1 /* 2 * Common prep/pmac/chrp boot and setup code. 3 */ 4 5 #include <linux/module.h> 6 #include <linux/string.h> 7 #include <linux/sched.h> 8 #include <linux/init.h> 9 #include <linux/kernel.h> 10 #include <linux/reboot.h> 11 #include <linux/delay.h> 12 #include <linux/initrd.h> 13 #include <linux/tty.h> 14 #include <linux/bootmem.h> 15 #include <linux/seq_file.h> 16 #include <linux/root_dev.h> 17 #include <linux/cpu.h> 18 #include <linux/console.h> 19 #include <linux/memblock.h> 20 21 #include <asm/io.h> 22 #include <asm/prom.h> 23 #include <asm/processor.h> 24 #include <asm/pgtable.h> 25 #include <asm/setup.h> 26 #include <asm/smp.h> 27 #include <asm/elf.h> 28 #include <asm/cputable.h> 29 #include <asm/bootx.h> 30 #include <asm/btext.h> 31 #include <asm/machdep.h> 32 #include <asm/uaccess.h> 33 #include <asm/pmac_feature.h> 34 #include <asm/sections.h> 35 #include <asm/nvram.h> 36 #include <asm/xmon.h> 37 #include <asm/time.h> 38 #include <asm/serial.h> 39 #include <asm/udbg.h> 40 #include <asm/mmu_context.h> 41 #include <asm/epapr_hcalls.h> 42 43 #define DBG(fmt...) 44 45 extern void bootx_init(unsigned long r4, unsigned long phys); 46 47 int boot_cpuid_phys; 48 EXPORT_SYMBOL_GPL(boot_cpuid_phys); 49 50 int smp_hw_index[NR_CPUS]; 51 52 unsigned long ISA_DMA_THRESHOLD; 53 unsigned int DMA_MODE_READ; 54 unsigned int DMA_MODE_WRITE; 55 56 #ifdef CONFIG_VGA_CONSOLE 57 unsigned long vgacon_remap_base; 58 EXPORT_SYMBOL(vgacon_remap_base); 59 #endif 60 61 /* 62 * These are used in binfmt_elf.c to put aux entries on the stack 63 * for each elf executable being started. 64 */ 65 int dcache_bsize; 66 int icache_bsize; 67 int ucache_bsize; 68 69 /* 70 * We're called here very early in the boot. We determine the machine 71 * type and call the appropriate low-level setup functions. 72 * -- Cort <cort@fsmlabs.com> 73 * 74 * Note that the kernel may be running at an address which is different 75 * from the address that it was linked at, so we must use RELOC/PTRRELOC 76 * to access static data (including strings). -- paulus 77 */ 78 notrace unsigned long __init early_init(unsigned long dt_ptr) 79 { 80 unsigned long offset = reloc_offset(); 81 struct cpu_spec *spec; 82 83 /* First zero the BSS -- use memset_io, some platforms don't have 84 * caches on yet */ 85 memset_io((void __iomem *)PTRRELOC(&__bss_start), 0, 86 __bss_stop - __bss_start); 87 88 /* 89 * Identify the CPU type and fix up code sections 90 * that depend on which cpu we have. 91 */ 92 spec = identify_cpu(offset, mfspr(SPRN_PVR)); 93 94 do_feature_fixups(spec->cpu_features, 95 PTRRELOC(&__start___ftr_fixup), 96 PTRRELOC(&__stop___ftr_fixup)); 97 98 do_feature_fixups(spec->mmu_features, 99 PTRRELOC(&__start___mmu_ftr_fixup), 100 PTRRELOC(&__stop___mmu_ftr_fixup)); 101 102 do_lwsync_fixups(spec->cpu_features, 103 PTRRELOC(&__start___lwsync_fixup), 104 PTRRELOC(&__stop___lwsync_fixup)); 105 106 do_final_fixups(); 107 108 return KERNELBASE + offset; 109 } 110 111 112 /* 113 * Find out what kind of machine we're on and save any data we need 114 * from the early boot process (devtree is copied on pmac by prom_init()). 115 * This is called very early on the boot process, after a minimal 116 * MMU environment has been set up but before MMU_init is called. 117 */ 118 notrace void __init machine_init(u64 dt_ptr) 119 { 120 lockdep_init(); 121 122 /* Enable early debugging if any specified (see udbg.h) */ 123 udbg_early_init(); 124 125 /* Do some early initialization based on the flat device tree */ 126 early_init_devtree(__va(dt_ptr)); 127 128 epapr_paravirt_early_init(); 129 130 early_init_mmu(); 131 132 probe_machine(); 133 134 setup_kdump_trampoline(); 135 136 #ifdef CONFIG_6xx 137 if (cpu_has_feature(CPU_FTR_CAN_DOZE) || 138 cpu_has_feature(CPU_FTR_CAN_NAP)) 139 ppc_md.power_save = ppc6xx_idle; 140 #endif 141 142 #ifdef CONFIG_E500 143 if (cpu_has_feature(CPU_FTR_CAN_DOZE) || 144 cpu_has_feature(CPU_FTR_CAN_NAP)) 145 ppc_md.power_save = e500_idle; 146 #endif 147 if (ppc_md.progress) 148 ppc_md.progress("id mach(): done", 0x200); 149 } 150 151 /* Checks "l2cr=xxxx" command-line option */ 152 int __init ppc_setup_l2cr(char *str) 153 { 154 if (cpu_has_feature(CPU_FTR_L2CR)) { 155 unsigned long val = simple_strtoul(str, NULL, 0); 156 printk(KERN_INFO "l2cr set to %lx\n", val); 157 _set_L2CR(0); /* force invalidate by disable cache */ 158 _set_L2CR(val); /* and enable it */ 159 } 160 return 1; 161 } 162 __setup("l2cr=", ppc_setup_l2cr); 163 164 /* Checks "l3cr=xxxx" command-line option */ 165 int __init ppc_setup_l3cr(char *str) 166 { 167 if (cpu_has_feature(CPU_FTR_L3CR)) { 168 unsigned long val = simple_strtoul(str, NULL, 0); 169 printk(KERN_INFO "l3cr set to %lx\n", val); 170 _set_L3CR(val); /* and enable it */ 171 } 172 return 1; 173 } 174 __setup("l3cr=", ppc_setup_l3cr); 175 176 #ifdef CONFIG_GENERIC_NVRAM 177 178 /* Generic nvram hooks used by drivers/char/gen_nvram.c */ 179 unsigned char nvram_read_byte(int addr) 180 { 181 if (ppc_md.nvram_read_val) 182 return ppc_md.nvram_read_val(addr); 183 return 0xff; 184 } 185 EXPORT_SYMBOL(nvram_read_byte); 186 187 void nvram_write_byte(unsigned char val, int addr) 188 { 189 if (ppc_md.nvram_write_val) 190 ppc_md.nvram_write_val(addr, val); 191 } 192 EXPORT_SYMBOL(nvram_write_byte); 193 194 ssize_t nvram_get_size(void) 195 { 196 if (ppc_md.nvram_size) 197 return ppc_md.nvram_size(); 198 return -1; 199 } 200 EXPORT_SYMBOL(nvram_get_size); 201 202 void nvram_sync(void) 203 { 204 if (ppc_md.nvram_sync) 205 ppc_md.nvram_sync(); 206 } 207 EXPORT_SYMBOL(nvram_sync); 208 209 #endif /* CONFIG_NVRAM */ 210 211 int __init ppc_init(void) 212 { 213 /* clear the progress line */ 214 if (ppc_md.progress) 215 ppc_md.progress(" ", 0xffff); 216 217 /* call platform init */ 218 if (ppc_md.init != NULL) { 219 ppc_md.init(); 220 } 221 return 0; 222 } 223 224 arch_initcall(ppc_init); 225 226 static void __init irqstack_early_init(void) 227 { 228 unsigned int i; 229 230 /* interrupt stacks must be in lowmem, we get that for free on ppc32 231 * as the memblock is limited to lowmem by default */ 232 for_each_possible_cpu(i) { 233 softirq_ctx[i] = (struct thread_info *) 234 __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE)); 235 hardirq_ctx[i] = (struct thread_info *) 236 __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE)); 237 } 238 } 239 240 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x) 241 static void __init exc_lvl_early_init(void) 242 { 243 unsigned int i, hw_cpu; 244 245 /* interrupt stacks must be in lowmem, we get that for free on ppc32 246 * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */ 247 for_each_possible_cpu(i) { 248 #ifdef CONFIG_SMP 249 hw_cpu = get_hard_smp_processor_id(i); 250 #else 251 hw_cpu = 0; 252 #endif 253 254 critirq_ctx[hw_cpu] = (struct thread_info *) 255 __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE)); 256 #ifdef CONFIG_BOOKE 257 dbgirq_ctx[hw_cpu] = (struct thread_info *) 258 __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE)); 259 mcheckirq_ctx[hw_cpu] = (struct thread_info *) 260 __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE)); 261 #endif 262 } 263 } 264 #else 265 #define exc_lvl_early_init() 266 #endif 267 268 /* Warning, IO base is not yet inited */ 269 void __init setup_arch(char **cmdline_p) 270 { 271 *cmdline_p = boot_command_line; 272 273 /* so udelay does something sensible, assume <= 1000 bogomips */ 274 loops_per_jiffy = 500000000 / HZ; 275 276 unflatten_device_tree(); 277 check_for_initrd(); 278 279 if (ppc_md.init_early) 280 ppc_md.init_early(); 281 282 find_legacy_serial_ports(); 283 284 smp_setup_cpu_maps(); 285 286 /* Register early console */ 287 register_early_udbg_console(); 288 289 xmon_setup(); 290 291 /* 292 * Set cache line size based on type of cpu as a default. 293 * Systems with OF can look in the properties on the cpu node(s) 294 * for a possibly more accurate value. 295 */ 296 dcache_bsize = cur_cpu_spec->dcache_bsize; 297 icache_bsize = cur_cpu_spec->icache_bsize; 298 ucache_bsize = 0; 299 if (cpu_has_feature(CPU_FTR_UNIFIED_ID_CACHE)) 300 ucache_bsize = icache_bsize = dcache_bsize; 301 302 if (ppc_md.panic) 303 setup_panic(); 304 305 init_mm.start_code = (unsigned long)_stext; 306 init_mm.end_code = (unsigned long) _etext; 307 init_mm.end_data = (unsigned long) _edata; 308 init_mm.brk = klimit; 309 310 exc_lvl_early_init(); 311 312 irqstack_early_init(); 313 314 /* set up the bootmem stuff with available memory */ 315 do_init_bootmem(); 316 if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab); 317 318 #ifdef CONFIG_DUMMY_CONSOLE 319 conswitchp = &dummy_con; 320 #endif 321 322 if (ppc_md.setup_arch) 323 ppc_md.setup_arch(); 324 if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab); 325 326 paging_init(); 327 328 /* Initialize the MMU context management stuff */ 329 mmu_context_init(); 330 } 331