1/* SPDX-License-Identifier: GPL-2.0 */
2#ifdef CONFIG_PPC64
3#define PROVIDE32(x)	PROVIDE(__unused__##x)
4#else
5#define PROVIDE32(x)	PROVIDE(x)
6#endif
7
8#define BSS_FIRST_SECTIONS *(.bss.prominit)
9
10#include <asm/page.h>
11#include <asm-generic/vmlinux.lds.h>
12#include <asm/cache.h>
13#include <asm/thread_info.h>
14
15#if defined(CONFIG_STRICT_KERNEL_RWX) && !defined(CONFIG_PPC32)
16#define STRICT_ALIGN_SIZE	(1 << 24)
17#else
18#define STRICT_ALIGN_SIZE	PAGE_SIZE
19#endif
20
21ENTRY(_stext)
22
23PHDRS {
24	kernel PT_LOAD FLAGS(7); /* RWX */
25	notes PT_NOTE FLAGS(0);
26	dummy PT_NOTE FLAGS(0);
27
28	/* binutils < 2.18 has a bug that makes it misbehave when taking an
29	   ELF file with all segments at load address 0 as input.  This
30	   happens when running "strip" on vmlinux, because of the AT() magic
31	   in this linker script.  People using GCC >= 4.2 won't run into
32	   this problem, because the "build-id" support will put some data
33	   into the "notes" segment (at a non-zero load address).
34
35	   To work around this, we force some data into both the "dummy"
36	   segment and the kernel segment, so the dummy segment will get a
37	   non-zero load address.  It's not enough to always create the
38	   "notes" segment, since if nothing gets assigned to it, its load
39	   address will be zero.  */
40}
41
42#ifdef CONFIG_PPC64
43OUTPUT_ARCH(powerpc:common64)
44jiffies = jiffies_64;
45#else
46OUTPUT_ARCH(powerpc:common)
47jiffies = jiffies_64 + 4;
48#endif
49SECTIONS
50{
51	. = KERNELBASE;
52
53/*
54 * Text, read only data and other permanent read-only sections
55 */
56
57	_text = .;
58	_stext = .;
59
60	/*
61	 * Head text.
62	 * This needs to be in its own output section to avoid ld placing
63	 * branch trampoline stubs randomly throughout the fixed sections,
64	 * which it will do (even if the branch comes from another section)
65	 * in order to optimize stub generation.
66	 */
67	.head.text : AT(ADDR(.head.text) - LOAD_OFFSET) {
68#ifdef CONFIG_PPC64
69		KEEP(*(.head.text.first_256B));
70#ifdef CONFIG_PPC_BOOK3E
71#else
72		KEEP(*(.head.text.real_vectors));
73		*(.head.text.real_trampolines);
74		KEEP(*(.head.text.virt_vectors));
75		*(.head.text.virt_trampolines);
76# if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
77		KEEP(*(.head.data.fwnmi_page));
78# endif
79#endif
80#else /* !CONFIG_PPC64 */
81		HEAD_TEXT
82#endif
83	} :kernel
84
85	__head_end = .;
86
87#ifdef CONFIG_PPC64
88	/*
89	 * BLOCK(0) overrides the default output section alignment because
90	 * this needs to start right after .head.text in order for fixed
91	 * section placement to work.
92	 */
93	.text BLOCK(0) : AT(ADDR(.text) - LOAD_OFFSET) {
94#ifdef CONFIG_LD_HEAD_STUB_CATCH
95		KEEP(*(.linker_stub_catch));
96		. = . ;
97#endif
98
99#else
100	.text : AT(ADDR(.text) - LOAD_OFFSET) {
101		ALIGN_FUNCTION();
102#endif
103		/* careful! __ftr_alt_* sections need to be close to .text */
104		*(.text.hot TEXT_MAIN .text.fixup .text.unlikely .fixup __ftr_alt_* .ref.text);
105#ifdef CONFIG_PPC64
106		*(.tramp.ftrace.text);
107#endif
108		SCHED_TEXT
109		CPUIDLE_TEXT
110		LOCK_TEXT
111		KPROBES_TEXT
112		IRQENTRY_TEXT
113		SOFTIRQENTRY_TEXT
114		/*
115		 * -Os builds call FP save/restore functions. The powerpc64
116		 * linker generates those on demand in the .sfpr section.
117		 * .sfpr gets placed at the beginning of a group of input
118		 * sections, which can break start-of-text offset if it is
119		 * included with the main text sections, so put it by itself.
120		 */
121		*(.sfpr);
122		MEM_KEEP(init.text)
123		MEM_KEEP(exit.text)
124
125#ifdef CONFIG_PPC32
126		*(.got1)
127		__got2_start = .;
128		*(.got2)
129		__got2_end = .;
130#endif /* CONFIG_PPC32 */
131
132	} :kernel
133
134	. = ALIGN(PAGE_SIZE);
135	_etext = .;
136	PROVIDE32 (etext = .);
137
138	/* Read-only data */
139	RO_DATA(PAGE_SIZE)
140
141#ifdef CONFIG_PPC64
142	. = ALIGN(8);
143	__stf_entry_barrier_fixup : AT(ADDR(__stf_entry_barrier_fixup) - LOAD_OFFSET) {
144		__start___stf_entry_barrier_fixup = .;
145		*(__stf_entry_barrier_fixup)
146		__stop___stf_entry_barrier_fixup = .;
147	}
148
149	. = ALIGN(8);
150	__stf_exit_barrier_fixup : AT(ADDR(__stf_exit_barrier_fixup) - LOAD_OFFSET) {
151		__start___stf_exit_barrier_fixup = .;
152		*(__stf_exit_barrier_fixup)
153		__stop___stf_exit_barrier_fixup = .;
154	}
155
156	. = ALIGN(8);
157	__rfi_flush_fixup : AT(ADDR(__rfi_flush_fixup) - LOAD_OFFSET) {
158		__start___rfi_flush_fixup = .;
159		*(__rfi_flush_fixup)
160		__stop___rfi_flush_fixup = .;
161	}
162#endif /* CONFIG_PPC64 */
163
164#ifdef CONFIG_PPC_BARRIER_NOSPEC
165	. = ALIGN(8);
166	__spec_barrier_fixup : AT(ADDR(__spec_barrier_fixup) - LOAD_OFFSET) {
167		__start___barrier_nospec_fixup = .;
168		*(__barrier_nospec_fixup)
169		__stop___barrier_nospec_fixup = .;
170	}
171#endif /* CONFIG_PPC_BARRIER_NOSPEC */
172
173	EXCEPTION_TABLE(0)
174
175	NOTES :kernel :notes
176
177	/* The dummy segment contents for the bug workaround mentioned above
178	   near PHDRS.  */
179	.dummy : AT(ADDR(.dummy) - LOAD_OFFSET) {
180		LONG(0)
181		LONG(0)
182		LONG(0)
183	} :kernel :dummy
184
185/*
186 * Init sections discarded at runtime
187 */
188	. = ALIGN(STRICT_ALIGN_SIZE);
189	__init_begin = .;
190	. = ALIGN(PAGE_SIZE);
191	.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
192		_sinittext = .;
193		INIT_TEXT
194		_einittext = .;
195#ifdef CONFIG_PPC64
196		*(.tramp.ftrace.init);
197#endif
198	} :kernel
199
200	/* .exit.text is discarded at runtime, not link time,
201	 * to deal with references from __bug_table
202	 */
203	.exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
204		EXIT_TEXT
205	}
206
207	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
208		INIT_DATA
209		__vtop_table_begin = .;
210		KEEP(*(.vtop_fixup));
211		__vtop_table_end = .;
212		__ptov_table_begin = .;
213		KEEP(*(.ptov_fixup));
214		__ptov_table_end = .;
215	}
216
217	.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
218		INIT_SETUP(16)
219	}
220
221	.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
222		INIT_CALLS
223	}
224
225	.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
226		CON_INITCALL
227	}
228
229	. = ALIGN(8);
230	__ftr_fixup : AT(ADDR(__ftr_fixup) - LOAD_OFFSET) {
231		__start___ftr_fixup = .;
232		KEEP(*(__ftr_fixup))
233		__stop___ftr_fixup = .;
234	}
235	. = ALIGN(8);
236	__mmu_ftr_fixup : AT(ADDR(__mmu_ftr_fixup) - LOAD_OFFSET) {
237		__start___mmu_ftr_fixup = .;
238		KEEP(*(__mmu_ftr_fixup))
239		__stop___mmu_ftr_fixup = .;
240	}
241	. = ALIGN(8);
242	__lwsync_fixup : AT(ADDR(__lwsync_fixup) - LOAD_OFFSET) {
243		__start___lwsync_fixup = .;
244		KEEP(*(__lwsync_fixup))
245		__stop___lwsync_fixup = .;
246	}
247#ifdef CONFIG_PPC64
248	. = ALIGN(8);
249	__fw_ftr_fixup : AT(ADDR(__fw_ftr_fixup) - LOAD_OFFSET) {
250		__start___fw_ftr_fixup = .;
251		KEEP(*(__fw_ftr_fixup))
252		__stop___fw_ftr_fixup = .;
253	}
254#endif
255	.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
256		INIT_RAM_FS
257	}
258
259	PERCPU_SECTION(L1_CACHE_BYTES)
260
261	. = ALIGN(8);
262	.machine.desc : AT(ADDR(.machine.desc) - LOAD_OFFSET) {
263		__machine_desc_start = . ;
264		KEEP(*(.machine.desc))
265		__machine_desc_end = . ;
266	}
267#ifdef CONFIG_RELOCATABLE
268	. = ALIGN(8);
269	.dynsym : AT(ADDR(.dynsym) - LOAD_OFFSET)
270	{
271#ifdef CONFIG_PPC32
272		__dynamic_symtab = .;
273#endif
274		*(.dynsym)
275	}
276	.dynstr : AT(ADDR(.dynstr) - LOAD_OFFSET) { *(.dynstr) }
277	.dynamic : AT(ADDR(.dynamic) - LOAD_OFFSET)
278	{
279		__dynamic_start = .;
280		*(.dynamic)
281	}
282	.hash : AT(ADDR(.hash) - LOAD_OFFSET) { *(.hash) }
283	.interp : AT(ADDR(.interp) - LOAD_OFFSET) { *(.interp) }
284	.rela.dyn : AT(ADDR(.rela.dyn) - LOAD_OFFSET)
285	{
286		__rela_dyn_start = .;
287		*(.rela*)
288	}
289#endif
290	/* .exit.data is discarded at runtime, not link time,
291	 * to deal with references from .exit.text
292	 */
293	.exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
294		EXIT_DATA
295	}
296
297	/* freed after init ends here */
298	. = ALIGN(PAGE_SIZE);
299	__init_end = .;
300
301/*
302 * And now the various read/write data
303 */
304
305	. = ALIGN(PAGE_SIZE);
306	_sdata = .;
307
308#ifdef CONFIG_PPC32
309	.data : AT(ADDR(.data) - LOAD_OFFSET) {
310		DATA_DATA
311		*(.data.rel*)
312		*(SDATA_MAIN)
313		*(.sdata2)
314		*(.got.plt) *(.got)
315		*(.plt)
316	}
317#else
318	.data : AT(ADDR(.data) - LOAD_OFFSET) {
319		DATA_DATA
320		*(.data.rel*)
321		*(.toc1)
322		*(.branch_lt)
323	}
324
325	.opd : AT(ADDR(.opd) - LOAD_OFFSET) {
326		__start_opd = .;
327		KEEP(*(.opd))
328		__end_opd = .;
329	}
330
331	. = ALIGN(256);
332	.got : AT(ADDR(.got) - LOAD_OFFSET) {
333		__toc_start = .;
334#ifndef CONFIG_RELOCATABLE
335		__prom_init_toc_start = .;
336		arch/powerpc/kernel/prom_init.o*(.toc .got)
337		__prom_init_toc_end = .;
338#endif
339		*(.got)
340		*(.toc)
341	}
342#endif
343
344	/* The initial task and kernel stack */
345	INIT_TASK_DATA_SECTION(THREAD_SIZE)
346
347	.data..page_aligned : AT(ADDR(.data..page_aligned) - LOAD_OFFSET) {
348		PAGE_ALIGNED_DATA(PAGE_SIZE)
349	}
350
351	.data..cacheline_aligned : AT(ADDR(.data..cacheline_aligned) - LOAD_OFFSET) {
352		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
353	}
354
355	.data..read_mostly : AT(ADDR(.data..read_mostly) - LOAD_OFFSET) {
356		READ_MOSTLY_DATA(L1_CACHE_BYTES)
357	}
358
359	. = ALIGN(PAGE_SIZE);
360	.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
361		NOSAVE_DATA
362	}
363
364	BUG_TABLE
365
366	. = ALIGN(PAGE_SIZE);
367	_edata  =  .;
368	PROVIDE32 (edata = .);
369
370/*
371 * And finally the bss
372 */
373
374	BSS_SECTION(0, 0, 0)
375
376	. = ALIGN(PAGE_SIZE);
377	_end = . ;
378	PROVIDE32 (end = .);
379
380	STABS_DEBUG
381
382	DWARF_DEBUG
383
384	DISCARDS
385	/DISCARD/ : {
386		*(*.EMB.apuinfo)
387		*(.glink .iplt .plt .rela* .comment)
388		*(.gnu.version*)
389		*(.gnu.attributes)
390		*(.eh_frame)
391	}
392}
393