_PPC_BOOK3S_32) 28 29#define GET_SHADOW_VCPU(reg) \ 30 tophys(reg, r2); \ 31 lwz reg, (THREAD + THREAD_KVM_SVCPU)(reg); \ 32 tophys(reg, reg) 33 34#endif 35 36/* Disable for nested KVM */ 37#define USE_QUICK_LAST_INST 38 39 40/* Get helper functions for subarch specific functionality */ 41 42#if defined(CONFIG_PPC_BOOK3S_64) 43#include "book3s_64_slb.S" 44#elif defined(CONFIG_PPC_BOOK3S_32) 45#include "book3s_32_sr.S" 46#endif 47 48/****************************************************************************** 49 * * 50 * Entry code * 51 * * 52 *****************************************************************************/ 53 54.global kvmppc_handler_trampoline_enter 55kvmppc_handler_trampoline_enter: 56 57 /* Required state: 58 * 59 * MSR = ~IR|DR 60 * R1 = host R1 61 * R2 = host R2 62 * R4 = guest shadow MSR 63 * R5 = normal host MSR 64 * R6 = current host MSR (EE, IR, DR off) 65 * LR = highmem guest exit code 66 * all other volatile GPRS = free 67 * SVCPU[CR] = guest CR 68 * SVCPU[XER] = guest XER 69 * SVCPU[CTR] = guest CTR 70 * SVCPU[LR] = guest LR 71 */ 72 73 /* r3 = shadow vcpu */ 74 GET_SHADOW_VCPU(r3) 75 76 /* Save guest exit handler address and MSR */ 77 mflr r0 78 PPC_STL r0, HSTATE_VMHANDLER(r3) 79 PPC_STL r5, HSTATE_HOST_MSR(r3) 80 81 /* Save R1/R2 in the PACA (64-bit) or shadow_vcpu (32-bit) */ 82 PPC_STL r1, HSTATE_HOST_R1(r3) 83 PPC_STL r2, HSTATE_HOST_R2(r3) 84 85 /* Activate guest mode, so faults get handled by KVM */ 86 li r11, KVM_GUEST_MODE_GUEST 87 stb r11, HSTATE_IN_GUEST(r3) 88 89 /* Switch to guest segment. This is subarch specific. */ 90 LOAD_GUEST_SEGMENTS 91 92#ifdef CONFIG_PPC_BOOK3S_64 93BEGIN_FTR_SECTION 94 /* Save host FSCR */ 95 mfspr r8, SPRN_FSCR 96 std r8, HSTATE_HOST_FSCR(r13) 97 /* Set FSCR during guest execution */ 98 ld r9, SVCPU_SHADOW_FSCR(r13) 99 mtspr SPRN_FSCR, r9 100END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) 101 102 /* Some guests may need to have dcbz set to 32 byte length. 103 * 104 * Usually we ensure that by patching the guest's instructions 105 * to trap on dcbz and emulate it in the hypervisor. 106 * 107 * If we can, we should tell the CPU to use 32 byte dcbz though, 108 * because that's a lot faster. 109 */ 110 lbz r0, HSTATE_RESTORE_HID5(r3) 111 cmpwi r0, 0 112 beq no_dcbz32_on 113 114 mfspr r0,SPRN_HID5 115 ori r0, r0, 0x80 /* XXX HID5_dcbz32 = 0x80 */ 116 mtspr SPRN_HID5,r0 117no_dcbz32_on: 118 119#endif /* CONFIG_PPC_BOOK3S_64 */ 120 121 /* Enter guest */ 122 123 PPC_LL r8, SVCPU_CTR(r3) 124 PPC_LL r9, SVCPU_LR(r3) 125 lwz r10, SVCPU_CR(r3) 126 lwz r11, SVCPU_XER(r3) 127 128 mtctr r8 129 mtlr r9 130 mtcr r10 131 mtxer r11 132 133 /* Move SRR0 and SRR1 into the respective regs */ 134 PPC_LL r9, SVCPU_PC(r3) 135 /* First clear RI in our current MSR value */ 136 li r0, MSR_RI 137 andc r6, r6, r0 138 139 PPC_LL r0, SVCPU_R0(r3) 140 PPC_LL r1, SVCPU_R1(r3) 141 PPC_LL r2, SVCPU_R2(r3) 142 PPC_LL r5, SVCPU_R5(r3) 143 PPC_LL r7, SVCPU_R7(r3) 144 PPC_LL r8, SVCPU_R8(r3) 145 PPC_LL r10, SVCPU_R10(r3) 146 PPC_LL r11, SVCPU_R11(r3) 147 PPC_LL r12, SVCPU_R12(r3) 148 PPC_LL r13, SVCPU_R13(r3) 149 150 MTMSR_EERI(r6) 151 mtsrr0 r9 152 mtsrr1 r4 153 154 PPC_LL r4, SVCPU_R4(r3) 155 PPC_LL r6, SVCPU_R6(r3) 156 PPC_LL r9, SVCPU_R9(r3) 157 PPC_LL r3, (SVCPU_R3)(r3) 158 159 RFI 160kvmppc_handler_trampoline_enter_end: 161 162 163 164/****************************************************************************** 165 * * 166 * Exit code * 167 * * 168 *****************************************************************************/ 169 170.global kvmppc_handler_trampoline_exit 171kvmppc_handler_trampoline_exit: 172 173.global kvmppc_interrupt_pr 174kvmppc_interrupt_pr: 175 176 /* Register usage at this point: 177 * 178 * SPRG_SCRATCH0 = guest R13 179 * R12 = exit handler id 180 * R13 = shadow vcpu (32-bit) or PACA (64-bit) 181 * HSTATE.SCRATCH0 = guest R12 182 * HSTATE.SCRATCH1 = guest CR 183 * 184 */ 185 186 /* Save registers */ 187 188 PPC_STL r0, SVCPU_R0(r13) 189 PPC_STL r1, SVCPU_R1(r13) 190 PPC_STL r2, SVCPU_R2(r13) 191 PPC_STL r3, SVCPU_R3(r13) 192 PPC_STL r4, SVCPU_R4(r13) 193 PPC_STL r5, SVCPU_R5(r13) 194 PPC_STL r6, SVCPU_R6(r13) 195 PPC_STL r7, SVCPU_R7(r13) 196 PPC_STL r8, SVCPU_R8(r13) 197 PPC_STL r9, SVCPU_R9(r13) 198 PPC_STL r10, SVCPU_R10(r13) 199 PPC_STL r11, SVCPU_R11(r13) 200 201 /* Restore R1/R2 so we can handle faults */ 202 PPC_LL r1, HSTATE_HOST_R1(r13) 203 PPC_LL r2, HSTATE_HOST_R2(r13) 204 205 /* Save guest PC and MSR */ 206#ifdef CONFIG_PPC64 207BEGIN_FTR_SECTION 208 andi. r0, r12, 0x2 209 cmpwi cr1, r0, 0 210 beq 1f 211 mfspr r3,SPRN_HSRR0 212 mfspr r4,SPRN_HSRR1 213 andi. r12,r12,0x3ffd 214 b 2f 215END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) 216#endif 2171: mfsrr0 r3 218 mfsrr1 r4 2192: 220 PPC_STL r3, SVCPU_PC(r13) 221 PPC_STL r4, SVCPU_SHADOW_SRR1(r13) 222 223 /* Get scratch'ed off registers */ 224 GET_SCRATCH0(r9) 225 PPC_LL r8, HSTATE_SCRATCH0(r13) 226 lwz r7, HSTATE_SCRATCH1(r13) 227 228 PPC_STL r9, SVCPU_R13(r13) 229 PPC_STL r8, SVCPU_R12(r13) 230 stw r7, SVCPU_CR(r13) 231 232 /* Save more register state */ 233 234 mfxer r5 235 mfdar r6 236 mfdsisr r7 237 mfctr r8 238 mflr r9 239 240 stw r5, SVCPU_XER(r13) 241 PPC_STL r6, SVCPU_FAULT_DAR(r13) 242 stw r7, SVCPU_FAULT_DSISR(r13) 243 PPC_STL r8, SVCPU_CTR(r13) 244 PPC_STL r9, SVCPU_LR(r13) 245 246 /* 247 * In order for us to easily get the last instruction, 248 * we got the #vmexit at, we exploit the fact that the 249 * virtual layout is still the same here, so we can just 250 * ld from the guest's PC address 251 */ 252 253 /* We only load the last instruction when it's safe */ 254 cmpwi r12, BOOK3S_INTERRUPT_DATA_STORAGE 255 beq ld_last_inst 256 cmpwi r12, BOOK3S_INTERRUPT_PROGRAM 257 beq ld_last_inst 258 cmpwi r12, BOOK3S_INTERRUPT_SYSCALL 259 beq ld_last_prev_inst 260 cmpwi r12, BOOK3S_INTERRUPT_ALIGNMENT 261 beq- ld_last_inst 262#ifdef CONFIG_PPC64 263BEGIN_FTR_SECTION 264 cmpwi r12, BOOK3S_INTERRUPT_H_EMUL_ASSIST 265 beq- ld_last_inst 266END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) 267BEGIN_FTR_SECTION 268 cmpwi r12, BOOK3S_INTERRUPT_FAC_UNAVAIL 269 beq- ld_last_inst 270END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) 271#endif 272 273 b no_ld_last_inst 274 275ld_last_prev_inst: 276 addi r3, r3, -4 277 278ld_last_inst: 279 /* Save off the guest instruction we're at */ 280 281 /* In case lwz faults */ 282 li r0, KVM_INST_FETCH_FAILED 283 284#ifdef USE_QUICK_LAST_INST 285 286 /* Set guest mode to 'jump over instruction' so if lwz faults 287 * we'll just continue at the next IP. */ 288 li r9, KVM_GUEST_MODE_SKIP 289 stb r9, HSTATE_IN_GUEST(r13) 290 291 /* 1) enable paging for data */ 292 mfmsr r9 293 ori r11, r9, MSR_DR /* Enable paging for data */ 294 mtmsr r11 295 sync 296 /* 2) fetch the instruction */ 297 lwz r0, 0(r3) 298 /* 3) disable paging again */ 299 mtmsr r9 300 sync 301 302#endif 303 stw r0, SVCPU_LAST_INST(r13) 304 305no_ld_last_inst: 306 307 /* Unset guest mode */ 308 li r9, KVM_GUEST_MODE_NONE 309 stb r9, HSTATE_IN_GUEST(r13) 310 311 /* Switch back to host MMU */ 312 LOAD_HOST_SEGMENTS 313 314#ifdef CONFIG_PPC_BOOK3S_64 315 316 lbz r5, HSTATE_RESTORE_HID5(r13) 317 cmpwi r5, 0 318 beq no_dcbz32_off 319 320 li r4, 0 321 mfspr r5,SPRN_HID5 322 rldimi r5,r4,6,56 323 mtspr SPRN_HID5,r5 324 325no_dcbz32_off: 326 327BEGIN_FTR_SECTION 328 /* Save guest FSCR on a FAC_UNAVAIL interrupt */ 329 cmpwi r12, BOOK3S_INTERRUPT_FAC_UNAVAIL 330 bne+ no_fscr_save 331 mfspr r7, SPRN_FSCR 332 std r7, SVCPU_SHADOW_FSCR(r13) 333no_fscr_save: 334 /* Restore host FSCR */ 335 ld r8, HSTATE_HOST_FSCR(r13) 336 mtspr SPRN_FSCR, r8 337END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) 338 339#endif /* CONFIG_PPC_BOOK3S_64 */ 340 341 /* 342 * For some interrupts, we need to call the real Linux 343 * handler, so it can do work for us. This has to happen 344 * as if the interrupt arrived from the kernel though, 345 * so let's fake it here where most state is restored. 346 * 347 * Having set up SRR0/1 with the address where we want 348 * to continue with relocation on (potentially in module 349 * space), we either just go straight there with rfi[d], 350 * or we jump to an interrupt handler if there is an 351 * interrupt to be handled first. In the latter case, 352 * the rfi[d] at the end of the interrupt handler will 353 * get us back to where we want to continue. 354 */ 355 356 /* Register usage at this point: 357 * 358 * R1 = host R1 359 * R2 = host R2 360 * R10 = raw exit handler id 361 * R12 = exit handler id 362 * R13 = shadow vcpu (32-bit) or PACA (64-bit) 363 * SVCPU.* = guest * 364 * 365 */ 366 367 PPC_LL r6, HSTATE_HOST_MSR(r13) 368 PPC_LL r8, HSTATE_VMHANDLER(r13) 369 370#ifdef CONFIG_PPC64 371BEGIN_FTR_SECTION 372 beq cr1, 1f 373 mtspr SPRN_HSRR1, r6 374 mtspr SPRN_HSRR0, r8 375END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) 376#endif 3771: /* Restore host msr -> SRR1 */ 378 mtsrr1 r6 379 /* Load highmem handler address */ 380 mtsrr0 r8 381 382 /* RFI into the highmem handler, or jump to interrupt handler */ 383 cmpwi r12, BOOK3S_INTERRUPT_EXTERNAL 384 beqa BOOK3S_INTERRUPT_EXTERNAL 385 cmpwi r12, BOOK3S_INTERRUPT_DECREMENTER 386 beqa BOOK3S_INTERRUPT_DECREMENTER 387 cmpwi r12, BOOK3S_INTERRUPT_PERFMON 388 beqa BOOK3S_INTERRUPT_PERFMON 389 cmpwi r12, BOOK3S_INTERRUPT_DOORBELL 390 beqa BOOK3S_INTERRUPT_DOORBELL 391 392 RFI 393kvmppc_handler_trampoline_exit_end: 394