1 /* 2 * PowerPC version 3 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) 4 * 5 * Derived from "arch/i386/kernel/signal.c" 6 * Copyright (C) 1991, 1992 Linus Torvalds 7 * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * as published by the Free Software Foundation; either version 12 * 2 of the License, or (at your option) any later version. 13 */ 14 15 #include <linux/sched.h> 16 #include <linux/mm.h> 17 #include <linux/smp.h> 18 #include <linux/kernel.h> 19 #include <linux/signal.h> 20 #include <linux/errno.h> 21 #include <linux/wait.h> 22 #include <linux/unistd.h> 23 #include <linux/stddef.h> 24 #include <linux/elf.h> 25 #include <linux/ptrace.h> 26 #include <linux/ratelimit.h> 27 28 #include <asm/sigcontext.h> 29 #include <asm/ucontext.h> 30 #include <asm/uaccess.h> 31 #include <asm/pgtable.h> 32 #include <asm/unistd.h> 33 #include <asm/cacheflush.h> 34 #include <asm/syscalls.h> 35 #include <asm/vdso.h> 36 #include <asm/switch_to.h> 37 #include <asm/tm.h> 38 39 #include "signal.h" 40 41 42 #define GP_REGS_SIZE min(sizeof(elf_gregset_t), sizeof(struct pt_regs)) 43 #define FP_REGS_SIZE sizeof(elf_fpregset_t) 44 45 #define TRAMP_TRACEBACK 3 46 #define TRAMP_SIZE 6 47 48 /* 49 * When we have signals to deliver, we set up on the user stack, 50 * going down from the original stack pointer: 51 * 1) a rt_sigframe struct which contains the ucontext 52 * 2) a gap of __SIGNAL_FRAMESIZE bytes which acts as a dummy caller 53 * frame for the signal handler. 54 */ 55 56 struct rt_sigframe { 57 /* sys_rt_sigreturn requires the ucontext be the first field */ 58 struct ucontext uc; 59 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM 60 struct ucontext uc_transact; 61 #endif 62 unsigned long _unused[2]; 63 unsigned int tramp[TRAMP_SIZE]; 64 struct siginfo __user *pinfo; 65 void __user *puc; 66 struct siginfo info; 67 /* New 64 bit little-endian ABI allows redzone of 512 bytes below sp */ 68 char abigap[USER_REDZONE_SIZE]; 69 } __attribute__ ((aligned (16))); 70 71 static const char fmt32[] = KERN_INFO \ 72 "%s[%d]: bad frame in %s: %08lx nip %08lx lr %08lx\n"; 73 static const char fmt64[] = KERN_INFO \ 74 "%s[%d]: bad frame in %s: %016lx nip %016lx lr %016lx\n"; 75 76 /* 77 * Set up the sigcontext for the signal frame. 78 */ 79 80 static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, 81 int signr, sigset_t *set, unsigned long handler, 82 int ctx_has_vsx_region) 83 { 84 /* When CONFIG_ALTIVEC is set, we _always_ setup v_regs even if the 85 * process never used altivec yet (MSR_VEC is zero in pt_regs of 86 * the context). This is very important because we must ensure we 87 * don't lose the VRSAVE content that may have been set prior to 88 * the process doing its first vector operation 89 * Userland shall check AT_HWCAP to know whether it can rely on the 90 * v_regs pointer or not 91 */ 92 #ifdef CONFIG_ALTIVEC 93 elf_vrreg_t __user *v_regs = (elf_vrreg_t __user *)(((unsigned long)sc->vmx_reserve + 15) & ~0xful); 94 #endif 95 unsigned long msr = regs->msr; 96 long err = 0; 97 98 #ifdef CONFIG_ALTIVEC 99 err |= __put_user(v_regs, &sc->v_regs); 100 101 /* save altivec registers */ 102 if (current->thread.used_vr) { 103 flush_altivec_to_thread(current); 104 /* Copy 33 vec registers (vr0..31 and vscr) to the stack */ 105 err |= __copy_to_user(v_regs, ¤t->thread.vr_state, 106 33 * sizeof(vector128)); 107 /* set MSR_VEC in the MSR value in the frame to indicate that sc->v_reg) 108 * contains valid data. 109 */ 110 msr |= MSR_VEC; 111 } 112 /* We always copy to/from vrsave, it's 0 if we don't have or don't 113 * use altivec. 114 */ 115 if (cpu_has_feature(CPU_FTR_ALTIVEC)) 116 current->thread.vrsave = mfspr(SPRN_VRSAVE); 117 err |= __put_user(current->thread.vrsave, (u32 __user *)&v_regs[33]); 118 #else /* CONFIG_ALTIVEC */ 119 err |= __put_user(0, &sc->v_regs); 120 #endif /* CONFIG_ALTIVEC */ 121 flush_fp_to_thread(current); 122 /* copy fpr regs and fpscr */ 123 err |= copy_fpr_to_user(&sc->fp_regs, current); 124 125 /* 126 * Clear the MSR VSX bit to indicate there is no valid state attached 127 * to this context, except in the specific case below where we set it. 128 */ 129 msr &= ~MSR_VSX; 130 #ifdef CONFIG_VSX 131 /* 132 * Copy VSX low doubleword to local buffer for formatting, 133 * then out to userspace. Update v_regs to point after the 134 * VMX data. 135 */ 136 if (current->thread.used_vsr && ctx_has_vsx_region) { 137 __giveup_vsx(current); 138 v_regs += ELF_NVRREG; 139 err |= copy_vsx_to_user(v_regs, current); 140 /* set MSR_VSX in the MSR value in the frame to 141 * indicate that sc->vs_reg) contains valid data. 142 */ 143 msr |= MSR_VSX; 144 } 145 #endif /* CONFIG_VSX */ 146 err |= __put_user(&sc->gp_regs, &sc->regs); 147 WARN_ON(!FULL_REGS(regs)); 148 err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE); 149 err |= __put_user(msr, &sc->gp_regs[PT_MSR]); 150 err |= __put_user(signr, &sc->signal); 151 err |= __put_user(handler, &sc->handler); 152 if (set != NULL) 153 err |= __put_user(set->sig[0], &sc->oldmask); 154 155 return err; 156 } 157 158 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM 159 /* 160 * As above, but Transactional Memory is in use, so deliver sigcontexts 161 * containing checkpointed and transactional register states. 162 * 163 * To do this, we treclaim (done before entering here) to gather both sets of 164 * registers and set up the 'normal' sigcontext registers with rolled-back 165 * register values such that a simple signal handler sees a correct 166 * checkpointed register state. If interested, a TM-aware sighandler can 167 * examine the transactional registers in the 2nd sigcontext to determine the 168 * real origin of the signal. 169 */ 170 static long setup_tm_sigcontexts(struct sigcontext __user *sc, 171 struct sigcontext __user *tm_sc, 172 struct pt_regs *regs, 173 int signr, sigset_t *set, unsigned long handler) 174 { 175 /* When CONFIG_ALTIVEC is set, we _always_ setup v_regs even if the 176 * process never used altivec yet (MSR_VEC is zero in pt_regs of 177 * the context). This is very important because we must ensure we 178 * don't lose the VRSAVE content that may have been set prior to 179 * the process doing its first vector operation 180 * Userland shall check AT_HWCAP to know wether it can rely on the 181 * v_regs pointer or not. 182 */ 183 #ifdef CONFIG_ALTIVEC 184 elf_vrreg_t __user *v_regs = (elf_vrreg_t __user *) 185 (((unsigned long)sc->vmx_reserve + 15) & ~0xful); 186 elf_vrreg_t __user *tm_v_regs = (elf_vrreg_t __user *) 187 (((unsigned long)tm_sc->vmx_reserve + 15) & ~0xful); 188 #endif 189 unsigned long msr = regs->msr; 190 long err = 0; 191 192 BUG_ON(!MSR_TM_ACTIVE(regs->msr)); 193 194 /* Remove TM bits from thread's MSR. The MSR in the sigcontext 195 * just indicates to userland that we were doing a transaction, but we 196 * don't want to return in transactional state. This also ensures 197 * that flush_fp_to_thread won't set TIF_RESTORE_TM again. 198 */ 199 regs->msr &= ~MSR_TS_MASK; 200 201 flush_fp_to_thread(current); 202 203 #ifdef CONFIG_ALTIVEC 204 err |= __put_user(v_regs, &sc->v_regs); 205 err |= __put_user(tm_v_regs, &tm_sc->v_regs); 206 207 /* save altivec registers */ 208 if (current->thread.used_vr) { 209 flush_altivec_to_thread(current); 210 /* Copy 33 vec registers (vr0..31 and vscr) to the stack */ 211 err |= __copy_to_user(v_regs, ¤t->thread.vr_state, 212 33 * sizeof(vector128)); 213 /* If VEC was enabled there are transactional VRs valid too, 214 * else they're a copy of the checkpointed VRs. 215 */ 216 if (msr & MSR_VEC) 217 err |= __copy_to_user(tm_v_regs, 218 ¤t->thread.transact_vr, 219 33 * sizeof(vector128)); 220 else 221 err |= __copy_to_user(tm_v_regs, 222 ¤t->thread.vr_state, 223 33 * sizeof(vector128)); 224 225 /* set MSR_VEC in the MSR value in the frame to indicate 226 * that sc->v_reg contains valid data. 227 */ 228 msr |= MSR_VEC; 229 } 230 /* We always copy to/from vrsave, it's 0 if we don't have or don't 231 * use altivec. 232 */ 233 if (cpu_has_feature(CPU_FTR_ALTIVEC)) 234 current->thread.vrsave = mfspr(SPRN_VRSAVE); 235 err |= __put_user(current->thread.vrsave, (u32 __user *)&v_regs[33]); 236 if (msr & MSR_VEC) 237 err |= __put_user(current->thread.transact_vrsave, 238 (u32 __user *)&tm_v_regs[33]); 239 else 240 err |= __put_user(current->thread.vrsave, 241 (u32 __user *)&tm_v_regs[33]); 242 243 #else /* CONFIG_ALTIVEC */ 244 err |= __put_user(0, &sc->v_regs); 245 err |= __put_user(0, &tm_sc->v_regs); 246 #endif /* CONFIG_ALTIVEC */ 247 248 /* copy fpr regs and fpscr */ 249 err |= copy_fpr_to_user(&sc->fp_regs, current); 250 if (msr & MSR_FP) 251 err |= copy_transact_fpr_to_user(&tm_sc->fp_regs, current); 252 else 253 err |= copy_fpr_to_user(&tm_sc->fp_regs, current); 254 255 #ifdef CONFIG_VSX 256 /* 257 * Copy VSX low doubleword to local buffer for formatting, 258 * then out to userspace. Update v_regs to point after the 259 * VMX data. 260 */ 261 if (current->thread.used_vsr) { 262 __giveup_vsx(current); 263 v_regs += ELF_NVRREG; 264 tm_v_regs += ELF_NVRREG; 265 266 err |= copy_vsx_to_user(v_regs, current); 267 268 if (msr & MSR_VSX) 269 err |= copy_transact_vsx_to_user(tm_v_regs, current); 270 else 271 err |= copy_vsx_to_user(tm_v_regs, current); 272 273 /* set MSR_VSX in the MSR value in the frame to 274 * indicate that sc->vs_reg) contains valid data. 275 */ 276 msr |= MSR_VSX; 277 } 278 #endif /* CONFIG_VSX */ 279 280 err |= __put_user(&sc->gp_regs, &sc->regs); 281 err |= __put_user(&tm_sc->gp_regs, &tm_sc->regs); 282 WARN_ON(!FULL_REGS(regs)); 283 err |= __copy_to_user(&tm_sc->gp_regs, regs, GP_REGS_SIZE); 284 err |= __copy_to_user(&sc->gp_regs, 285 ¤t->thread.ckpt_regs, GP_REGS_SIZE); 286 err |= __put_user(msr, &tm_sc->gp_regs[PT_MSR]); 287 err |= __put_user(msr, &sc->gp_regs[PT_MSR]); 288 err |= __put_user(signr, &sc->signal); 289 err |= __put_user(handler, &sc->handler); 290 if (set != NULL) 291 err |= __put_user(set->sig[0], &sc->oldmask); 292 293 return err; 294 } 295 #endif 296 297 /* 298 * Restore the sigcontext from the signal frame. 299 */ 300 301 static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig, 302 struct sigcontext __user *sc) 303 { 304 #ifdef CONFIG_ALTIVEC 305 elf_vrreg_t __user *v_regs; 306 #endif 307 unsigned long err = 0; 308 unsigned long save_r13 = 0; 309 unsigned long msr; 310 #ifdef CONFIG_VSX 311 int i; 312 #endif 313 314 /* If this is not a signal return, we preserve the TLS in r13 */ 315 if (!sig) 316 save_r13 = regs->gpr[13]; 317 318 /* copy the GPRs */ 319 err |= __copy_from_user(regs->gpr, sc->gp_regs, sizeof(regs->gpr)); 320 err |= __get_user(regs->nip, &sc->gp_regs[PT_NIP]); 321 /* get MSR separately, transfer the LE bit if doing signal return */ 322 err |= __get_user(msr, &sc->gp_regs[PT_MSR]); 323 if (sig) 324 regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE); 325 err |= __get_user(regs->orig_gpr3, &sc->gp_regs[PT_ORIG_R3]); 326 err |= __get_user(regs->ctr, &sc->gp_regs[PT_CTR]); 327 err |= __get_user(regs->link, &sc->gp_regs[PT_LNK]); 328 err |= __get_user(regs->xer, &sc->gp_regs[PT_XER]); 329 err |= __get_user(regs->ccr, &sc->gp_regs[PT_CCR]); 330 /* skip SOFTE */ 331 regs->trap = 0; 332 err |= __get_user(regs->dar, &sc->gp_regs[PT_DAR]); 333 err |= __get_user(regs->dsisr, &sc->gp_regs[PT_DSISR]); 334 err |= __get_user(regs->result, &sc->gp_regs[PT_RESULT]); 335 336 if (!sig) 337 regs->gpr[13] = save_r13; 338 if (set != NULL) 339 err |= __get_user(set->sig[0], &sc->oldmask); 340 341 /* 342 * Do this before updating the thread state in 343 * current->thread.fpr/vr. That way, if we get preempted 344 * and another task grabs the FPU/Altivec, it won't be 345 * tempted to save the current CPU state into the thread_struct 346 * and corrupt what we are writing there. 347 */ 348 discard_lazy_cpu_state(); 349 350 /* 351 * Force reload of FP/VEC. 352 * This has to be done before copying stuff into current->thread.fpr/vr 353 * for the reasons explained in the previous comment. 354 */ 355 regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC | MSR_VSX); 356 357 #ifdef CONFIG_ALTIVEC 358 err |= __get_user(v_regs, &sc->v_regs); 359 if (err) 360 return err; 361 if (v_regs && !access_ok(VERIFY_READ, v_regs, 34 * sizeof(vector128))) 362 return -EFAULT; 363 /* Copy 33 vec registers (vr0..31 and vscr) from the stack */ 364 if (v_regs != NULL && (msr & MSR_VEC) != 0) 365 err |= __copy_from_user(¤t->thread.vr_state, v_regs, 366 33 * sizeof(vector128)); 367 else if (current->thread.used_vr) 368 memset(¤t->thread.vr_state, 0, 33 * sizeof(vector128)); 369 /* Always get VRSAVE back */ 370 if (v_regs != NULL) 371 err |= __get_user(current->thread.vrsave, (u32 __user *)&v_regs[33]); 372 else 373 current->thread.vrsave = 0; 374 if (cpu_has_feature(CPU_FTR_ALTIVEC)) 375 mtspr(SPRN_VRSAVE, current->thread.vrsave); 376 #endif /* CONFIG_ALTIVEC */ 377 /* restore floating point */ 378 err |= copy_fpr_from_user(current, &sc->fp_regs); 379 #ifdef CONFIG_VSX 380 /* 381 * Get additional VSX data. Update v_regs to point after the 382 * VMX data. Copy VSX low doubleword from userspace to local 383 * buffer for formatting, then into the taskstruct. 384 */ 385 v_regs += ELF_NVRREG; 386 if ((msr & MSR_VSX) != 0) 387 err |= copy_vsx_from_user(current, v_regs); 388 else 389 for (i = 0; i < 32 ; i++) 390 current->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = 0; 391 #endif 392 return err; 393 } 394 395 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM 396 /* 397 * Restore the two sigcontexts from the frame of a transactional processes. 398 */ 399 400 static long restore_tm_sigcontexts(struct pt_regs *regs, 401 struct sigcontext __user *sc, 402 struct sigcontext __user *tm_sc) 403 { 404 #ifdef CONFIG_ALTIVEC 405 elf_vrreg_t __user *v_regs, *tm_v_regs; 406 #endif 407 unsigned long err = 0; 408 unsigned long msr; 409 #ifdef CONFIG_VSX 410 int i; 411 #endif 412 /* copy the GPRs */ 413 err |= __copy_from_user(regs->gpr, tm_sc->gp_regs, sizeof(regs->gpr)); 414 err |= __copy_from_user(¤t->thread.ckpt_regs, sc->gp_regs, 415 sizeof(regs->gpr)); 416 417 /* 418 * TFHAR is restored from the checkpointed 'wound-back' ucontext's NIP. 419 * TEXASR was set by the signal delivery reclaim, as was TFIAR. 420 * Users doing anything abhorrent like thread-switching w/ signals for 421 * TM-Suspended code will have to back TEXASR/TFIAR up themselves. 422 * For the case of getting a signal and simply returning from it, 423 * we don't need to re-copy them here. 424 */ 425 err |= __get_user(regs->nip, &tm_sc->gp_regs[PT_NIP]); 426 err |= __get_user(current->thread.tm_tfhar, &sc->gp_regs[PT_NIP]); 427 428 /* get MSR separately, transfer the LE bit if doing signal return */ 429 err |= __get_user(msr, &sc->gp_regs[PT_MSR]); 430 /* pull in MSR TM from user context */ 431 regs->msr = (regs->msr & ~MSR_TS_MASK) | (msr & MSR_TS_MASK); 432 433 /* pull in MSR LE from user context */ 434 regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE); 435 436 /* The following non-GPR non-FPR non-VR state is also checkpointed: */ 437 err |= __get_user(regs->ctr, &tm_sc->gp_regs[PT_CTR]); 438 err |= __get_user(regs->link, &tm_sc->gp_regs[PT_LNK]); 439 err |= __get_user(regs->xer, &tm_sc->gp_regs[PT_XER]); 440 err |= __get_user(regs->ccr, &tm_sc->gp_regs[PT_CCR]); 441 err |= __get_user(current->thread.ckpt_regs.ctr, 442 &sc->gp_regs[PT_CTR]); 443 err |= __get_user(current->thread.ckpt_regs.link, 444 &sc->gp_regs[PT_LNK]); 445 err |= __get_user(current->thread.ckpt_regs.xer, 446 &sc->gp_regs[PT_XER]); 447 err |= __get_user(current->thread.ckpt_regs.ccr, 448 &sc->gp_regs[PT_CCR]); 449 450 /* These regs are not checkpointed; they can go in 'regs'. */ 451 err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]); 452 err |= __get_user(regs->dar, &sc->gp_regs[PT_DAR]); 453 err |= __get_user(regs->dsisr, &sc->gp_regs[PT_DSISR]); 454 err |= __get_user(regs->result, &sc->gp_regs[PT_RESULT]); 455 456 /* 457 * Do this before updating the thread state in 458 * current->thread.fpr/vr. That way, if we get preempted 459 * and another task grabs the FPU/Altivec, it won't be 460 * tempted to save the current CPU state into the thread_struct 461 * and corrupt what we are writing there. 462 */ 463 discard_lazy_cpu_state(); 464 465 /* 466 * Force reload of FP/VEC. 467 * This has to be done before copying stuff into current->thread.fpr/vr 468 * for the reasons explained in the previous comment. 469 */ 470 regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC | MSR_VSX); 471 472 #ifdef CONFIG_ALTIVEC 473 err |= __get_user(v_regs, &sc->v_regs); 474 err |= __get_user(tm_v_regs, &tm_sc->v_regs); 475 if (err) 476 return err; 477 if (v_regs && !access_ok(VERIFY_READ, v_regs, 34 * sizeof(vector128))) 478 return -EFAULT; 479 if (tm_v_regs && !access_ok(VERIFY_READ, 480 tm_v_regs, 34 * sizeof(vector128))) 481 return -EFAULT; 482 /* Copy 33 vec registers (vr0..31 and vscr) from the stack */ 483 if (v_regs != NULL && tm_v_regs != NULL && (msr & MSR_VEC) != 0) { 484 err |= __copy_from_user(¤t->thread.vr_state, v_regs, 485 33 * sizeof(vector128)); 486 err |= __copy_from_user(¤t->thread.transact_vr, tm_v_regs, 487 33 * sizeof(vector128)); 488 } 489 else if (current->thread.used_vr) { 490 memset(¤t->thread.vr_state, 0, 33 * sizeof(vector128)); 491 memset(¤t->thread.transact_vr, 0, 33 * sizeof(vector128)); 492 } 493 /* Always get VRSAVE back */ 494 if (v_regs != NULL && tm_v_regs != NULL) { 495 err |= __get_user(current->thread.vrsave, 496 (u32 __user *)&v_regs[33]); 497 err |= __get_user(current->thread.transact_vrsave, 498 (u32 __user *)&tm_v_regs[33]); 499 } 500 else { 501 current->thread.vrsave = 0; 502 current->thread.transact_vrsave = 0; 503 } 504 if (cpu_has_feature(CPU_FTR_ALTIVEC)) 505 mtspr(SPRN_VRSAVE, current->thread.vrsave); 506 #endif /* CONFIG_ALTIVEC */ 507 /* restore floating point */ 508 err |= copy_fpr_from_user(current, &sc->fp_regs); 509 err |= copy_transact_fpr_from_user(current, &tm_sc->fp_regs); 510 #ifdef CONFIG_VSX 511 /* 512 * Get additional VSX data. Update v_regs to point after the 513 * VMX data. Copy VSX low doubleword from userspace to local 514 * buffer for formatting, then into the taskstruct. 515 */ 516 if (v_regs && ((msr & MSR_VSX) != 0)) { 517 v_regs += ELF_NVRREG; 518 tm_v_regs += ELF_NVRREG; 519 err |= copy_vsx_from_user(current, v_regs); 520 err |= copy_transact_vsx_from_user(current, tm_v_regs); 521 } else { 522 for (i = 0; i < 32 ; i++) { 523 current->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = 0; 524 current->thread.transact_fp.fpr[i][TS_VSRLOWOFFSET] = 0; 525 } 526 } 527 #endif 528 tm_enable(); 529 /* Make sure the transaction is marked as failed */ 530 current->thread.tm_texasr |= TEXASR_FS; 531 /* This loads the checkpointed FP/VEC state, if used */ 532 tm_recheckpoint(¤t->thread, msr); 533 534 /* This loads the speculative FP/VEC state, if used */ 535 if (msr & MSR_FP) { 536 do_load_up_transact_fpu(¤t->thread); 537 regs->msr |= (MSR_FP | current->thread.fpexc_mode); 538 } 539 #ifdef CONFIG_ALTIVEC 540 if (msr & MSR_VEC) { 541 do_load_up_transact_altivec(¤t->thread); 542 regs->msr |= MSR_VEC; 543 } 544 #endif 545 546 return err; 547 } 548 #endif 549 550 /* 551 * Setup the trampoline code on the stack 552 */ 553 static long setup_trampoline(unsigned int syscall, unsigned int __user *tramp) 554 { 555 int i; 556 long err = 0; 557 558 /* addi r1, r1, __SIGNAL_FRAMESIZE # Pop the dummy stackframe */ 559 err |= __put_user(0x38210000UL | (__SIGNAL_FRAMESIZE & 0xffff), &tramp[0]); 560 /* li r0, __NR_[rt_]sigreturn| */ 561 err |= __put_user(0x38000000UL | (syscall & 0xffff), &tramp[1]); 562 /* sc */ 563 err |= __put_user(0x44000002UL, &tramp[2]); 564 565 /* Minimal traceback info */ 566 for (i=TRAMP_TRACEBACK; i < TRAMP_SIZE ;i++) 567 err |= __put_user(0, &tramp[i]); 568 569 if (!err) 570 flush_icache_range((unsigned long) &tramp[0], 571 (unsigned long) &tramp[TRAMP_SIZE]); 572 573 return err; 574 } 575 576 /* 577 * Userspace code may pass a ucontext which doesn't include VSX added 578 * at the end. We need to check for this case. 579 */ 580 #define UCONTEXTSIZEWITHOUTVSX \ 581 (sizeof(struct ucontext) - 32*sizeof(long)) 582 583 /* 584 * Handle {get,set,swap}_context operations 585 */ 586 int sys_swapcontext(struct ucontext __user *old_ctx, 587 struct ucontext __user *new_ctx, 588 long ctx_size, long r6, long r7, long r8, struct pt_regs *regs) 589 { 590 unsigned char tmp; 591 sigset_t set; 592 unsigned long new_msr = 0; 593 int ctx_has_vsx_region = 0; 594 595 if (new_ctx && 596 get_user(new_msr, &new_ctx->uc_mcontext.gp_regs[PT_MSR])) 597 return -EFAULT; 598 /* 599 * Check that the context is not smaller than the original 600 * size (with VMX but without VSX) 601 */ 602 if (ctx_size < UCONTEXTSIZEWITHOUTVSX) 603 return -EINVAL; 604 /* 605 * If the new context state sets the MSR VSX bits but 606 * it doesn't provide VSX state. 607 */ 608 if ((ctx_size < sizeof(struct ucontext)) && 609 (new_msr & MSR_VSX)) 610 return -EINVAL; 611 /* Does the context have enough room to store VSX data? */ 612 if (ctx_size >= sizeof(struct ucontext)) 613 ctx_has_vsx_region = 1; 614 615 if (old_ctx != NULL) { 616 if (!access_ok(VERIFY_WRITE, old_ctx, ctx_size) 617 || setup_sigcontext(&old_ctx->uc_mcontext, regs, 0, NULL, 0, 618 ctx_has_vsx_region) 619 || __copy_to_user(&old_ctx->uc_sigmask, 620 ¤t->blocked, sizeof(sigset_t))) 621 return -EFAULT; 622 } 623 if (new_ctx == NULL) 624 return 0; 625 if (!access_ok(VERIFY_READ, new_ctx, ctx_size) 626 || __get_user(tmp, (u8 __user *) new_ctx) 627 || __get_user(tmp, (u8 __user *) new_ctx + ctx_size - 1)) 628 return -EFAULT; 629 630 /* 631 * If we get a fault copying the context into the kernel's 632 * image of the user's registers, we can't just return -EFAULT 633 * because the user's registers will be corrupted. For instance 634 * the NIP value may have been updated but not some of the 635 * other registers. Given that we have done the access_ok 636 * and successfully read the first and last bytes of the region 637 * above, this should only happen in an out-of-memory situation 638 * or if another thread unmaps the region containing the context. 639 * We kill the task with a SIGSEGV in this situation. 640 */ 641 642 if (__copy_from_user(&set, &new_ctx->uc_sigmask, sizeof(set))) 643 do_exit(SIGSEGV); 644 set_current_blocked(&set); 645 if (restore_sigcontext(regs, NULL, 0, &new_ctx->uc_mcontext)) 646 do_exit(SIGSEGV); 647 648 /* This returns like rt_sigreturn */ 649 set_thread_flag(TIF_RESTOREALL); 650 return 0; 651 } 652 653 654 /* 655 * Do a signal return; undo the signal stack. 656 */ 657 658 int sys_rt_sigreturn(unsigned long r3, unsigned long r4, unsigned long r5, 659 unsigned long r6, unsigned long r7, unsigned long r8, 660 struct pt_regs *regs) 661 { 662 struct ucontext __user *uc = (struct ucontext __user *)regs->gpr[1]; 663 sigset_t set; 664 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM 665 unsigned long msr; 666 #endif 667 668 /* Always make any pending restarted system calls return -EINTR */ 669 current_thread_info()->restart_block.fn = do_no_restart_syscall; 670 671 if (!access_ok(VERIFY_READ, uc, sizeof(*uc))) 672 goto badframe; 673 674 if (__copy_from_user(&set, &uc->uc_sigmask, sizeof(set))) 675 goto badframe; 676 set_current_blocked(&set); 677 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM 678 if (__get_user(msr, &uc->uc_mcontext.gp_regs[PT_MSR])) 679 goto badframe; 680 if (MSR_TM_ACTIVE(msr)) { 681 /* We recheckpoint on return. */ 682 struct ucontext __user *uc_transact; 683 if (__get_user(uc_transact, &uc->uc_link)) 684 goto badframe; 685 if (restore_tm_sigcontexts(regs, &uc->uc_mcontext, 686 &uc_transact->uc_mcontext)) 687 goto badframe; 688 } 689 else 690 /* Fall through, for non-TM restore */ 691 #endif 692 if (restore_sigcontext(regs, NULL, 1, &uc->uc_mcontext)) 693 goto badframe; 694 695 if (restore_altstack(&uc->uc_stack)) 696 goto badframe; 697 698 set_thread_flag(TIF_RESTOREALL); 699 return 0; 700 701 badframe: 702 if (show_unhandled_signals) 703 printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32, 704 current->comm, current->pid, "rt_sigreturn", 705 (long)uc, regs->nip, regs->link); 706 707 force_sig(SIGSEGV, current); 708 return 0; 709 } 710 711 int handle_rt_signal64(int signr, struct k_sigaction *ka, siginfo_t *info, 712 sigset_t *set, struct pt_regs *regs) 713 { 714 struct rt_sigframe __user *frame; 715 unsigned long newsp = 0; 716 long err = 0; 717 718 frame = get_sigframe(ka, get_tm_stackpointer(regs), sizeof(*frame), 0); 719 if (unlikely(frame == NULL)) 720 goto badframe; 721 722 err |= __put_user(&frame->info, &frame->pinfo); 723 err |= __put_user(&frame->uc, &frame->puc); 724 err |= copy_siginfo_to_user(&frame->info, info); 725 if (err) 726 goto badframe; 727 728 /* Create the ucontext. */ 729 err |= __put_user(0, &frame->uc.uc_flags); 730 err |= __save_altstack(&frame->uc.uc_stack, regs->gpr[1]); 731 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM 732 if (MSR_TM_ACTIVE(regs->msr)) { 733 /* The ucontext_t passed to userland points to the second 734 * ucontext_t (for transactional state) with its uc_link ptr. 735 */ 736 err |= __put_user(&frame->uc_transact, &frame->uc.uc_link); 737 err |= setup_tm_sigcontexts(&frame->uc.uc_mcontext, 738 &frame->uc_transact.uc_mcontext, 739 regs, signr, 740 NULL, 741 (unsigned long)ka->sa.sa_handler); 742 } else 743 #endif 744 { 745 err |= __put_user(0, &frame->uc.uc_link); 746 err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, signr, 747 NULL, (unsigned long)ka->sa.sa_handler, 748 1); 749 } 750 err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); 751 if (err) 752 goto badframe; 753 754 /* Make sure signal handler doesn't get spurious FP exceptions */ 755 current->thread.fp_state.fpscr = 0; 756 757 /* Set up to return from userspace. */ 758 if (vdso64_rt_sigtramp && current->mm->context.vdso_base) { 759 regs->link = current->mm->context.vdso_base + vdso64_rt_sigtramp; 760 } else { 761 err |= setup_trampoline(__NR_rt_sigreturn, &frame->tramp[0]); 762 if (err) 763 goto badframe; 764 regs->link = (unsigned long) &frame->tramp[0]; 765 } 766 767 /* Allocate a dummy caller frame for the signal handler. */ 768 newsp = ((unsigned long)frame) - __SIGNAL_FRAMESIZE; 769 err |= put_user(regs->gpr[1], (unsigned long __user *)newsp); 770 771 /* Set up "regs" so we "return" to the signal handler. */ 772 if (is_elf2_task()) { 773 regs->nip = (unsigned long) ka->sa.sa_handler; 774 regs->gpr[12] = regs->nip; 775 } else { 776 /* Handler is *really* a pointer to the function descriptor for 777 * the signal routine. The first entry in the function 778 * descriptor is the entry address of signal and the second 779 * entry is the TOC value we need to use. 780 */ 781 func_descr_t __user *funct_desc_ptr = 782 (func_descr_t __user *) ka->sa.sa_handler; 783 784 err |= get_user(regs->nip, &funct_desc_ptr->entry); 785 err |= get_user(regs->gpr[2], &funct_desc_ptr->toc); 786 } 787 788 /* enter the signal handler in native-endian mode */ 789 regs->msr &= ~MSR_LE; 790 regs->msr |= (MSR_KERNEL & MSR_LE); 791 regs->gpr[1] = newsp; 792 regs->gpr[3] = signr; 793 regs->result = 0; 794 if (ka->sa.sa_flags & SA_SIGINFO) { 795 err |= get_user(regs->gpr[4], (unsigned long __user *)&frame->pinfo); 796 err |= get_user(regs->gpr[5], (unsigned long __user *)&frame->puc); 797 regs->gpr[6] = (unsigned long) frame; 798 } else { 799 regs->gpr[4] = (unsigned long)&frame->uc.uc_mcontext; 800 } 801 if (err) 802 goto badframe; 803 804 return 1; 805 806 badframe: 807 if (show_unhandled_signals) 808 printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32, 809 current->comm, current->pid, "setup_rt_frame", 810 (long)frame, regs->nip, regs->link); 811 812 force_sigsegv(signr, current); 813 return 0; 814 } 815