1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Contains common pci routines for ALL ppc platform 4 * (based on pci_32.c and pci_64.c) 5 * 6 * Port for PPC64 David Engebretsen, IBM Corp. 7 * Contains common pci routines for ppc64 platform, pSeries and iSeries brands. 8 * 9 * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM 10 * Rework, based on alpha PCI code. 11 * 12 * Common pmac/prep/chrp pci routines. -- Cort 13 */ 14 15 #include <linux/kernel.h> 16 #include <linux/pci.h> 17 #include <linux/string.h> 18 #include <linux/init.h> 19 #include <linux/delay.h> 20 #include <linux/export.h> 21 #include <linux/of_address.h> 22 #include <linux/of_pci.h> 23 #include <linux/mm.h> 24 #include <linux/shmem_fs.h> 25 #include <linux/list.h> 26 #include <linux/syscalls.h> 27 #include <linux/irq.h> 28 #include <linux/vmalloc.h> 29 #include <linux/slab.h> 30 #include <linux/vgaarb.h> 31 #include <linux/numa.h> 32 #include <linux/msi.h> 33 34 #include <asm/processor.h> 35 #include <asm/io.h> 36 #include <asm/prom.h> 37 #include <asm/pci-bridge.h> 38 #include <asm/byteorder.h> 39 #include <asm/machdep.h> 40 #include <asm/ppc-pci.h> 41 #include <asm/eeh.h> 42 43 #include "../../../drivers/pci/pci.h" 44 45 /* hose_spinlock protects accesses to the the phb_bitmap. */ 46 static DEFINE_SPINLOCK(hose_spinlock); 47 LIST_HEAD(hose_list); 48 49 /* For dynamic PHB numbering on get_phb_number(): max number of PHBs. */ 50 #define MAX_PHBS 0x10000 51 52 /* 53 * For dynamic PHB numbering: used/free PHBs tracking bitmap. 54 * Accesses to this bitmap should be protected by hose_spinlock. 55 */ 56 static DECLARE_BITMAP(phb_bitmap, MAX_PHBS); 57 58 /* ISA Memory physical address */ 59 resource_size_t isa_mem_base; 60 EXPORT_SYMBOL(isa_mem_base); 61 62 63 static const struct dma_map_ops *pci_dma_ops; 64 65 void __init set_pci_dma_ops(const struct dma_map_ops *dma_ops) 66 { 67 pci_dma_ops = dma_ops; 68 } 69 70 /* 71 * This function should run under locking protection, specifically 72 * hose_spinlock. 73 */ 74 static int get_phb_number(struct device_node *dn) 75 { 76 int ret, phb_id = -1; 77 u32 prop_32; 78 u64 prop; 79 80 /* 81 * Try fixed PHB numbering first, by checking archs and reading 82 * the respective device-tree properties. Firstly, try powernv by 83 * reading "ibm,opal-phbid", only present in OPAL environment. 84 */ 85 ret = of_property_read_u64(dn, "ibm,opal-phbid", &prop); 86 if (ret) { 87 ret = of_property_read_u32_index(dn, "reg", 1, &prop_32); 88 prop = prop_32; 89 } 90 91 if (!ret) 92 phb_id = (int)(prop & (MAX_PHBS - 1)); 93 94 /* We need to be sure to not use the same PHB number twice. */ 95 if ((phb_id >= 0) && !test_and_set_bit(phb_id, phb_bitmap)) 96 return phb_id; 97 98 /* 99 * If not pseries nor powernv, or if fixed PHB numbering tried to add 100 * the same PHB number twice, then fallback to dynamic PHB numbering. 101 */ 102 phb_id = find_first_zero_bit(phb_bitmap, MAX_PHBS); 103 BUG_ON(phb_id >= MAX_PHBS); 104 set_bit(phb_id, phb_bitmap); 105 106 return phb_id; 107 } 108 109 struct pci_controller *pcibios_alloc_controller(struct device_node *dev) 110 { 111 struct pci_controller *phb; 112 113 phb = zalloc_maybe_bootmem(sizeof(struct pci_controller), GFP_KERNEL); 114 if (phb == NULL) 115 return NULL; 116 spin_lock(&hose_spinlock); 117 phb->global_number = get_phb_number(dev); 118 list_add_tail(&phb->list_node, &hose_list); 119 spin_unlock(&hose_spinlock); 120 phb->dn = dev; 121 phb->is_dynamic = slab_is_available(); 122 #ifdef CONFIG_PPC64 123 if (dev) { 124 int nid = of_node_to_nid(dev); 125 126 if (nid < 0 || !node_online(nid)) 127 nid = NUMA_NO_NODE; 128 129 PHB_SET_NODE(phb, nid); 130 } 131 #endif 132 return phb; 133 } 134 EXPORT_SYMBOL_GPL(pcibios_alloc_controller); 135 136 void pcibios_free_controller(struct pci_controller *phb) 137 { 138 spin_lock(&hose_spinlock); 139 140 /* Clear bit of phb_bitmap to allow reuse of this PHB number. */ 141 if (phb->global_number < MAX_PHBS) 142 clear_bit(phb->global_number, phb_bitmap); 143 144 list_del(&phb->list_node); 145 spin_unlock(&hose_spinlock); 146 147 if (phb->is_dynamic) 148 kfree(phb); 149 } 150 EXPORT_SYMBOL_GPL(pcibios_free_controller); 151 152 /* 153 * This function is used to call pcibios_free_controller() 154 * in a deferred manner: a callback from the PCI subsystem. 155 * 156 * _*DO NOT*_ call pcibios_free_controller() explicitly if 157 * this is used (or it may access an invalid *phb pointer). 158 * 159 * The callback occurs when all references to the root bus 160 * are dropped (e.g., child buses/devices and their users). 161 * 162 * It's called as .release_fn() of 'struct pci_host_bridge' 163 * which is associated with the 'struct pci_controller.bus' 164 * (root bus) - it expects .release_data to hold a pointer 165 * to 'struct pci_controller'. 166 * 167 * In order to use it, register .release_fn()/release_data 168 * like this: 169 * 170 * pci_set_host_bridge_release(bridge, 171 * pcibios_free_controller_deferred 172 * (void *) phb); 173 * 174 * e.g. in the pcibios_root_bridge_prepare() callback from 175 * pci_create_root_bus(). 176 */ 177 void pcibios_free_controller_deferred(struct pci_host_bridge *bridge) 178 { 179 struct pci_controller *phb = (struct pci_controller *) 180 bridge->release_data; 181 182 pr_debug("domain %d, dynamic %d\n", phb->global_number, phb->is_dynamic); 183 184 pcibios_free_controller(phb); 185 } 186 EXPORT_SYMBOL_GPL(pcibios_free_controller_deferred); 187 188 /* 189 * The function is used to return the minimal alignment 190 * for memory or I/O windows of the associated P2P bridge. 191 * By default, 4KiB alignment for I/O windows and 1MiB for 192 * memory windows. 193 */ 194 resource_size_t pcibios_window_alignment(struct pci_bus *bus, 195 unsigned long type) 196 { 197 struct pci_controller *phb = pci_bus_to_host(bus); 198 199 if (phb->controller_ops.window_alignment) 200 return phb->controller_ops.window_alignment(bus, type); 201 202 /* 203 * PCI core will figure out the default 204 * alignment: 4KiB for I/O and 1MiB for 205 * memory window. 206 */ 207 return 1; 208 } 209 210 void pcibios_setup_bridge(struct pci_bus *bus, unsigned long type) 211 { 212 struct pci_controller *hose = pci_bus_to_host(bus); 213 214 if (hose->controller_ops.setup_bridge) 215 hose->controller_ops.setup_bridge(bus, type); 216 } 217 218 void pcibios_reset_secondary_bus(struct pci_dev *dev) 219 { 220 struct pci_controller *phb = pci_bus_to_host(dev->bus); 221 222 if (phb->controller_ops.reset_secondary_bus) { 223 phb->controller_ops.reset_secondary_bus(dev); 224 return; 225 } 226 227 pci_reset_secondary_bus(dev); 228 } 229 230 resource_size_t pcibios_default_alignment(void) 231 { 232 if (ppc_md.pcibios_default_alignment) 233 return ppc_md.pcibios_default_alignment(); 234 235 return 0; 236 } 237 238 #ifdef CONFIG_PCI_IOV 239 resource_size_t pcibios_iov_resource_alignment(struct pci_dev *pdev, int resno) 240 { 241 if (ppc_md.pcibios_iov_resource_alignment) 242 return ppc_md.pcibios_iov_resource_alignment(pdev, resno); 243 244 return pci_iov_resource_size(pdev, resno); 245 } 246 247 int pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs) 248 { 249 if (ppc_md.pcibios_sriov_enable) 250 return ppc_md.pcibios_sriov_enable(pdev, num_vfs); 251 252 return 0; 253 } 254 255 int pcibios_sriov_disable(struct pci_dev *pdev) 256 { 257 if (ppc_md.pcibios_sriov_disable) 258 return ppc_md.pcibios_sriov_disable(pdev); 259 260 return 0; 261 } 262 263 #endif /* CONFIG_PCI_IOV */ 264 265 static resource_size_t pcibios_io_size(const struct pci_controller *hose) 266 { 267 #ifdef CONFIG_PPC64 268 return hose->pci_io_size; 269 #else 270 return resource_size(&hose->io_resource); 271 #endif 272 } 273 274 int pcibios_vaddr_is_ioport(void __iomem *address) 275 { 276 int ret = 0; 277 struct pci_controller *hose; 278 resource_size_t size; 279 280 spin_lock(&hose_spinlock); 281 list_for_each_entry(hose, &hose_list, list_node) { 282 size = pcibios_io_size(hose); 283 if (address >= hose->io_base_virt && 284 address < (hose->io_base_virt + size)) { 285 ret = 1; 286 break; 287 } 288 } 289 spin_unlock(&hose_spinlock); 290 return ret; 291 } 292 293 unsigned long pci_address_to_pio(phys_addr_t address) 294 { 295 struct pci_controller *hose; 296 resource_size_t size; 297 unsigned long ret = ~0; 298 299 spin_lock(&hose_spinlock); 300 list_for_each_entry(hose, &hose_list, list_node) { 301 size = pcibios_io_size(hose); 302 if (address >= hose->io_base_phys && 303 address < (hose->io_base_phys + size)) { 304 unsigned long base = 305 (unsigned long)hose->io_base_virt - _IO_BASE; 306 ret = base + (address - hose->io_base_phys); 307 break; 308 } 309 } 310 spin_unlock(&hose_spinlock); 311 312 return ret; 313 } 314 EXPORT_SYMBOL_GPL(pci_address_to_pio); 315 316 /* 317 * Return the domain number for this bus. 318 */ 319 int pci_domain_nr(struct pci_bus *bus) 320 { 321 struct pci_controller *hose = pci_bus_to_host(bus); 322 323 return hose->global_number; 324 } 325 EXPORT_SYMBOL(pci_domain_nr); 326 327 /* This routine is meant to be used early during boot, when the 328 * PCI bus numbers have not yet been assigned, and you need to 329 * issue PCI config cycles to an OF device. 330 * It could also be used to "fix" RTAS config cycles if you want 331 * to set pci_assign_all_buses to 1 and still use RTAS for PCI 332 * config cycles. 333 */ 334 struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node) 335 { 336 while(node) { 337 struct pci_controller *hose, *tmp; 338 list_for_each_entry_safe(hose, tmp, &hose_list, list_node) 339 if (hose->dn == node) 340 return hose; 341 node = node->parent; 342 } 343 return NULL; 344 } 345 346 struct pci_controller *pci_find_controller_for_domain(int domain_nr) 347 { 348 struct pci_controller *hose; 349 350 list_for_each_entry(hose, &hose_list, list_node) 351 if (hose->global_number == domain_nr) 352 return hose; 353 354 return NULL; 355 } 356 357 struct pci_intx_virq { 358 int virq; 359 struct kref kref; 360 struct list_head list_node; 361 }; 362 363 static LIST_HEAD(intx_list); 364 static DEFINE_MUTEX(intx_mutex); 365 366 static void ppc_pci_intx_release(struct kref *kref) 367 { 368 struct pci_intx_virq *vi = container_of(kref, struct pci_intx_virq, kref); 369 370 list_del(&vi->list_node); 371 irq_dispose_mapping(vi->virq); 372 kfree(vi); 373 } 374 375 static int ppc_pci_unmap_irq_line(struct notifier_block *nb, 376 unsigned long action, void *data) 377 { 378 struct pci_dev *pdev = to_pci_dev(data); 379 380 if (action == BUS_NOTIFY_DEL_DEVICE) { 381 struct pci_intx_virq *vi; 382 383 mutex_lock(&intx_mutex); 384 list_for_each_entry(vi, &intx_list, list_node) { 385 if (vi->virq == pdev->irq) { 386 kref_put(&vi->kref, ppc_pci_intx_release); 387 break; 388 } 389 } 390 mutex_unlock(&intx_mutex); 391 } 392 393 return NOTIFY_DONE; 394 } 395 396 static struct notifier_block ppc_pci_unmap_irq_notifier = { 397 .notifier_call = ppc_pci_unmap_irq_line, 398 }; 399 400 static int ppc_pci_register_irq_notifier(void) 401 { 402 return bus_register_notifier(&pci_bus_type, &ppc_pci_unmap_irq_notifier); 403 } 404 arch_initcall(ppc_pci_register_irq_notifier); 405 406 /* 407 * Reads the interrupt pin to determine if interrupt is use by card. 408 * If the interrupt is used, then gets the interrupt line from the 409 * openfirmware and sets it in the pci_dev and pci_config line. 410 */ 411 static int pci_read_irq_line(struct pci_dev *pci_dev) 412 { 413 int virq; 414 struct pci_intx_virq *vi, *vitmp; 415 416 /* Preallocate vi as rewind is complex if this fails after mapping */ 417 vi = kzalloc(sizeof(struct pci_intx_virq), GFP_KERNEL); 418 if (!vi) 419 return -1; 420 421 pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev)); 422 423 /* Try to get a mapping from the device-tree */ 424 virq = of_irq_parse_and_map_pci(pci_dev, 0, 0); 425 if (virq <= 0) { 426 u8 line, pin; 427 428 /* If that fails, lets fallback to what is in the config 429 * space and map that through the default controller. We 430 * also set the type to level low since that's what PCI 431 * interrupts are. If your platform does differently, then 432 * either provide a proper interrupt tree or don't use this 433 * function. 434 */ 435 if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin)) 436 goto error_exit; 437 if (pin == 0) 438 goto error_exit; 439 if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) || 440 line == 0xff || line == 0) { 441 goto error_exit; 442 } 443 pr_debug(" No map ! Using line %d (pin %d) from PCI config\n", 444 line, pin); 445 446 virq = irq_create_mapping(NULL, line); 447 if (virq) 448 irq_set_irq_type(virq, IRQ_TYPE_LEVEL_LOW); 449 } 450 451 if (!virq) { 452 pr_debug(" Failed to map !\n"); 453 goto error_exit; 454 } 455 456 pr_debug(" Mapped to linux irq %d\n", virq); 457 458 pci_dev->irq = virq; 459 460 mutex_lock(&intx_mutex); 461 list_for_each_entry(vitmp, &intx_list, list_node) { 462 if (vitmp->virq == virq) { 463 kref_get(&vitmp->kref); 464 kfree(vi); 465 vi = NULL; 466 break; 467 } 468 } 469 if (vi) { 470 vi->virq = virq; 471 kref_init(&vi->kref); 472 list_add_tail(&vi->list_node, &intx_list); 473 } 474 mutex_unlock(&intx_mutex); 475 476 return 0; 477 error_exit: 478 kfree(vi); 479 return -1; 480 } 481 482 /* 483 * Platform support for /proc/bus/pci/X/Y mmap()s. 484 * -- paulus. 485 */ 486 int pci_iobar_pfn(struct pci_dev *pdev, int bar, struct vm_area_struct *vma) 487 { 488 struct pci_controller *hose = pci_bus_to_host(pdev->bus); 489 resource_size_t ioaddr = pci_resource_start(pdev, bar); 490 491 if (!hose) 492 return -EINVAL; 493 494 /* Convert to an offset within this PCI controller */ 495 ioaddr -= (unsigned long)hose->io_base_virt - _IO_BASE; 496 497 vma->vm_pgoff += (ioaddr + hose->io_base_phys) >> PAGE_SHIFT; 498 return 0; 499 } 500 501 /* 502 * This one is used by /dev/mem and fbdev who have no clue about the 503 * PCI device, it tries to find the PCI device first and calls the 504 * above routine 505 */ 506 pgprot_t pci_phys_mem_access_prot(struct file *file, 507 unsigned long pfn, 508 unsigned long size, 509 pgprot_t prot) 510 { 511 struct pci_dev *pdev = NULL; 512 struct resource *found = NULL; 513 resource_size_t offset = ((resource_size_t)pfn) << PAGE_SHIFT; 514 int i; 515 516 if (page_is_ram(pfn)) 517 return prot; 518 519 prot = pgprot_noncached(prot); 520 for_each_pci_dev(pdev) { 521 for (i = 0; i <= PCI_ROM_RESOURCE; i++) { 522 struct resource *rp = &pdev->resource[i]; 523 int flags = rp->flags; 524 525 /* Active and same type? */ 526 if ((flags & IORESOURCE_MEM) == 0) 527 continue; 528 /* In the range of this resource? */ 529 if (offset < (rp->start & PAGE_MASK) || 530 offset > rp->end) 531 continue; 532 found = rp; 533 break; 534 } 535 if (found) 536 break; 537 } 538 if (found) { 539 if (found->flags & IORESOURCE_PREFETCH) 540 prot = pgprot_noncached_wc(prot); 541 pci_dev_put(pdev); 542 } 543 544 pr_debug("PCI: Non-PCI map for %llx, prot: %lx\n", 545 (unsigned long long)offset, pgprot_val(prot)); 546 547 return prot; 548 } 549 550 /* This provides legacy IO read access on a bus */ 551 int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, size_t size) 552 { 553 unsigned long offset; 554 struct pci_controller *hose = pci_bus_to_host(bus); 555 struct resource *rp = &hose->io_resource; 556 void __iomem *addr; 557 558 /* Check if port can be supported by that bus. We only check 559 * the ranges of the PHB though, not the bus itself as the rules 560 * for forwarding legacy cycles down bridges are not our problem 561 * here. So if the host bridge supports it, we do it. 562 */ 563 offset = (unsigned long)hose->io_base_virt - _IO_BASE; 564 offset += port; 565 566 if (!(rp->flags & IORESOURCE_IO)) 567 return -ENXIO; 568 if (offset < rp->start || (offset + size) > rp->end) 569 return -ENXIO; 570 addr = hose->io_base_virt + port; 571 572 switch(size) { 573 case 1: 574 *((u8 *)val) = in_8(addr); 575 return 1; 576 case 2: 577 if (port & 1) 578 return -EINVAL; 579 *((u16 *)val) = in_le16(addr); 580 return 2; 581 case 4: 582 if (port & 3) 583 return -EINVAL; 584 *((u32 *)val) = in_le32(addr); 585 return 4; 586 } 587 return -EINVAL; 588 } 589 590 /* This provides legacy IO write access on a bus */ 591 int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, size_t size) 592 { 593 unsigned long offset; 594 struct pci_controller *hose = pci_bus_to_host(bus); 595 struct resource *rp = &hose->io_resource; 596 void __iomem *addr; 597 598 /* Check if port can be supported by that bus. We only check 599 * the ranges of the PHB though, not the bus itself as the rules 600 * for forwarding legacy cycles down bridges are not our problem 601 * here. So if the host bridge supports it, we do it. 602 */ 603 offset = (unsigned long)hose->io_base_virt - _IO_BASE; 604 offset += port; 605 606 if (!(rp->flags & IORESOURCE_IO)) 607 return -ENXIO; 608 if (offset < rp->start || (offset + size) > rp->end) 609 return -ENXIO; 610 addr = hose->io_base_virt + port; 611 612 /* WARNING: The generic code is idiotic. It gets passed a pointer 613 * to what can be a 1, 2 or 4 byte quantity and always reads that 614 * as a u32, which means that we have to correct the location of 615 * the data read within those 32 bits for size 1 and 2 616 */ 617 switch(size) { 618 case 1: 619 out_8(addr, val >> 24); 620 return 1; 621 case 2: 622 if (port & 1) 623 return -EINVAL; 624 out_le16(addr, val >> 16); 625 return 2; 626 case 4: 627 if (port & 3) 628 return -EINVAL; 629 out_le32(addr, val); 630 return 4; 631 } 632 return -EINVAL; 633 } 634 635 /* This provides legacy IO or memory mmap access on a bus */ 636 int pci_mmap_legacy_page_range(struct pci_bus *bus, 637 struct vm_area_struct *vma, 638 enum pci_mmap_state mmap_state) 639 { 640 struct pci_controller *hose = pci_bus_to_host(bus); 641 resource_size_t offset = 642 ((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT; 643 resource_size_t size = vma->vm_end - vma->vm_start; 644 struct resource *rp; 645 646 pr_debug("pci_mmap_legacy_page_range(%04x:%02x, %s @%llx..%llx)\n", 647 pci_domain_nr(bus), bus->number, 648 mmap_state == pci_mmap_mem ? "MEM" : "IO", 649 (unsigned long long)offset, 650 (unsigned long long)(offset + size - 1)); 651 652 if (mmap_state == pci_mmap_mem) { 653 /* Hack alert ! 654 * 655 * Because X is lame and can fail starting if it gets an error trying 656 * to mmap legacy_mem (instead of just moving on without legacy memory 657 * access) we fake it here by giving it anonymous memory, effectively 658 * behaving just like /dev/zero 659 */ 660 if ((offset + size) > hose->isa_mem_size) { 661 printk(KERN_DEBUG 662 "Process %s (pid:%d) mapped non-existing PCI legacy memory for 0%04x:%02x\n", 663 current->comm, current->pid, pci_domain_nr(bus), bus->number); 664 if (vma->vm_flags & VM_SHARED) 665 return shmem_zero_setup(vma); 666 return 0; 667 } 668 offset += hose->isa_mem_phys; 669 } else { 670 unsigned long io_offset = (unsigned long)hose->io_base_virt - _IO_BASE; 671 unsigned long roffset = offset + io_offset; 672 rp = &hose->io_resource; 673 if (!(rp->flags & IORESOURCE_IO)) 674 return -ENXIO; 675 if (roffset < rp->start || (roffset + size) > rp->end) 676 return -ENXIO; 677 offset += hose->io_base_phys; 678 } 679 pr_debug(" -> mapping phys %llx\n", (unsigned long long)offset); 680 681 vma->vm_pgoff = offset >> PAGE_SHIFT; 682 vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); 683 return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, 684 vma->vm_end - vma->vm_start, 685 vma->vm_page_prot); 686 } 687 688 void pci_resource_to_user(const struct pci_dev *dev, int bar, 689 const struct resource *rsrc, 690 resource_size_t *start, resource_size_t *end) 691 { 692 struct pci_bus_region region; 693 694 if (rsrc->flags & IORESOURCE_IO) { 695 pcibios_resource_to_bus(dev->bus, ®ion, 696 (struct resource *) rsrc); 697 *start = region.start; 698 *end = region.end; 699 return; 700 } 701 702 /* We pass a CPU physical address to userland for MMIO instead of a 703 * BAR value because X is lame and expects to be able to use that 704 * to pass to /dev/mem! 705 * 706 * That means we may have 64-bit values where some apps only expect 707 * 32 (like X itself since it thinks only Sparc has 64-bit MMIO). 708 */ 709 *start = rsrc->start; 710 *end = rsrc->end; 711 } 712 713 /** 714 * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree 715 * @hose: newly allocated pci_controller to be setup 716 * @dev: device node of the host bridge 717 * @primary: set if primary bus (32 bits only, soon to be deprecated) 718 * 719 * This function will parse the "ranges" property of a PCI host bridge device 720 * node and setup the resource mapping of a pci controller based on its 721 * content. 722 * 723 * Life would be boring if it wasn't for a few issues that we have to deal 724 * with here: 725 * 726 * - We can only cope with one IO space range and up to 3 Memory space 727 * ranges. However, some machines (thanks Apple !) tend to split their 728 * space into lots of small contiguous ranges. So we have to coalesce. 729 * 730 * - Some busses have IO space not starting at 0, which causes trouble with 731 * the way we do our IO resource renumbering. The code somewhat deals with 732 * it for 64 bits but I would expect problems on 32 bits. 733 * 734 * - Some 32 bits platforms such as 4xx can have physical space larger than 735 * 32 bits so we need to use 64 bits values for the parsing 736 */ 737 void pci_process_bridge_OF_ranges(struct pci_controller *hose, 738 struct device_node *dev, int primary) 739 { 740 int memno = 0; 741 struct resource *res; 742 struct of_pci_range range; 743 struct of_pci_range_parser parser; 744 745 printk(KERN_INFO "PCI host bridge %pOF %s ranges:\n", 746 dev, primary ? "(primary)" : ""); 747 748 /* Check for ranges property */ 749 if (of_pci_range_parser_init(&parser, dev)) 750 return; 751 752 /* Parse it */ 753 for_each_of_pci_range(&parser, &range) { 754 /* If we failed translation or got a zero-sized region 755 * (some FW try to feed us with non sensical zero sized regions 756 * such as power3 which look like some kind of attempt at exposing 757 * the VGA memory hole) 758 */ 759 if (range.cpu_addr == OF_BAD_ADDR || range.size == 0) 760 continue; 761 762 /* Act based on address space type */ 763 res = NULL; 764 switch (range.flags & IORESOURCE_TYPE_BITS) { 765 case IORESOURCE_IO: 766 printk(KERN_INFO 767 " IO 0x%016llx..0x%016llx -> 0x%016llx\n", 768 range.cpu_addr, range.cpu_addr + range.size - 1, 769 range.pci_addr); 770 771 /* We support only one IO range */ 772 if (hose->pci_io_size) { 773 printk(KERN_INFO 774 " \\--> Skipped (too many) !\n"); 775 continue; 776 } 777 #ifdef CONFIG_PPC32 778 /* On 32 bits, limit I/O space to 16MB */ 779 if (range.size > 0x01000000) 780 range.size = 0x01000000; 781 782 /* 32 bits needs to map IOs here */ 783 hose->io_base_virt = ioremap(range.cpu_addr, 784 range.size); 785 786 /* Expect trouble if pci_addr is not 0 */ 787 if (primary) 788 isa_io_base = 789 (unsigned long)hose->io_base_virt; 790 #endif /* CONFIG_PPC32 */ 791 /* pci_io_size and io_base_phys always represent IO 792 * space starting at 0 so we factor in pci_addr 793 */ 794 hose->pci_io_size = range.pci_addr + range.size; 795 hose->io_base_phys = range.cpu_addr - range.pci_addr; 796 797 /* Build resource */ 798 res = &hose->io_resource; 799 range.cpu_addr = range.pci_addr; 800 break; 801 case IORESOURCE_MEM: 802 printk(KERN_INFO 803 " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n", 804 range.cpu_addr, range.cpu_addr + range.size - 1, 805 range.pci_addr, 806 (range.flags & IORESOURCE_PREFETCH) ? 807 "Prefetch" : ""); 808 809 /* We support only 3 memory ranges */ 810 if (memno >= 3) { 811 printk(KERN_INFO 812 " \\--> Skipped (too many) !\n"); 813 continue; 814 } 815 /* Handles ISA memory hole space here */ 816 if (range.pci_addr == 0) { 817 if (primary || isa_mem_base == 0) 818 isa_mem_base = range.cpu_addr; 819 hose->isa_mem_phys = range.cpu_addr; 820 hose->isa_mem_size = range.size; 821 } 822 823 /* Build resource */ 824 hose->mem_offset[memno] = range.cpu_addr - 825 range.pci_addr; 826 res = &hose->mem_resources[memno++]; 827 break; 828 } 829 if (res != NULL) { 830 res->name = dev->full_name; 831 res->flags = range.flags; 832 res->start = range.cpu_addr; 833 res->end = range.cpu_addr + range.size - 1; 834 res->parent = res->child = res->sibling = NULL; 835 } 836 } 837 } 838 839 /* Decide whether to display the domain number in /proc */ 840 int pci_proc_domain(struct pci_bus *bus) 841 { 842 struct pci_controller *hose = pci_bus_to_host(bus); 843 844 if (!pci_has_flag(PCI_ENABLE_PROC_DOMAINS)) 845 return 0; 846 if (pci_has_flag(PCI_COMPAT_DOMAIN_0)) 847 return hose->global_number != 0; 848 return 1; 849 } 850 851 int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge) 852 { 853 if (ppc_md.pcibios_root_bridge_prepare) 854 return ppc_md.pcibios_root_bridge_prepare(bridge); 855 856 return 0; 857 } 858 859 /* This header fixup will do the resource fixup for all devices as they are 860 * probed, but not for bridge ranges 861 */ 862 static void pcibios_fixup_resources(struct pci_dev *dev) 863 { 864 struct pci_controller *hose = pci_bus_to_host(dev->bus); 865 int i; 866 867 if (!hose) { 868 printk(KERN_ERR "No host bridge for PCI dev %s !\n", 869 pci_name(dev)); 870 return; 871 } 872 873 if (dev->is_virtfn) 874 return; 875 876 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { 877 struct resource *res = dev->resource + i; 878 struct pci_bus_region reg; 879 if (!res->flags) 880 continue; 881 882 /* If we're going to re-assign everything, we mark all resources 883 * as unset (and 0-base them). In addition, we mark BARs starting 884 * at 0 as unset as well, except if PCI_PROBE_ONLY is also set 885 * since in that case, we don't want to re-assign anything 886 */ 887 pcibios_resource_to_bus(dev->bus, ®, res); 888 if (pci_has_flag(PCI_REASSIGN_ALL_RSRC) || 889 (reg.start == 0 && !pci_has_flag(PCI_PROBE_ONLY))) { 890 /* Only print message if not re-assigning */ 891 if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC)) 892 pr_debug("PCI:%s Resource %d %pR is unassigned\n", 893 pci_name(dev), i, res); 894 res->end -= res->start; 895 res->start = 0; 896 res->flags |= IORESOURCE_UNSET; 897 continue; 898 } 899 900 pr_debug("PCI:%s Resource %d %pR\n", pci_name(dev), i, res); 901 } 902 903 /* Call machine specific resource fixup */ 904 if (ppc_md.pcibios_fixup_resources) 905 ppc_md.pcibios_fixup_resources(dev); 906 } 907 DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources); 908 909 /* This function tries to figure out if a bridge resource has been initialized 910 * by the firmware or not. It doesn't have to be absolutely bullet proof, but 911 * things go more smoothly when it gets it right. It should covers cases such 912 * as Apple "closed" bridge resources and bare-metal pSeries unassigned bridges 913 */ 914 static int pcibios_uninitialized_bridge_resource(struct pci_bus *bus, 915 struct resource *res) 916 { 917 struct pci_controller *hose = pci_bus_to_host(bus); 918 struct pci_dev *dev = bus->self; 919 resource_size_t offset; 920 struct pci_bus_region region; 921 u16 command; 922 int i; 923 924 /* We don't do anything if PCI_PROBE_ONLY is set */ 925 if (pci_has_flag(PCI_PROBE_ONLY)) 926 return 0; 927 928 /* Job is a bit different between memory and IO */ 929 if (res->flags & IORESOURCE_MEM) { 930 pcibios_resource_to_bus(dev->bus, ®ion, res); 931 932 /* If the BAR is non-0 then it's probably been initialized */ 933 if (region.start != 0) 934 return 0; 935 936 /* The BAR is 0, let's check if memory decoding is enabled on 937 * the bridge. If not, we consider it unassigned 938 */ 939 pci_read_config_word(dev, PCI_COMMAND, &command); 940 if ((command & PCI_COMMAND_MEMORY) == 0) 941 return 1; 942 943 /* Memory decoding is enabled and the BAR is 0. If any of the bridge 944 * resources covers that starting address (0 then it's good enough for 945 * us for memory space) 946 */ 947 for (i = 0; i < 3; i++) { 948 if ((hose->mem_resources[i].flags & IORESOURCE_MEM) && 949 hose->mem_resources[i].start == hose->mem_offset[i]) 950 return 0; 951 } 952 953 /* Well, it starts at 0 and we know it will collide so we may as 954 * well consider it as unassigned. That covers the Apple case. 955 */ 956 return 1; 957 } else { 958 /* If the BAR is non-0, then we consider it assigned */ 959 offset = (unsigned long)hose->io_base_virt - _IO_BASE; 960 if (((res->start - offset) & 0xfffffffful) != 0) 961 return 0; 962 963 /* Here, we are a bit different than memory as typically IO space 964 * starting at low addresses -is- valid. What we do instead if that 965 * we consider as unassigned anything that doesn't have IO enabled 966 * in the PCI command register, and that's it. 967 */ 968 pci_read_config_word(dev, PCI_COMMAND, &command); 969 if (command & PCI_COMMAND_IO) 970 return 0; 971 972 /* It's starting at 0 and IO is disabled in the bridge, consider 973 * it unassigned 974 */ 975 return 1; 976 } 977 } 978 979 /* Fixup resources of a PCI<->PCI bridge */ 980 static void pcibios_fixup_bridge(struct pci_bus *bus) 981 { 982 struct resource *res; 983 int i; 984 985 struct pci_dev *dev = bus->self; 986 987 pci_bus_for_each_resource(bus, res, i) { 988 if (!res || !res->flags) 989 continue; 990 if (i >= 3 && bus->self->transparent) 991 continue; 992 993 /* If we're going to reassign everything, we can 994 * shrink the P2P resource to have size as being 995 * of 0 in order to save space. 996 */ 997 if (pci_has_flag(PCI_REASSIGN_ALL_RSRC)) { 998 res->flags |= IORESOURCE_UNSET; 999 res->start = 0; 1000 res->end = -1; 1001 continue; 1002 } 1003 1004 pr_debug("PCI:%s Bus rsrc %d %pR\n", pci_name(dev), i, res); 1005 1006 /* Try to detect uninitialized P2P bridge resources, 1007 * and clear them out so they get re-assigned later 1008 */ 1009 if (pcibios_uninitialized_bridge_resource(bus, res)) { 1010 res->flags = 0; 1011 pr_debug("PCI:%s (unassigned)\n", pci_name(dev)); 1012 } 1013 } 1014 } 1015 1016 void pcibios_setup_bus_self(struct pci_bus *bus) 1017 { 1018 struct pci_controller *phb; 1019 1020 /* Fix up the bus resources for P2P bridges */ 1021 if (bus->self != NULL) 1022 pcibios_fixup_bridge(bus); 1023 1024 /* Platform specific bus fixups. This is currently only used 1025 * by fsl_pci and I'm hoping to get rid of it at some point 1026 */ 1027 if (ppc_md.pcibios_fixup_bus) 1028 ppc_md.pcibios_fixup_bus(bus); 1029 1030 /* Setup bus DMA mappings */ 1031 phb = pci_bus_to_host(bus); 1032 if (phb->controller_ops.dma_bus_setup) 1033 phb->controller_ops.dma_bus_setup(bus); 1034 } 1035 1036 void pcibios_bus_add_device(struct pci_dev *dev) 1037 { 1038 struct pci_controller *phb; 1039 /* Fixup NUMA node as it may not be setup yet by the generic 1040 * code and is needed by the DMA init 1041 */ 1042 set_dev_node(&dev->dev, pcibus_to_node(dev->bus)); 1043 1044 /* Hook up default DMA ops */ 1045 set_dma_ops(&dev->dev, pci_dma_ops); 1046 dev->dev.archdata.dma_offset = PCI_DRAM_OFFSET; 1047 1048 /* Additional platform DMA/iommu setup */ 1049 phb = pci_bus_to_host(dev->bus); 1050 if (phb->controller_ops.dma_dev_setup) 1051 phb->controller_ops.dma_dev_setup(dev); 1052 1053 /* Read default IRQs and fixup if necessary */ 1054 pci_read_irq_line(dev); 1055 if (ppc_md.pci_irq_fixup) 1056 ppc_md.pci_irq_fixup(dev); 1057 1058 if (ppc_md.pcibios_bus_add_device) 1059 ppc_md.pcibios_bus_add_device(dev); 1060 } 1061 1062 int pcibios_device_add(struct pci_dev *dev) 1063 { 1064 struct irq_domain *d; 1065 1066 #ifdef CONFIG_PCI_IOV 1067 if (ppc_md.pcibios_fixup_sriov) 1068 ppc_md.pcibios_fixup_sriov(dev); 1069 #endif /* CONFIG_PCI_IOV */ 1070 1071 d = dev_get_msi_domain(&dev->bus->dev); 1072 if (d) 1073 dev_set_msi_domain(&dev->dev, d); 1074 return 0; 1075 } 1076 1077 void pcibios_set_master(struct pci_dev *dev) 1078 { 1079 /* No special bus mastering setup handling */ 1080 } 1081 1082 void pcibios_fixup_bus(struct pci_bus *bus) 1083 { 1084 /* When called from the generic PCI probe, read PCI<->PCI bridge 1085 * bases. This is -not- called when generating the PCI tree from 1086 * the OF device-tree. 1087 */ 1088 pci_read_bridge_bases(bus); 1089 1090 /* Now fixup the bus bus */ 1091 pcibios_setup_bus_self(bus); 1092 } 1093 EXPORT_SYMBOL(pcibios_fixup_bus); 1094 1095 static int skip_isa_ioresource_align(struct pci_dev *dev) 1096 { 1097 if (pci_has_flag(PCI_CAN_SKIP_ISA_ALIGN) && 1098 !(dev->bus->bridge_ctl & PCI_BRIDGE_CTL_ISA)) 1099 return 1; 1100 return 0; 1101 } 1102 1103 /* 1104 * We need to avoid collisions with `mirrored' VGA ports 1105 * and other strange ISA hardware, so we always want the 1106 * addresses to be allocated in the 0x000-0x0ff region 1107 * modulo 0x400. 1108 * 1109 * Why? Because some silly external IO cards only decode 1110 * the low 10 bits of the IO address. The 0x00-0xff region 1111 * is reserved for motherboard devices that decode all 16 1112 * bits, so it's ok to allocate at, say, 0x2800-0x28ff, 1113 * but we want to try to avoid allocating at 0x2900-0x2bff 1114 * which might have be mirrored at 0x0100-0x03ff.. 1115 */ 1116 resource_size_t pcibios_align_resource(void *data, const struct resource *res, 1117 resource_size_t size, resource_size_t align) 1118 { 1119 struct pci_dev *dev = data; 1120 resource_size_t start = res->start; 1121 1122 if (res->flags & IORESOURCE_IO) { 1123 if (skip_isa_ioresource_align(dev)) 1124 return start; 1125 if (start & 0x300) 1126 start = (start + 0x3ff) & ~0x3ff; 1127 } 1128 1129 return start; 1130 } 1131 EXPORT_SYMBOL(pcibios_align_resource); 1132 1133 /* 1134 * Reparent resource children of pr that conflict with res 1135 * under res, and make res replace those children. 1136 */ 1137 static int reparent_resources(struct resource *parent, 1138 struct resource *res) 1139 { 1140 struct resource *p, **pp; 1141 struct resource **firstpp = NULL; 1142 1143 for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) { 1144 if (p->end < res->start) 1145 continue; 1146 if (res->end < p->start) 1147 break; 1148 if (p->start < res->start || p->end > res->end) 1149 return -1; /* not completely contained */ 1150 if (firstpp == NULL) 1151 firstpp = pp; 1152 } 1153 if (firstpp == NULL) 1154 return -1; /* didn't find any conflicting entries? */ 1155 res->parent = parent; 1156 res->child = *firstpp; 1157 res->sibling = *pp; 1158 *firstpp = res; 1159 *pp = NULL; 1160 for (p = res->child; p != NULL; p = p->sibling) { 1161 p->parent = res; 1162 pr_debug("PCI: Reparented %s %pR under %s\n", 1163 p->name, p, res->name); 1164 } 1165 return 0; 1166 } 1167 1168 /* 1169 * Handle resources of PCI devices. If the world were perfect, we could 1170 * just allocate all the resource regions and do nothing more. It isn't. 1171 * On the other hand, we cannot just re-allocate all devices, as it would 1172 * require us to know lots of host bridge internals. So we attempt to 1173 * keep as much of the original configuration as possible, but tweak it 1174 * when it's found to be wrong. 1175 * 1176 * Known BIOS problems we have to work around: 1177 * - I/O or memory regions not configured 1178 * - regions configured, but not enabled in the command register 1179 * - bogus I/O addresses above 64K used 1180 * - expansion ROMs left enabled (this may sound harmless, but given 1181 * the fact the PCI specs explicitly allow address decoders to be 1182 * shared between expansion ROMs and other resource regions, it's 1183 * at least dangerous) 1184 * 1185 * Our solution: 1186 * (1) Allocate resources for all buses behind PCI-to-PCI bridges. 1187 * This gives us fixed barriers on where we can allocate. 1188 * (2) Allocate resources for all enabled devices. If there is 1189 * a collision, just mark the resource as unallocated. Also 1190 * disable expansion ROMs during this step. 1191 * (3) Try to allocate resources for disabled devices. If the 1192 * resources were assigned correctly, everything goes well, 1193 * if they weren't, they won't disturb allocation of other 1194 * resources. 1195 * (4) Assign new addresses to resources which were either 1196 * not configured at all or misconfigured. If explicitly 1197 * requested by the user, configure expansion ROM address 1198 * as well. 1199 */ 1200 1201 static void pcibios_allocate_bus_resources(struct pci_bus *bus) 1202 { 1203 struct pci_bus *b; 1204 int i; 1205 struct resource *res, *pr; 1206 1207 pr_debug("PCI: Allocating bus resources for %04x:%02x...\n", 1208 pci_domain_nr(bus), bus->number); 1209 1210 pci_bus_for_each_resource(bus, res, i) { 1211 if (!res || !res->flags || res->start > res->end || res->parent) 1212 continue; 1213 1214 /* If the resource was left unset at this point, we clear it */ 1215 if (res->flags & IORESOURCE_UNSET) 1216 goto clear_resource; 1217 1218 if (bus->parent == NULL) 1219 pr = (res->flags & IORESOURCE_IO) ? 1220 &ioport_resource : &iomem_resource; 1221 else { 1222 pr = pci_find_parent_resource(bus->self, res); 1223 if (pr == res) { 1224 /* this happens when the generic PCI 1225 * code (wrongly) decides that this 1226 * bridge is transparent -- paulus 1227 */ 1228 continue; 1229 } 1230 } 1231 1232 pr_debug("PCI: %s (bus %d) bridge rsrc %d: %pR, parent %p (%s)\n", 1233 bus->self ? pci_name(bus->self) : "PHB", bus->number, 1234 i, res, pr, (pr && pr->name) ? pr->name : "nil"); 1235 1236 if (pr && !(pr->flags & IORESOURCE_UNSET)) { 1237 struct pci_dev *dev = bus->self; 1238 1239 if (request_resource(pr, res) == 0) 1240 continue; 1241 /* 1242 * Must be a conflict with an existing entry. 1243 * Move that entry (or entries) under the 1244 * bridge resource and try again. 1245 */ 1246 if (reparent_resources(pr, res) == 0) 1247 continue; 1248 1249 if (dev && i < PCI_BRIDGE_RESOURCE_NUM && 1250 pci_claim_bridge_resource(dev, 1251 i + PCI_BRIDGE_RESOURCES) == 0) 1252 continue; 1253 } 1254 pr_warn("PCI: Cannot allocate resource region %d of PCI bridge %d, will remap\n", 1255 i, bus->number); 1256 clear_resource: 1257 /* The resource might be figured out when doing 1258 * reassignment based on the resources required 1259 * by the downstream PCI devices. Here we set 1260 * the size of the resource to be 0 in order to 1261 * save more space. 1262 */ 1263 res->start = 0; 1264 res->end = -1; 1265 res->flags = 0; 1266 } 1267 1268 list_for_each_entry(b, &bus->children, node) 1269 pcibios_allocate_bus_resources(b); 1270 } 1271 1272 static inline void alloc_resource(struct pci_dev *dev, int idx) 1273 { 1274 struct resource *pr, *r = &dev->resource[idx]; 1275 1276 pr_debug("PCI: Allocating %s: Resource %d: %pR\n", 1277 pci_name(dev), idx, r); 1278 1279 pr = pci_find_parent_resource(dev, r); 1280 if (!pr || (pr->flags & IORESOURCE_UNSET) || 1281 request_resource(pr, r) < 0) { 1282 printk(KERN_WARNING "PCI: Cannot allocate resource region %d" 1283 " of device %s, will remap\n", idx, pci_name(dev)); 1284 if (pr) 1285 pr_debug("PCI: parent is %p: %pR\n", pr, pr); 1286 /* We'll assign a new address later */ 1287 r->flags |= IORESOURCE_UNSET; 1288 r->end -= r->start; 1289 r->start = 0; 1290 } 1291 } 1292 1293 static void __init pcibios_allocate_resources(int pass) 1294 { 1295 struct pci_dev *dev = NULL; 1296 int idx, disabled; 1297 u16 command; 1298 struct resource *r; 1299 1300 for_each_pci_dev(dev) { 1301 pci_read_config_word(dev, PCI_COMMAND, &command); 1302 for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) { 1303 r = &dev->resource[idx]; 1304 if (r->parent) /* Already allocated */ 1305 continue; 1306 if (!r->flags || (r->flags & IORESOURCE_UNSET)) 1307 continue; /* Not assigned at all */ 1308 /* We only allocate ROMs on pass 1 just in case they 1309 * have been screwed up by firmware 1310 */ 1311 if (idx == PCI_ROM_RESOURCE ) 1312 disabled = 1; 1313 if (r->flags & IORESOURCE_IO) 1314 disabled = !(command & PCI_COMMAND_IO); 1315 else 1316 disabled = !(command & PCI_COMMAND_MEMORY); 1317 if (pass == disabled) 1318 alloc_resource(dev, idx); 1319 } 1320 if (pass) 1321 continue; 1322 r = &dev->resource[PCI_ROM_RESOURCE]; 1323 if (r->flags) { 1324 /* Turn the ROM off, leave the resource region, 1325 * but keep it unregistered. 1326 */ 1327 u32 reg; 1328 pci_read_config_dword(dev, dev->rom_base_reg, ®); 1329 if (reg & PCI_ROM_ADDRESS_ENABLE) { 1330 pr_debug("PCI: Switching off ROM of %s\n", 1331 pci_name(dev)); 1332 r->flags &= ~IORESOURCE_ROM_ENABLE; 1333 pci_write_config_dword(dev, dev->rom_base_reg, 1334 reg & ~PCI_ROM_ADDRESS_ENABLE); 1335 } 1336 } 1337 } 1338 } 1339 1340 static void __init pcibios_reserve_legacy_regions(struct pci_bus *bus) 1341 { 1342 struct pci_controller *hose = pci_bus_to_host(bus); 1343 resource_size_t offset; 1344 struct resource *res, *pres; 1345 int i; 1346 1347 pr_debug("Reserving legacy ranges for domain %04x\n", pci_domain_nr(bus)); 1348 1349 /* Check for IO */ 1350 if (!(hose->io_resource.flags & IORESOURCE_IO)) 1351 goto no_io; 1352 offset = (unsigned long)hose->io_base_virt - _IO_BASE; 1353 res = kzalloc(sizeof(struct resource), GFP_KERNEL); 1354 BUG_ON(res == NULL); 1355 res->name = "Legacy IO"; 1356 res->flags = IORESOURCE_IO; 1357 res->start = offset; 1358 res->end = (offset + 0xfff) & 0xfffffffful; 1359 pr_debug("Candidate legacy IO: %pR\n", res); 1360 if (request_resource(&hose->io_resource, res)) { 1361 printk(KERN_DEBUG 1362 "PCI %04x:%02x Cannot reserve Legacy IO %pR\n", 1363 pci_domain_nr(bus), bus->number, res); 1364 kfree(res); 1365 } 1366 1367 no_io: 1368 /* Check for memory */ 1369 for (i = 0; i < 3; i++) { 1370 pres = &hose->mem_resources[i]; 1371 offset = hose->mem_offset[i]; 1372 if (!(pres->flags & IORESOURCE_MEM)) 1373 continue; 1374 pr_debug("hose mem res: %pR\n", pres); 1375 if ((pres->start - offset) <= 0xa0000 && 1376 (pres->end - offset) >= 0xbffff) 1377 break; 1378 } 1379 if (i >= 3) 1380 return; 1381 res = kzalloc(sizeof(struct resource), GFP_KERNEL); 1382 BUG_ON(res == NULL); 1383 res->name = "Legacy VGA memory"; 1384 res->flags = IORESOURCE_MEM; 1385 res->start = 0xa0000 + offset; 1386 res->end = 0xbffff + offset; 1387 pr_debug("Candidate VGA memory: %pR\n", res); 1388 if (request_resource(pres, res)) { 1389 printk(KERN_DEBUG 1390 "PCI %04x:%02x Cannot reserve VGA memory %pR\n", 1391 pci_domain_nr(bus), bus->number, res); 1392 kfree(res); 1393 } 1394 } 1395 1396 void __init pcibios_resource_survey(void) 1397 { 1398 struct pci_bus *b; 1399 1400 /* Allocate and assign resources */ 1401 list_for_each_entry(b, &pci_root_buses, node) 1402 pcibios_allocate_bus_resources(b); 1403 if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC)) { 1404 pcibios_allocate_resources(0); 1405 pcibios_allocate_resources(1); 1406 } 1407 1408 /* Before we start assigning unassigned resource, we try to reserve 1409 * the low IO area and the VGA memory area if they intersect the 1410 * bus available resources to avoid allocating things on top of them 1411 */ 1412 if (!pci_has_flag(PCI_PROBE_ONLY)) { 1413 list_for_each_entry(b, &pci_root_buses, node) 1414 pcibios_reserve_legacy_regions(b); 1415 } 1416 1417 /* Now, if the platform didn't decide to blindly trust the firmware, 1418 * we proceed to assigning things that were left unassigned 1419 */ 1420 if (!pci_has_flag(PCI_PROBE_ONLY)) { 1421 pr_debug("PCI: Assigning unassigned resources...\n"); 1422 pci_assign_unassigned_resources(); 1423 } 1424 } 1425 1426 /* This is used by the PCI hotplug driver to allocate resource 1427 * of newly plugged busses. We can try to consolidate with the 1428 * rest of the code later, for now, keep it as-is as our main 1429 * resource allocation function doesn't deal with sub-trees yet. 1430 */ 1431 void pcibios_claim_one_bus(struct pci_bus *bus) 1432 { 1433 struct pci_dev *dev; 1434 struct pci_bus *child_bus; 1435 1436 list_for_each_entry(dev, &bus->devices, bus_list) { 1437 int i; 1438 1439 for (i = 0; i < PCI_NUM_RESOURCES; i++) { 1440 struct resource *r = &dev->resource[i]; 1441 1442 if (r->parent || !r->start || !r->flags) 1443 continue; 1444 1445 pr_debug("PCI: Claiming %s: Resource %d: %pR\n", 1446 pci_name(dev), i, r); 1447 1448 if (pci_claim_resource(dev, i) == 0) 1449 continue; 1450 1451 pci_claim_bridge_resource(dev, i); 1452 } 1453 } 1454 1455 list_for_each_entry(child_bus, &bus->children, node) 1456 pcibios_claim_one_bus(child_bus); 1457 } 1458 EXPORT_SYMBOL_GPL(pcibios_claim_one_bus); 1459 1460 1461 /* pcibios_finish_adding_to_bus 1462 * 1463 * This is to be called by the hotplug code after devices have been 1464 * added to a bus, this include calling it for a PHB that is just 1465 * being added 1466 */ 1467 void pcibios_finish_adding_to_bus(struct pci_bus *bus) 1468 { 1469 pr_debug("PCI: Finishing adding to hotplug bus %04x:%02x\n", 1470 pci_domain_nr(bus), bus->number); 1471 1472 /* Allocate bus and devices resources */ 1473 pcibios_allocate_bus_resources(bus); 1474 pcibios_claim_one_bus(bus); 1475 if (!pci_has_flag(PCI_PROBE_ONLY)) { 1476 if (bus->self) 1477 pci_assign_unassigned_bridge_resources(bus->self); 1478 else 1479 pci_assign_unassigned_bus_resources(bus); 1480 } 1481 1482 /* Add new devices to global lists. Register in proc, sysfs. */ 1483 pci_bus_add_devices(bus); 1484 } 1485 EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus); 1486 1487 int pcibios_enable_device(struct pci_dev *dev, int mask) 1488 { 1489 struct pci_controller *phb = pci_bus_to_host(dev->bus); 1490 1491 if (phb->controller_ops.enable_device_hook) 1492 if (!phb->controller_ops.enable_device_hook(dev)) 1493 return -EINVAL; 1494 1495 return pci_enable_resources(dev, mask); 1496 } 1497 1498 void pcibios_disable_device(struct pci_dev *dev) 1499 { 1500 struct pci_controller *phb = pci_bus_to_host(dev->bus); 1501 1502 if (phb->controller_ops.disable_device) 1503 phb->controller_ops.disable_device(dev); 1504 } 1505 1506 resource_size_t pcibios_io_space_offset(struct pci_controller *hose) 1507 { 1508 return (unsigned long) hose->io_base_virt - _IO_BASE; 1509 } 1510 1511 static void pcibios_setup_phb_resources(struct pci_controller *hose, 1512 struct list_head *resources) 1513 { 1514 struct resource *res; 1515 resource_size_t offset; 1516 int i; 1517 1518 /* Hookup PHB IO resource */ 1519 res = &hose->io_resource; 1520 1521 if (!res->flags) { 1522 pr_debug("PCI: I/O resource not set for host" 1523 " bridge %pOF (domain %d)\n", 1524 hose->dn, hose->global_number); 1525 } else { 1526 offset = pcibios_io_space_offset(hose); 1527 1528 pr_debug("PCI: PHB IO resource = %pR off 0x%08llx\n", 1529 res, (unsigned long long)offset); 1530 pci_add_resource_offset(resources, res, offset); 1531 } 1532 1533 /* Hookup PHB Memory resources */ 1534 for (i = 0; i < 3; ++i) { 1535 res = &hose->mem_resources[i]; 1536 if (!res->flags) 1537 continue; 1538 1539 offset = hose->mem_offset[i]; 1540 pr_debug("PCI: PHB MEM resource %d = %pR off 0x%08llx\n", i, 1541 res, (unsigned long long)offset); 1542 1543 pci_add_resource_offset(resources, res, offset); 1544 } 1545 } 1546 1547 /* 1548 * Null PCI config access functions, for the case when we can't 1549 * find a hose. 1550 */ 1551 #define NULL_PCI_OP(rw, size, type) \ 1552 static int \ 1553 null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \ 1554 { \ 1555 return PCIBIOS_DEVICE_NOT_FOUND; \ 1556 } 1557 1558 static int 1559 null_read_config(struct pci_bus *bus, unsigned int devfn, int offset, 1560 int len, u32 *val) 1561 { 1562 return PCIBIOS_DEVICE_NOT_FOUND; 1563 } 1564 1565 static int 1566 null_write_config(struct pci_bus *bus, unsigned int devfn, int offset, 1567 int len, u32 val) 1568 { 1569 return PCIBIOS_DEVICE_NOT_FOUND; 1570 } 1571 1572 static struct pci_ops null_pci_ops = 1573 { 1574 .read = null_read_config, 1575 .write = null_write_config, 1576 }; 1577 1578 /* 1579 * These functions are used early on before PCI scanning is done 1580 * and all of the pci_dev and pci_bus structures have been created. 1581 */ 1582 static struct pci_bus * 1583 fake_pci_bus(struct pci_controller *hose, int busnr) 1584 { 1585 static struct pci_bus bus; 1586 1587 if (hose == NULL) { 1588 printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr); 1589 } 1590 bus.number = busnr; 1591 bus.sysdata = hose; 1592 bus.ops = hose? hose->ops: &null_pci_ops; 1593 return &bus; 1594 } 1595 1596 #define EARLY_PCI_OP(rw, size, type) \ 1597 int early_##rw##_config_##size(struct pci_controller *hose, int bus, \ 1598 int devfn, int offset, type value) \ 1599 { \ 1600 return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \ 1601 devfn, offset, value); \ 1602 } 1603 1604 EARLY_PCI_OP(read, byte, u8 *) 1605 EARLY_PCI_OP(read, word, u16 *) 1606 EARLY_PCI_OP(read, dword, u32 *) 1607 EARLY_PCI_OP(write, byte, u8) 1608 EARLY_PCI_OP(write, word, u16) 1609 EARLY_PCI_OP(write, dword, u32) 1610 1611 int early_find_capability(struct pci_controller *hose, int bus, int devfn, 1612 int cap) 1613 { 1614 return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap); 1615 } 1616 1617 struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus) 1618 { 1619 struct pci_controller *hose = bus->sysdata; 1620 1621 return of_node_get(hose->dn); 1622 } 1623 1624 /** 1625 * pci_scan_phb - Given a pci_controller, setup and scan the PCI bus 1626 * @hose: Pointer to the PCI host controller instance structure 1627 */ 1628 void pcibios_scan_phb(struct pci_controller *hose) 1629 { 1630 LIST_HEAD(resources); 1631 struct pci_bus *bus; 1632 struct device_node *node = hose->dn; 1633 int mode; 1634 1635 pr_debug("PCI: Scanning PHB %pOF\n", node); 1636 1637 /* Get some IO space for the new PHB */ 1638 pcibios_setup_phb_io_space(hose); 1639 1640 /* Wire up PHB bus resources */ 1641 pcibios_setup_phb_resources(hose, &resources); 1642 1643 hose->busn.start = hose->first_busno; 1644 hose->busn.end = hose->last_busno; 1645 hose->busn.flags = IORESOURCE_BUS; 1646 pci_add_resource(&resources, &hose->busn); 1647 1648 /* Create an empty bus for the toplevel */ 1649 bus = pci_create_root_bus(hose->parent, hose->first_busno, 1650 hose->ops, hose, &resources); 1651 if (bus == NULL) { 1652 pr_err("Failed to create bus for PCI domain %04x\n", 1653 hose->global_number); 1654 pci_free_resource_list(&resources); 1655 return; 1656 } 1657 hose->bus = bus; 1658 1659 /* Get probe mode and perform scan */ 1660 mode = PCI_PROBE_NORMAL; 1661 if (node && hose->controller_ops.probe_mode) 1662 mode = hose->controller_ops.probe_mode(bus); 1663 pr_debug(" probe mode: %d\n", mode); 1664 if (mode == PCI_PROBE_DEVTREE) 1665 of_scan_bus(node, bus); 1666 1667 if (mode == PCI_PROBE_NORMAL) { 1668 pci_bus_update_busn_res_end(bus, 255); 1669 hose->last_busno = pci_scan_child_bus(bus); 1670 pci_bus_update_busn_res_end(bus, hose->last_busno); 1671 } 1672 1673 /* Platform gets a chance to do some global fixups before 1674 * we proceed to resource allocation 1675 */ 1676 if (ppc_md.pcibios_fixup_phb) 1677 ppc_md.pcibios_fixup_phb(hose); 1678 1679 /* Configure PCI Express settings */ 1680 if (bus && !pci_has_flag(PCI_PROBE_ONLY)) { 1681 struct pci_bus *child; 1682 list_for_each_entry(child, &bus->children, node) 1683 pcie_bus_configure_settings(child); 1684 } 1685 } 1686 EXPORT_SYMBOL_GPL(pcibios_scan_phb); 1687 1688 static void fixup_hide_host_resource_fsl(struct pci_dev *dev) 1689 { 1690 int i, class = dev->class >> 8; 1691 /* When configured as agent, programming interface = 1 */ 1692 int prog_if = dev->class & 0xf; 1693 1694 if ((class == PCI_CLASS_PROCESSOR_POWERPC || 1695 class == PCI_CLASS_BRIDGE_OTHER) && 1696 (dev->hdr_type == PCI_HEADER_TYPE_NORMAL) && 1697 (prog_if == 0) && 1698 (dev->bus->parent == NULL)) { 1699 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { 1700 dev->resource[i].start = 0; 1701 dev->resource[i].end = 0; 1702 dev->resource[i].flags = 0; 1703 } 1704 } 1705 } 1706 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl); 1707 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl); 1708 1709 1710 static int __init discover_phbs(void) 1711 { 1712 if (ppc_md.discover_phbs) 1713 ppc_md.discover_phbs(); 1714 1715 return 0; 1716 } 1717 core_initcall(discover_phbs); 1718