1 /* 2 * Helper routines to scan the device tree for PCI devices and busses 3 * 4 * Migrated out of PowerPC architecture pci_64.c file by Grant Likely 5 * <grant.likely@secretlab.ca> so that these routines are available for 6 * 32 bit also. 7 * 8 * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM 9 * Rework, based on alpha PCI code. 10 * Copyright (c) 2009 Secret Lab Technologies Ltd. 11 * 12 * This program is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License 14 * version 2 as published by the Free Software Foundation. 15 */ 16 17 #include <linux/pci.h> 18 #include <linux/export.h> 19 #include <asm/pci-bridge.h> 20 #include <asm/prom.h> 21 22 /** 23 * get_int_prop - Decode a u32 from a device tree property 24 */ 25 static u32 get_int_prop(struct device_node *np, const char *name, u32 def) 26 { 27 const u32 *prop; 28 int len; 29 30 prop = of_get_property(np, name, &len); 31 if (prop && len >= 4) 32 return *prop; 33 return def; 34 } 35 36 /** 37 * pci_parse_of_flags - Parse the flags cell of a device tree PCI address 38 * @addr0: value of 1st cell of a device tree PCI address. 39 * @bridge: Set this flag if the address is from a bridge 'ranges' property 40 */ 41 unsigned int pci_parse_of_flags(u32 addr0, int bridge) 42 { 43 unsigned int flags = 0; 44 45 if (addr0 & 0x02000000) { 46 flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY; 47 flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64; 48 flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M; 49 if (addr0 & 0x40000000) 50 flags |= IORESOURCE_PREFETCH 51 | PCI_BASE_ADDRESS_MEM_PREFETCH; 52 /* Note: We don't know whether the ROM has been left enabled 53 * by the firmware or not. We mark it as disabled (ie, we do 54 * not set the IORESOURCE_ROM_ENABLE flag) for now rather than 55 * do a config space read, it will be force-enabled if needed 56 */ 57 if (!bridge && (addr0 & 0xff) == 0x30) 58 flags |= IORESOURCE_READONLY; 59 } else if (addr0 & 0x01000000) 60 flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; 61 if (flags) 62 flags |= IORESOURCE_SIZEALIGN; 63 return flags; 64 } 65 66 /** 67 * of_pci_parse_addrs - Parse PCI addresses assigned in the device tree node 68 * @node: device tree node for the PCI device 69 * @dev: pci_dev structure for the device 70 * 71 * This function parses the 'assigned-addresses' property of a PCI devices' 72 * device tree node and writes them into the associated pci_dev structure. 73 */ 74 static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev) 75 { 76 u64 base, size; 77 unsigned int flags; 78 struct resource *res; 79 const u32 *addrs; 80 u32 i; 81 int proplen; 82 83 addrs = of_get_property(node, "assigned-addresses", &proplen); 84 if (!addrs) 85 return; 86 pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs); 87 for (; proplen >= 20; proplen -= 20, addrs += 5) { 88 flags = pci_parse_of_flags(addrs[0], 0); 89 if (!flags) 90 continue; 91 base = of_read_number(&addrs[1], 2); 92 size = of_read_number(&addrs[3], 2); 93 if (!size) 94 continue; 95 i = addrs[0] & 0xff; 96 pr_debug(" base: %llx, size: %llx, i: %x\n", 97 (unsigned long long)base, 98 (unsigned long long)size, i); 99 100 if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { 101 res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; 102 } else if (i == dev->rom_base_reg) { 103 res = &dev->resource[PCI_ROM_RESOURCE]; 104 flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE; 105 } else { 106 printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); 107 continue; 108 } 109 res->start = base; 110 res->end = base + size - 1; 111 res->flags = flags; 112 res->name = pci_name(dev); 113 } 114 } 115 116 /** 117 * of_create_pci_dev - Given a device tree node on a pci bus, create a pci_dev 118 * @node: device tree node pointer 119 * @bus: bus the device is sitting on 120 * @devfn: PCI function number, extracted from device tree by caller. 121 */ 122 struct pci_dev *of_create_pci_dev(struct device_node *node, 123 struct pci_bus *bus, int devfn) 124 { 125 struct pci_dev *dev; 126 const char *type; 127 struct pci_slot *slot; 128 129 dev = alloc_pci_dev(); 130 if (!dev) 131 return NULL; 132 type = of_get_property(node, "device_type", NULL); 133 if (type == NULL) 134 type = ""; 135 136 pr_debug(" create device, devfn: %x, type: %s\n", devfn, type); 137 138 dev->bus = bus; 139 dev->dev.of_node = of_node_get(node); 140 dev->dev.parent = bus->bridge; 141 dev->dev.bus = &pci_bus_type; 142 dev->devfn = devfn; 143 dev->multifunction = 0; /* maybe a lie? */ 144 dev->needs_freset = 0; /* pcie fundamental reset required */ 145 set_pcie_port_type(dev); 146 147 list_for_each_entry(slot, &dev->bus->slots, list) 148 if (PCI_SLOT(dev->devfn) == slot->number) 149 dev->slot = slot; 150 151 dev->vendor = get_int_prop(node, "vendor-id", 0xffff); 152 dev->device = get_int_prop(node, "device-id", 0xffff); 153 dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0); 154 dev->subsystem_device = get_int_prop(node, "subsystem-id", 0); 155 156 dev->cfg_size = pci_cfg_space_size(dev); 157 158 dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus), 159 dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); 160 dev->class = get_int_prop(node, "class-code", 0); 161 dev->revision = get_int_prop(node, "revision-id", 0); 162 163 pr_debug(" class: 0x%x\n", dev->class); 164 pr_debug(" revision: 0x%x\n", dev->revision); 165 166 dev->current_state = 4; /* unknown power state */ 167 dev->error_state = pci_channel_io_normal; 168 dev->dma_mask = 0xffffffff; 169 170 /* Early fixups, before probing the BARs */ 171 pci_fixup_device(pci_fixup_early, dev); 172 173 if (!strcmp(type, "pci") || !strcmp(type, "pciex")) { 174 /* a PCI-PCI bridge */ 175 dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; 176 dev->rom_base_reg = PCI_ROM_ADDRESS1; 177 set_pcie_hotplug_bridge(dev); 178 } else if (!strcmp(type, "cardbus")) { 179 dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; 180 } else { 181 dev->hdr_type = PCI_HEADER_TYPE_NORMAL; 182 dev->rom_base_reg = PCI_ROM_ADDRESS; 183 /* Maybe do a default OF mapping here */ 184 dev->irq = NO_IRQ; 185 } 186 187 of_pci_parse_addrs(node, dev); 188 189 pr_debug(" adding to system ...\n"); 190 191 pci_device_add(dev, bus); 192 193 return dev; 194 } 195 EXPORT_SYMBOL(of_create_pci_dev); 196 197 /** 198 * of_scan_pci_bridge - Set up a PCI bridge and scan for child nodes 199 * @node: device tree node of bridge 200 * @dev: pci_dev structure for the bridge 201 * 202 * of_scan_bus() calls this routine for each PCI bridge that it finds, and 203 * this routine in turn call of_scan_bus() recusively to scan for more child 204 * devices. 205 */ 206 void __devinit of_scan_pci_bridge(struct pci_dev *dev) 207 { 208 struct device_node *node = dev->dev.of_node; 209 struct pci_bus *bus; 210 const u32 *busrange, *ranges; 211 int len, i, mode; 212 struct resource *res; 213 unsigned int flags; 214 u64 size; 215 216 pr_debug("of_scan_pci_bridge(%s)\n", node->full_name); 217 218 /* parse bus-range property */ 219 busrange = of_get_property(node, "bus-range", &len); 220 if (busrange == NULL || len != 8) { 221 printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n", 222 node->full_name); 223 return; 224 } 225 ranges = of_get_property(node, "ranges", &len); 226 if (ranges == NULL) { 227 printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n", 228 node->full_name); 229 return; 230 } 231 232 bus = pci_add_new_bus(dev->bus, dev, busrange[0]); 233 if (!bus) { 234 printk(KERN_ERR "Failed to create pci bus for %s\n", 235 node->full_name); 236 return; 237 } 238 239 bus->primary = dev->bus->number; 240 bus->subordinate = busrange[1]; 241 bus->bridge_ctl = 0; 242 243 /* parse ranges property */ 244 /* PCI #address-cells == 3 and #size-cells == 2 always */ 245 res = &dev->resource[PCI_BRIDGE_RESOURCES]; 246 for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) { 247 res->flags = 0; 248 bus->resource[i] = res; 249 ++res; 250 } 251 i = 1; 252 for (; len >= 32; len -= 32, ranges += 8) { 253 flags = pci_parse_of_flags(ranges[0], 1); 254 size = of_read_number(&ranges[6], 2); 255 if (flags == 0 || size == 0) 256 continue; 257 if (flags & IORESOURCE_IO) { 258 res = bus->resource[0]; 259 if (res->flags) { 260 printk(KERN_ERR "PCI: ignoring extra I/O range" 261 " for bridge %s\n", node->full_name); 262 continue; 263 } 264 } else { 265 if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) { 266 printk(KERN_ERR "PCI: too many memory ranges" 267 " for bridge %s\n", node->full_name); 268 continue; 269 } 270 res = bus->resource[i]; 271 ++i; 272 } 273 res->start = of_read_number(&ranges[1], 2); 274 res->end = res->start + size - 1; 275 res->flags = flags; 276 } 277 sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), 278 bus->number); 279 pr_debug(" bus name: %s\n", bus->name); 280 281 mode = PCI_PROBE_NORMAL; 282 if (ppc_md.pci_probe_mode) 283 mode = ppc_md.pci_probe_mode(bus); 284 pr_debug(" probe mode: %d\n", mode); 285 286 if (mode == PCI_PROBE_DEVTREE) 287 of_scan_bus(node, bus); 288 else if (mode == PCI_PROBE_NORMAL) 289 pci_scan_child_bus(bus); 290 } 291 EXPORT_SYMBOL(of_scan_pci_bridge); 292 293 /** 294 * __of_scan_bus - given a PCI bus node, setup bus and scan for child devices 295 * @node: device tree node for the PCI bus 296 * @bus: pci_bus structure for the PCI bus 297 * @rescan_existing: Flag indicating bus has already been set up 298 */ 299 static void __devinit __of_scan_bus(struct device_node *node, 300 struct pci_bus *bus, int rescan_existing) 301 { 302 struct device_node *child; 303 const u32 *reg; 304 int reglen, devfn; 305 struct pci_dev *dev; 306 307 pr_debug("of_scan_bus(%s) bus no %d...\n", 308 node->full_name, bus->number); 309 310 /* Scan direct children */ 311 for_each_child_of_node(node, child) { 312 pr_debug(" * %s\n", child->full_name); 313 if (!of_device_is_available(child)) 314 continue; 315 reg = of_get_property(child, "reg", ®len); 316 if (reg == NULL || reglen < 20) 317 continue; 318 devfn = (reg[0] >> 8) & 0xff; 319 320 /* create a new pci_dev for this device */ 321 dev = of_create_pci_dev(child, bus, devfn); 322 if (!dev) 323 continue; 324 pr_debug(" dev header type: %x\n", dev->hdr_type); 325 } 326 327 /* Apply all fixups necessary. We don't fixup the bus "self" 328 * for an existing bridge that is being rescanned 329 */ 330 if (!rescan_existing) 331 pcibios_setup_bus_self(bus); 332 pcibios_setup_bus_devices(bus); 333 334 /* Now scan child busses */ 335 list_for_each_entry(dev, &bus->devices, bus_list) { 336 if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || 337 dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) { 338 of_scan_pci_bridge(dev); 339 } 340 } 341 } 342 343 /** 344 * of_scan_bus - given a PCI bus node, setup bus and scan for child devices 345 * @node: device tree node for the PCI bus 346 * @bus: pci_bus structure for the PCI bus 347 */ 348 void __devinit of_scan_bus(struct device_node *node, 349 struct pci_bus *bus) 350 { 351 __of_scan_bus(node, bus, 0); 352 } 353 EXPORT_SYMBOL_GPL(of_scan_bus); 354 355 /** 356 * of_rescan_bus - given a PCI bus node, scan for child devices 357 * @node: device tree node for the PCI bus 358 * @bus: pci_bus structure for the PCI bus 359 * 360 * Same as of_scan_bus, but for a pci_bus structure that has already been 361 * setup. 362 */ 363 void __devinit of_rescan_bus(struct device_node *node, 364 struct pci_bus *bus) 365 { 366 __of_scan_bus(node, bus, 1); 367 } 368 EXPORT_SYMBOL_GPL(of_rescan_bus); 369 370