1/* SPDX-License-Identifier: GPL-2.0 */ 2#include <asm/processor.h> 3#include <asm/ppc_asm.h> 4#include <asm/reg.h> 5#include <asm/asm-offsets.h> 6#include <asm/cputable.h> 7#include <asm/thread_info.h> 8#include <asm/page.h> 9#include <asm/ptrace.h> 10#include <asm/export.h> 11#include <asm/asm-compat.h> 12 13/* 14 * Load state from memory into VMX registers including VSCR. 15 * Assumes the caller has enabled VMX in the MSR. 16 */ 17_GLOBAL(load_vr_state) 18 li r4,VRSTATE_VSCR 19 lvx v0,r4,r3 20 mtvscr v0 21 REST_32VRS(0,r4,r3) 22 blr 23EXPORT_SYMBOL(load_vr_state) 24_ASM_NOKPROBE_SYMBOL(load_vr_state); /* used by restore_math */ 25 26/* 27 * Store VMX state into memory, including VSCR. 28 * Assumes the caller has enabled VMX in the MSR. 29 */ 30_GLOBAL(store_vr_state) 31 SAVE_32VRS(0, r4, r3) 32 mfvscr v0 33 li r4, VRSTATE_VSCR 34 stvx v0, r4, r3 35 blr 36EXPORT_SYMBOL(store_vr_state) 37 38/* 39 * Disable VMX for the task which had it previously, 40 * and save its vector registers in its thread_struct. 41 * Enables the VMX for use in the kernel on return. 42 * On SMP we know the VMX is free, since we give it up every 43 * switch (ie, no lazy save of the vector registers). 44 * 45 * Note that on 32-bit this can only use registers that will be 46 * restored by fast_exception_return, i.e. r3 - r6, r10 and r11. 47 */ 48_GLOBAL(load_up_altivec) 49 mfmsr r5 /* grab the current MSR */ 50 oris r5,r5,MSR_VEC@h 51 MTMSRD(r5) /* enable use of AltiVec now */ 52 isync 53 54 /* 55 * While userspace in general ignores VRSAVE, glibc uses it as a boolean 56 * to optimise userspace context save/restore. Whenever we take an 57 * altivec unavailable exception we must set VRSAVE to something non 58 * zero. Set it to all 1s. See also the programming note in the ISA. 59 */ 60 mfspr r4,SPRN_VRSAVE 61 cmpwi 0,r4,0 62 bne+ 1f 63 li r4,-1 64 mtspr SPRN_VRSAVE,r4 651: 66 /* enable use of VMX after return */ 67#ifdef CONFIG_PPC32 68 mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */ 69 oris r9,r9,MSR_VEC@h 70 tovirt(r5, r5) 71#else 72 ld r4,PACACURRENT(r13) 73 addi r5,r4,THREAD /* Get THREAD */ 74 oris r12,r12,MSR_VEC@h 75 std r12,_MSR(r1) 76#endif 77 li r4,1 78 stb r4,THREAD_LOAD_VEC(r5) 79 addi r6,r5,THREAD_VRSTATE 80 li r4,1 81 li r10,VRSTATE_VSCR 82 stw r4,THREAD_USED_VR(r5) 83 lvx v0,r10,r6 84 mtvscr v0 85 REST_32VRS(0,r4,r6) 86 /* restore registers and return */ 87 blr 88_ASM_NOKPROBE_SYMBOL(load_up_altivec) 89 90/* 91 * save_altivec(tsk) 92 * Save the vector registers to its thread_struct 93 */ 94_GLOBAL(save_altivec) 95 addi r3,r3,THREAD /* want THREAD of task */ 96 PPC_LL r7,THREAD_VRSAVEAREA(r3) 97 PPC_LL r5,PT_REGS(r3) 98 PPC_LCMPI 0,r7,0 99 bne 2f 100 addi r7,r3,THREAD_VRSTATE 1012: SAVE_32VRS(0,r4,r7) 102 mfvscr v0 103 li r4,VRSTATE_VSCR 104 stvx v0,r4,r7 105 blr 106 107#ifdef CONFIG_VSX 108 109#ifdef CONFIG_PPC32 110#error This asm code isn't ready for 32-bit kernels 111#endif 112 113/* 114 * load_up_vsx(unused, unused, tsk) 115 * Disable VSX for the task which had it previously, 116 * and save its vector registers in its thread_struct. 117 * Reuse the fp and vsx saves, but first check to see if they have 118 * been saved already. 119 */ 120_GLOBAL(load_up_vsx) 121/* Load FP and VSX registers if they haven't been done yet */ 122 andi. r5,r12,MSR_FP 123 beql+ load_up_fpu /* skip if already loaded */ 124 andis. r5,r12,MSR_VEC@h 125 beql+ load_up_altivec /* skip if already loaded */ 126 127 ld r4,PACACURRENT(r13) 128 addi r4,r4,THREAD /* Get THREAD */ 129 li r6,1 130 stw r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */ 131 /* enable use of VSX after return */ 132 oris r12,r12,MSR_VSX@h 133 std r12,_MSR(r1) 134 b fast_interrupt_return 135 136#endif /* CONFIG_VSX */ 137 138 139/* 140 * The routines below are in assembler so we can closely control the 141 * usage of floating-point registers. These routines must be called 142 * with preempt disabled. 143 */ 144#ifdef CONFIG_PPC32 145 .data 146fpzero: 147 .long 0 148fpone: 149 .long 0x3f800000 /* 1.0 in single-precision FP */ 150fphalf: 151 .long 0x3f000000 /* 0.5 in single-precision FP */ 152 153#define LDCONST(fr, name) \ 154 lis r11,name@ha; \ 155 lfs fr,name@l(r11) 156#else 157 158 .section ".toc","aw" 159fpzero: 160 .tc FD_0_0[TC],0 161fpone: 162 .tc FD_3ff00000_0[TC],0x3ff0000000000000 /* 1.0 */ 163fphalf: 164 .tc FD_3fe00000_0[TC],0x3fe0000000000000 /* 0.5 */ 165 166#define LDCONST(fr, name) \ 167 lfd fr,name@toc(r2) 168#endif 169 170 .text 171/* 172 * Internal routine to enable floating point and set FPSCR to 0. 173 * Don't call it from C; it doesn't use the normal calling convention. 174 */ 175fpenable: 176#ifdef CONFIG_PPC32 177 stwu r1,-64(r1) 178#else 179 stdu r1,-64(r1) 180#endif 181 mfmsr r10 182 ori r11,r10,MSR_FP 183 mtmsr r11 184 isync 185 stfd fr0,24(r1) 186 stfd fr1,16(r1) 187 stfd fr31,8(r1) 188 LDCONST(fr1, fpzero) 189 mffs fr31 190 MTFSF_L(fr1) 191 blr 192 193fpdisable: 194 mtlr r12 195 MTFSF_L(fr31) 196 lfd fr31,8(r1) 197 lfd fr1,16(r1) 198 lfd fr0,24(r1) 199 mtmsr r10 200 isync 201 addi r1,r1,64 202 blr 203 204/* 205 * Vector add, floating point. 206 */ 207_GLOBAL(vaddfp) 208 mflr r12 209 bl fpenable 210 li r0,4 211 mtctr r0 212 li r6,0 2131: lfsx fr0,r4,r6 214 lfsx fr1,r5,r6 215 fadds fr0,fr0,fr1 216 stfsx fr0,r3,r6 217 addi r6,r6,4 218 bdnz 1b 219 b fpdisable 220 221/* 222 * Vector subtract, floating point. 223 */ 224_GLOBAL(vsubfp) 225 mflr r12 226 bl fpenable 227 li r0,4 228 mtctr r0 229 li r6,0 2301: lfsx fr0,r4,r6 231 lfsx fr1,r5,r6 232 fsubs fr0,fr0,fr1 233 stfsx fr0,r3,r6 234 addi r6,r6,4 235 bdnz 1b 236 b fpdisable 237 238/* 239 * Vector multiply and add, floating point. 240 */ 241_GLOBAL(vmaddfp) 242 mflr r12 243 bl fpenable 244 stfd fr2,32(r1) 245 li r0,4 246 mtctr r0 247 li r7,0 2481: lfsx fr0,r4,r7 249 lfsx fr1,r5,r7 250 lfsx fr2,r6,r7 251 fmadds fr0,fr0,fr2,fr1 252 stfsx fr0,r3,r7 253 addi r7,r7,4 254 bdnz 1b 255 lfd fr2,32(r1) 256 b fpdisable 257 258/* 259 * Vector negative multiply and subtract, floating point. 260 */ 261_GLOBAL(vnmsubfp) 262 mflr r12 263 bl fpenable 264 stfd fr2,32(r1) 265 li r0,4 266 mtctr r0 267 li r7,0 2681: lfsx fr0,r4,r7 269 lfsx fr1,r5,r7 270 lfsx fr2,r6,r7 271 fnmsubs fr0,fr0,fr2,fr1 272 stfsx fr0,r3,r7 273 addi r7,r7,4 274 bdnz 1b 275 lfd fr2,32(r1) 276 b fpdisable 277 278/* 279 * Vector reciprocal estimate. We just compute 1.0/x. 280 * r3 -> destination, r4 -> source. 281 */ 282_GLOBAL(vrefp) 283 mflr r12 284 bl fpenable 285 li r0,4 286 LDCONST(fr1, fpone) 287 mtctr r0 288 li r6,0 2891: lfsx fr0,r4,r6 290 fdivs fr0,fr1,fr0 291 stfsx fr0,r3,r6 292 addi r6,r6,4 293 bdnz 1b 294 b fpdisable 295 296/* 297 * Vector reciprocal square-root estimate, floating point. 298 * We use the frsqrte instruction for the initial estimate followed 299 * by 2 iterations of Newton-Raphson to get sufficient accuracy. 300 * r3 -> destination, r4 -> source. 301 */ 302_GLOBAL(vrsqrtefp) 303 mflr r12 304 bl fpenable 305 stfd fr2,32(r1) 306 stfd fr3,40(r1) 307 stfd fr4,48(r1) 308 stfd fr5,56(r1) 309 li r0,4 310 LDCONST(fr4, fpone) 311 LDCONST(fr5, fphalf) 312 mtctr r0 313 li r6,0 3141: lfsx fr0,r4,r6 315 frsqrte fr1,fr0 /* r = frsqrte(s) */ 316 fmuls fr3,fr1,fr0 /* r * s */ 317 fmuls fr2,fr1,fr5 /* r * 0.5 */ 318 fnmsubs fr3,fr1,fr3,fr4 /* 1 - s * r * r */ 319 fmadds fr1,fr2,fr3,fr1 /* r = r + 0.5 * r * (1 - s * r * r) */ 320 fmuls fr3,fr1,fr0 /* r * s */ 321 fmuls fr2,fr1,fr5 /* r * 0.5 */ 322 fnmsubs fr3,fr1,fr3,fr4 /* 1 - s * r * r */ 323 fmadds fr1,fr2,fr3,fr1 /* r = r + 0.5 * r * (1 - s * r * r) */ 324 stfsx fr1,r3,r6 325 addi r6,r6,4 326 bdnz 1b 327 lfd fr5,56(r1) 328 lfd fr4,48(r1) 329 lfd fr3,40(r1) 330 lfd fr2,32(r1) 331 b fpdisable 332